ANSI-ISO Boring Bars

2y ago
25 Views
3 Downloads
556.43 KB
6 Pages
Last View : 2d ago
Last Download : 5m ago
Upload by : Ronan Garica
Transcription

ANSI-ISO Boring Barswith through 10808Solid steel bar with coolant holePositiveInsertsSumitomo Cat. No.DCFK Min.BoreARight HandLeft Hand11 PositiveGage InsertA06SCFPR2A06SCFPL2CPMT21.513/86.250-4 .52CPMT32.521/25/83/418101012.312.406.500.640-2 0 0 0 X081/16-27 NPT1/8-27 NPT1/8-27 NPT1/4-18 illed hole only. No threads.Threading,Grooving,& DAFK858C58PCBN& PCDInserts08Solid steel bar with coolant holeToolholdersSumitomo Cat. No.DCFK Min.BoreALeft Hand7 PositiveGage InsertA06SCLCR2A06SCLCL2CCMT21.513/86.250-15 312.406.406-13 -10 -10 MT32.52CCMT32.523/411012.500.640-8 -7 .9301.2001/8-27 NPT1/4-18 NPTRight HandInsertScrewTorxWrench1/8*ST21.5TRX081/16-27 NPT1/8-27 NPT1/8-27 X15TRX15SwissToolholdersBoringBars*Drilled hole only. No threads.TechnicalInfoALMT171

nGeneralInfoANSI-ISO Boring BarsANSI-ISO Boring Barswith through coolantwith through Inserts58C58K855808K838Threading,Grooving,& Cut-OffInserts08Solid steel bar with coolant holePositiveInsertsSumitomo Cat. No.Sumitomo Cat. No.DAce-FixInsertsNegativeInsertsCSolid steel bar with coolant holePositiveInsertsAFRight HandLeft Hand11 PositiveGage CPMT32.52CPMT32.523/81/25/85/83/41CF6810101012K .250.312.406.406.500.640-6 -3 -2 -2 -2 0 Min.Bore.480.600.770.770.9301.200DA1/8*1/16-27 NPT1/8-27 NPT1/8-27 NPT1/8-27 NPT1/4-18 32.5ST32.5TRX08TRX08TRX08TRX15TRX15TRX15CFK Min.BoreARight HandLeft Hand7 PositiveGage 1DCMT21.513/81/268.375.437-7 -7 12.500.562.750-7 -7 -5 .850.9801.300InsertScrewTorxWrench1/8*1/16-27 NPTST21.5ST21.5TRX08TRX081/8-27 NPT1/8-27 NPT1/4-18 NPTST21.5ST32.5ST32.5TRX08TRX15TRX15*Drilled hole only. No threads.Ace-FixInsertsThreading,Grooving,& Cut-OffInserts*Drilled hole only. No threads.CeramicInsertsA-SDUPPCBN& PCDInsertsA-SDXP38DD258278Toolholders38C58PCBN& PCDInserts558K8C558K8AFAFCeramicInsertsL0858Solid steel bar with coolant hole08ToolholdersSolid steel bar with coolant holeSumitomo Cat. No.Sumitomo Cat. No.SwissToolholdersBoringBarsDDCFK Min.BoreAInsertScrewTorxWrenchRight HandLeft Hand11 PositiveGage InsertCFLK Min.BoreAInsertScrewTorxWrenchRight handLeft Hand11 PositiveGage InsertA08SDXPR2A08SDXPL2DPMT21.511/28.4378-1/20 .730 1/16-27 3 0.50010-1/20 .8501/8-27 2.750-2 0 0 0 523/411012.567.75010-3/412-3/4-2 0 .980 1/8-27 NPT1.300 1/4-18 s*Drilled hole only. No threads.TechnicalInfoDo not exceed a 3:1 boring bardiameter to overhang ratio: 1 dia.bar 3 maximum overhang. Thiswill provide maximum rigidity andminimal chatter for steel shank bars.ALMTTechnicalInfoALMT172173

