Alcoa Fastening Systems
AlcoaFasteningSystems
ContentsPageGeneral Information . A-2Features of KEENSERTS . A-3 - A-4Installation Instructions . A-5KNCM Series (miniature inserts metric). B-1KNM Series (lightweight inserts metric). B-2KNHM Series (heavy duty inserts metric). B-3 - B-4KNCA Series (miniature inserts imperial). C-1KNJ Series (lightweight inserts imperial).C-2 - C-3KNHJ Series (heavy duty inserts imperial). . C-4 - C-7KNHXHJ Series (extra heavy duty inserts imperial). C-8 - C-11Release June 2014AlcoaFasteningSystemsA-1
General InformationThe Camloc brand was established in 1937. Since that time our fastening systems have beensuccessfully integrated into numerous applications within many different rsoffasteningexperience.We provide local support for innovative, high quality fastening systems supplied globally to thestrictest environmental and working ryortelephone om/ClientDirectoryortelephone 971(4)3364917.IfISO/TS 16949: 2009idCBSIKikCDAKlhill MilKMK58PPTl448450809000DIN EN ISO 14001 : 2004Pleasefindadditional informationaboutourenvironmentalprogramunder: www.alcoa.com.Your Alcoa Fastening Systems teamDisclaimer:Parts listed are subject to technical changes. All dimensions in mm. All information is correct to the best of our knowledgeat the time of printing. No liability for disadvantages caused by printing errors or false application.A-2AlcoaFasteningSystemsRelease June 2014
FeaturesThreaded Insertsare high strength threaded inserts made from stainless steel 1.4305 or AISI303.They are passivated according to EN 2516 or AMS 2700. Ourstandard product range contains metric and imperial thread dimensions. Specials are available upon request.can be used in alloys, light materials, steel and cast iron to give increased threadstrength in these low strength materials. They are also be used for thread repair enabling thedamaged thread to be replaced with the same size crewfromgalling.have a positive mechanical lock against rotation and vibration when kees are installed. Kees are made from stainless steel AISI302.have 2 or 4 pre-assembled kees depending on the size of the external thread. Afterinstallation of the kees into the parent material the assembly is positively locked in place.Pull-out-strength for. Calculation is as follows:Pull-out-strength(N) shear engagement (mm2) x ultimate shear strength of parent material (N/mm2)Shear engagement areas are shown on thedata sheets, only valid for full installed.Release June 2014AlcoaFasteningSystemsA-3
FeaturesPart-no. example:Thepart-no.formetricKN H M Larecodedasfollows:8 X 1,25inside thread diameter x pitchlocking typemetricheavy KN H XH L 4 28 Jdesignates MIL-S-8879 interneal threadnumber of internal threads per inchinternal threads diameterin 1/16 inch increments (e.g. 4 4/16“ 1/4“)locking typeextra heavy dutyheavy dutyseriesA-4AlcoaFasteningSystemsRelease June 2014
