SV8100 DT310/DT330/DT710/DT730 User Guide - Issue 1 - NEC

2y ago
11 Views
2 Downloads
1.83 MB
71 Pages
Last View : 2m ago
Last Download : 2m ago
Upload by : Callan Shouse
Transcription

NoticeNote that when converting this document from its original format to a.pdf file, some minor font and format changes may occur. Whenviewing and printing this document, we cannot guarantee that yourspecific PC or printer will support all of the fonts or graphics.Therefore, when you view the document, fonts may be substituted andyour individual printer may not have the capability to print thedocument correctly.

INT-2078 (UNIV)ISSUE 1.0DT310/DT330/DT710/DT730USER GUIDENEC Infrontia CorporationJuly, 2008

LIABILITY DISCLAIMERNEC Unified Solutions, Inc. reserves the right to change the specifications,functions, or features, at any time, without notice.NEC Unified Solutions, Inc. has prepared this document for use by itsemployees and customers. The information contained herein is the propertyof Unified Solutions, Inc. and shall not be reproduced without prior writtenapproval from NEC Unified Solutions, Inc. All brand names and productnames on this document are trademarks or registered trademarks of theirrespective companies.Copyright 2008NEC Unified Solutions, Inc.

TABLE OF CONTENTS1.INTRODUCTIONGeneral .Face Layout .Keys And Parts .Icon Display .Menu List .Simple Operation by Menu Key and Cursor Key .1251516162.TERMINAL SETUPTerminal Setup With the Up/Down Key .Terminal Setup With the Feature Key.17183.BASIC OPERATIONLogin (DT700 Series Only) .Logout (DT700 Series Only) .To Start Security Mode (DT730 Only) .To Cancel Security Mode .212122224.FEATURE OPERATIONANSWERING CALLS .PLACING CALLS.MICROPHONE CONTROL .SPEAKERPHONE CALLS.GROUP LISTEN .HOLDING CALLS .TRANSFERRING CALLS .CONFERENCE.i2324272727282829

TABLE OF CONTENTSCALL PARK – SYSTEM .STATION BUSY/NO ANSWER OPTIONS .CO/PBX DIALING OPTIONS.CALL PICKUP .PAGING.BACKGROUND MUSIC .CALL FORWARDING.SELECTABLE DISPLAY MESSAGING.STATION RELOCATION.CODE RESTRICTION, DIAL BLOCK.ACCOUNT CODE ENTRY .AUTOMATIC CALL DISTRIBUTION (ACD) .2930333637393941424243445.DIRECTORY OPERATIONAdd New Data.Find Registered Data.Make a Call From Directory .Delete All Directory Data .Delete Specific Directory Data.54555757586.CALL HISTORY OPERATIONView Call History.Make a Call From Call History .Store Call History Data to Speed Dial.Delete Call History Data .ii60616162

1.1.INTRODUCTIONGeneralThis guide explains how to operate DT Series (DT310/DT710/DT330/DT730) under the following headings.CHAPTER 1 INTRODUCTIONExplains the configuration of this guide andcontains the following information. Face layout of DT Series Keys and Parts of DT Series Icon Display Menu ListCHAPTER 2 TERMINAL SETUPExplains the operating procedures for terminalsettings of the DT Series.CHAPTER 3 BASIC OPERATIONExplains the basic operation of DT Series.1CHAPTER 4 FEATURE OPERATIONExplains operating procedures for variousTelephony Server sferCHAPTER 5 DIRECTORY OPERATIONExplains operating procedures for Directoryfunction.AnswSpeakerDT330/DT730CHAPTER 6 CALL HISTORY OPERATIONExplains operating procedures for Call History.1

1.Face LayoutDT310/DT710 (6-Button with LCD)DT310/DT710 (2-button without akerDT710 Model shown above2

1.DT330/DT730 (12-Button with LCD)Exit1DT330/DT730 (24-Button with eAnswerMicMenuRedialSpeakerHOLDLock button is equipped on DT730 only.Note:3TransferSpeakerLock button is equipped on DT730 only.

1.DT330/DT730 (32-Button with LCD)ExitDT330/DT730 (DESI Less ck button is equipped on DT730 only.4TransferSpeakerLock button is equipped on DT730 only.

