Johns Manville Air Handling Systems Product Guide
Air Handling Systems Product GuideFiber Glass InsulationMat-Faced Micro-Aire FIBER GLASS DUCT BOARDFiber glass duct board for fabrication intorectangular ductwork, the airstream side ofthe duct board features a fiber glass mat foruse at velocities up to 5000 fpm (25.4 m/sec.). Type 475 & Type 800Operating Temperature Limit:250 F (121 C)Maximum Air Velocity:5000 fpm (30.5 m/sec)SuperDuct RC SystemEnviroAire COATED, HIGH-PERFORMANCEAIR DUCT BOARDFORMALDEHYDE-FREE FIBER GLASSDUCT BOARDSuperDuct RC Air Duct Board is the primarycomponent of the system, which also consistsof SuperSeal coating products. SuperDuct RCfeatures an airstream surface protected withJM’s exclusive Reinforced Coating Systemthat combines state-of-the-art Permacoteacrylic coating with a flexible glass clothreinforcement.EnviroAire Formaldehyde-free Fiber Glass DuctBoard* is produced from durable glass fibers,bonded with a thermosetting resin. EnviroAireDuct Board is ideal for residential HVACapplications to quietly and efficientlydistribute cool or warm air for greaterroom-to-room comfort.Operating Temperature Limit:250 F (121 C)Maximum Air Velocity:6000 fpm (30.5 m/sec)Maximum Air Velocity:6000 fpm (30.5 m/sec)THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in11½2mm Type254753880051800(hr ft2 ºF)/Btu m2 ºC/W4.30.766.51.158.71.53JMCOM100290in mm 125 250 5001 25 0.07 0.25 0.631½ 38 0.10 0.42 0.912 51 0.17 0.63 06*Limited availability. Contact your local JM sales representativefor further information.THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in11½2ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)Type475800800Operating Temperature Limit:250 F (121 C)mm Type254753880051800(hr ft2 ºF)/Btu m2 ºC/W4.30.766.51.158.71.53ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.700.850.95Type475800800in mm 125 250 5001 25 0.04 0.27 0.711½ 38 0.11 0.45 0.962 51 0.14 0.81 1.1010000.961.071.07Recycled Content:20% post consumerRecycled Content:20% post consumerUL 181, Class 1 Rigid Air Duct ListedASTM G21 and G22Conforms to ASHRAE 62ICC CompliantNFPA 90A and 90BUL 181, Class 1 Rigid Air Duct ListedNFPA 90A and 90BConforms to ASHRAE 62ASTM G21 and G22Canada: CGSB THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in1½mm38(hr ft2 ºF)/Btu6.5m2 ºC/W1.14ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.750.901.00Type in mm 125 250 500 1000 2000 4000 NRC800 1½ 38 0.11 0.45 0.96 1.07 1.06 1.00 0.90The physical and chemical properties of the Air Handling Systems Products listed herein represent typical,average values obtained in accordance with accepted test methods and are subject to normal manufacturingvariations. They are supplied as a technical service and are subject to change without notice. Numericalflame spread and smoke developed ratings are not intended to reflect hazards presented by these or any othermaterials under actual fire conditions. Check with the Regional Sales Office nearest you to ensure currentinformation. All Johns Manville products are sold subject to Johns Manville’s standard Terms and Conditionsincluding Limited Warranty and Limitation of Remedy. For a copy of the Johns Manville standard Terms andConditions, Limited Warranty and Limitation of Remedy, and information on other Johns Manville thermalinsulations and systems, call (800) 654-3103.Air Handling Systems Product GuideUL 181, Class 1 Rigid Air Duct ListedNFPA 90A and 90BConforms to ASHRAE 62ASTM G21 and G22ICC CompliantCanada: CGSB 51.10CAN/ULC-S110MFiber Glass Insulation717 17th St.Denver, CO 80202(800) 654-3103specJM.comAHS-187 05/10 (Replaces 10/08)Printed on recycled paper. 2010 Johns Manville. Printed in USA.