Installation InstructionsInstallation:Drill- with standard drillCountersink- with cone countersink (80 - 100 )Thread- with standard tapScrew in- by hand or with installation tool(see installation data pages B-1 to B-4)Lock in Place- drive the kees into place by handor in a press with the appropriateinstallation toolInstallation depth of theThe installed depth of theis determined by the pre-assembled kees.is based on the depth of the countersink.Installation in hard materialsFor very hard materials with a hardness greater than 30 HRC or 300 Vickers it stepistomarkthepositionofthe kees on the parent material. To do this wind thein until the kees touchthe surface of the parent material.Mark the positions of the kees and unwind the.Then line up the blades of the broaching tool with the marked positions and push it inwith a hammer or under a press, remove the tool and install the.In some cases it may be necessary to run the tap back down the hole to clear out any burrs.Available for external metrical thread M5 and up and external imperial thread 1/4“ and up.Removal:1. DrillingDimensions seepages B1 to B4Release June 20142. Deflectkees 3. Remove insertinward andwith E-Z outbreak offtype toolAlcoaFasteningSystems4. Insert newas beforeA-5
KNCM SeriesPart-no.Standard type“S“DimensionsLocking X0,45KNCM3X0,5KNCML3X0,5KNCM4X0,7KNCML4X0,7Thread AØAclass 5HThread BØBclass 58,442,9Installation Release June 2014ØDmodifiedtap drill ØØEcountersink Ø 0,25ØFclass 6H4,1Thread FC 0,25C132,23,82,74,253,15,254,1Removal dimensionsDrillGmin.Handinstallation 256,1M6X0,756,5KRTM4-014,62,50 0,0803,4 -0,025 0,0803,9 -0,025 0,0804,4 -0,025 0,0805,5 -0,025AlcoaFasteningSystemsB-1
KNM SeriesPart-no.Standard type“S“DimensionsLocking 1,75Thread AØAclass 5HThread BØBclass ion KNML12X1,75B-2ØDmodifiedtap drill Ø6,90 0,100-0,025 0,1008,80 -0,025ØEcountersink Ø 0,25ØFclass 6H8,25Thread FC 0,30C187,6108,2129,51410,01611,2Removal dimensionsDrillGmin.Handinstallation 1,517,5KRTM12-0113,54,75 0,10010,80 -0,025 0,13012,80 -0,025 0,13014,75 -0,025AlcoaFasteningSystemsRelease June 2014
KNHM SeriesDimensionsPart-no.Standard type“S“Locking type“L“KNHM4X0,7Thread AØAclass 5HThread BØBclass ,6316,4470,2441,4608,5561,8Installation odifiedtap drill Ø 0,1006,90 -0,025KNHML12X1,75Release June 2014108,7129,51410,01610,01810,7Removal dimensionsDrillGmin.Handinstallation 2512,5KRTM5-027,54,7510,80 0,100-0,02512,25M12X1,2514,5KRTM6-029,54,7512,80 0,130-0,02514,25M14X1,516,5KRTM8-0211,54,7514,75 0,130-0,02516,25M16X1,518,5KRTM10-0213,54,7516,75 0X1,5KNHM12X1,758,010,25KNHML8X1,25KNHM10X1,58,258 0,100-0,025KNHML6X1,0KNHM8X1,25ØFclass 6HC18,80KNHML5X0,8KNHM6X1,0Thread FØEcountersink Ø 0,25C 0,30AlcoaFasteningSystemsB-3
