CY8CKIT-059 PSoC 5LP Prototyping Kit Guide

2y ago
22 Views
2 Downloads
5.44 MB
42 Pages
Last View : 11d ago
Last Download : 2m ago
Upload by : Philip Renner
Transcription

CY8CKIT-059PSoC 5LP Prototyping Kit GuideDoc. #: 001-96498 Rev. *ACypress Semiconductor198 Champion CourtSan Jose, CA 95134-1709Phone (USA): 1.800.858.1810Phone (Intnl): 1.408.943.2600http://www.cypress.com

CopyrightsCopyrights Cypress Semiconductor Corporation, 2015. The information contained herein is subject to change without notice. CypressSemiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypressproduct. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted norintended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an expresswritten agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in lifesupport systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. Theinclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such useand in doing so indemnifies Cypress against all charges.Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected byand subject to worldwide patent protection (United States and foreign), United States copyright laws and international treatyprovisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, createderivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating customsoftware and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit asspecified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of thisSource Code except as specified above is prohibited without the express written permission of Cypress.Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THISMATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESSFOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materialsdescribed herein. Cypress does not assume any liability arising out of the application or use of any product or circuitdescribed herein. Cypress does not authorize its products for use as critical components in life-support systems where amalfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ productin a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifiesCypress against all charges.Use may be limited by and subject to the applicable Cypress software license agreement.PSoC and CapSense are registered trademarks and PSoC Creator are trademarks of Cypress Semiconductor Corp. All othertrademarks or registered trademarks referenced herein are property of the respective corporations.Flash Code ProtectionCypress products meet the specifications contained in their particular Cypress PSoC Data Sheets. Cypress believes that itsfamily of PSoC products is one of the most secure families of its kind on the market today, regardless of how they are used.There may be methods, unknown to Cypress, that can breach the code protection features. Any of these methods, to ourknowledge, would be dishonest and possibly illegal. Neither Cypress nor any other semiconductor manufacturer canguarantee the security of their code. Code protection does not mean that we are guaranteeing the product as ‘unbreakable’.Cypress is willing to work with the customer who is concerned about the integrity of their code. Code protection is constantlyevolving. We at Cypress are committed to continuously improving the code protection features of our products.CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A2

Contents1.11.2Kit Contents .4PSoC Creator .51.2.1 PSoC Creator Code Examples .61.2.2 Kit Code Examples.71.2.3 PSoC Creator Help .71.2.4 Component Datasheets .81.3 Getting Started.81.4 Additional Learning Resources.81.5 Technical Support.91.6 Document Conventions .92.1 Before You Begin.102.2 Install Software .102.3 Uninstall Software.123.1 Theory of Operation.133.2 KitProg .143.3 Programming and Debugging the PSoC 5LP Target Device.143.3.1 Programming using PSoC Creator.143.3.2 Debugging using PSoC Creator.163.3.3 Programming using PSoC Programmer.163.4 USB-UART Bridge .173.5 USB-I2C Bridge .173.6 Updating the KitProg Firmware.174.1 Board Details .184.2 Hardware Details .194.2.1 Target Board.194.2.2 KitProg Board.204.2.3 Power Supply System .214.2.4 Board Separation (Snapping).214.2.5 Header Connections .224.2.6 User and Passive Inputs .255.1 Using the Kit Code Examples .285.2 CE95352 Blinking LED .325.3 CE95277 ADC and UART .345.4 CE95394 USB HID Mouse .35PSoC 5LP Prototyping Kit Schematics .36Programming PSoC 5LP Prototyping Kit Using MiniProg3/KitProg .38Bill of Materials .39CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A1

