Dero Bike File - Snyder Equipment

2y ago
50 Views
2 Downloads
2.50 MB
9 Pages
Last View : 1m ago
Last Download : 2m ago
Upload by : Callan Shouse
Transcription

Dero Bike File2946 Larimer St. Denver, CO 80205303-295-1100 / 800-373-7693FAX 303-295-2464Email info@snyderequipment.comwww.snyderequipment.com

DEROBi k e F i l e U-lock compatible Highly efficient bike storage Modular design for easy add-onsThe Bike File is our most space efficient u-lock compatibleproduct. Sturdy sliding hangers allow nine bikes to be securelystored in an eight-foot section while allowing for easy loadingand unloading of bikes.Ceiling mount, wall mount and floor mount options areavailable.www.dero.com1.800.298.4915Printed on recycled paper

Bike FileSpecifications and Space UseProductDero Bike FileAs manufactured by Dero Bike RacksCapacity9 bikes per 8-foot unitMaterials12 gauge galvanized steel trolley trackStainless steel trolley assembly1” 16g armsInstallationMethodsThe Bike File is available in a wall-mounted or ceilingmounted configuration. Please contact us if you areinterested in a floor-mounted Bike File.Space Use andSetbacksBike Files may be lined up end to end to fill the availablespace. A 36” aisle should be left between racks facingone another.96”(Standard Length)36” aisle44”Trolleys allow you to push neighboring bikesapart when hanging or removing a bikeBike Files may be spliced together forexpanded, continuous bike storage.www.dero.com1-800-298-4915

Bike FileCeiling Mount Parts List(1)Splice Slotted Track(1) 96” Slotted Track(2) Unistrut Nuts(3)3/8” x 2.5” Hex Head Cap Screws(6) Washers(3)Channel Trolley Supports(2) ½” x 1” Carriage Bolt(3)3/8” Flange Nuts(3)Lag Screws (for wood ceiling)(3)Wedge Anchors (for pouredconcrete ceiling)(2)End Caps(9)Armswww.dero.com1-800-298-4915

Bike FileInstallation Instructions - Ceiling MountTools Needed for Installation:19/16” Wrench/Socket3/4” Wrench/Socket1/4” Drill Bit or 3/8” Masonry Drill Bit (depending on anchor type)Tape MeasureDrill (Hammer Drill Recommended)HammerLevelSaw for cutting track2Recommended Base Install MaterialNote: if installing a ceiling mounted Bike File, continue with the assembly byfollowing the directions below. If installing a wall mounted or floor mountedmodel, assemble those units according to their instructions first.Installation Steps3Before installing: Make sure the ceiling is strong enough to accommodate therack fully loaded with bikes. Compare parts shipped with rack to the parts liston the previous page. Contact Dero if any parts are missing. Make sure the96” Slotted Track will fit in your space. If necessary, cut the Slotted Track tothe required length.1Mount Channel Trolley Supports in ceiling with appropriate anchors sothat the centers of the brackets are 19” from each end of the 96” SlottedTrack and 32” apart from each other.2Slide 96” Slotted Track through the Channel Trolley Supports so that thecenters of the brackets are 19” from the end of the Slotted Track.3Secure the Channel Trolley Supports onto the 96” Slotted Track by tighteningthe Hex Head Cap Screws and Flange Nuts through the holes in theChannel Trolley Supports.4Insert a ½” Carriage Bolt into the last slot and fasten 3 Washers and aTamperproof Nut. Finish by hammering in an End Cap.5Insert the Trolleys into the open end of the 96” Slotted Track.6If no more Bike Files are going to be spliced together, insert a 3/8” Unistrutnut into the end of the channel and affix with 2 large washers and tamperproof bolt. Finish by hammering in an End Cap.7If splicing an additional length of track, slide the Splice Slotted Track overthe last 6” of the 96” Slotted Track.4567www.dero.com1-800-298-4915

Bike FileWall Mount Parts List(6) 24” Slotted Tracks(3) End Caps(3) Angle Brackets(3) Knee Braces(15) 1/2” Spring-loaded Nuts(15) 1/2” x 1” Hex Head Cap Screws(6)Lag Screws (for wood stud walls)(6)Sleeve Anchors(for concrete block walls)(6)Wedge Anchors (for poured concrete walls)www.dero.com1-800-298-4915