KNHM SeriesPart-no.Standard type“S“DimensionsLocking 4X3,0KNHML24X3,0Thread AØAclass 5HThread BØBclass tallation ,5KNHM24X3,0KNHML24X3,0B-4ØDmodifiedtap drill Ø 0,13018,75 -0,025 0,13020,50 -0,025 0,13022,50 -0,025 0,13028,00 -0,025 0,13031,00 -0,025ØEcountersink Ø 0,25ØFclass 6H20,25Thread FC 0,30C12012,42212,42416,83017,53319,0Removal dimensionsDrillGmin.Handinstallation sRelease June 2014
KNCA SeriesPart-no.Standard type“S“DimensionsLocking type“L“Shearengagementinch² (mm²)Thread AØAThread BØBKNCA0256J2-56”UNCJ-3B8-32”UNC-3A0,0157 (10,1)KNCA0440J10-32”UNF-2A0,0302 UNF-2AKNC0632JKNCA0832J0,0302 (19,5)0,0329 (21,2)0,0329 (21,2)0,0669 (43,2)0,0669 (43,2)Installation 632JKNCL0632JKNCA0832JKNCAL0832JRelease June 2014ØDmodifiedtap drill ØinchØEcountersink Øinch.134 0,003-0,001.166 .001.161 0,003-0,001.194 .001.187 0,003-0,001.220.228 0,003-0,001.225- .000- .000 .001- .000 .001- .000Thread FØFG min.inch (mm)8-32UNC-2B0,140(3,56)10-32UNF-2BCinch (mm)C1inch (mm)0,12 (3,05)0,17 (4,32)0,17 (4,32)0,22 (5,59)0,088 (2,24)0,125 (3,18)0,125 (3,18)0,125 (3,18)0,125 (3,18)0,175 (4,45)0,175 (4,45)Removal dimensionsHandinstallation toolpart-no.DrillØinch (mm)Depthinch 99(5,05)1/8(3,18)AlcoaFasteningSystemsC-1
KNJ SeriesDimensionsPart-no.Standard type“S“Locking type“L“KN1032JThread AØAclass 3BThread BØBclass 2A L518JShearengagementinch² (mm²)0,1517 (97,9)0,0945 (60,9)0,1517 (97,9)0,0945 (61,0)0,2371 (153,0)0,1726 (111,4)0,2371 (153,0)0,1726 (111,4)0,3049 (196,7)0,2321 (149,7)0,3049 (196,7)0,2321 (149,7)Installation C-2ØDØEmodified countersink Øtap drill Ø inch 0,01(mm)inchThread FØFclass 2BG min.inch (mm)Cinch (mm)C1inch (mm)0,31 (7,87)0,31 (7,87)0,31 (7,87)0,31 (7,87)0,37 (9,40)0,33 (8,38)0,37 (9,40)0,36 (9,14)0,43 (10,9)0,43 (10,9)0,34 (8,64)0,37 (9,40)Removal dimensionsHandinstallation toolpart-no.DrillØinch (mm)Depthinch coaFasteningSystemsRelease June 2014
KNJ SeriesDimensionsPart-no.Standard type“S“Locking KN714JKNL714JKN820JKNL820JKN813JKNL813JThread AØAclass 3BThread BØBclass 2A � (mm²)0,4299 (277,4)0,3366 (217,2)0,4299 (277,4)0,3366 (217,2)0,5665 (365,5)0,4606 (297,2)0,5665 (365,5)0,4606 (297,2)0,7175 (462,9)0,5906 (381,0)0,7175 (462,9)0,5906 (381,0)Installation ase June 2014ØDØEmodified countersink Øtap drill Ø inch 0,01(mm)inchThread FØFclass 2BG min.inch (mm)Cinch (mm)C1inch (mm)0,50 (12,7)0,50 (12,7)0,56 (14,2)0,56 (14,2)0,62 (15,6)0,62 (15,6)0,36 (9,14)0,40 (10,16)0,41 (10,41)0,45 (11,43)0,42 (10,67)0,47 (11,94)Removal dimensionsHandinstallation toolpart-no.DrillØinch (mm)Depthinch 3,49)3/16(4,76)AlcoaFasteningSystemsC-3
KNHJ SeriesSDimensionsPart-no.Standard type“S“Locking 8JKNHL428JKNH420JKNHL420JKNH524JKNHL524JThread AØAclass 3BThread BØBclass 2A 145/16-241/2-13Shearengagementinch² (mm²)0,1901 (122,7)0,1156 (74,6)0,1901 (122,7)0,1156 (74,6)0,2842 (183,4)0,1970 (127,1)0,2842 (183,4)0,1970 (127,1)0,3588 (231,5)0,2608 (168,3)Installation ØDØEmodified countersink Øtap drill Ø inch 0,01(mm)inchThread FØFclassUNC-2BG min.inch (mm)Cinch (mm)C1inch (mm)0,31 (7,87)0,31 (7,87)0,37 (9,40)0,37 (9,40)0,43 (10,9)0,31 (7,87)0,31 (7,87)0,33 (8,38)0,33 (8,38)0,34 (8,64)Removal dimensionsHandinstallation toolpart-no.DrillØinch (mm)Depthinch ingSystemsRelease June 2014
