Attachment 3. Technical Codes And Standards For The PNG .
Environmental Impact StatementPNG LNG ProjectAttachment 3. Technical Codes and Standards for the PNGLNG ProjectPart 1This first of three lists of industry standards is representative of the industry codes and standards to be used on theUpstream PNG LNG Project. As detailed design progresses, further codes and standards may be used.NumberDescription29 CFR 1910Air-Cooled Heat Exchangers29 CFR 1910 Subpart DAir-Cooled Heat Exchangers29 CFR 1910 Subpart OAir-Cooled Heat Exchangers29 CFR 1910.119Upstream Positive Materials Identification29 CFR 1910.144Thermal Arc Sprayed Metallic Coatings29 CFR 1910.21Air-Cooled Heat Exchangers29 CFR 1910.211Air-Cooled Heat Exchangers29 CFR 1910.212Air-Cooled Heat Exchangers29 CFR 1910.219Air-Cooled Heat Exchangers29 CFR 1910.22Air-Cooled Heat Exchangers29 CFR 1910.23Air-Cooled Heat Exchangers29 CFR 1910.27Air-Cooled Heat Exchangers29 CFR 1910-ZTransport Rigging and Erection of Equipment and Vessels29 CFR 1926Transport Rigging and Erection of Equipment and Vessels40 CFR 61-VControl Valves49 CFR 452Export Packing Requirements for Materials49 CFR 453Export Packing Requirements for MaterialsAASHTO T166Tank FoundationsABS 2 Part 4Axial and Centrifugal Compressors for Heavy Duty ServicesABS 82Packaged Gas TurbinesACI 304ROffshore Pipeline Weight Coating and Anode InstallationACI 308.1Offshore Pipeline Weight Coating and Anode InstallationACI 506.2Offshore Pipeline Weight Coating and Anode InstallationAFNOR NF A49-711Corrosion Protection - Three Layer Polyethylene and Polypropylene CoatingsAG-163Packaged Unit InstrumentationAG-181Field bus and Control NetworksAG-181Packaged Unit InstrumentationAGA Report No. 10Volumetric Measurement of Natural Gas and Other GasesAGA Report No. 11Production MeteringAGA Report No. 11Volumetric Measurement of Natural Gas and Other GasesAGA Report No. 12Volumetric Measurement of Natural Gas and Other GasesAGA Report No. 7Production MeteringAGA Report No. 8Production MeteringCoffey Natural SystemsAttachment 3 Rev0 v3.doc1PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAGA Report No. 8Volumetric Measurement of Natural Gas and Other GasesAGA Report No. 9Production MeteringAGA Report No. 9Volumetric Measurement of Natural Gas and Other GasesAISC 13th EditionBlast Resistant BuildingAISC M016Internals for Towers Drums and Fixed Bed Molecular Sieve VesselsAISC S335Blast Resistant BuildingAISC S335Steel StacksALPEMA StandardsBrazed Aluminium Heat ExchangersAnnex 14 Volume 1Aviation Operations SpecificationAnnex 14 Volume 2Aviation Operations SpecificationANSI B30.16Overhead Cranes - General RequirementsANSI Z97.1Plant Buildings for OperationsANSI Z97.1Shelters for Process AnalysersANSI/FCI 70-2Testing of Control Valves in Cryogenic ServiceANSI/ISA-RP 12.06.01Instrument Wire and CableAPI 500Diesel SystemsAPI 530Waste Heat Recovery UnitAPI 560Waste Heat Recovery UnitAPI 598Packaged Unit InstrumentationAPI 613Rotary Screw CompressorsAPI 614Rotary Screw CompressorsAPI 671Reciprocating Process CompressorsAPI 677Reciprocating Process CompressorsAPI 6DPackaged Unit InstrumentationAPI MPMSVolumetric Measurement of Natural Gas and Other GasesAPI MPMS 12.2Flow InstrumentsAPI MPMS 14.1Production MeteringAPI MPMS 14.1Volumetric Measurement of Natural Gas and Other GasesAPI MPMS 14.2Volumetric Measurement of Natural Gas and Other GasesAPI MPMS 14.3Volumetric Measurement of Natural Gas and Other GasesAPI MPMS 14.3.2Flow InstrumentsAPI MPMS 14.3.3Flow InstrumentsAPI MPMS 14.5Volumetric Measurement of Natural Gas and Other GasesAPI MPMS 14.9Volumetric Measurement of Natural Gas and Other GasesAPI MPMS 20.1Production MeteringAPI MPMS 21.1Production MeteringAPI MPMS 21.1Volumetric Measurement of Natural Gas and Other GasesAPI MPMS 21.2Production MeteringAPI MPMS 3.1BInstruments for Storage Tanks and VesselsCoffey Natural SystemsAttachment 3 Rev0 