Bobcat T250 Operation Manual - Ardiehl.de

2y ago
25 Views
2 Downloads
4.52 MB
129 Pages
Last View : 1d ago
Last Download : 2m ago
Upload by : Carlos Cepeda
Transcription

ENOperation&MaintenanceManualS/N 525613400 & AboveS/N 525712100 & AboveEQUIPPED WITHBOBCAT INTERLOCKCONTROL SYSTEM (BICS )6904182-EN (04-05)Printed in Europe Bobcat Europe 2005

OPERATOR SAFETY WARNINGSWARNINGOperator must have instructionsbeforerunningthemachine.Untrained operators can causeinjury or death.CORRECTW-2001-1285Safety Alert Symbol: This symbol with a warning statement,means: “Warning, be alert! Your safety isinvolved!” Carefully read the messagethat follows.CORRECTCORRECTB-15570Always use the seat bar andfasten seat belt snugly.Always keep feet on the foot pedalsor footrests when operating loader.B-15652Neveruseloaderwithoutoperator cab with ROPS andFOPS approval. Fasten your seatbelt.WRONGWRONGB-15260B-15654Do not use loader in atmospherewith explosive dust or gas orwhere exhaust can contactflammable material.WRONGB-15656Never exceed rated operatingcapacity.Never carry riders.Keep bystanders away from workarea.WRONGB-10731aNever use the loader withoutinstructions. See machine signs(decals), Operation & MaintenanceManual and Handbook.WRONGB-15653Never use loader as man lift orelevating device for ts as low as possible.Do not travel or turn with liftarms up.Load, unload and turn on flatlevel ground.WRONGB-15661Never leave loader with enginerunning or with lift arms up.To park, engage parking brakeand put attachment flat on theground.B-15658Never modify equipment.Use only attachments approvedby Bobcat Company for thismodel loader.SAFETY EQUIPMENTThe Bobcat loader must be equipped with safety items necessary for each job. Ask your dealer for information on the safeuse of attachments and accessories.1. SEAT BELT: Check belt fasteners and check for damaged webbing or buckle.2. SEAT BAR: When up, it must lock the loader controls.3. OPERATOR CAB (ROPS and FOPS): It must be on the loader with all fasteners tight.4. HANDBOOK: Must be in the cab.5. SAFETY SIGNS (DECALS): Replace if damaged.6. SAFETY TREADS: Replace if damaged.7. GRAB HANDLES: Replace if damaged.8. LIFT ARM SUPPORT DEVICE: Replace if damaged.9. PARKING BRAKE10. BOBCAT INTERLOCK CONTROL SYSTEM (BICS )OSW10-1003U.S. Publication 6904182 (3-05) (1)

FOREWORDCONTENTSFOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IIIOPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .OI-1SAFETYPREVENTIVE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PM-1SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XIOPERATINGINSTRUCTIONSSPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SPEC-1SYSTEM SETUP & ANALYSIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA-1PREVENTIVEMAINTENANCEREFERENCE INFORMATIONWrite the correct information for YOUR Bobcat Loader in the spaces below. Always usethese numbers when referring to your Bobcat loader.SYSTEM SETUP& ANALYSISLoader Serial NumberEngine Serial NumberSPECIFICATIONSNOTES:YOUR BOBCAT DEALER:ADDRESS:PHONE:Bobcat EuropeJ. Huysmanslaan 59B-1651 LOTBelgiumIT250 Bobcat LoaderOperation & Maintenance Manual

IIT250 Bobcat LoaderOperation & Maintenance Manual

FOREWORDFOREWORDThis Operation & Maintenance Manual was written to give the owner/operator instructionson the safe operation and maintenance of the Bobcat loader. READ AND UNDERSTANDTHIS OPERATION & MAINTENANCE MANUAL BEFORE OPERATING YOUR Bobcatloader. If you have any questions, see your Bobcat dealer. This manual may illustrateoptions and accessories not installed on your loader.BOBCAT COMPANY IS ISO 9001:2000 CERTIFIED. VDELIVERY REPORT . VIENGINE SERIAL NUMBER . VIFEATURES, ACCESSORIES AND ATTACHMENTS . VIIIAttachments . IXBuckets Available . IXOptions and Accessories . VIIIStandard Items. VIIISYSTEM SETUP& ANALYSISLOADER SERIAL NUMBER . VIMACHINE IDENTIFICATION . VIITRANSLATIONSMOTOR OIL. VREGULAR MAINTENANCE ITEMS . VSERIAL NUMBER LOCATIONS. VIIIIT250 Bobcat LoaderOperation & Maintenance Manual