LinacousticRCFIBER GLASS DUCT LINER WITHREINFORCED COATING MicroliteXG LinaTex PermacoteLinacousticR-30 SpiracousticPlusSystemFIBER GLASS LINERS FOR ROUND METAL DUCTSFORMALDEHYDE-FREE FIBER GLASSDUCT WRAPLinaTex is a flexible duct liner made fromcontinuous glass fibers bonded with athermosetting resin. The airstream surfaceis protected with a black, high-density glassmat. The mat offers exceptional durability inexposure to air velocity in systems operatingat velocities up to 5000 fpm (25.4 m/sec).R-300 is a rigid fiber glass plenum liner boardwith the durable acrylic Permacote surfacetreatment.A group of fiber glass duct liners for roundducts of virtually any size. Products have thedurable acrylic Permacote surface treatment.Fiber glass duct wrap insulation used on theexterior of rectangular and round metal ductsas thermal insulation.Operating Temperature Limit:250 F (121 C) VSD for very small diameters SD for small diameters LD for large diametersOperating Temperature Limit:250 F (121 C)TEXTILE FIBER DUCT LINERRIGID FIBER GLASS PLENUM LINER BOARD 800SeriesSpin-Glas FIBER GLASS DUCT ANDEQUIPMENT ble duct liner insulation with theairstream surface protected with JM’sexclusive Reinforced Coating System thatcombines state-of-the-art Permacoteacrylic coating with a flexible glass clothreinforcement.Operating Temperature Limit:250 F (121 C)FireResistantOperating Temperature Limit:250 F (121 C)Maximum Air Velocity:6000 fpm (30.5 yPERFORMANCE CHARACTERISTICS Formaldehyde- freeTHERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in½11½2mm13253851(hr ft2 ºF)/Btu2.24.26.38.0ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)in½11½2mm13253851125 250 500 1000 2000 40000.07 0.20 0.44 0.66 0.84 0.930.08 0.31 0.64 0.84 0.97 1.030.10 0.47 0.85 1.01 1.02 0.990.25 0.66 1.00 1.05 1.02 1.01SPECIF ICAT IONCOMPLIANCERecycled Content:20% post consumer5% pre consumerFor more information, visit us atspecJM.comType in300 ½3001200 ½1501150 1½ASTM C1071, Type I, FlexibleASTM G21 and G22ASTM D5116-State of WashingtonSMACNA Application Standards for Duct LinersNAIMA Fibrous Glass Duct Liner InstallationNFPA 90A and 90B, FHC 25/50ICC CompliantConforms to ASHRAE 62California Title 24Canada: CGSB 51-GP-11MCAN/ULC S102-M88mm1325132538(hr ft2 ºF)/Btu m2 ºC/W2.60.454.20.742.40.423.70.655.50.97THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in11½2Type300300200150150in mm 125 250 500 1000 2000½ 13 0.03 0.14 0.30 0.55 0.721 25 0.08 0.27 0.62 0.86 0.92½ 13 0.06 0.13 0.28 0.52 0.711 25 0.09 0.24 0.50 0.70 0.861½ 38 0.18 0.37 0.68 0.90 1.0240000.840.910.740.870.93mm253851(hr ft2 ºF)/Btu4.36.38.7THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.m2 ºC/W0.761.111.53in11½2*Recycled Content:66%–83% pre consumer(hr ft2 ºF)/Btu4.36.48.4m2 0 500 10000.26 0.69 1.000.52 1.01 1.070.73 1.10 1.1020001.071.031.0440001.020.971.03Recycled Content:20% post consumerNRC0.750.901.00in11½2mm253851125 250 5000.05 0.21 0.710.10 0.39 1.020.17 0.63 1.1010001.011.081.0520001.071.041.04Recycled Content:20% post consumerdependent on material typeASTM C1071, Type I, FlexibleASTM G21 and G22ASTM D5116-State of WashingtonSMACNA Application Standards for Duct LinersNAIMA Fibrous Glass Duct Liner InstallationNFPA 90A and 90B, FHC 25/50Conforms to ASHRAE 62California Title 24Canada: CGSB 51-GP-11MCAN/ULC S102-M88INSTALLEDType in75 1½75275 2.3753100 1½1002150 1½1502ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.450.650.400.600.75mm253851THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.*2 in. is not stocked; special order only.ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.550.700.850.95Unfaced: 450 F (232 C)Faced: unfaced side 450 F (232 C)faced side 150 F (66 C)Maximum Air Velocity:6000 fpm (30.5 m/sec)THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.m2 ºC/W0.390.741.111.41Operating Temperature Limit:Operating Temperature Limit:250 F (121 C)Maximum Air Velocity:5000 fpm (25.4 m/sec)MoistureControlRecycledContentMaximum Air Velocity:6000 fpm (30.5 m/sec)800 Series Spin-Glas can be used in plainor faced form to insulate heating ducts andequipment. 800 Series Spin-Glas is ideal forapplication on commercial and industrialheating, air conditioning, power and 3851587638513851(hr ft2 ºF )/Btu m2 0.836.31.11OUT OF PACKAGEType in mm (hr ft2 ºF )/Btu m2 ºC/W75 1½385.20.92752516.91.2275 2.3588.01.417537610.31.81100 1½385.60.991002517.41.30150 1½386.01.061502518.01.41THERMAL CONDUCTIVITY (“k”)(ASTM C 177 AND C 518)Type in812 1½–4813 1½–4814 1–4815 1–2½817 1–2mm Btu in/(hr ft2 F) W/m 3325–640.220.03225–510.220.032ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)Type812812813813814814815815817817in mm 125 250 500 1000 2000 4000 NRC1 25 0.07 0.24 0.63 0.87 1.00 1.02 0.702 51 0.24 0.68 1.10 1.13 1.10 1.07 1.001 25 0.08 0.27 0.69 0.95 1.05 1.02 0.752 51 0.19 0.88 1.15 1.14 1.10 1.07 1.051 25 0.06 0.29 0.75 0.99 1.04 1.02 0.752 