Bike FileInstallation Instructions - Wall MountTools Needed for Installation:9/16” Wrench/Socket3/4” Wrench/Socket1/4” Drill Bit or 3/8” Masonry Drill Bit (depending on anchor type)Tape MeasureDrill (Hammer Drill Recommended)HammerLevelSaw for cutting rack132”32”96”72”Installation StepsBefore installing: Make sure the wall is strong enough to accommodatethe rack fully loaded with bikes. Compare parts shipped with rack toparts list. Call Dero if any parts are missing.12Mount 24” Slotted Tracks vertically to the wall with theappropriate anchors. Use a level for greatest accuracy. Thebottom edge of the Slotted Track should be approximately 72”off the floor. The Slotted Tracks should be 32” apart from eachother, and the end Slotted Tracks should be 19” from the eventualposition of the end of the Trolley track.Mount the remaining 24” Slotted Tracks horizontally andprotruding from the wall so that the slotted surface of theSlotted Track is 4.25” below the top edge of the vertical 24”Slotted Track. Use the Knee Braces, Angle Brackets, and theSpring-loaded Nuts and Hex Head Cap Screws to secure thehorizontal Slotted Track in place.3Make sure the horizontal Slotted Track is level. Adjust if necessary.4Attach the Bike File to the Wall Mount assemblies by securingthe Channel Trolley Supports to the horizontal 24” Slotted Trackwith the remaining Spring-loaded Nut and Hex Head Cap Screw.The edge of the Slotted Track Mounting Bracket should be flushwith the edge of the 24” Slotted Track.5Follow the installation instructions for the basic Bike File unitto complete the 15

Bike FileFloor Mount Parts ListThe floor mounted Bike File MUST be anchoredto the floor. This is NOT a freestanding unit½” x 3” bolts, washers, nutsUprightWedge Anchor 0.375” x 3”www.dero.com1-800-298-4915

Bike FileInstallation Instructions - Floor MountTools Needed for Installation:9/16” wrench/socket¾” wrench/socket, qty. 23/8” masonry bitTape measureDrill (hammer drill recommended)HammerLevel1Installation StepsBefore installing: Make sure the floor is strong enough to accommodatethe rack fully loaded with bikes. Compare parts shipped with rack toparts list. Call Dero if any parts are missing.1Stand the (2) uprights parallel to each other and 48” aparton-center.2Attach the Bike File to the Floor Mount assembly by securingthe Channel Trolley Supports to the uprights with ½” x 3” bolts.3Follow the installation instructions for the basic Bike File unit tocomplete the assembly.4Position Single-sided Floor Mount Assembly and anchor theuprights to the floor with the appropriate anchors.24www.dero.com1-800-298-4915

Bike File Specifications and Space Use Dero Bike File As manufactured by Dero Bike Racks 9 bikes per 8-foot unit 12 gauge galvanized steel trolley track Stainless steel trolley assembly 1” 16g arms The Bike File is available in a wall-mounted or ceiling-mounted configuration. Please contact us if you are interested in a floor-mounted Bike File.

Related Documents:

DERO Donates Bike Repair Stations to the Greenway ¶ Fixit bike repair station in the Greenway, donated by DERO bike racks. Photo courtesy DERO. Thanks to a generous donation from DERO bike rack company, cyclists riding on the Greenway have a new way to pump up sagging bike tires and make quick repairs.

Cora Bike Rack – make the secure Expo Bike Racks. Call 1 (800)-739-4609 or visit Cora Bike Racks Dero in Minneapolis, MN manufacture commercial and custom designed bike racks, lockers and shelters. Dero has been supplying municipal and landsca

Nov 12, 2019 · existing rail road track new street existing building (hi -tech auto body) 20' - 0" 1 proposed dispensary parking new landscaping new short-term bicycle parking . floor rack for bike room rack by dero proposed wall bike rack for bike repair station rack by dero 1/2" 1'-0" 2 enlarged bike roo

Bike, dirt bike PART # 10056 16 oz. Tube Sealant Bike, dirt bike, wheelbarrow Family Size PART # 10056HT 16 oz. Tube Sealant with hang tag Bike, dirt bike, wheelbarrow Family Size PART # 10159 3 oz. Slime Pro Tubeless Sealant Bike PART # 10160SL 8 oz. Slime Pro Tubeless Sealant Bike PART # 10004 16 oz. Tube Sealant B

10 Hoop Rack Hoop Rack Heavy Duty Round Rack Arc Rack 11 Swerve Rack Bike Hitch Downtown Rack 12 Bike Bike Rack Cycle Dock 13 Helix Rack Hi Roller Campus Rack Rolling Rack CUSTOM BIKE RACKS 14 Full Custom Designs Image Infusion 15 Logo Racks Icon Hitch Type Rider Racks SPECIALTY RACKS 16 Event Rack Compack R

Bike File Setbacks Bike Files may be lined up end to end to fill the available space. A 36” aisle should be left between the ends of bikes in racks facing one another. 96

Bike File 13 Ultra Space Saver Squared Ultra Space Saver Ultra Space Saver Single 2-TIER PARKING 15 Dero Decker Dero Duplex CUSTOM BI

Basic Engineering Design Process Chris Hamilton, P.E. Assistant State Conservation Engineer 2008 ICE Training. What is an Engineering Design? An orderly process of collecting, recording, and analyzing all the facts and data needed to arrive at a satisfactory solution to a problem. NEM-VA501.09 through VA501.19 outlines the policy for performing engineering work for NRCS in Virginia. EFH .