IVT250 Bobcat LoaderOperation & Maintenance Manual

BOBCAT COMPANY IS ISO 9001:2000 CERTIFIEDISO 9001:2000 is a set of international standards that control the processes and procedures which we use to design,develop, manufacture, distribute, and service Bobcat products.British Standards Institute (BSI) is the Certified Registrar Bobcat chose to assess the Company’s compliance with theISO 9001:2000 set of standards. The BSI registration certifies that the two Bobcat manufacturing plants and the Bobcatcorporate offices (Gwinner, Bismarck & West Fargo) in North Dakota are in compliance with ISO 9001:2000. Only certifiedassessors, like BSI, can grant registrations.ISO 9001:2000 means that as a company we say what we do and do what we say. In other words, we have establishedprocedures and policies, and we provide evidence that the procedures and policies are followed.REGULAR MAINTENANCE ITEMSENGINE OIL FILTER (6 Pack)6665603BATTERY6665427FUEL FILTER6667352FLUID, Hydraulic/Hydrostatic6903117 - (9,5 L)6903118 - (19 L)6903119 - (215 L)AIR FILTER, Outer6666375RADIATOR CAP6733429AIR FILTER, Inner6666376PROPYLENE GLYCOL ANTI-FREEZE,Premixed [-37 C (-34 F)]6724094HYDROSTATIC FILTER6661248PROPYLENE GLYCOL ANTI-FREEZE,Concentrate6724354HYDROSTATIC FILTER, In-Line6661807MOTOR OIL6667299 SAE 15W40 CE/SG (12 L) 6724558 SAE 15W40 CE/SG (3,8 L)6657301 SAE 10W30 CE/SG (12 L) 6724557 SAE 10W30 CE/SG (3,8 L)6903109 - SAE 30W CE/SG (12 L)6903110 - SAE 30W CE/SG (3,8 L)V6674294 SAE 15W40 CE/SG (9,5 L)6674205 SAE 10W30 CE/SG (9,5 L)6903111 - SAE 30W CE/SG (9,5 L)T250 Bobcat LoaderOperation & Maintenance Manual

SERIAL NUMBER LOCATIONSENGINE SERIAL NUMBERAlways use the serial number of the loader whenrequesting service information or when ordering parts.Early or later models (identification made by serialnumber) may use different parts, or it may be necessaryto use a different procedure in doing a specific serviceoperation.Figure 21Figure 1P-48339The engine serial number is located on the side of theengine (Item 1) [Figure 2] above the oil filter.DELIVERY REPORTP-43900Figure 3LOADER SERIAL NUMBERThe loader serial number plate is located on the outsideof the loader frame [Figure 1].Explanation of loader Serial Number:XXXXXXXXXModule 2. - ProductionSequence (Series)Module 1. - Model / EngineCombinationB-163151. The four digit Model/Engine Combination Modulenumber identifies the model number and enginecombination.The delivery report must be filled out by the dealer andsigned by the owner or operator when the Bobcat loaderis delivered. An explanation of the form must be given tothe owner. Make sure it is filled out completely [Figure 3].2. The five digit Production Sequence Number identifiesthe order which the loader is produced.VIT250 Bobcat LoaderOperation & Maintenance Manual

MACHINE IDENTIFICATION FRONTLIGHTSOPERATOR CAB(ROPS & FOPS)* REAR AUXILIARYQUICK COUPLERSGRABHANDLESOPERATOR SEATwith SEAT BELT& SEAT BARFRONT AUXILIARYQUICK COUPLERSTILTCYLINDERS† BUCKETSTEPSB-19872BUCKETSTEPSLIFT ARMSUPPORT DEVICELIFTCYLINDERREARGRILLLIFT ARMREARLIGHTREARDOORTAILLIGHTTRACKSB-19875* Option or Field Accessory† Many buckets and other attachments are available. ROPS, FOPS - Roll Over Protective Structure per SAE J1040 and ISO 3471, and Falling Object Protective StructureISO 3449, Level I. Level II is available.VIIT250 Bobcat LoaderOperation & Maintenance Manual