1.Keys And Parts(2) Programmable KeysThese keys can be programmed as Flexible Linekey/Programmable Feature Key by Web/PCPro.DT310/DT710(2-Button without LCD)(3) RecallPress key to finish an outside call and hear the dialtone.(1)(4) FeatureUsed to activate any features as terminal setupfunctions.(2)(5) Redial(Last Number Call, Speed Calling-Station/Group)Press key to activate redial feature. Press redialand scroll back through numbers that have YZ0#TransferSpeaker(14) oryMessage(5)(7)(6)(6) ConfPress key to establish a three-way conversation.LED on key lights when key is active.(8)(7) AnswerWhen LED on this key is lit, press key to answer awaiting call.(9)(11)(10)(8) MicPress key to respond hands free. LED on this keylights to show the key is activated.(1) Call Indicator LampLamp at top corner of DT Series Display flasheswhen a call terminates to the terminal. On theSV8100, this lamp flashes fast when a callterminates to the terminal and flashes slowerwhen a message has been left.(9) MessageThis key shows a message is waiting. Press thiskey to access the Voice Mail system (ifprogrammed).5

1.(10) Up/Down( DOWN UP)Used to adjust LCD contrast, speaker/receivervolume, and ringer volume. LCD Contrast:Press ( ) or ( ) key while idle. Speaker/Receiver Volume:Press ( ) or ( ) key during conversation. Ringer Volume:Press ( ) or ( ) key during ringing.(11) DirectoryPress key to activate speed calling - systemfeature.(12) SpeakerControls the built-in speaker which can be used forHands Free dialing/monitoring.LED on key lightswhen key is active.DT310 supports half duplex handsfree. DT330supports half/full duplex handsfree.(13) TransferAllows the station user to transfer established callsto another station, without attendant assistance.(14) HoldPress this key to place an internal or external callon hold.6

1.DT330/DT730(24-button with LCD)(1) Security Button (DT730 only)The user can prevent information leakage fromterminal by simple operation.(1)(2) Call Indicator LampOn the SV8100, this lamp flashes fast when a callterminates to the terminal and flashes slowerwhen a message has been left.(2)(3)(3) LCD (Note 1)LCD (Liquid Crystal Display) provides DT Seriesactivity information plus data, time and SoftkeyOperation.(4)(5)ExitHelp(6)The LCD on DT310/DT710 has 24-character/28-character, 3-line gThe LCD on DT330/DT730 has 28-character,4-line capability. Top line is used exclusively for thestatus icons.(11)(12)Speaker28 APR MON 16)(15)101List728 APR MON 8:45AMSTA101DirICMProg

1.(11) MicPress this key to respond hands free.(12) MenuFrom this key, the user can access to the functionsnot normally used (such as terminal settings,downloads and access to XML applications)easily.(4) ExitThe user can exit from a screen mode by pressingthis key.(5) SoftkeysAny feature shown at the bottom of the LCD isavailable. The appropriate feature key is displayedon the screen according to the call handlingprocess.(13) CursorBy using this Key, DT Series user can accessvarious features with simple operation.(6) HelpThe user can press this key followed by aprogrammable key to check what Line orProgrammable Feature is programmed on the key.- 4-way Scroll UP key- Volume (UP) key- 4-way Scroll LEFT key- Redial key(7) Programmable KeysThese keys can be programmed as Flexible Linekey/Programmable Feature Key by the TelephonyServer Administrator. For the SV8100, theprogrammable keys can be set by Web/PCPro andthe user can also set them.- Enter Key- Shortcut Key- 4-way Scroll RIGHT key- Directory key- 4-way Scroll DOWN key- Volume (DOWN) keyTwo lines of menu items can be displayed at atime. Use "Up" or "Down" key to scroll to the item.(8) RecallPress key to finish an outside call and hear the dialtone.(9) FeatureUsed to activate any features as terminal setupfunctions.(10)AnswerWhen LED on this key is lit, press key to answer awaiting call.8