51 0.24 1.00 1.11 1.08 1.06 1.05 1.051 25 0.03 0.32 0.80 1.04 1.05 1.05 0.802 51 0.27 0.91 1.11 1.09 1.09 1.09 1.051 25 0.10 0.35 0.85 1.04 1.05 1.03 0.802 51 0.38 0.93 1.10 1.07 1.07 1.07 1.05Recycled Content:20% post consumer5% pre consumerASTM C1071, Type IIASTM G21 and G22ASTM D5116-State of WashingtonSMACNA Application Standards for Duct LinersNAIMA Fibrous Glass Duct Liner InstallationNFPA 90A and 90B, FHC 25/50Conforms to ASHRAE 62California Title 24NYC MEA # 353-93-MCanada: CGSB 51.10CAN/ULC S102-M88ASTM C1071 Air Erosion Test / UL 181ASTM G21 and G22ASTM E84, FHC 25/50NFPA 90A and 90BASTM D5116-State of WashingtonASHRAE 62ULC S102-M88ASTM C553 Type II – Type 75, 100 and 150 Type III – Type 150ASTM C1290ASTM C1139, Type II Grade I – Type 75 Faced Grade II – Type 100 Faced Grade III – Type 150 FacedASMT E84, FHC 25/50 – FSK FacingASTM C1136, Type II – FSK FacingNYC MEA # 40-75-MCanada: CGSB 51-GP-11MCAN/ULC S102-M88ASTM C612, Type 1A and 1B (813, 814, 815, 817)ASTM C553, Type III (812 Only)ASTM C795ASTM C1136 Type I – AP Facing Type II – AP and FSK FacingASTM E84, UL 723, NFPA 255FHC 25/50, NFPA 90A and 90BHH-I-558C, Form B, Type I, Class 7 (812, 813, 814, 815)MIL-I-24244CNRC 1.36Canada: CGSB 51-GP-10MCAN/ULC S102-M88
Air Handling Systems Product GuideFiber Glass InsulationMat-Faced Micro-Aire FIBER GLASS DUCT BOARDFiber glass duct board for fabrication intorectangular ductwork, the airstream side ofthe duct board features a fiber glass mat foruse at velocities up to 5000 fpm (25.4 m/sec.). Type 475 & Type 800Operating Temperature Limit:250 F (121 C)Maximum Air Velocity:5000 fpm (30.5 m/sec)SuperDuct RC SystemEnviroAire COATED, HIGH-PERFORMANCEAIR DUCT BOARDFORMALDEHYDE-FREE FIBER GLASSDUCT BOARDSuperDuct RC Air Duct Board is the primarycomponent of the system, which also consistsof SuperSeal coating products. SuperDuct RCfeatures an airstream surface protected withJM’s exclusive Reinforced Coating Systemthat combines state-of-the-art Permacoteacrylic coating with a flexible glass clothreinforcement.EnviroAire Formaldehyde-free Fiber Glass DuctBoard* is produced from durable glass fibers,bonded with a thermosetting resin. EnviroAireDuct Board is ideal for residential HVACapplications to quietly and efficientlydistribute cool or warm air for greaterroom-to-room comfort.Operating Temperature Limit:250 F (121 C)Maximum Air Velocity:6000 fpm (30.5 m/sec)Maximum Air Velocity:6000 fpm (30.5 m/sec)THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in11½2mm Type254753880051800(hr ft2 ºF)/Btu m2 ºC/W4.30.766.51.158.71.53JMCOM100290in mm 125 250 5001 25 0.07 0.25 0.631½ 38 0.10 0.42 0.912 51 0.17 0.63 06*Limited availability. Contact your local JM sales representativefor further information.THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in11½2ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)Type475800800Operating Temperature Limit:250 F (121 C)mm Type254753880051800(hr ft2 ºF)/Btu m2 ºC/W4.30.766.51.158.71.53ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.700.850.95Type475800800in mm 125 250 5001 25 0.04 0.27 0.711½ 38 0.11 0.45 0.962 51 0.14 0.81 1.1010000.961.071.07Recycled Content:20% post consumerRecycled Content:20% post consumerUL 181, Class 1 Rigid Air Duct ListedASTM G21 and G22Conforms to ASHRAE 62ICC CompliantNFPA 90A and 90BUL 181, Class 1 Rigid Air Duct ListedNFPA 90A and 90BConforms to ASHRAE 62ASTM G21 and G22Canada: CGSB THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in1½mm38(hr ft2 ºF)/Btu6.5m2 ºC/W1.14ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.750.901.00Type in mm 125 250 500 1000 2000 4000 NRC800 1½ 38 0.11 0.45 0.96 1.07 1.06 1.00 0.90The physical and chemical properties of the Air Handling Systems Products listed herein represent typical,average values obtained in accordance with accepted test methods and are subject to normal manufacturingvariations. They are supplied as a technical service and are subject to change without notice. Numericalflame spread and smoke developed ratings are not intended to reflect hazards presented by these or any othermaterials under actual fire conditions. Check with the Regional Sales Office nearest you to ensure currentinformation. All Johns Manville products are sold subject to Johns Manville’s standard Terms and Conditionsincluding Limited Warranty and Limitation of Remedy. For a copy of the Johns Manville standard Terms andConditions, Limited Warranty and Limitation of Remedy, and information on other Johns Manville thermalinsulations and systems, call (800) 654-3103.Air Handling Systems Product GuideUL 181, Class 1 Rigid Air Duct ListedNFPA 90A and 90BConforms to ASHRAE 62ASTM G21 and G22ICC CompliantCanada: CGSB 51.10CAN/ULC-S110MFiber Glass Insulation717 17th St.Denver, CO 80202(800) 654-3103specJM.comAHS-187 05/10 (Replaces 10/08)Printed on recycled paper. 2010 Johns Manville. Printed in USA.