FEATURES, ACCESSORIES AND ATTACHMENTSStandard ItemsOptions and AccessoriesModel T250 Bobcat loaders are equipped with thefollowing standard items:Below is a list of some equipment available from yourBobcat Loader dealer as Dealer and / or Factory InstalledAccessories and Factory Installed Options. See yourBobcat dealer for other available options, accessoriesand attachments. Adjustable suspension seatBobcat Interlock Control System (BICS)Bob-Tach frameCab doorCE certificationDeluxe operator cab*Includes interior cab foam, side, top and rearwindows, accessory wire harness, dome light, andelectrical power portElectrically activated proportional front auxiliaryhydraulicsEngine/hydraulics system shutdownHydraulic bucket positioning (including ON/OFFswitch)InstrumentationLift arm supportOperating lights, front and rearParking brakeSeat barSeat beltTracks – rubber – 450 mmTurbo-charger with approved spark arrestor * Roll Over Protective Structure (ROPS) – meetsrequirements of SAE-J1040 and ISO 3471Dealer Installed Accessories 7-pin attachment control kit (standard withT250H) Back up alarm kit Cab enclosure kit Door sensor kit FOPS kit** Four-point lift kit Fresh air heater kit Front door kit Fuel cap locking kit Operator cab, CE, enclosure kit Plumbing kit for fresh air heater Rear auxiliary hydraulic kit Replacement Bob-Tach Single-point lift kitSpecial applications kitFactory Options Advanced Control System (ACS) Advanced Hand Controls (AHC) Air conditioning Cab enclosure with heat Deluxe instrument panel Power Bob-Tach Selectable Joystick Controls (SJC)** Falling Objects Protective Structure (FOPS) –meets requirements of SAE-J1043 and ISO 3449,Level ISpecifications subject to change without notice.VIIIT250 Bobcat LoaderOperation & Maintenance Manual

Buckets AvailableFEATURES, ACCESSORIES AND ATTACHMENTS(CONT’D)These and other attachments are approved for use onthis model loader. Do not use unapproved attachments.Attachments not manufactured by Bobcat may not beapproved.The versatile Bobcat loader quickly turns into a multi-jobmachine with a tight-fit attachment hook-up . . . frombucket to grapple to pallet fork to backhoe and a varietyof other attachments.BUCKETSee your Bobcat dealer for more details on these andother attachments and field accessories.Many bucket styles, widths and different capacities areavailable for a variety of different applications. Theyinclude Construction & Industry, Low profile, Fertilizerand Snow, to name a few. See your Bobcat dealer for thecorrect bucket for your Bobcat loader and application.Increase the versatility of your Bobcat loader with avariety of bucket styles and sizes.AttachmentsFor specific model availability, see Bobcat Product Price List. Angle bladeAngle broom*†AugerBackhoeBox bladeBrushcat rotary cutterBucketsChipper*Combination bucketConcrete pump*Cutter crusher*DiggerDozer blade*Dumping hopperFarm grappleGrader*Hydraulic breaker**Industrial grappleLandplaneLandscape rakeMixing bucket*Pallet fork – hydraulicPallet fork – standardPlaner*Rear stabiliserScarifierSnow blower*Sod layer*Soil conditioner*SpreaderStump grinder*Super scraperSweeperThree-point hitchTillerTilt-Tatch Tracks, steelTree transplanter*Trench compactorTrencherUtility forksUtility frameVibratory rollerWater kitWheel sawWhisker broom* Attachment control kit required.** When operating the loader with this attachment, a Special Applications Kit, which includes a 12 mm Lexanfront door with 6 mm top and rear windows, must be used.† Optional water kit.IXT250 Bobcat LoaderOperation & Maintenance Manual

XT250 Bobcat LoaderOperation & Maintenance Manual

SAFETYFIRE PREVENTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .XVMACHINE SIGNS (DECALS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XVISAFETYSAFETY INSTRUCTIONS FOR BOBCAT SKID-STEER LOADERS ANDATTACHMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XIIISafe Operation Is The Operator’s Responsibility . . . . . . . . . . . . . . . XIIISafe Operation Needs A Qualified Operator. . . . . . . . . . . . . . . . . . . XIVXIT250 Bobcat LoaderOperation & Maintenance Manual

