Tee Rosettes (General-Use) - Strain Gauge Canada From .
PATTERNS050TG . 66062LT . 67062TJ . 68062TT. 69062TZ. 70062UT. 71Tee Rosettes(General-Use)062WT. 72120WT. 73125LT . 74125TG . 75125TM. 76125UT. 77125WT. 78250TM. 79250UT. 80FEATURES Gage patterns designed for measuring orthogonal strainsAll patterns have two grids oriented at 0 and 90 anglesBoth stacked and planar constructions availableGage lengths from 0.050” (1.27 mm) to 0.250” (6.35 mm)For technical questions, contactmm@vpgsensors.comOther Tee Rosettes . 81www.micro-measurements.com65
050TGGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN ESee Note 1, 3See Note 2See Note 3350 0.2%350 0.4%350 0.2%350 A-XX-050TG-350L, LEactual sizeDESCRIPTIONMiniature high-resistance 90 tee rosette. Sectionshave a common solder tab.LegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.050 ES1.27 ESOverall Length0.250 CP6.35 CPGrid Width0.070 ES1.78 ESCP Complete PatternM MatrixOverall Width0.070 CP1.78 CPMatrix Length0.348.6inchmillimeterMatrix Width0.174.3GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesDescriptionStrain RangeTemperature RangeEAWAEPSAConstantan foil in combination with a tough, flexible, polyimide backing.Fully encapsulated constantan gages with high-endurance leadwires.Annealed constantan foil with tough, high-elongation polyimide backing.Fully encapsulated constantan gages with solder dots. 3% 2% 10% 2%–100 to 350 F (–75 to 175 C)–100 to 400 F (–75 to 205 )–100 to 400 F (–75 to 205 C)–100 to 400 F (–75 to 205 C)Note 1: Insert desired S-T-C number in spaces marked XX.Note 2: Tolerance is increased when Option W, E, SE, LE, or P is specified.Note 3: Products with designations and options shown in bold are not RoHS compliant.www.micro-measurements.com66For technical questions, contactmm@vpgsensors.comDocument No.: 11076Revision: 22-Sep-2015
062LTGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN ESee Note 1120 0.6%350 0.6%120 0.6%350 20C2A-XX-062LT-350DESCRIPTIONGeneral-purpose 90 rosette.actual sizeLegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.0621.52Overall Length0.1644.17Grid Width0.0701.78CP Complete PatternM MatrixOverall Width0.1704.32Matrix Length0.2105.33inchmillimeterMatrix Width0.2305.84GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesL2AC2ADescriptionEncapsulated constantan gages with preattached ribbon leads.Encapsulated constantan gages with preattached ready-to-use cables.Example of anL2A ConstructionStrain RangeTemperature Range 3% 3%–100 to 250 F (–75 to 120 C)–60 to 180 F (–50 to 80 C)Example of anC2A ConstructionNote 1: Insert desired S-T-C number in spaces marked XX.Document No.: 11096Revision: 23-Sep-2015For technical questions, 67
062TJGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN DATAGAGEDESIGNATIONRESISTANCE(OHMS)See Note 1, 2OPTIONSAVAILABLESee Note 2120 0.2%350 0.2%120 0.4%350 A-XX-062TJ-350actual sizeDESCRIPTIONGeneral-purpose 90 tee rosette. Sections have acommon solder tab.LegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.062 ES1.57 ESOverall Length0.295 CP7.49 CPGrid Width0.080 ES2.03 ESCP Complete PatternM MatrixOverall Width0.080 CP2.03 CPMatrix Length0.3812.2inchmillimeterMatrix Width0.194.8GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesDescriptionStrain RangeTemperature RangeEASAConstantan foil in combination with a tough, flexible, polyimide backing.Fully encapsulated constantan gages with solder dots. 3% 2%–100 to 350 F (–75 to 175 C)–100 to 400 F (–75 to 205 C)Note 1: Insert desired S-T-C number in spaces marked XX.Note 2: Tolerance is increased when Option W, E, SE, LE, or P is specified.www.micro-measurements.com68For technical questions, contactmm@vpgsensors.comDocument No.: 11099Revision: 26-Oct-2015
062TTGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN ESee Note 1, 3See Note 2See Note 3120 0.2%350 0.2%350 0.2%120 0.4%350 0.4%350 0.4%120 0.2%350 0.2%120 0.4%350 0.4%350 -350SK-XX-062TT-350W, E, L. LEW, E, L. LEW, SEW*W*W*actual sizeDESCRIPTIONGeneral-purpose 90 tee rosette. Sections areelectrically independent. EK-Series gages are suppliedwith duplex copper pads (DP) when optional feature Wor SE is not specified.LegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.062 ES1.57 ESOverall Length0.133 CP3.38 CPGrid Width0.075 ES1.91 ESCP Complete PatternM MatrixOverall Width0.168 CP4.27 CPMatrix Length0.287.1inchmillimeterMatrix Width0.266.6GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesDescriptionStrain RangeTemperature RangeEAEKWAWKEPSASKConstantan foil in combination with a tough, flexible, polyimide backing.K-alloy foil in combination with a tough, flexible polyimide backing.Fully encapsulated constantan gages with high-endurance leadwires.Fully encapsulated K-alloy gages with high-endurance leadwires.Annealed constantan foil with tough, high-elongation polyimide backing.Fully encapsulated constantan gages with solder dots.Fully encapsulated K-alloy gages with solder dots. 3% 1.5% 2% 1.5% 10% 2% 1.5%–100 to 350 F (–75 to 175 C)–320 to 350 F (–195 to 175 C)–100 to 400 F (–75 to 205 )–452 to 550 F (–269 to 290 C)–100 to 400 F (–75 to 205 C)–100 to 400 F (–75 to 205 C)–452 to 450 F (–269 to 230 C)Note 1: Insert desired S-T-C number in spaces marked XX.Note 2: Tolerance is increased when Option W, E, SE, LE, or P is specified.Note 3: Products with designations and options shown in bold are not RoHS compliant.*Options available but not normally recommended. See Optional Features datasheet for details.Document No.: 11100Revision: 26-Oct-2015For technical questions, 69
062TZGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN ESee Note 1, 3See Note 2See Note 3350 0.2%350 0.4%120 0.4%350 0.4%120 A-XX-062TZ-350SK-XX-062TZ-120W, E, L, LEactual sizeDESCRIPTIONGeneral-purpose 90 tee rosette. Similar in geometryto 062TT pattern except common tab version.LegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.062 ES1.57 ESOverall Length0.133 CP3.38 CPGrid Width0.075 ES1.91 ESCP Complete PatternM MatrixOverall Width0.168 CP4.27 CPMatrix Length0.287.1inchmillimeterMatrix Width0.266.6GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesDescriptionStrain RangeTemperature RangeEAWAWKSASKConstantan foil in combination with a tough, flexible, polyimide backing.Fully encapsulated constantan gages with high-endurance leadwires.Fully encapsulated K-alloy gages with high-endurance leadwires.Fully encapsulated constantan gages with solder dots.Fully encapsulated K-alloy gages with solder dots. 3% 2% 1.5% 2% 1.5%–100 to 350 F (–75 to 175 C)–100 to 400 F (–75 to 205 )–452 to 550 F (–269 to 290 C)–100 to 400 F (–75 to 205 C)–452 to 450 F (–269 to 230 C)Note 1: Insert desired S-T-C number in spaces marked XX.Note 2: Tolerance is increased when Option W, E, SE, LE, or P is specified.Note 3: Products with designations and options shown in bold are not RoHS compliant.www.micro-measurements.com70For technical questions, contactmm@vpgsensors.comDocument No.: 11123Revision: 03-Nov-2015
062UTGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN DATAGAGEDESIGNATIONRESISTANCE(OHMS)See Note 1OPTIONSAVAILABLESee Note 2120 0.4%350 NSmall general-purpose two-element 90 tee rosette.Exposed solder tab area 0.07 x 0.04 in (1.8 x 1.0 mm).actual sizeLegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.062 ES1.57 ESOverall Length0.205 CP5.21 CPGrid Width0.080 ES2.03 ESCP Complete PatternM MatrixOverall Width0.225 CP5.72 CPMatrix Length0.317.9inchmillimeterMatrix Width0.317.9GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesCEADescriptionStrain RangeTemperature Range 3%–100 to 350 F (–75 to 175 C)Universal general-purpose strain gages.Note 1: Insert desired S-T-C number in spaces marked XX.Note 2: Products with designations and options shown in bold are not RoHS compliant.Document No.: 11125Revision: 25-Aug-2015For technical questions, 71
062WTGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN ESee Note 1120 0.5%350 ual sizeLegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.062 ES1.57 ESSmall two-element 90 stackedrosette. Exposed solder tab area 0.07x 0.04 in (1.8 x 1.0 mm). Maximumoperatingtemperature 150 F( 65 C).Overall Length0.235 CP5.97 CPGrid Width0.120 ES3.05 ESCP Complete PatternM MatrixOverall Width0.235 CP5.97 CPMatrix Length0.338.3inchmillimeterMatrix Width0.338.3GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesCEADescriptionUniversal general-purpose strain gages.Strain Range 3%Temperature Range–100 to 150 F (–75 to 65 C)Note 1: Insert desired S-T-C number in spaces marked XX.www.micro-measurements.com72For technical questions, contactmm@vpgsensors.comDocument No.: 11190Revision: 25-Aug-2015
120WTGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN DATAGAGEDESIGNATIONRESISTANCE(OHMS)See Note 1, 2OPTIONSAVAILABLESee Note 2120 0.5%350 0.5%350 0.5%120 0.5%350 0.5%120 0.5%350 0.5%120 0.5%350 0.5%350 -350DESCRIPTIONTwo-element 90 tee stacked rosette. See also 125WTpattern.actual sizeLegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.120 ES3.05 ESOverall Length0.34 M8.6 MGrid Width0.080 ES2.03 ESCP Complete PatternM MatrixOverall Width0.040 M10.2 MMatrix Length0.348.6inchmillimeterMatrix Width0.4010.2GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesWAWDWKSASKSDDescriptionStrain RangeTemperature Range 2% 1.5% 1.5% 2% 1.5% 1.5%–100 to 400 F (–75 to 205 )–320 to 500 F (–195 to 260 C)–452 to 550 F (–269 to 290 C)–100 to 400 F (–75 to 205 C)–452 to 450 F (–269 to 230 C)–320 to 400 F (–195 to 205 C)Fully encapsulated constantan gages with high-endurance leadwires.Fully encapsulated isoelastic gages with high-endurance leadwires.Fully encapsulated K-alloy gages with high-endurance leadwires.Fully encapsulated constantan gages with solder dots.Fully encapsulated K-alloy gages with solder dots.Equivalent to WD Series, but with solder dots instead of leadwires.Note 1: Insert desired S-T-C number in spaces marked XX.Note 2: Products with designations and options shown in bold are not RoHS compliant.Document No.: 11192Revision: 03-Nov-2015For technical questions, 73
125LTGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN ESee Note 1120 0.6%350 0.6%120 0.6%350 20C2A-XX-125LT-350DESCRIPTIONGeneral-purpose 90 rosette.actual sizeLegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.125 ES3.18 ESOverall Length0.243 CP6.17 CPGrid Width0.150 ES3.81 ESCP Complete PatternM MatrixOverall Width0.340 CP8.64 CPMatrix Length0.2907.37inchmillimeterMatrix Width0.40010.16GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesL2AC2ADescriptionEncapsulated constantan gages with preattached ribbon leads.Encapsulated constantan gages with preattached ready-to-use cables.Example of anL2A ConstructionStrain RangeTemperature Range 3% 3%–100 to 250 F (–75 to 120 C)–60 to 180 F (–50 to 80 C)Example of anC2A ConstructionNote 1: Insert desired S-T-C number in spaces marked XX.www.micro-measurements.com74For technical questions, contactmm@vpgsensors.comDocument No.: 11199Revision: 03-Nov-2015
125TGGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN ESee Note 1, 3See Note 2See Note 3350 0.2%1000 0.2%350 0.4%350 0.4%1000 A-XX-125TG-350SK-XX-125TG-10CL, LESEactual sizeDESCRIPTIONGeneral-purpose two-element 90 tee rosette withhigh-resistance grid. Sections have a commonelectrical connection. EK-Series gages are suppliedwith duplex copper dots (DD) when optional featureSE is not specified.LegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.125 ES3.18 ESOverall Length0.500 CP12.70 CPGrid Width0.150 ES3.81 ESCP Complete PatternM MatrixOverall Width0.150 CP3.81 CPMatrix Length0.6115.5inchmillimeterMatrix Width0.235.8GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesDescriptionStrain RangeTemperature RangeEAEKWASASKConstantan foil in combination with a tough, flexible, polyimide backing.K-alloy foil in combination with a tough, flexible polyimide backing.Fully encapsulated constantan gages with high-endurance leadwires.Fully encapsulated constantan gages with solder dots.Fully encapsulated K-alloy gages with solder dots. 5% 1.5% 2% 2% 1.5%–100 to 350 F (–75 to 175 C)–320 to 350 F (–195 to 175 C)–100 to 400 F (–75 to 205 )–100 to 400 F (–75 to 205 C)–452 to 450 F (–269 to 230 C)Note 1: Insert desired S-T-C number in spaces marked XX.Note 2: Tolerance is increased when Option W, E, SE, LE, or P is specified.Note 3: Products with designations and options shown in bold are not RoHS compliant.Document No.: 11209Revision: 09-Jul-2015For technical questions, 75
125TMGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN ESee Note 1, 3See Note 2See Note 3120 0.2%120 0.4%350 0.4%120 0.2%120 0.4%350 P-08-125TM-120SA-XX-125TM-120SK-XX-125TM-350W, E, L, LEW*W*DESCRIPTIONGeneral-purpose two-element 90 tee rosette.Sections are electrically independent. See also 125TQand 125UT patterns.actual sizeLegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.125 ES3.18 ESOverall Length0.215 CP5.46 CPGrid Width0.150 ES3.81 ESCP Complete PatternM MatrixOverall Width0.335 CP8.51 CPMatrix Length0.369.1inchmillimeterMatrix Width0.4310.9GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesDescriptionStrain RangeTemperature RangeEAWAWKEPSASKConstantan foil in combination with a tough, flexible, polyimide backing.Fully encapsulated constantan gages with high-endurance leadwires.Fully encapsulated K-alloy gages with high-endurance leadwires.Annealed constantan foil with tough, high-elongation polyimide backing.Fully encapsulated constantan gages with solder dots.Fully encapsulated K-alloy gages with solder dots. 5% 2% 1.5% 20% 2% 1.5%–100 to 350 F (–75 to 175 C)–100 to 400 F (–75 to 205 )–452 to 550 F (–269 to 290 C)–100 to 400 F (–75 to 205 C)–100 to 400 F (–75 to 205 C)–452 to 450 F (–269 to 230 C)Note 1: Insert desired S-T-C number in spaces marked XX.Note 2: Tolerance is increased when Option W, E, SE, LE, or P is specified.Note 3: Products with designations and options shown in bold are not RoHS compliant.*Options available but not normally recommended. See Optional Features datasheet for details.www.micro-measurements.com76For technical questions, contactmm@vpgsensors.comDocument No.: 11331Revision: 03-Nov-2015
125UTGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN DATAGAGEDESIGNATIONRESISTANCE(OHMS)See Note 1OPTIONSAVAILABLESee Note 1120 0.4%350 NTwo-element 90 tee rosette for general-purpose use.Exposed solder tab area 0.10 x 0.07 in (2.5 x 1.8 mm).actual sizeLegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.125 ES3.18 ESOverall Length0.325 CP8.26 CPGrid Width0.165 ES4.19 ESCP Complete PatternM MatrixOverall Width0.365 CP9.27 CPMatrix Length0.4210.7inchmillimeterMatrix Width0.4511.4GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesCEADescriptionStrain RangeTemperature Range 5%–100 to 350 F (–75 to 175 C)Universal general-purpose strain gages.Note 1: Insert desired S-T-C number in spaces marked XX.Note 2: Products with designations and options shown in bold are not RoHS compliant.Document No.: 11230Revision: 25-Aug-2015For technical questions, 77
125WTGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN ESee Note 1120 0.5%350 ual sizeLegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.125 ES3.18 ESTwo-element 90 tee stacked rosette.Exposed solder tab area 0.10 x 0.07in [2.5 x 1.8 mm]. Maximum operatingtemperature 150 F [ 65 C].Overall Length0.325 CP8.2 CPGrid Width0.180 ES4.57 ESCP Complete PatternM MatrixOverall Width0.325 CP8.26 CPMatrix Length0.4210.7inchmillimeterMatrix Width0.4210.7GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesCEADescriptionUniversal general-purpose strain gages.Strain Range 3%Temperature Range–100 to 150 F (–75 to 65 C)Note 1: Insert desired S-T-C number in spaces marked XX.www.micro-measurements.com78For technical questions, contactmm@vpgsensors.comDocument No.: 11243Revision: 03-Nov-2015
250TMGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN ESee Note 1, 3See Note 2See Note 3120 0.2%120 0.4%350 0.4%120 0.2%120 0.4%350 P-08-125TM-120SA-XX-125TM-120SK-XX-125TM-350W, E, L, LEW*W*DESCRIPTIONGeneral-purpose two-element 90 tee rosette.Sections are electrically independent. See also 250UTpattern.actual sizeLegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.250 ES6.35 ESOverall Length0.430 CP10.92 CPGrid Width0.300 ES7.62 ESCP Complete PatternM MatrixOverall Width0.670 CP17.02 CPMatrix Length0.5313.5inchmillimeterMatrix Width0.7519.1GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesDescriptionStrain RangeTemperature RangeEAWAWKEPSASKConstantan foil in combination with a tough, flexible, polyimide backing.Fully encapsulated constantan gages with high-endurance leadwires.Fully encapsulated K-alloy gages with high-endurance leadwires.Annealed constantan foil with tough, high-elongation polyimide backing.Fully encapsulated constantan gages with solder dots.Fully encapsulated K-alloy gages with solder dots. 5% 2% 1.5% 20% 2% 1.5%–100 to 350 F (–75 to 175 C)–100 to 400 F (–75 to 205 )–452 to 550 F (–269 to 290 C)–100 to 400 F (–75 to 205 C)–100 to 400 F (–75 to 205 C)–452 to 450 F (–269 to 230 C)Note 1: Insert desired S-T-C number in spaces marked XX.Note 2: Tolerance is increased when Option W, E, SE, LE, or P is specified.Note 3: Products with designations and options shown in bold are not RoHS compliant.*Options available but not normally recommended. See Optional Features datasheet for details.Document No.: 11527Revision: 20-Jan-2016For technical questions, 79
250UTGeneral Purpose Strain Gages—Tee RosetteGAGE PATTERN ESee Note 1, 3See Note 2See Note 3120 0.4%350 0.4%1000 0CP2P2P2DESCRIPTIONTwo-element 90 tee rosette for general-purpose use.Exposed solder tab area 0.13 x 0.10 in (3.3 x 2.5 mm).actual sizeLegendES Each SectionS Section (S1 Section 1)GAGE DIMENSIONSGage Length0.250 ES6.35 ESOverall Length0.450 CP11.43 CPGrid Width0.290 ES7.37 ESCP Complete PatternM MatrixOverall Width0.650 CP16.51 CPMatrix Length0.5514.0inchmillimeterMatrix Width0.7418.8GAGE SERIES DATA — See Gage Series datasheet for complete specificationsSeriesCEADescriptionStrain RangeTemperature Range 5%–100 to 350 F (–75 to 175 C)Universal general-purpose strain gages.Note 1: Insert desired S-T-C number in spaces marked XX.Note 2: Products with designations and options shown in bold are not RoHS compliant.www.micro-measurements.com80For technical questions, contactmm@vpgsensors.comDocument No.: 11300Revision: 25-Aug-2015