1.Shortcut Menu includes the following features.FeatureMenu of DT330Description1. Missed Call Access to history of Missed Call.2. Voice Mail Access to history of incoming Voice Mail.(15)Redial(Last Number Call, Speed Calling-Station/Group)Press key to activate redial feature. Press redialand scroll back through numbers that have beendialed.When the desired number is displayed, press the #key to activate dialing.(16)SpeakerControls the built-in speaker which can be used forHands Free dialing/monitoring.LED on key lights when key is active.DT310 supports half duplex handsfree. DT330supports half/full duplex handsfree.Menu of DT730Note:DT310/DT710 (2-Button without LCD) doesnot have the Cursor Key. DT310 (6-Buttonwith LCD) also does not have the Cursor Key.(17)TransferAllows the station user to transfer established callsto another station, without attendant assistance.(18)HoldPress this key to place an internal or external callon hold.(14)EnterDT330/DT730 Series has Shortcut Menu forfrequently-used features. The user can access toShortcut Menu by pressing Enter Key.Note:DT310/DT710 Series does not support theShortcut Menu.Note 1: Not equipped on DTL-2E-1/ITL-2E-1.9

1.DT330/DT730(DESI Less 8-Button with LCD)(1)(2) Call Indicator LampOn the SV8100, this lamp flashes fast when a callterminates to the terminal and flashes slowerwhen a message has been left.(2)(3) LCD (Note 1)LCD (Liquid Crystal Display) provides DT Seriesactivity information plus data, time and SoftkeyOperation.(3)(4)The LCD on DT310/DT710 has 24-character/28-character, 3-line capability.(5)ExitHelp(6)(7)28 APR MON NO7PQRS8TUV9WXYZ0#Transfer(18)ProgThe LCD on DT330 has 28-character, 4-linecapability. Top line is used exclusively for thestatus 1Speaker(16)(19)ICM(10)(11)RedialHOLDDirList28 APR MON 8:45AMSTA101DirICMProg(17)(4) ExitThe user can exit from a screen mode by pressingthis key.(1) Security Button (DT730 only)The user can prevent information leakage fromterminal by simple operation.10

1.(a) Icon(5) SoftkeysAny feature shown at the bottom of the LCD isavailable. The appropriate feature key is displayedon the screen according to the call handlingprocess.Status of the Line key such as Call termination,Call Hold or Busy, and setting on the Feature keyare shown as Icons.User’s Status(6) HelpThe user can press this key followed by aprogrammable key to Check what Line orProgrammable Feature is programmed on the key.(b)FlashingPattern Idle I-HOLDBlinkNote(7) 8LD Display(a)Icon Others Hold(C)(b)(a) Note Incoming Ringing During Conversation (IndividualUse) Call Transfer Conference During Conversation (OtherParty Use) Active Feature (Under a settingof feature key like a “CallForwarding”)ScrollPage Switching Key32 (8 keys x 4 pages) additional programmablekeys are provided. They can be programmed asFlexible Line/Programmable feature key byTelephony Server Administrator. For the SV8100,the programmable keys can be set by Web/PCProand the user can also set them.Note: Others Key is busy (example, ifprogrammed as a virtualextension and the virtualextension is busy).Maximum 11 characters (including icon)Maximum 13 characters (excluding icon)11Steady Lit

1.(b) Feature Key InformationFeature Key Information displays the followings.KeyDescriptionLine Key- Name and NumberinformationFeature Key- Feature Name- Speed Dial NameOne-TouchInformationSpeed Dial Key- Number InformationNote:Maximumdigits to bedisplayedRefer tonote*Refer tonote*1Feature Key 1-82Feature Key 9-163Feature Key 17-244Feature Key 25-32Black background indicatescurrently displayed page.Refer tonote*(8) Programmable KeysThese keys can be programmed as Flexible Linekey/Programmable Feature Key by Web/PCPro.Maximum 11 characters (including icon)Maximum 13 characters (excluding icon)(9) Scroll KeyThis key is used to turn over the page of 8LDdisplay.(c) Page Icon8LD display has four pages (8 ProgrammableFeature keys per page). Page Icon Key indicatescurrently displayed page. The user can switch theFeature Key display from page 1 to 4 by using thePage Switching Key.(10)RecallPress key to finish an outside call and hear the dialtone.(11)FeatureUsed to activate any features as terminal setupfunctions.(12)AnswerWhen LED on this key is lit, press key to answer awaiting call.12