KNHJ SeriesSDimensionsPart-no.Standard type“S“Locking HL616JKNH720JKNHL720JKNH714JKNHL714JThread AØAclass 3BThread BØBclass 2A 5/8-117/16-145/8-11Shearengagementinch² (mm²)0,3588 (231,5)0,2608 (168,3)0,4975 (321,0)0,3843 (248,0)0,4975 (321,0)0,3843 (248,0)0,7172 (462,7)0,5831 (376,2)0,7172 (462,7)0,5831 (376,2)Installation H616JKNHL616JKNH720JKNHL720JKNH714LKNHL714LRelease June 2014ØDØEmodified countersink Øtap drill Ø inch 0,01(mm)inchThread FØFclassUNC-2BG min.inch (mm)Cinch (mm)C1inch (mm)0,43 (10,9)0,50 (12,7)0,50 (12,7)0,62 (15,8)0,62 (15,8)0,37 (9,40)0,37 (9,40)0,41 (10,41)0,42 (10,67)0,46 (11,68)Removal dimensionsHandinstallation toolpart-no.DrillØinch (mm)Depthinch 76)AlcoaFasteningSystemsC-5
KNHJ SeriesPart-no.Standard type“S“Locking 1011JThread AØAclass 3BThread BØBclass 2A ementinch² (mm²)0,8884 (573,2)0,7368 (475,4)0,8884 (573,2)0,7368 (475,4)1,2493 (806,0)1,0247 (661,1)1,2493 (806,0)1,0247 (661,1)1,4866 (959,1)1,2415 (801,0)1,4866 (959,1)1,2415 (801,0)Installation 11JKNHL1011JC-6ØDØEmodified countersink Øtap drill Ø inch 0,01(mm)inchThread FØFclassUNC-2BG min.inch (mm)Cinch (mm)C1inch (mm)0,68 (17,3)0,68 (17,3)0,81 (20,6)0,81 (20,6)0,87 (22,1)0,87 (22,1)0,42 (10,67)0,47 (11,94)0,48 (12,19)0,54 (13,72)0,49 (12,47)0,57 (14,48)Removal dimensionsHandinstallation toolpart-no.DrillØinch (mm)Depthinch 8-14 asteningSystemsRelease June 2014
KNHJ SeriesDimensionsPart-no.Standard type“S“Locking 608JKNHL1608JThread AØAclass 3BThread BØBclass 2A ² (mm²)2,4901 (1606,5)2,4478 (1579,3)2,4901 (1606,5)2,4478 (1579,3)3,1370 (2024,1)3,0775 (1985,6)3,1370 (2024,1)3,0775 (1985,6)3,8381 (2476,3)3,7929 (2447,2)3,8381 (2476,3)3,7929 (2447,2)Installation 12JKNH1608JKNHL1608JRelease June 2014ØDØEmodified countersink Øtap drill Ø inch 0,01(mm)inchThread FØFclassUNC- 2BG min.inch (mm)Cinch (mm)C1inch (mm)1,12 (28,5)1,25 (31,8)0,68 (17,27)1,12 (28,5)1,25 (31,8)0,75 (19,05)1,25 (31,8)1,37 (34,8)0,69 (17,53)1,25 (31,8)1,37 (34,8)0,77 (19,56)1,37 (34,8)1,50 (38,1)0,78 (19,81)1,37 (34,8)1,50 (38,1)0,86 (21,84)Removal dimensionsHandinstallation toolpart-no.DrillØinch (mm)Depthinch (mm)1,062(26,97)1,145(29,08)1-1/8-12 UNF1,31 (33,27)1,44 ,145(29,08)1-1/8-12 UNF1,31 (33,27)1,44 ,270(32,26)1-1/4-12 UNF1,44 (36,58)1,56 1,270(32,26)1-1/4-12 UNF1,44 (36,58)1,56 1,395(35,43)1-3/8-12 UNF1,56 (39,62)1,68 1,395(35,43)1-3/8-12 UNF1,56 (39,62)1,68 ngSystemsC-7
