AT&T Raven XE 4.0 - RFWEL
Raven XE for AT&TUser Guide20080605Rev 2.0
PrefaceImportantNoticeDue to the nature of wireless communications, transmission and reception of datacan never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or betotally lost. Although significant delays or losses of data are rare when wirelessdevices such as the Sierra Wireless modem are used in a normal manner with awell-constructed network, the Sierra Wireless modem should not be used insituations where failure to transmit or receive data could result in damage of anykind to the user or any other party, including but not limited to personal injury,death, or loss of property. Sierra Wireless accepts no responsibility for damagesof any kind resulting from delays or errors in data transmitted or received usingthe Sierra Wireless modem, or for failure of the Sierra Wireless modem totransmit or receive such data.Safety andHazardsDo not operate the Sierra Wireless modem in areas where blasting is in progress,where explosive atmospheres may be present, near medical equipment, near lifesupport equipment, or any equipment which may be susceptible to any form ofradio interference. In such areas, the Sierra Wireless modem MUST BEPOWERED OFF. The Sierra Wireless modem can transmit signals that couldinterfere with this equipment.Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft ison the ground or in flight. In aircraft, the Sierra Wireless modem MUST BEPOWERED OFF. When operating, the Sierra Wireless modem can transmitsignals that could interfere with various onboard systems.Note: Some airlines may permit the use of cellular phones while the aircraft is on theground and the door is open. Sierra Wireless modems may be used at this time.The driver or operator of any vehicle should not operate the Sierra Wirelessmodem while in control of a vehicle. Doing so will detract from the driver oroperator's control and operation of that vehicle. In some states and provinces,operating such communications devices while in control of a vehicle is an offence.Limitation ofLiabilityThe information in this manual is subject to change without notice and does notrepresent a commitment on the part of Sierra Wireless. SIERRA WIRELESS ANDITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALLDIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL,PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO,LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUEARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESSPRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEENADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY AREFORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY.Notwithstanding the foregoing, in no event shall Sierra Wireless and/or itsaffiliates aggregate liability arising under or in connection with the Sierra Wirelessproduct, regardless of the number of events, occurrences, or claims giving rise toliability, be in excess of the price paid by the purchaser for the Sierra Wirelessproduct.Rev 2 Mar.10i
Raven XEPatentsThis product may contain technology developed by or for Sierra Wireless Inc. Thisproduct includes technology licensed from QUALCOMM . This product ismanufactured or sold by Sierra Wireless Inc. or its affiliates under one or morepatents licensed from InterDigital Group.Copyright 2012 Sierra Wireless. All rights reserved.TrademarksAirCard is a registered trademark of Sierra Wireless. Sierra Wireless ,Watcher AirPrime , AirLink , AirVantage and the Sierra Wireless logo aretrademarks of Sierra Wireless.Windows and Windows Vista are registered trademarks of MicrosoftCorporation.Macintosh and Mac OS X are registered trademarks of Apple Inc., registered inthe U.S. and other countries.QUALCOMM is a registered trademark of QUALCOMM Incorporated. Usedunder license.Other trademarks are the property of their respective owners.ContactInformationSales Desk:Phone:1-604-232-1488Hours:8:00 AM to 5:00 PM Pacific TimeE-mail:sales@sierrawireless.comPost:Sierra Wireless13811 Wireless WayRichmond, BCCanadaV6V sult our website for up-to-date product descriptions, documentation,application notes, firmware upgrades, troubleshooting tips, and press releases:www.sierrawireless.comii20080605