Safety InformationRegulatory ComplianceThe CY8CKIT-059 PSoC 5LP Prototyping Kit is intended for use as a development platform forhardware or software in a laboratory environment. The board is an open system design, which doesnot include a shielded enclosure. This may cause interference to other electrical or electronicdevices in close proximity. In a domestic environment, this product may cause radio interference. Insuch cases, you may be required to take adequate preventive measures. In addition, this boardshould not be used near any medical equipment or RF devices.Attaching additional wiring to this product or modifying the product operation from the factory defaultmay affect its performance and cause interference with other apparatus in the immediate vicinity. Ifsuch interference is detected, suitable mitigating measures should be taken.The PSoC 5LP Prototyping Kit, as shipped from the factory, has been verified to meet withrequirements of CE as a Class A product.The PSoC 5LP Prototyping Kit contains electrostaticdischarge (ESD) sensitive devices. Electrostatic chargesreadily accumulate on the human body and any equipment,and can discharge without detection. Permanent damagemay occur on devices subjected to high-energy discharges.Proper ESD precautions are recommended to avoidperformance degradation or loss of functionality. Storeunused PSoC 5LP Prototyping Kit boards in the protectiveshipping package.End-of-Life/Product RecyclingThis kit has an end-of life five years from the date ofmanufacture mentioned on the back of the box. Contact yournearest recycler for discarding the kit.CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A2

Safety InformationGeneral Safety InstructionsESD ProtectionESD can damage boards and associated components. Cypress recommends that you performprocedures only at an ESD workstation. If such a workstation is not available, use appropriate ESDprotection by wearing an antistatic wrist strap attached to the chassis ground (any unpainted metalsurface) on your board when handling parts.Handling BoardsPSoC 5LP Prototyping Kit boards are sensitive to ESD. Hold the board only by its edges. Afterremoving the board from its box, place it on a grounded, static-free surface. Use a conductive foampad if available. Do not slide board over any surface.CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A3

1.IntroductionThank you for your interest in the CY8CKIT-059 PSoC 5LP Prototyping Kit. The PSoC 5LPprototyping kit is designed as an easy-to-use and inexpensive prototyping platform. The PSoC 5LPPrototyping Kit supports the PSoC 5LP device family, delivering a complete system solution for awide range of embedded applications at a very low cost. The PSoC 5LP is the industry’s mostintegrated SoC with an ARM Cortex -M3 CPU. It combines programmable and reconfigurablehigh-precision analog and digital blocks with flexible automatic routing. The unique flexibility of thePSoC 5LP architecture will be helpful for those who want to rapidly develop products using the PSoC5LP device family.The PSoC 5LP Prototyping Kit offers an open footprint breakout board to maximize the end-utility ofthe PSoC 5LP device. This kit provides a low-cost alternative to device samples while providing aplatform to easily develop and integrate the PSoC 5LP device into your end-system. In addition, theboard includes the following features: Micro-USB connector to enable USB application development On-board CMOD capacitors to enable CapSense development Bypass capacitors to ensure the high-quality ADC conversions An LED to provide feedback A push button to provide a simple user input Load capacitors to connect 32 kHz external crystal oscillator 3.3V to 5.5V operationThe PSoC 5LP prototyping kit also integrates the Cypress KitProg that enables on-boardprogramming, debugging and bridging functionality, such as USB-UART and USB-I2C. The KitProgis used to program and debug the target PSoC 5LP device (see Figure 1-1). The prototyping kitallows you to separate the KitProg board from the PSoC 5LP target board.1.1Kit ContentsThis kit contains only the PSoC 5LP Prototyping Kit board.Figure 1-1. CY8CKIT-059 PSoC 5LP Prototyping KitCY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A4

Introduction1.2PSoC CreatorPSoC Creator is a state-of-the-art, easy-to-use integrated design environment (IDE). It introducesrevolutionary hardware and software co-design, powered by a library of pre-verified and precharacterized PSoC Components. With PSoC Creator, you can:1. Drag and drop Components to build your hardware system design in the main design workspace2. Codesign your application firmware with the PSoC hardware3. Configure Components using configuration tools4. Explore the library of 100 Components5. Review Component datasheetsFigure 1-2. PSoC Creator FeaturesPSoC Creator also enables you to tap into an entire tool ecosystem with integrated compiler chainsand production programming programmers for PSoC devices.For more information, visit www.cypress.com/psoccreator.CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A5