1.(13) MicPress key to respond hands free. LED on this keylights showing it is active.Menu ofDT330(14) MenuFrom this key, the user can access to the functionsnot normally used (such as terminal settings,downloads and access to XML applications)easily.(15) CursorBy using this Key, DT Series user can access tovarious features with simple operation.- 4-way Scroll UP key- Volume (UP) key- 4-way Scroll LEFT key- Redial key- Enter Key- Shortcut Key- 4-way Scroll RIGHT key- Directory keyMenu of DT730- 4-way Scroll DOWN key- Volume (DOWN) keyNote:For DT330 Series, two lines of menu items can bedisplayed at a time. For DT730 Series, three linesof menu items can be displayed at a time. Thefollowing figure shows the menu screen for DT330Series. Use "Up" or "Down" key to scroll to theitem.DT310/DT710 (2-Button without LCD andDT310 [6-Button with LCD]) does not havethe Cursor Key.(16)EnterDT330/DT730 Series has Shortcut Menu forfrequently-used features. The user can access toShortcut Menu by pressing Enter Key.13

1.Note:DT310/DT710 Series does not support theShortcut Menu.Shortcut Menu includes the following features. (Ex.of DT730)FeatureDescription1. Missed Call Access to history of Missed Call.2. Voice Mail Access to history of incoming Voice Mail.3. IMNot Supported.4. PresenceNot Supported.5. BacklightAccess to screen for LCD backlight settings.6.BluetoothNot Supported.(17)SpeakerControls the built-in speaker which can be used forHands Free dialing/monitoring.LED on key lights when key is active.DT310 supports half duplex handsfree. DT330supports half/full duplex handsfree.(18)TransferAllows the station user to transfer established callsto another station, without attendant assistance.(19)HoldPress this key to place an internal or external callon hold.14

1.Icon DisplayFeatureThe LCD of DT730 Series displays Desktop Iconswhich provide notification when events (such as missedcall and voice mail) occur.Note:DT310/DT710 Series does not support theicon display.Icon DisplayMICFeatureIconDND DescriptionInstantMessage(Note)This icon appears when there is amissed call. Once the user haschecked the missed call, this iconwill disappear.This icon provides notification ofincoming Voice Mail. Once the userhas checked the mail, this icon willdisappear.This icon appears when the terminalreceives a new instant message.Once the user has checked themessage, this icon will disappear.Presence(Note)This icon indicates the terminal’spresence status.Missed CallVoice Mail15DescriptionEncryption(Note)This icon appears when using RTPEncryption feature.SecurityThis icon appears when the SecurityKey is pressed and the terminal inSecurity modeBluetoothThis icon appears when anyperipheral equipment is connectedvia Bluetooth. DT330 is supported.CursorThis icon indicates the currentlyavailable direction of the CursorKey.Note:4:26 PM TUE 13 APR 2007IconCurrently unavailable.

1.Menu ListSimple Operation by Menu Key andCursor KeyFrom the Menu List, the user can use variousapplication features such as Directory and Call History.By using Menu Key and Cursor Key, DT Series usercan have access to Call History, Directory and terminalsettings with simple operation.To Display Menu ListPress Menu Key. The Menu List is displayed inLCD. Use Cursor Key to select desired Menu Item.No.Menu ItemAs an example, the following shows the operations howto access to Directory menu.Description1Call HistoryTo view Call History.2DirectoryTo use Directory function.3ToolSettings to set Ring Volume, Off HookRing, Backlight, Headset, andPeripherals.4Call FunctionCurrently Not Used (grayed out).5SettingTo set up the terminal such as ringingvolume control, LCD display setting anddownload of Music on Hold.6PresenceCurrently Not Used (grayed out).#FavoriteBy registering frequently-usedfeatures as favorite, the user canaccess these features with simpleoperation.0TerminalConfigThis item is used for Configurationsetting of DT Series.Operation for Instant Message (IM) iscurrently unavailable.Note 1: Unavailable Menu items are grayed out.Note:16

2. TERMINAL SETUPThis chapter describes operating procedures forterminal settings by the UP/DOWN key and Featurekeys.SPEAKERVarious terminal settings such as display, sounds,password, and language are also available from Menukey. For detailed information on terminal settings fromMenu key, see IP Peripheral Equipment Guide.To Adjust Ringer TonePress the Up/Down key during ringing.Terminal Setup With the Up/DownKeyRINGTo Adjust LCD ContrastPress the Up/Down key in the on-hook status.To Adjust Handset Receiver VolumePress the Up/Down key in the off-hook status or duringthe call.LCDHANDSETTo Adjust Speaker VolumePress the Up/Down key during speakerphoneoperation or during the call.17