Linacoustic RCFIBER GLASS DUCT LINER WITHREINFORCED COATINGMicrolite XG 800 Series Spin-Glas FIBER GLASS LINERS FOR ROUND METAL DUCTSFORMALDEHYDE-FREE FIBER GLASSDUCT WRAPFIBER GLASS DUCT ANDEQUIPMENT INSULATIONR-300 is a rigid fiber glass plenum liner boardwith the durable acrylic Permacote surfacetreatment.A group of fiber glass duct liners for roundducts of virtually any size. Products have thedurable acrylic Permacote surface treatment.Fiber glass duct wrap insulation used on theexterior of rectangular and round metal ductsas thermal insulation.Operating Temperature Limit:250 F (121 C) VSD for very small diameters SD for small diameters LD for large diametersOperating Temperature Limit:250 F (121 C)800 Series Spin-Glas can be used in plainor faced form to insulate heating ducts andequipment. 800 Series Spin-Glas is ideal forapplication on commercial and industrialheating, air conditioning, power and processequipment.LinaTex Permacote Linacoustic R-300Spiracoustic Plus SystemTEXTILE FIBER DUCT LINERRIGID FIBER GLASS PLENUM LINER BOARDLinaTex is a flexible duct liner made fromcontinuous glass fibers bonded with athermosetting resin. The airstream surfaceis protected with a black, high-density glassmat. The mat offers exceptional durability inexposure to air velocity in systems operatingat velocities up to 5000 fpm (25.4 m/sec). ThermalAcousticalDESCRIPTIONIcon KeyFlexible duct liner insulation with theairstream surface protected with JM’sexclusive Reinforced Coating System thatcombines state-of-the-art Permacoteacrylic coating with a flexible glass clothreinforcement.Operating Temperature Limit:250 F (121 C)Fire ResistantOperating Temperature Limit:250 F (121 C)Maximum Air Velocity:6000 fpm (30.5 m/sec)Products for improved indoorenvironmental qualityPERFORMANCE CHARACTERISTICSFormaldehyde-free THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in½11½2mm13253851(hr ft2 ºF)/Btu2.24.26.38.0ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)in½11½2mm13253851125 250 500 1000 2000 40000.07 0.20 0.44 0.66 0.84 0.930.08 0.31 0.64 0.84 0.97 1.030.10 0.47 0.85 1.01 1.02 0.990.25 0.66 1.00 1.05 1.02 1.01SPECIF ICAT IONCOMPLIANCERecycled Content:20% post consumer5% pre consumerFor more information, visit us atspecJM.comType in300 ½3001200 ½1501150 1½ASTM C1071, Type I, FlexibleASTM G21 and G22ASTM D5116-State of WashingtonSMACNA Application Standards for Duct LinersNAIMA Fibrous Glass Duct Liner InstallationNFPA 90A and 90B, FHC 25/50ICC CompliantConforms to ASHRAE 62California Title 24Canada: CGSB 51-GP-11MCAN/ULC S102-M88mm1325132538(hr ft2 ºF)/Btu m2 ºC/W2.60.454.20.742.40.423.70.655.50.97THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in11½2Type300300200150150in mm 125 250 500 1000 2000½ 13 0.03 0.14 0.30 0.55 0.721 25 0.08 0.27 0.62 0.86 0.92½ 13 0.06 0.13 0.28 0.52 0.711 25 0.09 0.24 0.50 0.70 0.861½ 38 0.18 0.37 0.68 0.90 1.0240000.840.910.740.870.93mm253851(hr ft2 ºF)/Btu4.36.38.7THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.m2 ºC/W0.761.111.53in11½2*Recycled Content:66%–83% pre consumer(hr ft2 ºF)/Btu4.36.48.4m2 0 500 10000.26 0.69 1.000.52 1.01 1.070.73 1.10 1.1020001.071.031.0440001.020.971.03Recycled Content:20% post consumerNRC0.750.901.00in11½2mm253851125 250 5000.05 0.21 0.710.10 0.39 1.020.17 0.63 1.1010001.011.081.0520001.071.041.04Recycled Content:20% post consumerdependent on material typeASTM C1071, Type I, FlexibleASTM G21 and G22ASTM D5116-State of WashingtonSMACNA Application Standards for Duct LinersNAIMA Fibrous Glass Duct Liner InstallationNFPA 90A and 90B, FHC 25/50Conforms to ASHRAE 62California Title 24Canada: CGSB 51-GP-11MCAN/ULC S102-M88INSTALLEDType in75 1½75275 2.3753100 1½1002150 1½1502ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.450.650.400.600.75mm253851THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.