Introduction1.2.1PSoC Creator Code ExamplesPSoC Creator includes a large number of code examples. These examples are available from thePSoC Creator Start Page, as Figure 1-3 on page 6 shows.Code examples can speed up your design process by starting you off with a complete design,instead of a blank page. The code examples also show how PSoC Creator Components can beused for various applications. Code examples and documentation are included, as shown inFigure 1-4 on page 7.In the Find Example Project dialog shown in Figure 1-4, you have several options: Filter for examples based on architecture or device family, that is, PSoC 3, PSoC 4 or PSoC 5LP;project name; or keyword Select from the menu of examples offered based on the Filter Options Review the example project’s description (on the Documentation tab) Review the code from the Sample Code tab. You can copy the code from this window and pasteto your project, which can help speed up code development Create a new project (and a new workspace if needed) based on the selection. This can speedup your design process by starting you off with a complete, basic design. You can then adapt thatdesign to your application.Figure 1-3. Code Examples in PSoC CreatorCY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A6

IntroductionFigure 1-4. Code Example Projects with Sample Code1.2.2Kit Code ExamplesThis kit includes a number of code examples which can be used to quickly evaluate the functionalityof this kit. These examples are described in the Code Examples.1.2.3PSoC Creator HelpVisit the PSoC Creator home page to download the latest version of PSoC Creator. Then, launchPSoC Creator and navigate to the following items: Quick Start Guide: Choose Help Documentation Quick Start Guide. This guide gives youthe basics for developing PSoC Creator projects. Simple Component example projects: Choose File Open Example projects. Theseexample projects demonstrate how to configure and use PSoC Creator Components. Starter designs: Choose File New Project PSoC 5LP Starter Designs. These starterdesigns demonstrate the unique features of PSoC 5LP. System Reference Guide: Choose Help System Reference System Reference Guide.This guide lists and describes the system functions provided by PSoC Creator. Component datasheets: Right-click a Component and select Open Datasheet, as shown inFigure 1-5 on page 8. Visit the PSoC 5LP Component Datasheets page for a list of all PSoC 5LPComponent datasheets. Document Manager: PSoC Creator provides a document manager to help you to easily find andreview document resources. To open the document manager, choose the menu item Help Document Manager.CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A7

Introduction1.2.4Component DatasheetsRight-click a Component and select Open Datasheet (see Figure 1-5 on page 8).Figure 1-5. Opening Component Datasheet1.3Getting StartedThis guide will help you get acquainted with the PSoC 5LP Prototyping Kit:1.4 The Software Installation chapter on page 10 describes the installation of the kit software. Thisincludes installation of PSoC Creator IDE for development and debugging the applications, andPSoC Programmer for programming hex files. The Kit Operation chapter on page 13 describes the major features of the PSoC 5LP Pioneer Kitand functionalities such as programming, debugging, and the USB-UART and USB-I2C bridges. The Hardware chapter on page 17 details the hardware content of the kit and the hardwareoperation. The Code Examples chapter on page 27 describes multiple PSoC 5LP code examples that willhelp you understand how to create your own PSoC 5LP projects. The Appendix chapter on page 35 provides schematics, details about programming the kit usingMiniprog, and the bill of materials (BOM).Additional Learning ResourcesCypress provides a wealth of information at www.cypress.com to help you to select the right PSoCdevice for your design, and to help you to quickly and effectively integrate the device into yourdesign. For a comprehensive list of resources, see KBA86521, How to Design with PSoC 3, PSoC 4,and PSoC 5LP. The following is an abbreviated list for PSoC 5LP: Overview: PSoC Portfolio, PSoC Roadmap Product Selectors: PSoC 1, PSoC 3, PSoC 4, or PSoC 5LP. In addition, PSoC Creator includes adevice selection tool. Datasheets: Describe and provide electrical specifications for the PSoC 5LP device family CapSense Design Guide: Learn how to design capacitive touch-sensing applications with thePSoC 5LP family of devices. Application Notes and Code Examples: Cover a broad range of topics, from basic to advancedlevel. Many of the application notes include code examples. Visit the PSoC 3/4/5 Code Exampleswebpage for a list of all available PSoC Creator code examples. For accessing code examplesfrom within PSoC Creator - see PSoC Creator Code Examples.CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A8