XIIT250 Bobcat LoaderOperation & Maintenance Manual

SAFETY INSTRUCTIONS FOR BOBCATSKID-STEER LOADERS AND ATTACHMENTS Safe Operation Is The Operator’s ResponsibilityCarefully follow the operatinginstructions in this manual.andmaintenanceAn Operator’s Handbook is fastened to the operatorcab of the loader. Its brief instructions are convenientto the operator. The Handbook is available from yourdealer in an English edition or one of many otherlanguages. See your Bobcat dealer for moreinformation on translated versions.The Bobcat skid-steer loader is highly maneuverable andcompact. It is rugged and useful under a wide variety ofconditions. This presents an operator with hazardsassociated with off highway, rough terrain applications,common with Bobcat loader usage.The Bobcat has an internal combustion engine withresultant heat and exhaust. All exhaust gasses can kill orcause illness so use the loader with adequate ventilation.The loader has a spark arrestor exhaust system ormuffler which is required for operation in certain areas.The dealer explains the capabilities and restrictions of theBobcat loader and attachments for each application. Thedealer demonstrates the safe operation according toBobcat instructional materials, which are also available tooperators. The dealer can also identify unsafemodifications or use of unapproved attachments. Theattachments and buckets are designed for a RatedOperating Capacity (some have restricted lift heights)and secure fastening to the Bobcat loader. The user mustcheck with the dealer, or Bobcat literature, to determinesafe loads of materials of specified densities for theloader-attachment combination.The following publications and training materials provideinformation on the safe use and maintenance of theloader and attachments: The Delivery Report is used to assure that completeinstructions have been given to the new owner andthat the machine is in safe operating condition. The Operation & Maintenance Manual delivered withthe Bobcat loader or attachment gives operatinginformation as well as routine maintenance andservice procedures. It is a part of the loader and canbe stored in a container provided inside the cab of theloader. Replacement Operation & MaintenanceManuals can be ordered from your Bobcat dealer. Machine signs (decals) instruct on the safe operationand care of your Bobcat loader or attachment. Thesigns and their locations are shown in the Operation &Maintenance Manual. Replacement signs areavailable from your Bobcat dealer.XIIIT250 Bobcat LoaderOperation & Maintenance Manual

BEFORE OPERATING THE BOBCAT LOADERA Qualified Operator Must Do The Following:Understand the Written Instructions, Rules andRegulationsSafety Alert SymbolThis symbol with a warning statement means:“Warning, be alert! Your safety is involved!”Carefully read the message that follows. The written instructions from Bobcat company includethe Delivery Report, Operation & MaintenanceManual, Operator’s Handbook and machine signs(decals). Check the rules and regulations at your location. Therules may include an employer’s work safetyrequirements. Regulations may apply to local drivingrequirements or use of a Slow Moving Vehicle (SMV)emblem. Regulations may identify a hazard such as autility line.WARNINGHave Training with Actual OperationOperator must have instructions before operating themachine. Untrained operators can cause injury ordeath. Operator training must consist of a demonstration andverbal instruction. This training is given by yourBobcat dealer before the product is delivered. The new operator must start in an area withoutbystanders and use all the controls until he canoperate the machine and attachment safely under allconditions of the work area. Always fasten seat beltbefore operating.W-2001-0502IMPORTANTThis notice identifies procedures which must befollowed to avoid damage to the machine.Know the Work ConditionsI-2019-0284 Know the weight of the materials being handled.Avoid exceeding the Rated Operating Capacity of themachine. Material which is very dense will be heavierthan the same volume of less dense material. Reducethe size of load if handling dense material. The operator must know any prohibited uses or workareas, for example, he needs to know aboutexcessive slopes.W-2044-1285 Know the location of any underground lines.The Bobcat loader and attachment must be in goodoperating condition before use. Wear tight fitting clothing. Always wear safety glasseswhen doing maintenance or service. Safety glasses,hearing protection or special applications kit arerequired for some work. See your dealer aboutBobcat Safety equipment.WARNINGWarnings on the machine and in the manuals are foryour safety. Failure to obey warnings can causeinjury or death.Check all of the items on the Bobcat Service ScheduleDecal under the 8-10 hour column or as shown in theOperation & Maintenance Manual.SI02-0903Safe Operation Needs A Qualified OperatorFor an operator to be qualified, he must not use drugs oralcoholic drinks which impair his alertness orcoordination while working. An operator who is takingprescription drugs must get medical advice to determineif he can safely operate a machine.XIVT250 Bobcat LoaderOperation & Maintenance Manual