*2 in. is not stocked; special order only.ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.550.700.850.95Unfaced: 450 F (232 C)Faced: unfaced side 450 F (232 C)faced side 150 F (66 C)Maximum Air Velocity:6000 fpm (30.5 m/sec)THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.m2 ºC/W0.390.741.111.41Operating Temperature Limit:Operating Temperature Limit:250 F (121 C)Maximum Air Velocity:5000 fpm (25.4 m/sec)Moisture ControlRecycled ContentMaximum Air Velocity:6000 fpm (30.5 13851(hr ft2 ºF )/Btu m2 0.836.31.11OUT OF PACKAGEType in mm (hr ft2 ºF )/Btu m2 ºC/W75 1½385.20.92752516.91.2275 2.3588.01.417537610.31.81100 1½385.60.991002517.41.30150 1½386.01.061502518.01.41THERMAL CONDUCTIVITY (“k”)(ASTM C 177 AND C 518)Type in812 1½–4813 1½–4814 1–4815 1–2½817 1–2mm Btu in/(hr ft2 F) W/m 3325–640.220.03225–510.220.032ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)Type812812813813814814815815817817in mm 125 250 500 1000 2000 4000 NRC1 25 0.07 0.24 0.63 0.87 1.00 1.02 0.702 51 0.24 0.68 1.10 1.13 1.10 1.07 1.001 25 0.08 0.27 0.69 0.95 1.05 1.02 0.752 51 0.19 0.88 1.15 1.14 1.10 1.07 1.051 25 0.06 0.29 0.75 0.99 1.04 1.02 0.752 51 0.24 1.00 1.11 1.08 1.06 1.05 1.051 25 0.03 0.32 0.80 1.04 1.05 1.05 0.802 51 0.27 0.91 1.11 1.09 1.09 1.09 1.051 25 0.10 0.35 0.85 1.04 1.05 1.03 0.802 51 0.38 0.93 1.10 1.07 1.07 1.07 1.05Recycled Content:20% post consumer5% pre consumerASTM C1071, Type IIASTM G21 and G22ASTM D5116-State of WashingtonSMACNA Application Standards for Duct LinersNAIMA Fibrous Glass Duct Liner InstallationNFPA 90A and 90B, FHC 25/50Conforms to ASHRAE 62California Title 24NYC MEA # 353-93-MCanada: CGSB 51.10CAN/ULC S102-M88ASTM C1071 Air Erosion Test / UL 181ASTM G21 and G22ASTM E84, FHC 25/50NFPA 90A and 90BASTM D5116-State of WashingtonASHRAE 62ULC S102-M88ASTM C553 Type II – Type 75, 100 and 150 Type III – Type 150ASTM C1290ASTM C1139, Type II Grade I – Type 75 Faced Grade II – Type 100 Faced Grade III – Type 150 FacedASMT E84, FHC 25/50 – FSK FacingASTM C1136, Type II – FSK FacingNYC MEA # 40-75-MCanada: CGSB 51-GP-11MCAN/ULC S102-M88ASTM C612, Type 1A and 1B (813, 814, 815, 817)ASTM C553, Type III (812 Only)ASTM C795ASTM C1136 Type I – AP Facing Type II – AP and FSK FacingASTM E84, UL 723, NFPA 255FHC 25/50, NFPA 90A and 90BHH-I-558C, Form B, Type I, Class 7 (812, 813, 814, 815)MIL-I-24244CNRC 1.36Canada: CGSB 51-GP-10MCAN/ULC S102-M88
Linacoustic RCFIBER GLASS DUCT LINER WITHREINFORCED COATINGMicrolite XG 800 Series Spin-Glas FIBER GLASS LINERS FOR ROUND METAL DUCTSFORMALDEHYDE-FREE FIBER GLASSDUCT WRAPFIBER GLASS DUCT ANDEQUIPMENT INSULATIONR-300 is a rigid fiber glass plenum liner boardwith the durable acrylic Permacote surfacetreatment.A group of fiber glass duct liners for roundducts of virtually any size. Products have thedurable acrylic Permacote surface treatment.Fiber glass duct wrap insulation used on theexterior of rectangular and round metal ductsas thermal insulation.Operating Temperature Limit:250 F (121 C) VSD for very small diameters SD for small diameters LD for large diametersOperating Temperature Limit:250 F (121 C)800 Series Spin-Glas can be used in plainor faced form to insulate heating ducts andequipment. 