Introduction1.5 Technical Reference Manuals (TRM): Provide detailed descriptions of the architecture andregisters in each PSoC 5LP device family. Development Kits: CY8CKIT-050 PSoC 5LP Development Kit enables you to evaluate, develop, and prototypehigh-precision analog, low-power, and low-voltage applications designed using the PSoC 5LPdevice family. CY8CKIT-001 is a common development platform for all PSoC family devices. PSoC 5LP Expansion Boards are the expansion modules designed to implement a targetapplication. The MiniProg3 device provides an interface for flash programming and debug. Knowledge Base Articles (KBA): Provide design and application tips from experts on using thedevice. PSoC Creator Training: Visit the link www.cypress.com/go/creatorstart/creatortraining for acomprehensive list of video trainings on PSoC Creator. Learning From Peers: Visit www.cypress.com/forums to meet enthusiastic PSoC developersdiscussing the next generation embedded systems on Cypress Developer Community Forums.Technical SupportIf you have any questions, our technical support team is happy to assist you. You can create asupport request on the Cypress Technical Support page.If you are in the United States, you can talk to our technical support team by calling our toll-freenumber: 1-800-541-4736. Select option 8 at the prompt.You can also use the following support resources if you need quick assistance.1.6 Self-help. Local Sales Office Locations.Document ConventionsTable 1-1. Document Conventions for GuidesConventionUsageCourier NewDisplays file locations, user entered text, and source code:C:\.cd\icc\ItalicsDisplays file names and reference documentation:Read about the sourcefile.hex file in the PSoC Creator User Guide.[Bracketed, Bold]Displays keyboard commands in procedures:[Enter] or [Ctrl] [C]File OpenRepresents menu paths:File Open New ProjectBoldDisplays commands, menu paths, and icon names in procedures:Click the File icon and then click Open.Times New RomanDisplays an equation:2 2 4Text in gray boxesDescribes Cautions or unique functionality of the product.CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A9

2.Software InstallationThis chapter describes the steps to install the software tools and packages on a PC for using thePSoC 5LP Prototyping Kit. This includes the IDE on which the projects will be built and used forprogramming.2.1Before You BeginAll Cypress software installations require administrator privileges, but these are not required to runthe software after it is installed. Close any other Cypress software that is currently running beforeinstalling the kit software.Note: By default, the kit contents are installed in the C:\Program Files\Cypress folder, for a32-bit machine and C:\Program Files (x86)\Cypress, for a 64-bit machine. This directory willcontain the kit example projects. In order to open these examples, it is recommended to use theprocedure as described in the Code Examples chapter. That procedure will create an editable copyof the example in a path that you chose so that the original installed examples will not be modified.2.2Install SoftwareFollow these steps to install the PSoC 5LP Prototyping Kit software:1. Download the PSoC 5LP Prototyping Kit software from http://www.cypress.com/CY8CKIT-059.The kit software is available in three formats for download.a. CY8CKIT-059 Kit Setup: This installation package contains the files related to the kit includingPSoC Creator and PSoC Programmer. However, it does not include the Windows Installer orMicrosoft .NET framework packages. If these packages are not on your computer, the installerdirects you to download and install them from the Internet.b. CY8CKIT-059 Kit Only: This executable file installs only the kit contents, which include kitcode examples, hardware files, and user documents. This package can be used if all thesoftware prerequisites (listed in step 5) are installed on your PC.c. CY8CKIT-059 DVD ISO: This file is a complete package, stored in a DVD-ROM image format,that you can use to create a DVD or extract using an ISO extraction program such as WinZipor WinRAR. The file can also be mounted like a virtual CD/DVD using virtual drive programssuch as Virtual CloneDrive and MagicISO. This file includes all the required software, utilities,drivers, hardware files, and user documents.2. If you have downloaded the ISO file, mount it in a virtual drive. Extract the ISO contents if you donot have a virtual drive to mount. Double-click cyautorun.exe in the root directory of the extractedcontent or mounted ISO if "Autorun from CD/DVD" is not enabled on the PC. The installationwindow will appear automatically. Note: If you are using the "Kit Setup" or "Kit Only" file, then goto step 4 for installation.CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A10