Other Tee Rosette PatternsGeneral Purpose Strain GagesGAGE SERIESSee Note 1GAGE PATTERN030TUinches120, 3500.03EA, EP, SA, SKactual sizeGAGE LENGTHGAGE RESISTANCE(OHMS)millimeters0.76Miniature 90 tee rosette. Sections are electrically independent.Matrix size: 0.25L x 0.25W in. (6.4L x 6.4W mm)030TYEA, EP, SA, SKactual size120, 3500.030.760.030.76Miniature 90 tee rosette with large solder tabs.Matrix size: 0.30L x 0.15W in. (7.6L x 3.8W mm)030WTWA, WK, SA, SKactual size120Miniature two-element 90 tee stacked rosette. See also 032WT pattern.Matrix size: 0.17L x 0.19W in. (4.3L x 4.8W mm)032WTCEAactual size1200.0320.81Miniature two-element 90 stacked rosette. Exposed solder tab area is 0.07 x0.04 in (1.8 x 1.0 mm). Maximum operating temperature 150 F ( 65 C).Matrix size: 0.30L x 0.30W in. (7.6L x 7.6W mm)044TPEA, SAactual size3500.0441.120.051.27Miniature high-resistance 90 tee rosette.Matrix size: 0.14L x 0.20W in. (3.6L x 5.1W mm)050TGEA, WA, EP, SAactual size350Miniature high-resistance 90 tee rosette. Sections have a common solder tab.Matrix size: 0.34L x 0.17W in. (8.6L x 4.3W mm)Note 1: Products with designations and options shown in bold are not RoHS compliant.See strain-gages/other-tee-rosettes/ for complete specifications.Document No.: 11322Revision: 21-Jan-2016For technical questions, 81
Other Tee Rosette PatternsGeneral Purpose Strain GagesGAGE SERIESSee Note 1GAGE PATTERN060WTinches120, 350, 10000.061.520.0621.570.12.54WA, WK, SA, SKactual sizeGAGE LENGTHGAGE RESISTANCE(OHMS)millimetersSmall two-element 90 tee stacked rosette.Matrix size: 0.24L x 0.30W in. (6.1L x 7.6W mm)062TZEA, WA, WK, SA, SKactual size120, 350General-purpose 90 tee rosette.Matrix size: 0.28L x 0.26W in. (7.1L x 6.6W mm)100TGEA, WA, SA350, 1000Small high-resistance 90 tee rosette for general-purpose use.actual sizeMatrix size: 0.50L x 0.19W in. (12.7L x 4.8W mm)WA, WD, WK, SA, SK,SD120WTactual size120, 3500.123.050.1253.18Two-element 90 tee stacked rosette.Matrix size: 0.34L x 0.40W in. (8.6L x 10.2W mm)125TAEA, WA, WK, SA, SKactual size120, 350General-purpose two-element 90 tee rosette. Sections have a commonelectrical connection. See also 125TB pattern.Matrix size: 0.36L x 0.41W in. (9.1L x 10.4W mm)EA, EK, WA, WK, SA,SK125TBactual size350, 10000.1253.18General-purpose two-element 90 tee rosette. Same geometry as 125TA butwith higher resistance. Sections have common electrical connection. EK-Seriesgages are supplied with duplex copper dots (DD) when optional feature W orSE is not specified.Matrix size: 0.36L x 0.44W in. (9.1L x 11.2W mm)Note 1: Products with designations and options shown in bold are not RoHS compliant.See strain-gages/other-tee-rosettes/ for complete specifications.www.micro-measurements.com82For technical questions, contactmm@vpgsensors.comDocument No.: 11322Revision: 21-Jan-2016
Other Tee Rosette PatternsGeneral Purpose Strain GagesGAGE SERIESSee Note 1GAGE PATTERN125TFGAGE LENGTHGAGE RESISTANCE(OHMS)inches120, 3500.125EA, SA, SKmillimeters3.18General-purpose two-element 90 tee rosette with narrow pattern geometry.Sections have a common electrical connection.actual sizeMatrix size: 0.59L x 0.21W in. (15.0L x 5.3W mm)EA, ED, WA, WK, EP,SA, SK125TQactual size125VA350, 10000.1253.18General-purpose two-element 90 tee rosette. EK-Series gages are suppliedwith duplex copper dots (DD) when optional feature W or SE is not specified.Matrix size: 0.42L x 0.47W in. (10.7L x 11.9W mm)EA, EP, SA, SK350, 10000.1253.18General-purpose two-element 90 tee rosette with high-resistance grid. Seealso 125VB pattern.actual size125VBMatrix size: 0.64L x 0.23W in. (16.3L x 5.8W mm)EA, EP, SA, SK120, 3500.1253.18General-purpose two-element 90 tee rosette. Similar to 125TF pattern exceptsections are electrically independent. See also 125VA pattern.actual sizeMatrix size: 0.64L x 0.23W in. (16.3L x 5.8W mm)EA, EK, WA, WK, SA,SK250TB350, 10000.256.35General-purpose