KNHXHJ SeriesDimensionsPart-no.Standard type“S“Locking KNHXHL524JThread AØAclass 3BThread BØBclass 2A 135/16-249/16-12Shearengagementinch² (mm²)0,2299 (148,3)0,1403 (90,5)0,2299 (148,3)0,1403 (90,5)0,2997 (193,4)0,2005 (129,4)0,2997 (193,4)0,2005 (129,4)0,4163 (268,6)0,3029 (195,4)Installation HXH524JKNHXHL524JC-8ØDØEmodified countersink Øtap drill Ø inch 0,01(mm)inchThread FØFclassUNC- 2BG min.inch (mm)Cinch (mm)C1inch (mm)0,31 (7,9)0,31 (7,90)0,31 (7,9)0,31 (7,90)0,37 (9,4)0,33 (8,38)0,37 (9,4)0,36 (9,14)0,43 (10,9)0,34 (8,64)Removal dimensionsHandinstallation toolpart-no.DrillØinch (mm)Depthinch 1,91)3/16(4,76)AlcoaFasteningSystemsRelease June 2014
KNHXHJ SeriesDimensionsPart-no.Standard type“S“Locking HL714JThread AØAclass 3BThread BØBclass 2A 1/16-11 NS7/16-1411/16-11 NSShearengagementinch² (mm²)0,4163 (268,6)0,3029 (195,4)0,5584 (360,3)0,4234 (273,8)0,5584 (360,3)0,4234 (273,8)0,8000 (516,1)0,6498 (419,2)0,8000 (516,1)0,6498 (419,2)Installation 14JKNHXHL714JRelease June 2014ØDØEmodified countersink Øtap drill Ø inch 0,01(mm)inchThread FØFclassUNC- 2BG min.inch (mm)Cinch (mm)C1inch (mm)0,43 (10,9)0,50 (12,7)0,50 (12,7)0,62 (15,6)0,62 (15,6)0,37 (9,40)0,37 (9,40)0,41 (10,41)0,42 (10,67)0,46 (11,68)Removal dimensionsHandinstallation toolpart-no.DrillØinch (mm)Depthinch -11 16,28)0,700(17,80)11/16-11 asteningSystemsC-9
KNHXHJ SeriesDimensionsPart-no.Standard type“S“Locking XHL1018JKNHXH1011JKNHXHL1011JThread AØAclass 3BThread BØBclass 2A 127/8-145/8-181-125/8-111-12Shearengagementinch² (mm²)1,0293 (664,1)0,8642 (557,6)1,0293 (664,1)0,8642 (557,6)1,3761 (887,8)1,1131 (718,1)1,3761 (887,8)1,1131 (718,1)1,6420 (1059,4)1,2770 (823,9)1,6420 (1059,4)1,2770 (823,9)Installation fied countersink Øtap drill Ø inch 0,01(mm)inchThread FØFclassUNC-2BG min.inch (mm)Cinch (mm)C1inch (mm)0,68 (17,3)0,68 (17,3)0,81 (20,6)0,81 (20,6)0,87 (22,1)0,87 (22,1)0,42 (10,67)0,47 (11,94)0,48 (12,19)0,54 (13,72)0,51 (12,95)0,59 (14,99)Removal dimensionsHandinstallation toolpart-no.DrillØinch (mm)Depthinch 16(4,76)0,828(21,03)0,885(22,48)7/8-14 (21,03)0,885(22,48)7/8-14 (23,80)1,020(25,91)1-12 7(23,80)1,020(25,91)1-12 aFasteningSystemsRelease June 2014
KNHXHJ SeriesPart-no.Standard type“S“Locking 1612JKNHXHL1612JKNHXH1608JKNHXHL1608JThread AØAclass 3BThread BØBclass 2A h² (mm²)2,7966 (1804,2)2,5505 (1645,5)2,7966 (1804,2)2,5505 (1645,5)3,4652 (2235,6)3,2769 (2114,1)3,4652 (2235,6)3,2769 (2114,1)4,2374 (2733,8)4,2135 (2718,4)4,2374 (2733,8)4,2135 (2718,4)Installation se June 2014ØDØEmodified countersink Øtap drill Ø inch 0,01(mm)inchThread FØFclassUNC-2BG min.inch (mm)Cinch (mm)C1inch (mm)1,12 (28,5)1,25 (31,8)0,57 (14,48)1,12 (28,5)1,25 (31,8)0,64 (16,26)1,25 (31,8)1,37 (34,8)0,63 (16,00)1,25 (31,8)1,37 (34,8)0,71 (18,03)1,37 (34,8)1,50 (38,1)0,70 (17,78)1,37 (34,8)1,50 (38,1)0,78 (19,81)Removal dimensionsHandinstallation toolpart-no.DrillØinch (mm)Depthinch (mm)1,187(30,15)1,270(32,26)1-1/4-12 UNF1,31 (33,27)1,44 5)1,270(32,26)1-1/4-12 UNF1,31 (33,27)1,44 2)1,395(35,43)1-3/8-12 UNF1,44 (36,58)1,56 2)1,395(35,43)1-3/8-12 UNF1,44 (36,58)1,56 0)1,520(38,61)1-1/2-12 UNF1,56 (39,62)1.38 50)1,520(38,61)1-1/2-12 UNF1,56 (39,62)1.38 Co Intl. bvba, Industrieweg2, B-9200 Dendermonde BelgiumFasteningTel.: 32 (0)52 203923 Fax: 32 (0)52 219524SystemsWeb : http://www.mefaco-intl.com; E-mail : info@mefaco-intl.comC-11