v3.doc2PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAPI MPMS 4.1Flow InstrumentsAPI MPMS 4.1Production MeteringAPI MPMS 4.2Flow InstrumentsAPI MPMS 4.2Production MeteringAPI MPMS 4.3Flow InstrumentsAPI MPMS 4.3Production MeteringAPI MPMS 4.4Flow InstrumentsAPI MPMS 4.4Production MeteringAPI MPMS 4.5Flow InstrumentsAPI MPMS 4.5Production MeteringAPI MPMS 4.6Flow InstrumentsAPI MPMS 4.6Production MeteringAPI MPMS 4.7Flow InstrumentsAPI MPMS 4.7Production MeteringAPI MPMS 4.8Flow InstrumentsAPI MPMS 4.8Production MeteringAPI MPMS 5.2Flow InstrumentsAPI MPMS 5.3Flow InstrumentsAPI MPMS 5.4Flow InstrumentsAPI MPMS 5.5Flow InstrumentsAPI MPMS 6.2Flow InstrumentsAPI MPMS 6.4Flow InstrumentsAPI MPMS 6.5Flow InstrumentsAPI MPMS 6.6Flow InstrumentsAPI MPMS 6.7Flow InstrumentsAPI MPMS 7Instruments for Storage Tanks and VesselsAPI MPMS 7Volumetric Measurement of Natural Gas and Other GasesAPI MPMS 7.2Temperature InstrumentsAPI MPMS 8.2Production MeteringAPI RP 1130Onshore Pipeline DesignAPI RP 14CHigh Integrity Pressure Protection Systems (HIPPS)API RP 14CFire and Gas Detection SystemsAPI RP 14GFire and Gas Detection SystemsAPI RP 2003Atmospheric Storage TanksAPI RP 2003Diesel SystemsAPI RP 2AShore Approach ConstructionAPI RP 2A-WSDAxial and Centrifugal Compressors for Heavy Duty ServicesAPI RP 2A-WSDOffshore Structural Welding and InspectionAPI RP 2XOffshore Structural Welding and InspectionCoffey Natural SystemsAttachment 3 Rev0 v3.doc3PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAPI RP 2ZOffshore Structural Welding and InspectionAPI RP 500Plant Buildings for OperationsAPI RP 500Packaged Gas TurbinesAPI RP 505Control CentresAPI RP 505Area Classification and Related Electrical Design for Flammable Liquids Gases Or VapoursAPI RP 520 PT IHIPPSAPI RP 521HIPPSAPI RP 531MFacility Noise Design CriteriaAPI RP 551Instrumentation for Fired HeatersAPI RP 551Instruments for Storage Tanks and VesselsAPI RP 551Temperature InstrumentsAPI RP 551Pressure InstrumentsAPI RP 551Flow InstrumentsAPI RP 551Level InstrumentsAPI RP 553Electric Motor Operators for ValvesAPI RP 554Instrument Control PanelsAPI RP 555Process AnalysersAPI RP 555Sample Transport and Sample Conditioning Systems for Process Stream AnalysersAPI RP 5L1Preservation and Protection During Shipping and ConstructionAPI RP 5L1Procedure for Long-Term Tropical Preservation of Operational SparesAPI RP 5L1Offshore Pipeline Weight Coating and Anode InstallationAPI RP 5L1Handling, Transportation, Storage and Repair of Line PipeAPI RP 5L2Corrosion Protection - Fusion Bonded Epoxy Coating for Offshore PipelinesAPI RP 5LWPreservation and Protection During Shipping and ConstructionAPI RP 5LWProcedure for Long-Term Tropical Preservation of Operational SparesAPI RP 5LWOffshore Pipeline Weight Coating and Anode InstallationAPI RP 5LWHandling, Transportation, Storage and Repair of Line PipeAPI RP 686Installation of Rotating EquipmentAPI RP 500BLow Voltage AC MotorsAPI RP 520Packaged Unit InstrumentationAPI RP 521Packaged Unit InstrumentationAPI RP 551Packaged Unit InstrumentationAPI RP 552Packaged Unit InstrumentationAPI RP 554Packaged Unit InstrumentationAPI SPEC 12JOil and Gas SeparatorsAPI SPEC 2BOffshore Structural Welding and InspectionAPI SPEC 5LAtmospheric Storage TanksAPI SPEC 5LSample Transport and Sample Conditioning Systems for Process Stream AnalysersAPI SPEC 5LUpstream Induction Bending of PipeCoffey Natural SystemsAttachment 3 Rev0 v3.doc4PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAPI SPEC 5LUpstream Cold Bending of PipeAPI SPEC 5LOnshore Pipeline DesignAPI SPEC 5LVolumetric Measurement of Natural Gas and Other GasesAPI SPEC 5LUpstream Induction Bending of PipeAPI SPEC 5LHandling, Transportation, Storage and Repair of Line PipeAPI SPEC 5LCUpstream Induction Bending of PipeAPI SPEC 5LCUpstream Cold Bending of PipeAPI SPEC 5LCUpstream Induction Bending of PipeAPI SPEC 6DProtective SystemsAPI SPEC 