800 Series Spin-Glas is ideal forapplication on commercial and industrialheating, air conditioning, power and processequipment.LinaTex Permacote Linacoustic R-300Spiracoustic Plus SystemTEXTILE FIBER DUCT LINERRIGID FIBER GLASS PLENUM LINER BOARDLinaTex is a flexible duct liner made fromcontinuous glass fibers bonded with athermosetting resin. The airstream surfaceis protected with a black, high-density glassmat. The mat offers exceptional durability inexposure to air velocity in systems operatingat velocities up to 5000 fpm (25.4 m/sec). ThermalAcousticalDESCRIPTIONIcon KeyFlexible duct liner insulation with theairstream surface protected with JM’sexclusive Reinforced Coating System thatcombines state-of-the-art Permacoteacrylic coating with a flexible glass clothreinforcement.Operating Temperature Limit:250 F (121 C)Fire ResistantOperating Temperature Limit:250 F (121 C)Maximum Air Velocity:6000 fpm (30.5 m/sec)Products for improved indoorenvironmental qualityPERFORMANCE CHARACTERISTICSFormaldehyde-free THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in½11½2mm13253851(hr ft2 ºF)/Btu2.24.26.38.0ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)in½11½2mm13253851125 250 500 1000 2000 40000.07 0.20 0.44 0.66 0.84 0.930.08 0.31 0.64 0.84 0.97 1.030.10 0.47 0.85 1.01 1.02 0.990.25 0.66 1.00 1.05 1.02 1.01SPECIF ICAT IONCOMPLIANCERecycled Content:20% post consumer5% pre consumerFor more information, visit us atspecJM.comType in300 ½3001200 ½1501150 1½ASTM C1071, Type I, FlexibleASTM G21 and G22ASTM D5116-State of WashingtonSMACNA Application Standards for Duct LinersNAIMA Fibrous Glass Duct Liner InstallationNFPA 90A and 90B, FHC 25/50ICC CompliantConforms to ASHRAE 62California Title 24Canada: CGSB 51-GP-11MCAN/ULC S102-M88mm1325132538(hr ft2 ºF)/Btu m2 ºC/W2.60.454.20.742.40.423.70.655.50.97THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in11½2Type300300200150150in mm 125 250 500 1000 2000½ 13 0.03 0.14 0.30 0.55 0.721 25 0.08 0.27 0.62 0.86 0.92½ 13 0.06 0.13 0.28 0.52 0.711 25 0.09 0.24 0.50 0.70 0.861½ 38 0.18 0.37 0.68 0.90 1.0240000.840.910.740.870.93mm253851(hr ft2 ºF)/Btu4.36.38.7THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.m2 ºC/W0.761.111.53in11½2*Recycled Content:66%–83% pre consumer(hr ft2 ºF)/Btu4.36.48.4m2 0 500 10000.26 0.69 1.000.52 1.01 1.070.73 1.10 1.1020001.071.031.0440001.020.971.03Recycled Content:20% post consumerNRC0.750.901.00in11½2mm253851125 250 5000.05 0.21 0.710.10 0.39 1.020.17 0.63 1.1010001.011.081.0520001.071.041.04Recycled Content:20% post consumerdependent on material typeASTM C1071, Type I, FlexibleASTM G21 and G22ASTM D5116-State of WashingtonSMACNA Application Standards for Duct LinersNAIMA Fibrous Glass Duct Liner InstallationNFPA 90A and 90B, FHC 25/50Conforms to ASHRAE 62California Title 24Canada: CGSB 51-GP-11MCAN/ULC S102-M88INSTALLEDType in75 1½75275 2.3753100 1½1002150 1½1502ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.450.650.400.600.75mm253851THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.*2 in. is not stocked; special order only.ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.550.700.850.95Unfaced: 450 F (232 C)Faced: unfaced side 450 F (232 C)faced side 150 F (66 C)Maximum Air Velocity:6000 fpm (30.5 m/sec)THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.m2 ºC/W0.390.741.111.41Operating Temperature Limit:Operating Temperature Limit:250 F (121 C)Maximum Air Velocity:5000 fpm (25.4 m/sec)Moisture ControlRecycled ContentMaximum Air Velocity:6000 fpm (30.5 13851(hr ft2 ºF )/Btu m2 0.836.31.11OUT OF PACKAGEType in mm (hr ft2 ºF )/Btu m2 ºC/W75 1½385.20.92752516.91.2275 2.3588.01.417537610.31.81100 1½385.60.991002517.41.30150 1½386.01.061502518.01.41THERMAL CONDUCTIVITY (“k”)(ASTM C 177 AND C 518)Type in812 1½–4813 1½–4814 1–4815 1–2½817 1–2mm Btu in/(hr ft2 F) W/m 3325–640.220.03225–510.220.032ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)Type812812813813814814815815817817in mm 125 250 500 1000 2000 4000 NRC1 25 0.07 0.24 0.63 0.87 1.00 1.02 0.702 51 0.24 0.68 1.10 1.13 1.10 1.07 