Alcoa Release June 2014 Fastening Systems General Information A-2 The Camloc brand was established in 1937. Since that time our fastening systems have been successfully integrated into numerous applications within many different industries.File Size: 824KB
Release February 2008 Alcoa Fastening Systems Alcoa Fastening Systems General Information A-2 The Camloc brand was established in 1937. Since that time our fastening systems have been successfully integrated int
PELLISSIPPI PARKWAY SR-33 to SR-73 / US-321 NEW CONSTRUCTION City of Alcoa (865) 380-4800 11 ALCOA ALCOA PARKWAY Hall Road / US-129 Bypass to Singleton Station Road CONTROLLED ACCESS HIGHWAY City of Alcoa (865) 380-4800 12 ALCOA ALCOA HIGHWAY From Airport Interchange to Singleton Station Road MISC. LANE IMPROVEMENTS Phase I 2005
Release February 2008 Alcoa Fastening Systems Alcoa Fastening Systems 5F Series B-1 Particular Features Max. tensile strength 670 N. Plastic washer stud assembly to protect decorative surfaces. Spring l
Behind every Alcoa Fastening Systems & Rings brand is a powerful commitment to providing you the strongest, most reliable fastening solution available, regardless of industry. Our uncompromising approach to engineering, manufacturing quality, and breadth and depth of products is unmatched; re
Arconic Fastening Systems, formerly Alcoa Fastening Systems & Rings, is a global leader in fastening technology. Offering the greatest breadth and depth of fastening system solutions in the industry, Arconic continues to reflect the same commitment to produc
Release February 2008 Alcoa Fastening Systems A-3 Alcoa Fastening Systems Advantages of the Camloc 1/4-Turn Fastener Safe mechanical quick release fastener systems Locking or unlocking by quarter turn Long life - high number of operating cycles Hand or tool-operated Service-friendly, time-saving and cost cutting Cam
Alcoa Fastening Systems & Rings use quiet, non-torque tools for lower noise in the plant. And health risks are reduced because operator muscles and joints are not subjected to the constant torque of power tools. Strong support. Alcoa Fastening Systems & Rings' skilled and knowledgeable tech
ANSI A300 (Part 6)-2005 Transplanting, ANSI Z60.1- 2004 critical root zone: The minimum volume of roots necessary for maintenance of tree health and stability. ANSI A300 (Part 5)-2005 Management . development impacts: Site development and building construction related actions that damage trees directly, such as severing roots and branches or indirectly, such as soil compaction. ANSI A300 (Part .