6DOnshore Pipeline DesignAPI SPEC 6D- Pigging SystemsAPI SPEC 6H- Pigging SystemsAPI STD 1104Volumetric Measurement of Natural Gas and Other GasesAPI STD 1164Control Systems and Equipment Management System Security ImplementationAPI STD 2000Atmospheric Storage TanksAPI STD 530Upstream Fired Heaters - Design and FabricationAPI STD 541Centrifugal Pumps for Non-hydrocarbon Plant ServicesAPI STD 541Rotary Screw CompressorsAPI STD 541Axial and Centrifugal Compressors for Heavy Duty ServicesAPI STD 541High Voltage AC MotorsAPI STD 546High Voltage AC MotorsAPI STD 560Upstream Fired Heaters - Design and FabricationAPI STD 560Burners for Fired HeatersAPI STD 598Protective SystemsAPI STD 607Protective SystemsAPI STD 609Control ValvesAPI STD 610-8Centrifugal Pumps for Heavy Duty ServicesAPI STD 610-8Centrifugal Fire PumpsAPI STD 613Packaged Gas TurbinesAPI STD 613Axial and Centrifugal Compressors for Heavy Duty ServicesAPI STD 613-4Special Purpose Gear UnitsAPI STD 614Centrifugal Pumps for Non-hydrocarbon Plant ServicesAPI STD 614Packaged Gas TurbinesAPI STD 614-5Lubrication Shaft-Sealing and Oil Control Systems and AuxiliariesAPI STD 614-5Axial and Centrifugal Compressors for Heavy Duty ServicesAPI STD 616Packaged Gas TurbinesAPI STD 616-4Axial and Centrifugal Compressors for Heavy Duty ServicesAPI STD 617Packaged Gas TurbinesAPI STD 617-7Axial and Centrifugal Compressors for Heavy Duty ServicesAPI STD 618-4Reciprocating Process CompressorsCoffey Natural SystemsAttachment 3 Rev0 v3.doc5PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAPI STD 619-3Rotary Screw CompressorsAPI STD 620Pressure VesselsAPI STD 650Atmospheric Storage TanksAPI STD 650Tank FoundationsAPI STD 650, App. BTank FoundationsAPI STD 650, App. ETank FoundationsAPI STD 650, App. ITank FoundationsAPI STD 660TEMA Type Shell-and-Tube Heat ExchangersAPI STD 661Facility Noise Design CriteriaAPI STD 661Reciprocating Process CompressorsAPI STD 661/ISO 13706Air-Cooled Heat ExchangersAPI STD 662 PART 2-1/ISO 15547-21Brazed Aluminium Heat ExchangersAPI STD 670Rotary Screw CompressorsAPI STD 670Packaged Gas TurbinesAPI STD 670Axial and Centrifugal Compressors for Heavy Duty ServicesAPI STD 670-3Vibration Axial Position and Bearing Temperature Monitoring Systems for Compressors andDriversAPI STD 671Centrifugal Pumps for Heavy Duty ServicesAPI STD 671Centrifugal Pumps for Non-hydrocarbon Plant ServicesAPI STD 671Rotary Screw CompressorsAPI STD 671Packaged Gas TurbinesAPI STD 671General Purpose Gear UnitsAPI STD 671Sizing of Drivers and Transmission for Compressors Fans and PumpsAPI STD 671Axial and Centrifugal Compressors for Heavy Duty ServicesAPI STD 671Special Purpose Couplings for Process ServicesAPI STD 674-2Upstream Positive Displacement Pumps - ReciprocatingAPI STD 675-2Positive Displacement Pumps - Controlled VolumeAPI STD 676-2Positive Displacement Pumps - RotaryAPI STD 677Centrifugal Fire PumpsAPI STD 677-2Centrifugal Pumps for Heavy Duty ServicesAPI STD 677-2Positive Displacement Pumps - RotaryAPI STD 677-2General Purpose Gear UnitsAPI STD 677-3Centrifugal Pumps for Non-hydrocarbon Plant ServicesAPI STD 682Centrifugal Pumps for Heavy Duty ServicesAPI STD 682-1Shaft Sealing Systems for Centrifugal and Rotary PumpsAPI STD 686Rotary Screw CompressorsAS 1012Piled FoundationsAS 1012Concrete Mattress and Grout Bag Supply and InstallationAS 1012Concrete Mattress and Grout Bag Supply and InstallationAS 1021Heating Ventilation Air Conditioning (HVAC) SystemsCoffey Natural SystemsAttachment 3 Rev0 v3.doc6PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAS 1028Power TransformersAS 1081 (All Parts)Low Voltage AC MotorsAS 1081 (All Parts)High Voltage AC MotorsAS 1100Piled FoundationsAS 1100Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 1141Piled FoundationsAS 1141Site Preparation and EarthworksAS 1141Installation of Corrugated Steel Drainage Structures and Protection WorksAS 1141Installation of