Terminal Setup With the FeatureKeyTo listen to the Incoming ring choices:Microphone On/OffSTEP 2: Dial 1 to listen to Intercom ring; Dial 2 to listento Trunk ring.STEP 1: Press Speaker and Dial 711.LED on Mic key shows the status of the built-inmicrophone.STEP 3: For Intercom Ring:Dial the code for the ring pattern you want tohear (1-8).STEP 1: Press Feature and 1.To Select Ringer ToneDT Series has 8 kinds of ringer tones that you canselect.TONE No.Tone Range1HighTo Change your Extension Incoming Ring Tone2Mid RangeSTEP 1: Press Speaker and dial 720.3Low4Ring Tone 15Ring Tone 26Ring Tone 37Ring Tone 48Ring Tone 5STEP 2: Dial 1 to set Intercom ring; Dial 2 to set Trunkring.SET INCOM RING1: INT2: EXTSTEP 3: Dial code for the desired ring pattern (1 8).Display below shows when INT is selected.SET INT INCOM RINGINCOM RING 1-8:?STEP 4: Press Speaker to hang up.18

-ORFor Trunk Ring:Dial code for the ring pattern you want to hear(Ring1-3, Melody 4-8). If you select Ring 1-3, a secondscreen prompts for the tone pattern (1-4).TONE No.Tone Range1Ring Tone 12Ring Tone 23Ring Tone 34Melody 45Melody 56Melody 67Melody 78Melody 8STEP 4: Press Speaker to hang up.19

This page is for your notes.20

3. BASIC OPERATIONLogin (DT700 Series Only)Logout (DT700 Series Only)When login mode is activated, the following procedureis required.Press the preassigned Logout Feature Key on theterminal.Enter login code and press Set Softkey.(The station number is used as the Login code.)Note:Note:Login ID :Password :CancelBK2000SetOK28 APR MON 8:45AMEnter the password and press OK Softkey.Login ID :101ListBKSet*****OKICMSTA 101Prog“LOGOUT?” is displayed on the LCD of theterminal.If the login code is accepted, display changes tonormal idle status.LOGOUT ?28 APR MON 8:45AM101STA 101L-OUT28 APR MON 8:45AM101ListDir2000Password :CancelThis location is an example.Logout button is assigned by data setting atthe ECP (Enterprise CommunicationPlatform).DirICMSTA 101ProgPress the Logout Feature Key on the terminalagain.21

To Start Security Mode (DT730 Only)To Cancel Security ModeDisplay the Password Entry screen by either of thefollowing operations.Press the Lock Key on the DT730. The followingmessage is displayed on the LCD. CancelOKPress the OK Softkey to start Security Mode.Press any key while the screen server isactivated.Press the Lock Key while the Lock icon isdisplayed on the LCD.[Password]PasswdDELCancelOKThe Lock Key LED is extinguished and SecurityMode is canceled.22

4. FEATURE OPERATIONANSWERING CALLSAnswering Outside Calls Using the Answer KeyRinging Calls1. Receive outside call.1. Lift the handset.2. Press the Answer key.2. Start conversation.3. Talk with the incoming calling party.When assigning the Delayed Ringing feature,incoming calls will first ring at a primarystation. If the call is unanswered after apreprogrammed time interval, calls will alsoring at the assigned secondary station.Ringing Calls to a Second Incoming Extension/CAR/VE Key4. When additional outside calls are received, pressthe Answer key to place the current call on holdand connect the multiline terminal user to the nextcall.Note:Line 001ElapsedRingingListDir timeICM1. Lift the handset.2. Start conversation.Line 00100:10AnsweredConf Rpt SaveNote 1: A Second Incoming Extension key must beassigned to appear and ring.Note 2: A Line key must be available to answer anincoming outside call2-11 MON 10:15AMTALKING TOSTA 12345Conf23Prog