Software Installation3. Click Install CY8CKIT-059 Kit to start the kit installation, as shown in Figure 2-1.Figure 2-1. Kit Installer Screen4. Select the directory in which you want to install the PSoC 5LP Prototyping Kit-related files.Choose the directory and click Next.5. When you click Next, the PSoC 5LP Prototyping Kit installer automatically installs the requiredsoftware, if it is not present on your computer. Following is the required software:a. PSoC Creator 3.1 or later: This software is also available separate from the kit atwww.cypress.com/psoccreator.b. PSoC Programmer 3.22.2 or later: This is installed as part of PSoC Creator installation(www.cypress.com/programmer).6. Choose the Typical/Custom/Complete installation type in the Product Installation Overviewwindow, as shown in Figure 2-2. Click Next after you select the installation type.CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A11

Software InstallationFigure 2-2. Product Installation Overview7. Read the License agreement and select 'I accept the terms in the license agreement' to continuewith installation. Click on Next.8. When the installation begins, a list of packages appears on the installation page. A green checkmark appears next to each package after successful installation.9. Enter your contact information or select the check box Continue Without Contact Information.Click Finish to complete the PSoC 5LP Prototyping Kit installation.10.After the installation is complete, the kit contents are available at the following location: Install Directory \CY8CKIT-059Default location:Windows OS (64-bit):C:\Program Files (x86)\Cypress\CY8CKIT-059Windows OS (32-bit):C:\Program Files\Cypress\CY8CKIT-059Note: For Windows 7/8/8.1 users, the installed files and the folder are read only. To use the installercode examples, follow the steps outlined in the Code Examples chapter.2.3Uninstall SoftwareThe software can be uninstalled using one of the following methods:1. Go to Start All Programs Cypress Cypress Update Manager and select the Uninstallbutton.2. Go to Start Control Panel Programs and Features for Windows 7 or Add/RemovePrograms for Windows XP; select the Uninstall/Change button.CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A12

3.Kit OperationThis chapter introduces you to the different features of the PSoC 5LP Prototyping Kit. This primarilyincludes the programming/debugging functionality, KitProg USB-UART and USB-I2C bridges, andthe method to update the KitProg firmware.3.1Theory of OperationFigure 3-1 shows the block diagram for the PSoC 5LP Prototyping Kit.Figure 3-1. Block Diagram of PSoC 5LP Prototyping KitThe PSoC 5LP Prototyping Kit is simplistic in design and focuses on providing you with completeaccess to develop applications using the PSoC 5LP device family. This kit supports the followingfeatures: KitProg: It is an on-board programmer/debugger, which enables the user to program and debugthe target PSoC 5LP device. It can also act as a USB-UART and UART-I2C bridge.When used as a standalone module, it can be used to program devices of PSoC 3, PSoC 4, orPSoC 5 families through the SWD interface. For more details on the KitProg functionality, refer tothe KitProg User Guide in the kit installation directory: Install Directory \CY8CKIT059\ version \Documentation\KitProg User Guide.pdf. Expansion Headers: The PSoC 5LP Prototyping Kit brings all I/Os of the device to the twoexpansion headers, enabling the user to have maximum access to the capabilities of PSoC 5LPdevice. Micro-USB Connector: The on-board micro-USB connector provides access to the USB block ofPSoC 5LP device. This connector enables the user to develop USB applications. User LED: The on-board LED can be used to display outputs from the PSoC 5LP device. Thisincludes modulating the brightness of the LED to notify different states of the device.CY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A13

Kit Operation Push Button (SW): This kit has a push button, which can be used to provide input to thePSoC 5LP.Note: The switch connects the PSoC 5LP pin to ground when pressed. Therefore, you need toconfigure the PSoC 5LP pin as resistive pull-up for detecting the switch press. Reset Button: This button is used for the following purposes: Reset the PSoC 5LP device: When pressed, it connects the XRES line of the PSoC 5LP toground and resets the PSoC 5LP device. Bootload the KitProg: When pressed while connecting the kit’s PCB USB connector to theUSB port of the PC, this button puts the KitProg into the bootloader mode. For more details onthe KitProg functionality, refer to the KitProg User Guide.Note: When the two boards are separated, the user can mount the SW2 button on the target boardto reset the PSoC 5LP device using a switch.3.2KitProgThe KitProg is a multi-functional system, which includes a programmer, debugger, USB-I2C bridge,and a USB-UART bridge. The Cypress PSoC 5LP device is used to implement KitProg functionality.The KitProg is integrated in most PSoC development kits. For more details on the KitProgfunctionality, refer to the KitProg User Guide in the kit installation directory: Install Directory \CY8CKIT-059\ version \Documentation\KitProg User Guide.pdf.3.3Programming and Debugging the PSoC 5LP Target DeviceThe target PSoC 5LP device can be programmed and debugged using the KitProg. Beforeprogramming the device, ensure that PSoC Creator and PSoC Programmer software are installedon the PC. See Install Software on page 10 for more information.3.3.1Programming using PSoC Creator1. Connect the kit to the computer through the PCB USB connector, J10, as shown in Figure 3-2.The kit will enumerate as a composite device, if you are plugging in the PSoC 5LP Prototyping Kitto your PC for the first time.Figure 3-2. Connecting the PSoC 5LP Prototyping Kit to a ComputerCY8CKIT-059 PSoC 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *A14