two-element 90 tee rosette. EK-Series gages are suppliedwith duplex copper pads (DP) when optional feature W or SE is not specified.actual size250WQMatrix size: 0.63L x 0.81W in. (16.0L x 20.6W mm)CEA3500.256.35Two-element 90 tee stacked rosette. Maximum operating temperature 150 F( 65 C). Exposed solder tab area is 0.11 x 0.07 in (2.8 x 1.8 mm).actual sizeMatrix size: 0.55L x 0.55W in. (14.0L x 14.0W mm)Note 1: Products with designations and options shown in bold are not RoHS compliant.See strain-gages/other-tee-rosettes/ for complete specifications.Document No.: 11322Revision: 21-Jan-2016For technical questions, 83
Other Tee Rosette PatternsGeneral Purpose Strain GagesGAGE SERIESSee Note 1GAGE PATTERNinches120, 3500.25WA, WD, WK, SA, SK,SD250WTactual sizeGAGE LENGTHGAGE RESISTANCE(OHMS)millimeters6.35Two-element 90 tee stacked rosette.Matrix size: 0.51L x 0.60W in. (13.0L x 15.2W mm)Note 1: Products with designations and options shown in bold are not RoHS compliant.See strain-gages/other-tee-rosettes/ for complete specifications.www.micro-measurements.com84For technical questions, contactmm@vpgsensors.comDocument No.: 11322Revision: 21-Jan-2016
General Purpose Strain Gages—Tee Rosette GAGE PATTERN DATA actual size GAGE DESIGNATION See Note 1, 3 RESISTANCE (OHMS) See Note 2 OPTIONS AVAILABLE See Note 3 EA-XX-050TG-350 WA-XX-050TG-350 EP-08-050TG-350 SA-XX-050TG-350 350 0.2% 350 0.4% 350 0.2% 350 0.4% L, LE DESCRIPTION Miniature high-
For measuring the strain in three different directions strain rosettes are used. Strain rosettes are three strain gages positioned in a rosette-like layout. Therefore by measuring three linearly independent strain in three direction, the components of the
4" Tap Tee - Long 50 4" Tap Tee - Short 50 4" Internal Tap Tee - Short 50 4" Internal Tap Tee - Long 50 5" Tap Tee 25 6" Tap Tee 25 STRAIGHT TEES 3" Straight Tile Tee (Injection Molded Only) 25 4" Straight Tile Tee (Injection & Blow Molded) 25 5" Straight Tile Tee (Blow Molded Only) 10 6" Straight Tee (Blow Molded Only) 10 .
Strain Gage Rosettes: Selection, Application and Data Reduction t e c H n o t e Strain Gages and Instruments tech note tn-515 For technical support, contact micro-measurements@vishay.com www.vishaymg.com 151 revision 25-mar-08 1.0 Introduction A strain gage rosette is, by definition, an arrangement of two or more closely positioned gage grids .
Armstrong have an ongoing fire testing programme. . Cross Tee centres Cross Tee Main Runner Cross Tee centres Cross Tee Main Runner Cross Tee centres Cross Tee Main Runner 300 mm *(3) 3.34 lm 300 mm *(3) 3.34 lm 300 mm *(3) 3.34 lm . 5.On the
connect a pipe adapter to back of stove; attach pipe to penetrate wall so vertical section from tee will be 3" from the exterior of the wall. attach a single tee or a double tee with clean-out adapter, and proceed up the wall. attach a tee support/wall strap just above the tee. a tee support/ wall strap must be placed every 4-feet along the
Before we start explaining gage patterns, it is important to explain what are Strain rosettes. Strain rosette A single strain gage can only measure in one direction. To overcome this, we use a
Absolute Maximum Shear strain Strain Gauge Strain Rosettes. Aerospace Structural Analysis M. F. GHANAMEH 2017-2018-4-Plane-Strain Vs Plane-Stress Plane Stress the dimension of the structure in one direction, is very large in com
9781860960147 Jazz Piano Grade 5: The CD 22.92 17.24 18.76 19.83 9781860960154 Jazz Piano from Scratch 55.00 41.36 45.02 47.58 9781860960161 Jazz Piano Aural Tests, Grades 1-3 18.15 13.65 14.86 15.70 9781860960505 Jazz Piano Aural Tests, Grades 4-5 15.29 11.50 12.52 13.23 Easier Piano Pieces (ABRSM)