Voice Announce CallsNote 3: The second call may be placed on Hold.Note 4: Press the flashing Line key or Conf key to1. Adjust the Speaker volume as needed.return to the first call.Note 1: On SV8100 if MIC key is not lit thePLACING CALLSuser cannot answer voice announcecalls without lifting the handset.Internal Calls2. Respond hands free.1. Lift the handset.Note 2: The handset may be used any time2. Dial a station number or 0 (for attendant).during the conversation.3. Voice announce after the tone burst, or wait for theringing call to be answered.Camp-on (Call Waiting)Receive the camp-on tone while on another call:Outside Calls1. When a Camp On is set from another station,complete the present call and a Call Back will ringthe station that set the Camp On.1. Lift the handset.2. Dial the trunk access code (i.e. 9).2. When the Camp On station answers and rings thephone, lift the handset or press the Speaker key.-OR-Off Hook SignalingPress an idle Programmable Outside Line key.With a call in progress:3. Dial the telephone number.1. Receive Off-Hook signaling.4. Converse.2. Press the Answer key, then converse with thesecond party.Line 0012-11 MON 10:56AMTALKING TOSTA 12345ConfConf24Rpt00:152142622000SaveTrf

Trunk QueuingLIST MENUAfter pressing a busy Line key and receiving the trunkbusy indication:Redial CID1. Dial # or press Trunk Queuing/Camp On key(Service Code 751:35).Speed Dial – System/Group/StationTo dial a Station Speed Dial number:2. Replace the handset.1. Press the Speaker key.Note:When a line is available, your telephone willring; lift the handset and place the call.2. Dial #7 (default Service Code).To preselect, press a Line key in step 1(instead of Speaker).Last CO/PBX Number RedialNote:1. Without lifting the handset,press the Redial key.3. Dial the Station Speed Dial buffer number (0 9):1 Station Speed Dial buffer 12 Station Speed Dial buffer 2::0 Station Speed Dial buffer 10Note 1: The stored number dials out.2. To redial the last number, press #.-ORSearch for the desired number from the Redial List bypressing the List Softkey and then the RedialSoftkey.Note 2: Unless you preselect, Trunk Group Routingselects the trunk for the call. The system mayoptionally select a specific Trunk Group forthe call.Note 3: If you have a DSS Console, you may be able topress a DSS Console key to chain to a storednumber.3. Press the Up Arrow/Down Arrow or VOLUME UP/VOLUME DOWN keys to search for the desirednumber.4. Lift the handset or press Speaker to place the call.25

To dial a Station Speed Dialing number:Note 3: If you have a DSS Console, you may be able topress a DSS Console key to chain to a storednumber.1. Press the Speaker key.2. Dial #2 (default Service Code).To dial a Group Speed Dialing number:-OR-1. Press the Speaker key.Press the Redial key.2. Dial #4 (default Service Code).-OR--OR-Press the System Speed Dialing key (ServiceCode 751:27).Press the Redial key.-ORNote:To preselect, press a Line key in step 1(instead of pressing Speaker).Press the Group Speed Dialing key (Service Code751:28).3. Dial the Station Speed Dial buffer number (Default:000 999).Note:The stored number dials out.To preselect, press a Line key in step 1(instead of pressing Speaker).3. Dial the Group Speed Dial buffer number ( none atdefault).2-13 WED 5:28PM92142622000NECConfRptSaveTrfNote 1: Initially, there are no Group Speed Dialbuffers assigned.Note 2: Unless you preselect, Trunk Group Routingselects the trunk for the call. The system mayoptionally select a specific Trunk Group forthe call.Note 3: If you have a DSS Console, you may be able topress a DSS Console key to chain to a storednumber.Note 1: Initially (at default), there are 1000 SystemSpeed Dial buffers.Note 2: Unless you preselect, Trunk Group Routingselects the trunk for the call. The system mayoptionally select a specific Trunk Group forthe call.26

MICROPHONE CONTROLNote 2: You can talk to the caller through the handset.Your coworkers hear your caller’s voice overyour telephone’s speaker.Note 3: When you press the Speaker key once, youturn your Speakerphone on. The second pressturns on Group Listen. Pressing the Speakerkey a third time cancels the Group Listenfeature.1. Press the MIC key.2. A lit MIC LED indicates that the MIC is on.SPEAKERPHONE CALLS1. Press the Speaker key and the Speaker LED lights.2-13 WEDGROUP LISTENConf2. Ensure that the MIC LED is lit.3. Place an internal or outside call.4. Converse.5. Press the Speaker key to disconnect the call.Note:The handset may be used at any time duringthe conversation. To resume handsfreeoperation or to monitor a call, press theSpeaker key (the Speaker LED lights) andreplace the handset.GROUP LISTENTo initiate Group Listen:1. Place or answer a call using the handset.2. Press the Speaker key twice (do not hang up).Note 1: The Speaker LED flashes.275:40PM