Gabions and Reno MattressesAS 1141Roads and BridgesAS 1163Piled FoundationsAS 1170Plant Buildings for OperationsAS 1170Blast Resistant BuildingAS 1170Warehouse BuildingAS 1170Steel StacksAS 1170Piled FoundationsAS 1170Installation of Gabions and Reno MattressesAS 1170Waste Heat Recovery UnitAS 1170Substation LayoutAS 1170Permanent Operations Rotator Housing CommunityAS 1170Transport Rigging and Erection of Equipment and VesselsAS 1170.0HVAC SystemsAS 1170.1HVAC SystemsAS 1170.2HVAC SystemsAS 1170.4HVAC SystemsAS 1171Piled FoundationsAS 1171Upstream Cold Bending of PipeAS 1210Pressure Testing of Unfired Pressure VesselsAS 1210Sample Transport and Sample Conditioning Systems for Process Stream AnalysersAS 1210Transport Rigging and Erection of Equipment and VesselsAS 1210- Pigging SystemsAS 1210 Supp 1Transport Rigging and Erection of Equipment and VesselsAS 1265Power TransformersAS 1289Site Preparation and EarthworksAS 1289Installation of Corrugated Steel Drainage Structures and Protection WorksAS 1289Installation of Gabions and Reno MattressesAS 1289Roads and BridgesAS 1289 Part 3.3.1Site Preparation and EarthworksAS 1289 Part 3.6.1Site Preparation and EarthworksCoffey Natural SystemsAttachment 3 Rev0 v3.doc7PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAS 1289 Part 4.8.1Site Preparation and EarthworksAS 1289 Part 5.1.1Site Preparation and EarthworksAS 1289 Part 5.3Site Preparation and EarthworksAS 1289 Part 5.5Site Preparation and EarthworksAS 1289 Part 5.6.1Site Preparation and EarthworksAS 1324Substation LayoutAS 1324HVAC SystemsAS 1353.2Transport Rigging and Erection of Equipment and VesselsAS 1359Centrifugal Pumps for Non-hydrocarbon Plant ServicesAS 1359Positive Displacement Pumps - RotaryAS 1359Protective SystemsAS 1359Motor ApplicationAS 1359Low Voltage AC MotorsAS 1359High Voltage AC MotorsAS 1359Generator Sizing CriteriaAS 1359Specification for Electrical Requirement for BuildingsAS 1360.11Motor ApplicationAS 1360.11Low Voltage AC MotorsAS 1360.11High Voltage AC MotorsAS 1379Piled FoundationsAS 1379Concrete Mattress and Grout Bag Supply and InstallationAS 1379Concrete Mattress and Grout Bag Supply and InstallationAS 1397Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 1397HVAC) SystemsAS 1418Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 1418Overhead Cranes - General RequirementsAS 1418Transport Rigging and Erection of Equipment and VesselsAS 1418.1Transport Rigging and Erection of Equipment and VesselsAS 1418.4Transport Rigging and Erection of Equipment and VesselsAS 1418.5Transport Rigging and Erection of Equipment and VesselsAS 1432HVAC SystemsAS 1478Piled FoundationsAS 1478Concrete Mattress and Grout Bag Supply and InstallationAS 1478Concrete Mattress and Grout Bag Supply and InstallationAS 1530Substation LayoutAS 1530HVAC SystemsAS 1553Piled FoundationsAS 1554Piled FoundationsAS 1554Waste Heat Recovery UnitCoffey Natural SystemsAttachment 3 Rev0 v3.doc8PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAS 1554Substation LayoutAS 1554HVAC SystemsAS 1554Overhead Cranes - General RequirementsAS 1571HVAC SystemsAS 1579Piled FoundationsAS 1603Substation LayoutAS 1603HVAC SystemsAS 1627Piled FoundationsAS 1627Power TransformersAS 1627.4Offshore Pipeline Weight Coating and Anode InstallationAS 1654High Voltage AC MotorsAS 1657Blast Resistant BuildingAS 1657Substation LayoutAS 1657Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 1666.2Transport Rigging and Erection of Equipment and VesselsAS 1668Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 1668.1HVAC SystemsAS 1668.2HVAC SystemsAS 1670Fire and Gas Detection SystemsAS 1680Substation LayoutAS 1680Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 1680HVAC SystemsAS 1682.1Substation LayoutAS 1682.1Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 1682.1HVAC SystemsAS 1726Site Preparation and EarthworksAS 1726Installation of Gabions and Reno MattressesAS 