FIRE PREVENTIONThe machines and some attachments have componentsthat are at high temperatures under normal operatingconditions. The primary source of high temperatures isthe engine and exhaust system. The electrical system, ifdamaged or incorrectly maintained, can be a source ofarcs or sparks.Flammable debris (leaves, straw, etc.) must be removedregularly. If flammable debris is allowed to accumulate, itcan cause a fire hazard. Clean often to avoid thisaccumulation. Flammable debris in the enginecompartment is a potential fire hazard.The spark arrestor exhaust system (if equipped) isdesigned to control the emission of hot particles from theengine and exhaust system, but the muffler and theexhaust gases are still hot. Do not use the machine where exhaust, arcs, sparksor hot components can contact flammable material,explosive dust or gases. The operator cab, engine compartment and enginecooling system must be inspected every day andcleaned if necessary to prevent fire hazards andoverheating. Check all electrical wiring and connections fordamage. Keep the battery terminals clean and tight.Repair or replace any damaged part. Check fuel and hydraulic tubes, hoses and fittings fordamage and leakage. Never use open flame or bareskin to check for leaks. Tighten or replace any partsthat show leakage. Always clean fluid spills. Do notuse gasoline or diesel fuel for cleaning parts. Usecommercial nonflammable solvents. Always clean the machine, disconnect the battery,and disconnect the wiring from the Bobcat controllersbefore welding. Cover rubber hoses, battery and allother flammable parts. Keep a fire extinguisher nearthe loader when welding. Have good ventilation whengrinding or welding painted parts. Wear dust maskwhen grinding painted parts. Toxic dust or gas can beproduced. Stop the engine and let it cool before adding fuel.No smoking! Use the procedure in the Operation & MaintenanceManual for connecting the battery. Use the procedure in the Operation & MaintenanceManual for cleaning the spark arrestor muffler(if equipped).Figure 4N-21901 Do not use ether or starting fluids on any engine whichhas glow plugs. These starting aids can causeexplosion and injure you or bystanders.Know where fire extinguishers and first aid kits arelocated and how to use them. Fire extinguishers areavailable from your Bobcat dealer. The fireextinguisher can be installed in the location shown in[Figure 4].SI03-0301XVT250 Bobcat LoaderOperation & Maintenance Manual

MACHINE SIGNS (DECALS)Follow the instructions on all the Machine Signs (Decals) that are on the loader. Replace any damaged machine signsand be sure they are in the correct locations. Machine signs are available from your Bobcat loader dealer.67339246728540671184067279266718397 (ACS)6735140SJC - 6734646SJC - 67346476718774(Inside Fuse Cover)67199516561383(Behind Bob-Tach)65659906577754 (2)6804114 (2)7113512High Flow Only6731757671839267183966718391(Behind Lift Arm Crossmember)6718393B-19872XVIT250 Bobcat LoaderOperation & Maintenance Manual

MACHINE SIGNS (DECALS) (CONT’D)Follow the instructions on all the Machine Signs (Decals) that are on the loader. Replace any damaged machine signsand be sure they are in the correct locations. Machine signs are available from your Bobcat loader dealer.67065586578368656057367089296717343 (2)(Under Cab)6809511 (4)(Under Cab)6708941 (2)6595014 (3)673453465652006717679Inside Rear DoorB-19875XVIIT250 Bobcat LoaderOperation & Maintenance Manual