nGeneralInfoANSI-ISO Boring BarsANSI-ISO Boring Barswith through coolantwith through egativeInsertsK80817830'CeramicInsertsCFK Min.BoreSolid steel bar with coolant holePositiveInsertsDARight HandLeft Hand7 PositiveGage 1.511/28.312-13 .6001/16-27 TCMT21.51TCMT32.525/83/41010.406.500-10 -8 .770.9301/8-27 NPT1/8-27 52112.640-7 1.2001/4-18 NPTST32.5TRX15A-STFPCFRight HandLeft T2215/83/41010.500.562-6 -5 A16SVQBR3A16SVQBL3VBMT332112.750-6 AInsertScrewTorxWrench.850 1/8-27 NPT.980 1/8-27 NPTST21.5ST21.5TRX08TRX081.300 1/4-18 ACCK8Min.BoreThreading,Grooving,& Cut-OffInsertsD08K 5 PositiveGage InsertA-SVUB08FPCBN& PCDInserts08Sumitomo Cat. No.Sumitomo Cat. No.DThreading,Grooving,& Cut-OffInserts358K8Solid steel bar with coolant tsAFPCBN& PCDInserts358K8380808Solid steel bar with coolant holeSolid steel bar with coolant holeToolholdersSumitomo Cat. No.ToolholdersSumitomo Cat. No.DDRight A08STFPR2A10STFPR2A12STFPR3A16STFPR3Left HandCFK 11 PositiveGage InsertA05STFPL1.8 2Min.BoreAInsertScrewTorxWrench5/163/856.219.250-8 -4 101012.312.406.500.640-2 0 -2 0 .600.770.9301.2001/16-27 NPT1/8-27 NPT1/8-27 NPT1/4-18 NPTST21.5ST21.5ST32.5ST32.5TRX08TRX08TRX15TRX15CFK Min.BoreARight HandLeft Hand5 PositiveGage 2A16SVUBL3VBMT221VBMT3323/411012.562.750-5 -5 .9801.300A20SVUBL3A24SVUBL3VBMT332VBMT3321 1/41 1/214141.0001.250-8 -8 2.0002.250InsertScrewTorxWrench1/8-27 NPT1/4-18 NPTST21.5ST32.5TRX08TRX151/4-18 NPT1/4-18 s*Drilled hole only. No threads.TechnicalInfoTechnicalInfoALMTALMT174175

nGeneralInfoANSI-ISO Boring BarsANSI-ISO Carbide Shank Boring Barswith through coolantwith through ading,Grooving,& o Cat. No.Sumitomo Cat. No.DAce-FixInserts08Solid carbide bar with fixed steel head and coolant holeSolid steel bar with coolant holePositiveInsertsRight HandLeft Hand11 PositiveGage 10K .250.312.406Min.Bore-5 -2 -3 .480.600.770DA1/8*1/16-27 NPT1/8-27 08TRX08Right HandLeft HandCFK 11 PositiveGage InsertE05STFPR1.8 E05STFPL1.8 TPMT1.81.51*Through hole only. No threads.5/165.219-8 .062TorxWrenchST21.5TRX08Threading,Grooving,& Cut-OffInserts08K8DAD08Sumitomo Cat. No.7 PositiveGage 3/41CF66101012.250.312.406.500.625*Through hole only. No threads.PCBN& PCDInsertsK -15 -13 -10 -8 -7 Sumitomo Cat. No.CSolid carbide bar with fixed steel head and coolant holeD08Solid carbide bar with fixed steel head and coolant hole58K8Left HandCeramicInsertsAF58E-SCLCRight ISO-ANSI Carbide Shank Boring sMin.Bore*Drilled hole only. No threads.with through coolantPCBN& T32.5TRX08TRX08TRX15TRX15TRX15CFK Min.BoreARight HandLeft Hand7 PositiveGage InsertE06STFCR2E06STFCL2TCMT21.513/86.250-15 12.406.500-13 -10 -8 .600.770.930E16STFCR3E16STFCL3TCMT32.52112.640-7 5TRX15ToolholdersSwissToolholders*Through hole only. No threads.BoringBarsFor applications requiring largeroverhangs–5:1 ratios–select carbidebars with through coolant shanks.ALMTTechnicalInfoALMT176177

nGeneralInfoANSI-ISO Heavy Metal Shank Boring Barswith through coolant58J-SCLCDAFNegativeInserts58C58K808Heavy metal shank with coolant holePositiveInsertsSumitomo Cat. No.DAce-FixInsertsThreading,Grooving,& Cut-OffInsertsRight HandLeft Hand7 PositiveGage 32.52CCMT32.521/25/83/41CF881012K .312.406.500.640-13 -10 -8 -7 Min.BoreA.600.770.9301.2001/16-27 NPT1/8-27 NPT1/8-27 NPT1/4-18 X08TRX15TRX15TRX1508CeramicInsertsJ-STFCDAFPCBN& PCDInsertsC08K808Heavy metal shank with coolant holeToolholdersSumitomo Cat. No.DSwissToolholdersBoringBarsRight HandLeft 06STFCL2J08STFCL2J10STFCL2J12STFCL3J16STFCL3CFK 7 PositiveGage 1.513/81/268.250.312-15 -13 .480.6001/8*1/16-27 525/83/41101012.406.500.640-10 -8 -7 .770.9301.2001/8-27 NPT1/8-27 NPT1/4-18 NPTST21.5ST32.5ST32.5TRX08TRX15TRX15*Drilled hole only. No threads.TechnicalInfoALMT178