1.001 25 0.08 0.27 0.69 0.95 1.05 1.02 0.752 51 0.19 0.88 1.15 1.14 1.10 1.07 1.051 25 0.06 0.29 0.75 0.99 1.04 1.02 0.752 51 0.24 1.00 1.11 1.08 1.06 1.05 1.051 25 0.03 0.32 0.80 1.04 1.05 1.05 0.802 51 0.27 0.91 1.11 1.09 1.09 1.09 1.051 25 0.10 0.35 0.85 1.04 1.05 1.03 0.802 51 0.38 0.93 1.10 1.07 1.07 1.07 1.05Recycled Content:20% post consumer5% pre consumerASTM C1071, Type IIASTM G21 and G22ASTM D5116-State of WashingtonSMACNA Application Standards for Duct LinersNAIMA Fibrous Glass Duct Liner InstallationNFPA 90A and 90B, FHC 25/50Conforms to ASHRAE 62California Title 24NYC MEA # 353-93-MCanada: CGSB 51.10CAN/ULC S102-M88ASTM C1071 Air Erosion Test / UL 181ASTM G21 and G22ASTM E84, FHC 25/50NFPA 90A and 90BASTM D5116-State of WashingtonASHRAE 62ULC S102-M88ASTM C553 Type II – Type 75, 100 and 150 Type III – Type 150ASTM C1290ASTM C1139, Type II Grade I – Type 75 Faced Grade II – Type 100 Faced Grade III – Type 150 FacedASMT E84, FHC 25/50 – FSK FacingASTM C1136, Type II – FSK FacingNYC MEA # 40-75-MCanada: CGSB 51-GP-11MCAN/ULC S102-M88ASTM C612, Type 1A and 1B (813, 814, 815, 817)ASTM C553, Type III (812 Only)ASTM C795ASTM C1136 Type I – AP Facing Type II – AP and FSK FacingASTM E84, UL 723, NFPA 255FHC 25/50, NFPA 90A and 90BHH-I-558C, Form B, Type I, Class 7 (812, 813, 814, 815)MIL-I-24244CNRC 1.36Canada: CGSB 51-GP-10MCAN/ULC S102-M88
Air Handling Systems Product GuideFiber Glass InsulationMat-Faced Micro-Aire FIBER GLASS DUCT BOARDFiber glass duct board for fabrication intorectangular ductwork, the airstream side ofthe duct board features a fiber glass mat foruse at velocities up to 5000 fpm (25.4 m/sec.). Type 475 & Type 800Operating Temperature Limit:250 F (121 C)Maximum Air Velocity:5000 fpm (30.5 m/sec)SuperDuct RC SystemEnviroAire COATED, HIGH-PERFORMANCEAIR DUCT BOARDFORMALDEHYDE-FREE FIBER GLASSDUCT BOARDSuperDuct RC Air Duct Board is the primarycomponent of the system, which also consistsof SuperSeal coating products. SuperDuct RCfeatures an airstream surface protected withJM’s exclusive Reinforced Coating Systemthat combines state-of-the-art Permacoteacrylic coating with a flexible glass clothreinforcement.EnviroAire Formaldehyde-free Fiber Glass DuctBoard* is produced from durable glass fibers,bonded with a thermosetting resin. EnviroAireDuct Board is ideal for residential HVACapplications to quietly and efficientlydistribute cool or warm air for greaterroom-to-room comfort.Operating Temperature Limit:250 F (121 C)Maximum Air Velocity:6000 fpm (30.5 m/sec)Maximum Air Velocity:6000 fpm (30.5 m/sec)THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in11½2mm Type254753880051800(hr ft2 ºF)/Btu m2 ºC/W4.30.766.51.158.71.53JMCOM100290in mm 125 250 5001 25 0.07 0.25 0.631½ 38 0.10 0.42 0.912 51 0.17 0.63 06*Limited availability. Contact your local JM sales representativefor further information.THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in11½2ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)Type475800800Operating Temperature Limit:250 F (121 C)mm Type254753880051800(hr ft2 ºF)/Btu m2 ºC/W4.30.766.51.158.71.53ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.700.850.95Type475800800in mm 125 250 5001 25 0.04 0.27 0.711½ 38 0.11 0.45 0.962 51 0.14 0.81 1.1010000.961.071.07Recycled Content:20% post consumerRecycled Content:20% post consumerUL 181, Class 1 Rigid Air Duct ListedASTM G21 and G22Conforms to ASHRAE 62ICC CompliantNFPA 90A and 90BUL 181, Class 1 Rigid Air Duct ListedNFPA 90A and 90BConforms to ASHRAE 62ASTM G21 and G22Canada: CGSB THERMAL PERFORMANCER-VALUE @ 75 F (24 C) MEAN TEMP.in1½mm38(hr ft2 ºF)/Btu6.5m2 ºC/W1.14ASTM C423, TYPE ”A“MOUNTING, FREQUENCY (HZ)NRC0.750.901.00Type in mm 