ContentsIntroduction to the Raven XE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1ACEware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Simplified Deployment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Monitor and Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Modem Doctor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Connecting to AT&T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Steps of a connection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Dynamic vs. Static IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5EDGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5GPRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Connection methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Virtual serial port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6IPSec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6GRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Events Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Tools and Reference Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Bands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Power Consumption: (@12V DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Standards/Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Host Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Application Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Rev 2.0 Mar.101
ContentsPower Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Activating Raven XE on AT&T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Installing the SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cellular Account Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Software Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hardware Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1212121212Configuring the APN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Hardware Installation of the Raven XE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Connecting to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Connecting to a Computer or other Device . . . . . . . . . . . . . . . . . . . . . . . . . 18Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Light Patterns. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Connecting the Raven XE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24ACEmanager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Using a Terminal Application with AT Commands . . . . . . . . . . . . . . . . . . . . 24AT Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Federal Communications Commission Notice (FCC United States) . . . .30Industry Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Antenna Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31RF Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31EU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31WEEE Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Rev 2.0 Mar.102
Raven XEiv20080605
11: Introduction to the Raven XE ACEware Connecting to ationsSoftwareDocumentationThe Raven XE is an intelligent wireless gateway, powered byALEOS , and optimal for providing primary or backup networkconnectivity for any high-reliability/ high-availability applications.The Raven XE is the perfect solution for any device with an Ethernetconnection that requires pervasive connectivity including PCs,routers, network equipment and POS/ATMs as well as commercialautomation equipment.Powered by ALEOS , Raven XE modems are designed to maintaina reliable, consistent network connection. Class I Divison 2 certifiedas nonincendive equipment, the Raven Series is ideally suited for usein hazardous environments.Key applications include utilities, manufacturing, automation, oil andgas, ethernet-based SCADA, telemetry, Homeland Security andasset monitoring.Figure 1-1: Sierra Wireless AirLink Raven XEALEOS, the embedded core technology of the Sierra WirelessAirLink products simplifies installation, operation and maintenance ofany solution, and provides an always-on, always-aware intelligentconnection for mission-critical applications. ALEOS enables:Rev 2.0 Mar.10 Persistent Network Connectivity Over-The-Air (OTA) Upgrades1
Raven XE Wireless Optimized TCP/IP Real-Time Notification Packet Level Diagnostics Device Management & Control Protocol SpoofingFigure 1-2: Powered by ALEOSACEware A wireless solution is not complete until you have software tools to manage thedevices monitoring your valuable equipment. Using the AirLink ControlEnvironment (ACE), ACEWare is the device management and monitoringapplication suite for Sierra Wireless AirLink devices powered by ALEOS.Figure 1-3: ACEware LogoThe ACEware suite encompasses an application internal to the firmware (ACEmanager), Windows-based applications (ACEview and Modem Doctor), anda web-hosted application (ACEnet). You can download the applications and theiruser guides from the Sierra Wireless AirLink Solutions web site: http://www.sierrawireless.com/support. Contact your dealer or Sierra Wirelessrepresentative for any further information.Note: ACEview requires the Microsoft .NET Framework v. 2.0 and Microsoft Windows 98,Windows 2000, Windows XP, or later. You can obtain the Microsoft .NET Framework fromMicrosoft at: http://www.microsoft.com/.ACEmanager, the AceWare remote configuration and monitoring tool, simplifiesdeployment and provides extensive monitoring, control and managementcapabilities. ACEmanager gives you the power to monitor and control your SierraWireless AirLink communications platforms in real-time.220080605