XVIIIT250 Bobcat LoaderOperation & Maintenance Manual

OPERATING INSTRUCTIONSATTACHMENTS AND BUCKETS .OI-33Hand Lever Bob-Tach - Installing The Bucket Or Attachment .OI-34Hand Lever Bob-Tach - Removing The Bucket Or Attachment .OI-36Pallet Forks .OI-34Power Bob-Tach - Installing The Bucket Or Attachment .OI-37Power Bob-Tach - Removing The Bucket Or Attachment .OI-38Selecting The Correct Bucket .OI-33OPERATINGINSTRUCTIONSDAILY INSPECTION .OI-24Daily Inspection and Maintenance Checklist.OI-24DRIVING AND STEERING THE LOADER.OI-12Available Controls Configurations .OI-12Operation (SJC in ‘H’ Control Pattern) .OI-13Operation (SJC in ‘ISO’ Control Pattern) .OI-14Operation (Standard and ACS) .OI-12Using The Steering Levers To Stop The Loader .OI-15ENGINE SPEED CONTROL .OI-11Operation .OI-11HYDRAULIC CONTROLS.OI-16Advanced Control System (ACS) in HAND Control Mode .OI-17Attachment Control Device (ACD) (If Equipped) .OI-22Auxiliary Hydraulics Button - DISENGAGE.OI-20Auxiliary Hydraulics Button - MAXIMUM FLOW ONLY .OI-20Auxiliary Hydraulics Button - VARIABLE FLOW.OI-20hydrAulic controls (cont’d) .OI-23FRONT Auxiliary Hydraulics Operation - CONTINUOUS FLOW .OI-20FRONT Auxiliary Hydraulics Operation - MAXIMUM FLOW.OI-20FRONT Auxiliary Hydraulics Operation - VARIABLE FLOW.OI-20High-Flow Hydraulics Operation (If Equipped).OI-22Quick Couplers.OI-19REAR Auxiliary Hydraulics Operation .OI-21Releasing Hydraulic Pressure (Loader and Attachment) .OI-19Secondary Front Auxiliary Hydraulics (If Equipped).OI-21Selectable Joystick Control (SJC) - ‘H’ Control Pattern .OI-18Selectable Joystick Control (SJC) - ‘ISO’ Control Pattern.OI-18Standard Controls (Also ACS in Foot Pedal Mode) .OI-16INSTRUMENT PANEL IDENTIFICATION.OI-5Cab Light.OI-10Left Panel .OI-5Right Panel (Deluxe - With Keyless Start).OI-7Right Panel (Standard - With Key Switch).OI-6Option And Field Accessory Panels (If Equipped) .OI-9INCHING CONTROL.OI-11Operation .OI-11OI-1T250 Bobcat LoaderOperation & Maintenance Manual

OPERATING INSTRUCTIONS (CONT’D)LIFT ARM BY-PASS CONTROL . OI-10Operation. OI-10MONITORING THE DISPLAY PANEL . OI-32Deluxe Panel . OI-32Standard Panel . OI-32WARNING and SHUTDOWN . OI-32OPERATING PROCEDURE . OI-39Compact Track Loader Operating Tips . OI-41Foot Pedal Machines . OI-42Hand Control Machines (Includes ACS and SJC with H-PatternSelected) . OI-44Operating With A Full Bucket. OI-39Operating With An Empty Bucket . OI-40Selectable Joystick Control (SJC) with ‘ISO’ Pattern Selected. OI-46PARKING BRAKE . OI-23Operation. OI-23PARKING THE BOBCAT LOADER . OI-48Parking Procedure . OI-48PRE-STARTING PROCEDURES . OI-25Before Starting The Engine . OI-25SEAT BAR RESTRAINT SYSTEM . OI-15Operation. OI-15STARTING THE ENGINE (DELUXE PANEL, KEYLESS START) . OI-29Cold Temperature Starting. OI-30Starting Procedure . OI-29STARTING THE ENGINE (STANDARD PANEL, KEY SWITCH). OI-27Starting Procedure . OI-27STOPPING THE BOBCAT LOADER . OI-15Using The Steering Levers To Stop The Loader. OI-15STOPPING THE ENGINE . OI-31Stopping Procedure. OI-31TOWING THE LOADER. OI-50Towing Procedure . OI-50TRACTION LOCK OVERRIDE . OI-10Operation. OI-10OI-2T250 Bobcat LoaderOperation & Maintenance Manual