125 250 500 1000 2000 4000 NRC800 1½ 38 0.11 0.45 0.96 1.07 1.06 1.00 0.90The physical and chemical properties of the Air Handling Systems Products listed herein represent typical,average values obtained in accordance with accepted test methods and are subject to normal manufacturingvariations. They are supplied as a technical service and are subject to change without notice. Numericalflame spread and smoke developed ratings are not intended to reflect hazards presented by these or any othermaterials under actual fire conditions. Check with the Regional Sales Office nearest you to ensure currentinformation. All Johns Manville products are sold subject to Johns Manville’s standard Terms and Conditionsincluding Limited Warranty and Limitation of Remedy. For a copy of the Johns Manville standard Terms andConditions, Limited Warranty and Limitation of Remedy, an
ASTM C1071, Type I, Flexible ASTM G21 and G22 ASTM D5116-State of Washington SMACNA Application Standards for Duct Liners NAIMA Fibrous Glass Duct Liner Installation NFPA 90A and 90B, FHC 25/50 Conforms to ASHRAE 62 California Title 24 Canada: CGSB 51-GP-11M CAN/ULC S102-M88 ASTM C1071, Type II ASTM G2
water and most chemical and low-solvency washdowns. Zeston PVC jacketing comes in a variety of mil thicknesses, roll lengths, and specific finished sizes to cover insulated pipe. Zeston PVC jacketing is available in both white and color. The Johns Manville Zeston
Sub-level 2: 07 50 00 - Membrane Roofing Sub-level 3: 07 54 00 - Thermoplastic Membrane Roofing Sub-level 4: 07 54 19 - Polyvinyl-Chloride Roofing COMPANY: Johns Manville 717 17th St. Denver, CO 80202-3330 USA www.jm.com 1. SUBJECT: JM PVC 50 mil, JM PVC 60 mil, JM PVC 80 mil JM PVC Fleece Backed 50 mil, JM PVC Fleece Backed 60 mil,
St. Johns County Comprehensive Emergency Management Plan 2016 CEMP DISTRIBUTION LIST Copy Number Organization Distributed CEMP 1 St. Johns County Division of Emergency Management (Master) 2 St. Johns County Administration 3 St. Johns County Board of County Commissioners 4 St. Johns County Clerk of the Court
Johns Hopkins Nursing is a pub-lication of the Johns Hopkins University School of Nursing and the Johns Hopkins Nurses’ Alumni Association. The magazine tracks Johns Hopkins nurses and tells the story of their endeavors in the areas of education, practice, scholarship, research
Johns Hopkins Bloomberg School of Public Health, Johns Hopkins Center for Drug Safety and Effectiveness, and Johns Hopkins Center for Injury Research and Policy Cite as: Alexander GC, Frattaroli S, Gielen AC, eds. The Prescription Opioid Epidemic: An Evidence-Based Approach. Johns Hopkins Bloomberg School of Public Health, Baltimore, Maryland: 2015
Precision Air 2355 air cart with Precision Disk 500 drill. Precision Air 2355 air cart with row crop tires attached to Nutri-Tiller 955. Precision Air 3555 air cart. Precision Air 4765 air cart. Precision Air 4585 air cart. Precision Air 4955 cart. THE LINEUP OF PRECISION AIR 5 SERIES AIR CARTS INCLUDES: Seven models with tank sizes ranging from
graham graham gray gray marine grove grove guaran guaranteed guy guy hallsc hall-scott . jmanvl johns manville johns johnson kbtool kennedy-bravada tool kd-mf kd-mf kellog m.w.kellog kelsey kelsey hayes . wilcox wilcox willys willys / willys-je
Genes and DNA Methylation associated with Prenatal Protein Undernutrition by Albumen Removal in an avian model . the main source of protein for the developing embryo8, the net effect is prenatal protein undernutrition. Thus, in the chicken only strictly nutritional effects are involved, in contrast to mammalian models where maternal effects (e.g. hormonal effects) are implicated. Indeed, in .