Introduction to the Raven XESimplified DeploymentACEmanager provides the ability to remotely set up and configure your SierraWireless AirLink products. Remote device setup and configuration reduces thedeployment timeline of your wireless solution and provides a quicker path to ROI.Templates allow you to easily configure devices in your fleet with identicalsettings, ensuring a simple, accurate deployment.Monitor and ControlACEmanager allows an administrator to remotely monitor a modem’s status,health and configuration settings. The user interface displays signal strength, cellsite information, byte counters and error conditions, enabling you to pinpoint anyissues and troubleshoot immediately.ACEmanager enables remote configuration and parameter settings to bechanged or reset instantly over the air, change a device’s port configuration, IPaddress settings, GPS settings, and much more. After configuring one modem,use the template feature to copy that device configuration to other devices.Tip: Configuration steps and examples in this guide use ACEmanager.ACEview is an efficient status and connection monitoring application with a lowprofile, easy to read interface. In ACEview, you can also update PRL.Modem DoctorModem Doctor and Modem Doctor USB is a troubleshooting and diagnosticsutility. This utility will allow you to get a log file of the Raven XE activity which youcan then send to Sierra Wireless support or erase the current configurationcompletely.Figure 1-4: Modem DoctorRev 2.0 Mar.103
Raven XEConnecting to AT&TThe Raven XE uses AT&T as an ISP (Internet Service Provider) to connect you tothe Internet.Steps of a connection:1. Your Raven XE establishes a PPP (Point to Point Protocol or “dial” upconnection) link to AT&T network, also called registering on the network, andreceives an IP address.2. When your Raven XE has received its IP address from AT&T, a connection tothe Internet or the cellular network is also available for computers or otherdevices connected directly to the Raven XE.The Raven XE will perform routing for all internet traffic to and from thecomputers or other end devicse.With the Raven XE in Ethernet Public mode, only one device connected to theEthernet port will receive the public IP address which is the one provided by thecellular network. In Ethernet Private mode, with a hub or switch connected to theEthernet port, the Raven XE will provide NAT for a range of computers or otherdevices connected to the switch or hub and Internet access to all of them.Dynamic vs. Static IP AddressesThere are two types of addresses on networks: dynamic and static. Dynamic addresses are assigned on a “need to have” basis. Your Raven XEmight not always receive the same address each time it connects with AT&T. Static addresses are permanently assigned to a particular account and willalways be used whenever your Raven XE connects to the Internet. The IPaddress will not be given to anyone else.Most ISPs (cellular included) use dynamic IP addresses rather than static IPaddresses since it allows them to reuse a smaller number of IP addresses for alarge number of customers. A dynamic IP address is suitable for many commonInternet uses, such as web browsing, looking up data on another computersystem, or other client functions (such as data only being sent out or only beingreceived after an initial request).Tip: If your account with AT&T includes a dynamic IP address and you need a static IP,please consult your AT&T Representative for more information about changing youraccount for static IP support.If you need to contact your Raven XE, a device connected to the Raven XE, or ahost system using the Raven XE from the Internet, you need to have a known IP(such as one which is static) or domain name (an IP address which is convertedby a DNS server into a word based name). If you have a dynamic IP address foryour modem, you can use a Dynamic DNS service (such as IP Manager) totranslate your IP address into to a domain name.420080605