OPERATING INSTRUCTIONS (CONT’D)TRANSPORTING THE BOBCAT LOADER.OI-49Fastening To Transport Vehicle .OI-49Loading Onto Transport Vehicle .OI-49WARMING THE HYDRAULIC / HYDROSTATIC SYSTEM .OI-31Warming Procedure .OI-31OI-3T250 Bobcat LoaderOperation & Maintenance Manual

OI-4T250 Bobcat LoaderOperation & Maintenance Manual

INSTRUMENT PANEL IDENTIFICATIONThe left instrument panel is the same for both theStandard and Deluxe Instrument Panels [Figure OI-1].Left PanelThe table below shows the DESCRIPTION andFUNCTION/OPERATION for each of the components ofthe left panel.Figure CTION / OPERATION1TEMPERATURE GAUGEShows the engine coolant temperature.2HOURMETER / CODE DISPLAY /GLOW PLUG COUNTDOWNHOURMETER - Records operating hours of loader. CODE DISPLAY - Display numeric SERVICE CODES*relating to the loader monitoring system. COUNTDOWN - Preheat time remaining.3FUEL GAUGEShows the amount of fuel in the tank.4LIGHTS / HOLD FOR CODESLIGHTS - Press once for FRONT LIGHTS. Press a second time for FRONT AND REAR lights. Press a third timeto turn all lights off. HOLD FOR CODES - Press and hold two seconds for display of SERVICE CODES (Item 2).(CODES* show only when there is an error found by loader monitoring system.)5BUCKET POSITIONING (Option)Press to engage the BUCKET POSITIONING funct

T250 Bobcat Loader V Operation & Maintenance Manual BOBCAT COMPANY IS ISO 9001:2000 CERTIFIED ISO 9001:2000 is a set of international standards that control the processes and procedures which we use to design, devel

Related Documents:

Bobcat Company P.O. Box 6000 West Fargo, ND 58078 www.bobcat.com Operator Training Training kits, available through your Bobcat dealer’s parts department, let you train current and new operators and service technicians on the latest safety, operation and servicing functions on Bobcat

The Bobcat Filter Reference Guide is subject to change. Consult your Operation & Maintenance Manual for maintenance intervals and additional maintenance items. . Consult your Operation & Maintenance Manual for maintenance intervals and additional maintenance items. Skid-Steer Loader: Air Filter (Inner) . 843B: 6598362 6598492: 6659329 .

Bobcat S740 Engine Emissions Tier (EPA) Tier 4 Engine Cooling Liquid Engine Fuel Diesel Horsepower 74 hp Turbocharged Engine Engine Model 3.4L Bobcat Engine Engine Make Bobcat Cooling System 3.6 gal Gross HP 74 hp Net HP 74 hp Number of Cylinders 4 Displacement 208 in³ Torque (SAE NET) 243.4 ft·lbf Torque RPM 1,400 rpm Starter Horsepower 3.6 .

753 Bobcat Loader II Service Manual FOREWORD This manual is for the Bobcat loader mechanic. It provides necessary servicing and adjustment procedures for the Bobcat loader and its component parts and systems. Refer to the Operation & Maintenance Manual for opera

Consult your Bobcat Operation & Maintenance Manual. Antifreeze - Premix 1 Gal. Antifreeze - Concen. 1 Gal. REPLACEMENT TRACK OPTIONS. Alternator Belt W/O AC. 334 Compact Excavator Maintenance Items . Serial Numbers: 232511001 & Above, 232611001 & Above, 232711001 & Above. Genuine Bobcat Parts meet Bobcat Engineering's stringent quality and .

Bobcat Company P.O. Box 6000 West Fargo, ND 58078 www.bobcat.com Operator Training Training kits, available through your Bobcat dealer’s parts department, let you train current and new operators and service technicians on the latest safety, operation and servicing functions on Bobcat

Training Resources. Training kits, available through your Bobcat dealer’s parts department, let you train current and new operators and service technicians on the latest safety operation and servicing functions on Bobcat skid-steer loaders. A Spanish language version is also available. Check the Bobcat webs

and hold an annual E-Safety Week. Our Citizenship Award. 4 Through discussion in all our history themes – the rule of law is a key feature. RE and citizenship/PSHEE lessons cover religious laws, commandments and practices. In RE we encourage pupils to debate and discuss the reasons for laws so that all pupils understand the importance of them for their own protection. As part of the .