1742Roads and BridgesAS 1743Roads and BridgesAS 1767.1Power TransformersAS 1768Earthing and Over-voltage ProtectionAS 1768Permanent Operations Rotator Housing CommunityAS 1796Piled FoundationsAS 1824-1Power TransformersAS 1824-2Power TransformersAS 1861.2Substation LayoutAS 1861.2HVAC SystemsAS 1905Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 1905.1HVAC SystemsAS 1939 (Superseded by AS 60529)Motor ApplicationCoffey Natural SystemsAttachment 3 Rev0 v3.doc9PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAS 1939 (Superseded by AS 60529)Low Voltage AC MotorsAS 1939 (Superseded by AS 60529)High Voltage AC MotorsAS 1940Instrument Transmission SystemsAS 2041Installation of Corrugated Steel Drainage Structures and Protection WorksAS 2053HVAC SystemsAS 2062Upstream Cold Bending of PipeAS 2067Power TransformersAS 2159Piled FoundationsAS 2177Piled FoundationsAS 2177.1Upstream Cold Bending of PipeAS 2187Blasting for ExcavationsAS 2205.5.1Upstream Cold Bending of PipeAS 2205.6.1Upstream Cold Bending of PipeAS 2205.7.1Upstream Cold Bending of PipeAS 2207Piled FoundationsAS 2207Upstream Cold Bending of PipeAS 2214Piled FoundationsAS 2239Directional BoringAS 2293Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 2349Piled FoundationsAS 2350Piled FoundationsAS 2374Power TransformersAS 2374.6-1994Facility Noise Design CriteriaAS 2380.4Control CentresAS 2380.4Area Classification and Related Electrical Design for Flammable Liquids Gases Or VapoursAS 2381Centrifugal Pumps for Non-hydrocarbon Plant ServicesAS 2381Positive Displacement Pumps - RotaryAS 2381.1Centrifugal Pumps for Heavy Duty ServicesAS 2395Power TransformersAS 2419Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 2430.1Centrifugal Fire PumpsAS 2430.1Rotary Screw CompressorsAS 2444Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 2550Transport Rigging and Erection of Equipment and VesselsAS 2550.1Transport Rigging and Erection of Equipment and VesselsAS 2550.4Transport Rigging and Erection of Equipment and VesselsAS 2550.5Transport Rigging and Erection of Equipment and VesselsAS 2566.2Onshore Pipeline InstallationAS 2625Low Voltage AC MotorsCoffey Natural SystemsAttachment 3 Rev0 v3.doc10PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAS 2625High Voltage AC MotorsAS 2676.2HVAC SystemsAS 2700Low Voltage AC MotorsAS 2700High Voltage AC MotorsAS 2700Power TransformersAS 2729Low Voltage AC MotorsAS 2729High Voltage AC MotorsAS 2735Power TransformersAS 2758Piled FoundationsAS 2758Installation of Gabions and Reno MattressesAS 2758Concrete Mattress and Grout Bag Supply and InstallationAS 2758Concrete Mattress and Grout Bag Supply and InstallationAS 2768Motor ApplicationAS 2768Low Voltage AC MotorsAS 2768High Voltage AC MotorsAS 2832.1Rock Shield Coating for Onshore PipelinesAS 2885.1Upstream Cold Bending of PipeAS 2885.1Onshore Pipeline DesignAS 2885.1- Pigging SystemsAS 2885.1Onshore Pipeline InstallationAS 2885.1System Gauging, Hydrotesting and DisposalAS 2885.1Drying and PurgingAS 2885.1Directional BoringAS 2885.1-1997/Amdt 1-2001Shore Approach ConstructionAS 2885.2Onshore Pipeline DesignAS 2885.2- Pigging SystemsAS 2885.2Onshore Pipeline InstallationAS 2885.2Directional BoringAS 2885.3Onshore Pipeline DesignAS 2885.3Onshore Pipeline InstallationAS 2885.3Drying and PurgingAS 2885.3Directional BoringAS 2885.4Shore Approach ConstructionAS 2885.4Shallow Water Pipeline Construction and InstallationAS 2885.5Onshore Pipeline DesignAS 2885.5Onshore Pipeline InstallationAS 2885.5System Gauging, Hydrotesting and DisposalAS 2885.5Directional BoringAS 3000Centrifugal Pumps for Heavy Duty ServicesCoffey Natural SystemsAttachment 3 Rev0 v3.doc11PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAS 3000Centrifugal Pumps for Non-hydrocarbon Plant ServicesAS 3000Positive Displacement Pumps - RotaryAS 3000Upstream Positive Displacement Pumps - ReciprocatingAS 3000Electric Power Branch Circuit