Introduction to the Raven XECaution: If you want to connect remotely to your Raven XE using TCP/IP, the IP addressgiven to your modem by AT&T cannot be a private or internal IP address (such as a specialprivate network) unless you are on the same network or inside that network’s firewall (suchas with frame relay).CommunicationGSM Networks use SIM cards which are smart cards containing the accountholder’s details. A SIM can generally be moved from one device to anotherallowing for account portability and flexibility.EDGEEDGE (Enhanced Data rates for GSM Evolution) provides end-to-end packet dataservices with an enhanced connectivity building on GPRS technology and usingthe established GSM networks. EDGE provides higher transmission rates andbetter transmission quality for data than GPRS. EDGE can carry data at speedstypically up to 384 kbit/s in packet mode.When EDGE is not available, your Raven XE will fall-back to GPRS for theconnection to AT&T to provide continued connectivity.GPRSGeneral Packet Radio Service (GPRS) is packet-switched with many userssharing the same transmission channel, but only transmitting when they havedata to send. This means that the total available bandwidth can be immediatelydedicated to those users who are actually sending at any given moment,providing higher utilization where users only send or receive data intermittently.GPRS provides speeds of 30–70 kbps with bursts up to 170 kbps.Connection methodsYou can connect the Raven XE to a USB or a Ethernet (RJ45) on a computer.When connected to a USB or Ethernet port, the Raven XE behaves like a networkcard.USBThe Raven XE is equipped with a USB port which increases the methods bywhich you can send and receive data. The USB port can be set to work as eithera virtual Ethernet port or a virtual serial port. A driver installation is required touse the USB port in either mode.Rev 2.0 Mar.105
Raven XEIt is recommended that you use a USB 2.0 cable with your Raven XE and connectdirectly to your computer for best throughput.Virtual serial portThe Raven XE supports one virtual serial port over USB. This VSP can be used,for example, to send AT commands, or to run many serial based applicationssuch as HyperTerminal .NetworkingIPSecThe IP protocol that drives the Internet is inherently insecure. Internet ProtocolSecurity (IPSec), which is a standards-based protocol, secures communicationsof IP packets over public networks.IPSec is a common network layer security control and is used to create a virtualprivate network (VPN).The advantages of the IPSec feature includes: Data Protection: Data Content Confidentiality allows users to protect theirdata from any unauthorized view, because the data is encrypted (encryptionalgorithms are used). Access Control: Access Control implies a security service that preventsunauthorized use of a Security Gateway, a network behind a gateway orbandwidth on that network. Data Origin Authentication: Data Origin Authentication verifies the actualsender, thus eliminating the possibility of forging the actual sender’s identification by a third-party. Data Integrity: Data Integrity Authentication allows both ends of the communication channel to confirm that the original data sent has been received astransmitted, without being tampered with in transit. This is achieved by usingauthentication algorithms and their outputs.The IPSec architecture model includes the Sierra Wireless AirLink gateway as aremote gateway at one end communicating, through a VPN tunnel, with a VPNgateway at the other end. The remote gateway is connected to a Remote networkand the VPN is connected to the Local network. The communication of data issecure through the IPSec protocols.620080605
Introduction to the Raven XEFigure 1-5: IPSec ArchitectureGREGRE (Generic Routing Encapsulation) tunnel is used to carry non-IP packetsthrough an IP Network. Non -IP packets, that are send over the GRE tunnel, needto be first encapsulated. Hence, ALEOS is used to configure and encapsulatenon-IP packets and transmit over IP through the GRE tunnel.ApplicationsEvents ReportingEvents Reporting is Sierra Wireless AirLink’s modem’s new software featureprovided via ACEmanager, that allows the users to generate reports from theevents that take place. Event Reporting Protocol is an intuitive embeddedprotocol, which automatically formats the messages based on an event trigger.The messages generated are then reported to the remote server.SoftwareThe Raven XE modem comes with the following software: AceView, the software for the Raven XE which allows you to monitor yourconnections. The driver that forms the interface between the Raven XE and your Windowsoperating system when using USB virtual Ethernet or USB virtual serial. The firmware that is stored in non-volatile memory and includesACEmanager.The Raven XE has an embedded radio module, also made by Sierra Wireless, Inc. There are two firmware programs on the device—one stored on thecontroller board of the Raven XE and one on the radio module.The firmware was loaded into the radio module and controller board when theRaven XE was assembled. As new versions of the software and firmware arereleased, they are posted at www.sierrawireless.com.Rev 2.0 Mar.107