HOLDING CALLS3. Announce the call (optional).System Hold –4. Replace the handset.With a call in progress:Using Direct Station Selection (DSS) –1. Press Hold.With a call in progress:Exclusive Hold –1. Press the Transfer key.With a call in progress:2. Press the programmed DSS.1. Press the Exclusive Hold key (Service Code751:45).3. Announce the call (optional).Note 1: To retrieve a held call, press the flashing Line4. Replace the handset.key or ICM key (Internal calls).Note 2: Calls on System Hold can be retrieved fromany multiline terminal with the held lineappearance.Note 3: After a preprogrammed time, the held call willrecall to the originating station.Note 1: If the called station is busy, replace thehandset to initiate a camp-on. Unansweredcamp-on calls and unscreened transfers willrecall to the transferring station.Note 2: To return to the original party, press theflashing Line key or Conf key.Note 3: A Programmable Function Key may beassigned for DSS.Note 4: To transfer a call directly to a personal voicemailbox, dial 8 after dialing the stationnumber.2-13 WED 5:40PMHOLDSTA 12345678InPg ExPg P/UÈTRANSFERRING CALLSUsing Manual Dial –2-13 WED 5:40PMHOLDSTA 12345678InPg ExPg P/UÈWith a call in progress:1. Press the Transfer key.2. Dial the station number.28

CONFERENCECALL PARK – SYSTEM1. Establish an intercom or trunk call.To Park a call in a system orbit:Note: You can Park intercom or trunk calls.2. Press the Conf Softkey or the Conference

DT330/DT730 Series has Shortcut Menu for frequently-used features. The user can access to Shortcut Menu by pressing Enter Key. Note: DT310/DT710 Series does not support the Shortcut Menu. Shortcut Menu includes the following features. (15)Redial (Last Number Call, Speed Calling-Station/

Related Documents:

MANUAL DO USUÁRIO Abril de 2009 . EXCLUSÃO DE RESPONSABILIDADE A NEC se reserva o direito de alterar as especificações, funções ou facilidades, a qualquer momento, sem aviso prévio. . ITL-12D-1 (Série DT730) DTL-12D-1 (Série DT330) 5 ITL-12PA-1 (Série DT730) DTL-12PA-1

NEC Corporation of America reserves the right to change the specifications, functions, or features at any time without notice. NEC Corporation of America has prepared this document for use by its employees and customers. The information contained here

A NEC se reserva o direito de alterar as especificações, funções ou facilidades, a qualquer momento, sem aviso prévio. A NEC elaborou este documento para utilização pelos seus funcionários e clientes. As informações contidas neste documento são propriedade da NEC e não devem ser reproduzidas se

NEC's innovative terminal design is intended to deliver maximum deployment flexibility. Modularity allows for multiple combinations to fit any business niche . DT700 Series Desktop IP Terminals DT300 Series Desktop Digital Terminals DT750 DT730 DT710 DT330 DT310 Color touch scree

For complete details on using SIP trunks with the SV8100, refer to the SV8100 Networking Manual. For complete details on using DID features, refer to the DID feature in the SV8100 Features and Specifications Manual. For details about related hardware, refer to the SV8100 System Hardware Manual.

1.3 SV8100 System Software The SV8100 requires system software 4.00 or higher to use Optimum Business’ service. 1.4 Requirements With the SV8100, a VoIP gateway daughter board is required in addition to licensing for IP (SIP) trunks. A minimum of four IP (SIP) trunks are required due to the NEC Communications Server infrastructure setup.

NEC Corporation of America reserves the right to change the specifications, functions, or features at any time without notice. NEC Corporation of America has prepared this document for use by its employees and customers. The information contained here

accounting requirements for preparation of consolidated financial statements. IFRS 10 deals with the principles that should be applied to a business combination (including the elimination of intragroup transactions, consolidation procedures, etc.) from the date of acquisition until date of loss of control. OBJECTIVES/OUTCOMES After you have studied this learning unit, you should be able to .