Design for InstrumentationAS 3000Sample Transport and Sample Conditioning Systems for Process Stream AnalysersAS 3000Field Bus and Control NetworksAS 3000Instrument Control PanelsAS 3000Control CentresAS 3000Protection of Electrical Equipment in Contaminated EnvironmentsAS 3000Low Voltage AC MotorsAS 3000High Voltage AC MotorsAS 3000Secondary Selective Substations with Residual Voltage Based Automatic TransferAS 3000Overhead Cranes - General RequirementsAS 3000Permanent Operations Rotator Housing CommunityAS 3010Generator Sizing CriteriaAS 3011.2Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 3011.2HVAC SystemsAS 3147HVAC SystemsAS 3500Permanent Operations Rotator Housing CommunityAS 3512Piled FoundationsAS 3600Plant Buildings for OperationsAS 3600Blast Resistant BuildingAS 3600Warehouse BuildingAS 3600Steel StacksAS 3600Piled FoundationsAS 3600Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 3600Permanent Operations Rotator Housing CommunityAS 3600Shore Approach ConstructionAS 3600Tank FoundationsAS 3635Instrumentation for Fired HeatersAS 3678Piled FoundationsAS 3679Piled FoundationsAS 3700Plant Buildings for OperationsAS 3700Blast Resistant BuildingAS 3700Warehouse BuildingAS 3700Steel StacksAS 3705Installation of Gabions and Reno MattressesAS 3705Roads and BridgesAS 3706Installation of Gabions and Reno MattressesCoffey Natural SystemsAttachment 3 Rev0 v3.doc12PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAS 3706Roads and BridgesAS 3709Low Voltage AC MotorsAS 3709High Voltage AC MotorsAS 3735Piled FoundationsAS 3775.2Transport Rigging and Erection of Equipment and VesselsAS 3814 (AG 501)Instrumentation for Fired HeatersAS 3814 (AG 501)Instrumentation for Fired HeatersAS 3850Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 3890Low Voltage AC MotorsAS 3890High Voltage AC MotorsAS 3947Power TransformersAS 3961Instruments for Storage Tanks and VesselsAS 3972Piled FoundationsAS 3972Concrete Mattress and Grout Bag Supply and InstallationAS 3972Concrete Mattress and Grout Bag Supply and InstallationAS 3990Piled FoundationsAS 3990Permanent Operations Rotator Housing CommunityAS 3998Upstream Cold Bending of PipeAS 4037Pressure Testing of Unfired Pressure VesselsAS 4037 – 1999Internals for Towers Drums and Fixed Bed Molecular Sieve VesselsAS 4100Plant Buildings for OperationsAS 4100Blast Resistant BuildingAS 4100Warehouse BuildingAS 4100Steel StacksAS 4100Piled FoundationsAS 4100Waste Heat Recovery UnitAS 4100Substation LayoutAS 4100Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 4100HVAC SystemsAS 4100Overhead Cranes - General RequirementsAS 4100Permanent Operations Rotator Housing CommunityAS 4142Concrete Mattress and Grout Bag Supply and InstallationAS 4142Concrete Mattress and Grout Bag Supply and InstallationAS 4143Concrete Mattress and Grout Bag Supply and InstallationAS 4143Concrete Mattress and Grout Bag Supply and InstallationAS 4254HVAC SystemsAS 4600Piled FoundationsAS 4600HVAC SystemsAS 4600Permanent Operations Rotator Housing CommunityCoffey Natural SystemsAttachment 3 Rev0 v3.doc13PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAS 4671Blast Resistant BuildingAS 4671Piled FoundationsAS 4678Installation of Gabions and Reno MattressesAS 4680Piled FoundationsAS 4680Installation of Gabions and Reno MattressesAS 4791Piled FoundationsAS 4792Piled FoundationsAS 4801Internal Combustion Diesel EnginesAS 4801HVAC SystemsAS 4991Transport Rigging and Erection of Equipment and VesselsAS 5100Roads and BridgesAS 60044.1Power TransformersAS 60068.2.27Environmental Protection for InstrumentationAS 60068.2.27Programmable Logic Controllers SpecificationAS 60068.2.31Environmental Protection for InstrumentationAS 60068.2.6Environmental Protection for InstrumentationAS 60068.2.6Programmable Logic Controllers SpecificationAS 60068.2.64Environmental Protection for InstrumentationAS 60068.2.64Programmable Logic Controllers