Kit Operation2. Open the desired project in PSoC Creator. For this, go to File Open Project/Workspace.This provides the option to browse to and open a previously saved project. If you want to openone of the example projects provided with the kit, follow the instructions in the Code Exampleschapter.3. Select the option Build Build Project or press [Shift] [F6] to build the project as shown inFigure 3-3.Figure 3-3. Build an Example Project4. If there are no errors during build, program the firmware into the kit by choosing Debug Program or press

*A 5 Introduction 1.2 PSoC Creator PSoC Creator is a state-of-the-art, easy-to-use integrated design environment (IDE). It introduces revolutionary hardware and software co-design, powered by a library of pre-verified and pre-characterized PSoC Components. With PSoC Creator, you can: 1. D

Related Documents:

The PSoC 5LP Prototyping Kit offers an open footprint breakout board to maximize the end-utility of the PSoC 5LP device. This kit provides a low-cost alternative to device samples while providing a platform to easily develop and integrate the PSoC 5LP device into your end-system. In addition, the

PSoC 3 and PSoC 5LP GPIO basics and demonstrates techniques for their effective use in a design. It is assumed that you are familiar with PSoC Creator and the PSoC 3 and PSoC 5LP family device architecture. If you are new to PSoC, see the introductions in AN54181, Getting Started

The PSoC 5LP Prototyping Kit, as shipped from the factory, has been verified to meet with requirements of CE as a Class A product. The PSoC 5LP Prototyping Kit contains electrostatic discharge (ESD) sensitive devices. Electrostatic charges readily accumulate on the human body and any equipment, and can discharge without detection.

AN77759 - Getting Started with PSoC 5 PSoC Creator Training 1.3.2 Engineers Looking for More AN54460 - PSoC 3 and PSoC 5 Interrupts AN52705 - PSoC 3 and PSoC 5 - Getting Started with DMA AN52701 - PSoC 3 - How to Enable CAN Bus Communication AN54439 - PSoC 3 and PSoC 5 External Crystal Oscillators AN

PSoC 4: PSoC 4100 PS Datasheet Document Number: 002-22097 Rev. *B Page 3 of 44 PSoC Creator PSoC Creator is a free Windows-based Integrated Design Environment (IDE). It enables concurrent hardware and firmware design of PSoC 3, PSoC 4, and PSoC 5LP based systems. Create designs usin g

Thank you for your interest in the CY8CKIT-147 PSoC 4100PS Prototyping Kit. The PSoC 4100PS prototyping kit is designed as an easy-to-use and inexpensive prototyping platform. The PSoC4100PS Prototyping Kit supports the PSoC 4100PS device family, delivering a complete system solution for a wide range of embedded applications at a very low cost.

CY8CKIT-041-41XX PSoC 4100S CapSense Pioneer Kit, is an easy-to-use and inexpensive development platform. This kit includes connectors for Arduino compatible shields. CY8CKIT-149 PSoC 4100S Plus Prototyping Kit enables you to evaual te and develop with Cypress' fourth-generation, low-power CapSense solution using the PSoC 4100S Plus

PSoC 4: PSoC 4100S Plus Datasheet Document Number: 002-19966 Rev. *H Page 3 of 44 PSoC Creator PSoC Creator is a free Windows-based Integrated Design Environment (IDE). It enables concurrent hardware and firmware design of PSoC 3, PSoC 4, and PSoC 5LP based systems. Create designs using