ANSI-ISO Anti Vibration Shank Boring Anti-Vibration ShankPositiveInsertsSumitomo Cat. No.DRight HandLeft Hand7 PositiveGage 3B16SCLCL3CCMT32.52CCMT32.52CCMT32.52CCFK Min.(for shortening)5/83/411010125 3/866 1/2.406.500.640-10 -8 -7 rooving,& Cut-OffInsertsB-STFC08DCeramicInsertsFCK808PCBN& PCDInserts08Anti-vibration shankSumitomo Cat. No.ToolholdersDCCFK Min.BoreRight HandLeft Hand7 PositiveGage InsertB10STFCR2B10STFCL2TCMT21.515/8105 3/8.406-10 3TCMT32.52TCMT32.523/41101266 1/2.500.640-8 -7 .9301.200ST32.5ST32.5TRX15TRX15Min.(for ringBarsAlways calculate horsepower and thrust requirements before attempting anew application.TechnicalInfoALMT179

ANSI-ISO Boring Bars Sumitomo Cat. No. Sumitomo Cat. No. Sumitomo Cat. No. D C F K Min. 7 Positive Bore A Insert Torx Right Hand Left Hand Gage Insert Screw Wrench A08STFCR2 A08STFCL

Related Documents:

Boring Bars Boring Bars Since being the first in 1976 to introduce indexable boring bars, Sumitomo Electric has been continuously developing a comprehensive range which includes the SEC-Small Hole boring bar series, high rigidity boring head series, with either steel

Boring Bars Boring Bars Since being the first in 1976 to introduce indexable boring bars, Sumitomo Electric has been continuously developing a comprehensive range which includes the SEC-Small Hole boring bar series, high rigidity boring head series, with either steel / carbide shanks, and the latest anti-vibration mechanism

Behaviorally Anchored Rating Scales (BARS) BARS-Introduction Definition How BARS are developed Sample BARS Rater Training Inter-Rater Reliability. BARS Definition . Place in intervals on scale 8. Final form Handout (Step 5 sample) Handout (Step 8 samples) Sample ScenarioFile Size: 1MBPage Count: 13Explore furtherBehaviorally Anchored Rating Scale (BARS) Meaning, Steps .www.mbaskool.comBehaviorally Anchored Rating Scales - HR Letter Formatswww.yourhrworld.comBehind BARS: Evaluating Employees with Behaviorally .www.dummies.comWhat is a Behaviourally Anchored Rating Scale (BARS)? HRZonewww.hrzone.comBehaviorally Anchored Rating Scale (BARS): Benefits and .www.bryq.comRecommended to you based on what's popular Feedback

Boring System Foratrici Boring machines Perceuses multibroches Taladros The line of multiple boring machines called “BORING SYSTEM” was founded on 1999. Over the years BORING SYSTEM technical qualities and design of these machines have been continuously updated and improved.

Boring bar assembly, with optics, 12 ft (365.8 cm) 54580 Boring bar assembly, with optics, 14 ft (426.7 cm) 54581 Boring bar assembly, with optics, 16 ft (487.7 cm) 54582 Boring bar assembly, with optics, 18 ft (548.6 cm) 54583 Boring bar assembly, with optics, 20 ft (609.6 cm) 54584 5 Boring Diameter Ranges (select tooling in next step)

4 Boring Bar , Contginued (8 inch (203.2 mm) diameter) Gun-drilled bars with optical targets: Boring bar assembly, with optics, 8 feet (243.8 cm) 17602 Boring bar assembly, with optics, 10 feet (304.8 cm) 17603 Boring bar assembly, with optics, 12 feet (365.8 cm) 17604 Boring bar assembly, with optics, 14 feet (426.7 cm) 17605

E2 E Boring Bars SEC-Boring Tools Series Full Support for Boring in Turning Applications Guide for Selection by Application Application Stop Boring Bottom Facing Spherical Internal Facing Insert shape System/Shank type Polygon /OthersW Trangle /Othe

ISO 10381-1:2002 da ISO 10381-2:2002 da ISO 10381-3:2001 da ISO 10381-4:2003 da ISO 10381-5:2001 da ISO 10381-6:1993 da ISO 10381-7:2005 ne ISO 10381-8:2006 ne ISO/DIS 18512:2006 ne ISO 5667-13 da ISO 5667-15 da Priprema uzoraka za laboratorijske analize u skladu s normama: HRN ISO 11464:2004 ne ISO 14507:2003 ne ISO/DIS 16720:2005 ne