SpecificationAS 60076Specification for Electrical Requirement for BuildingsAS 60079Internal Combustion Diesel EnginesAS 60079Area Classification and Related Electrical Design for Flammable Liquids Gases Or VapoursAS 60079.20Centrifugal Fire PumpsAS 60079.20Rotary Screw CompressorsAS 60079.20Packaged Gas TurbinesAS 60529Temperature InstrumentsAS 60529Electronic and Pneumatic InstrumentsAS 60529Environmental Protection for InstrumentationAS 60529Protective SystemsAS 60529Electric Motor Operators for ValvesAS 60529Actuators for On / Off ValvesAS 60529Instrument Transmission SystemsAS 60529Field Bus and Control NetworksAS 60529Instrument Control PanelsAS 60529Protection of Electrical Equipment in Contaminated EnvironmentsAS 60529Power TransformersAS 60529Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS 60529Specification for Electrical Requirement for BuildingsAS 61508.4Protective SystemsCoffey Natural SystemsAttachment 3 Rev0 v3.doc14PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAS 61508.5Protective SystemsAS 61508.6Protective SystemsAS 61508.7Protective SystemsAS IEC 61131.2Environmental Protection for InstrumentationAS IEC 61131.3Programmable Logic Controllers SpecificationAS IEC 61131.3Protective SystemsAS IEC 61131.3Packaged Unit InstrumentationAS IEC 61511.1Protective SystemsAS IEC 61511.1Packaged Unit InstrumentationAS IEC 61511.2Protective SystemsAS IEC 61511.2Packaged Unit InstrumentationAS IEC 61511.3Packaged Unit InstrumentationAS IEC 61672Facility Noise Design CriteriaAS 60529Packaged Unit InstrumentationAS/NZS 1020Earthing and Over-voltage ProtectionAS/NZS 1125Specification for Electrical Requirement for BuildingsAS/NZS 1170Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS/NZS 1200Instrumentation for Fired HeatersAS/NZS 1429.1Low Voltage CableAS/NZS 1429.1High Voltage Power Cable Rated 1 kV Through 36 kVAS/NZS 1660Specification for Electrical Requirement for BuildingsAS/NZS 1668Substation LayoutAS/NZS 1677.1HVAC SystemsAS/NZS 1677.2HVAC SystemsAS/NZS 1768Instrument Transmission SystemsAS/NZS 1905.Substation LayoutAS/NZS 2053Substation LayoutAS/NZS 2053Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS/NZS 2312Power TransformersAS/NZS 2373Instrument Wire and CableAS/NZS 2381Area Classification and Related Electrical Design for Flammable Liquids Gases Or VapoursAS/NZS 2381.1Rotary Screw CompressorsAS/NZS 2381.1Reciprocating Process CompressorsAS/NZS 2381.1Packaged Gas TurbinesAS/NZS 2381.1Internal Combustion Diesel EnginesAS/NZS 2381.1Axial and Centrifugal Compressors for Heavy Duty ServicesAS/NZS 2381.1Instrument Transmission SystemsAS/NZS 2381.1Packaged Unit InstrumentationAS/NZS 2381.1Low Voltage AC MotorsCoffey Natural SystemsAttachment 3 Rev0 v3.doc15PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAS/NZS 2381.1High Voltage AC MotorsAS/NZS 2381.1Diesel SystemsAS/NZS 2650Power TransformersAS/NZS 3000Waste Heat Recovery UnitAS/NZS 3000Centrifugal Fire PumpsAS/NZS 3000Rotary Screw CompressorsAS/NZS 3000Reciprocating Process CompressorsAS/NZS 3000Packaged Gas TurbinesAS/NZS 3000Lubrication Shaft-Sealing and Oil Control Systems and AuxiliariesAS/NZS 3000Internal Combustion Diesel EnginesAS/NZS 3000Axial and Centrifugal Compressors for Heavy Duty ServicesAS/NZS 3000Electric Motor Operators for ValvesAS/NZS 3000Actuators for On / Off ValvesAS/NZS 3000Instrument Transmission SystemsAS/NZS 3000Instrument Wire and CableAS/NZS 3000Packaged Unit InstrumentationAS/NZS 3000Area Classification and Related Electrical Design for Flammable Liquids Gases Or VapoursAS/NZS 3000Electrical Control and Management System (ECMS)AS/NZS 3000Earthing and Over-voltage ProtectionAS/NZS 3000Substation LayoutAS/NZS 3000Power TransformersAS/NZS 3000Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS/NZS 3000Specification for Electrical Requirement for BuildingsAS/NZS 3000HVAC SystemsAS/NZS 3000Diesel SystemsAS/NZS 3013Instrument Wire and CableAS/NZS 3123Specification for Electrical Requirement for BuildingsAS/NZS 3666.1HVAC SystemsAS/NZS 3808Specification for Electrical Requirement for BuildingsAS/NZS 3947.3Specification for Electrical Requirement for BuildingsAS/NZS 3947.4Specification for Electrical Requirement for BuildingsAS/NZS 3947.5.1Specification for Electrical Requirement for BuildingsAS/NZS 4507Instrument Wire and CableAS/NZS 4586Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS/NZS 4600Substation LayoutAS/NZS 4671Specification for Local Equipment Rooms and Motor Control Centre Transportable BuildingAS/NZS 4680Power TransformersAS/NZS 4791HVAC SystemsAS/NZS 4805Specification for Electrical Requirement for BuildingsAS/NZS 5000.1Instrument Wire and CableCoffey Natural SystemsAttachment 3 Rev0 v3.doc16PGGP-EN-SRENV-000001-001Rev0
Environmental Impact StatementPNG LNG ProjectNumberDescriptionAS/NZS 60079Motor ApplicationAS/NZS 60079Low Voltage AC MotorsAS/NZS 60079High Voltage AC MotorsAS/NZS 60079Specification for Electrical Requirement for BuildingsAS/NZS 60079.0Electronic and Pneumatic InstrumentsAS/NZS 60079.0Environmental Protection for InstrumentationAS/NZS 60079.0Electric Motor Operators for ValvesAS/NZS 60079.0Instrument Transmission SystemsAS/NZS 60079.0Instrument Con
API RP 2003 Diesel Systems API RP 2A Shore Approach Construction API RP 2A-WSD Axial and Centrifugal Compressors for Heavy Duty Services API RP 2A-WSD Offshore Structural Welding and Inspection API RP 2X Offshore Structural Weld
To: Metalogix International GmbH ( kathleen@ansarilaw.com ) Subject: U.S. TRADEMARK APPLICATION NO. 85255200 - METALOGIX - N/A Sent: 3/14/2013 12:13:23 PM Sent As: ECOM112@USPTO.GOV Attachments: Attachment - 1 Attachment - 2 Attachment - 3 Attachment - 4 Attachment - 5 Attachment - 6 Attachment - 7 Attachment - 8 Attachment - 9 Attachment - 10 .
BUDGET, FINANCE, AND INFRASTRUCTURE COMMITTEE March 23, 2022, TIME: 10:15 AM to 12:15 PM THE CAROLINA INN OPEN SESSION FOR ACTION Attachment A Attachment B . Attachment C . Attachment D Attachment E Attachment F Attachment G . Attachment H. 1. All-Funds Budget Model. Nathan Knuffman, Vice Chancellor for Finance and Operations 2.
Attachment 2: Principal Candidate Resume Attachment 3: School Administrator Resume Attachment 4: Governance Documents Attachment 5: Statement of Assurances Attachment 6: Board Members Information Attachment 7: Conflict of Interest Attachment 8: Scope and Sequence Attachment 9: Academic E
To: Metalogix International GmbH (kathleen@ansarilaw.com) Subject: U.S. TRADEMARK APPLICATION NO. 85255200 - METALOGIX - N/A Sent: 1/6/2015 11:03:38 PM Sent As: ECOM117@USPTO.GOV Attachments: Attachment - 1 Attachment - 2 Attachment - 3 Attachment - 4 Attachment - 5 Attachment - 6 Attachment - 7 Attachment - 8
SHORT-HD-G1 LIGHT BLUE / GREEN Straight Attachment . XL-HD-G1 LIGHT BLUE / BLACK Straight Attachment CRANI-A-G1 GREEN / GREEN Craniotome Attachment CRANI-P-G1 TURQUOISE / TURQUOISE Craniotome Attachment. 3 English Attachment Color Bars Category CRANI-L-G1 GOLD / GOLD Craniotome Attachment MA-D20-G1 NA Minimal Access Attachment
Oct 01, 2015 · Conformed to FSC New Codes Added No new codes. Added a definition for R&D Stage 7, Commercialization, to the manual (the related codes are already in use in FPDS). 30 new codes to capture missing services. 1 code added to match FSC list. Codes End Dated None 12 ended codes (combined with existing codes). 39 codes which have been in use in FPDS but
cheatcc.codes cheatcode.codes cheatcodes.codes cheats.codes chet.codes chets.codes chilltowin.codes
Day 4: Becoming an EFT Therapist/Attachment Injuries 1. Understand attachment injuries from an Attachment Theory perspective. 2. Understand the steps toward resolving attachment injuries, creating forgiveness. 3. Understand affairs from the perspective of attachment theory. 4. Learn and practice EFT skills toward resolving attachment injuries. 5.