Raven XEDocumentationThis Raven XE User Guide describes how to: Install the Raven XE hardware. Connect the radio antennas. Connect a notebook computer and other input/output(I/O) devices. Interpret the LEDs on the Raven XE and the indicators in the AceViewsoftware.This User Guide is provided as a PDF (Portable Document Format) file on theinstallation CD or from the Sierra Wireless support website.Tools and Reference DocumentsUser Guide8DescriptionALEOS User GuideThis document discusses software configuration in ACEmanager and explains all theALEOS features.ACEview User GuideThis document explains the use of this utility tools which is used to view and monitor theconnection state of a Sierra Wireless AirLink device.ACEnet User GuideThis document explains the use of ACEnet services for remote management of SierraWireless AirLink device.20080605
22: Specifications Power ConnectorFeatures and Benefits Embedded Intelligence Low Power Consumption Compact Size Rugged Aluminium Case High‐Speed Processor (ARM 9) High‐Speed 2‐way Data 10/100 Mbps Ethernet Port Persistent Network Connectivity Remote Management and Configuration Class I Div 2 CertifiedTechnology HSUPAWith Fallback to:· HSDPA· UMTS· EDGE· GPRS (MS‐12)· GSMBands TriBand for UMTS/HSDPA/HSUPA· 850/1900/2100 MHz Quad Band GPRS/EDGE· 850/900/1800/1900 MHzEnvironmental Operating Temperature:· ‐30 to 70 Celsius Storage Temperature:· ‐40 to 85 CelsiusPower Consumption: (@12V DC)Rev 2.0 Mar.10 Transmit (Typical/Max) 110/265 mA Idle 80 mA Input Current 75 mA to 265 mA Input Voltage 9 ‐ 28V DC9
SpecificationsStandards/Approvals Carrier specific approvals CE (Class A device per EN55022) RoHS FCC Industry Canada PTCRB This apparatus is suitable for use in Class I, Division 2,Groups A, B, C, D or unclassified or non‐hazardouslocations.Warning: Explosion Hazard - Substitution of anycomponents may impair suitability for Class I,Division 2.Note: In consideration of EUregulations, this device isclassified as Class A device foruse in commercial environments.Host Interfaces Ethernet: 10BaseT RJ‐45 USB Type B 5 Pin mini Antenna Connection:· Cellular ‐ 50 Ohm SMA· Receive Diversity ‐ 50 Ohm SMA· I/O Ports: 2Warning: The antenna should be installed nocloser than 20 cm from the human body. It is one ofthe RSS-102 requirements for devices not requiringSAR.Dimensions 75mm x 27mm x 103mm 185 gramsApplication Interfaces TCP/IP, UDP/IP, DHCP, HTTP, SNMP, SMTP, SMS, MSCI,Modbus and moreLED IndicatorsRev 2.0 Mar.10 Network Signal Activity10
Specifications Power Reset ButtonPower Connector* Configuration terminology in ACEmanagerFigure 2-1: Power Connector (not to scale)Warning: Explosion Hazard - Do not disconnectequipment unless power has been switched off orthe area is known to be non-hazardous.Note: Raven XE I/O Port 4 is software configurable.Rev 2.0 Mar.1011
33: Activating Raven XE on AT&T Installing the SIM Configuring theAPNThis chapter provides step-by-step directions for activating yourRaven XE on AT&T’s network.HInstalling the SIMThe Subscriber Identity Module (SIM) in the Raven XE is a smartcardthat securely stores the key identifying a cellular subscriber.Generally, you will only need to install a SIM once in the life of themodem and it may be pre-installed by your Sierra WirelessRepresentative.If the SIM was pre-installed, unless you need to set a custom APN,activation of your modem is complete.Cellular Account Required Cellular Account Required- To use your modem, you need tohave a SIM with an active account in a data plan, with yourcellular provider (EDGEor HSUPA/HSDPA).Software Required ACEmanager - Graphical interface for entering most ATCommands. You can download ACEmanager from the SierraWireless AirLink Solutions website: http://www.sierrawireless.com/support/. A default installation of thisutility is assumed later in these directionsHardware Required Ethernet cable - An Ethernet cable is required.Note: Until you install a driver for the USB port, you cannot use your USBport to configure the modem. Power adapter and a power source - You will need a powersupply and power source for the modem. PC or laptop - To configure the modem, you will need acomputer with an available Ethernet portserial port.Tools Required Rev 2.0 Mar.10Small Phillips screw driver - The Phillips screw driver is the onewhich is also called a plus ( ) or X screw driver.12
Raven XE Slim stylus - A PDA stylus, an unbent paperclip, or other such item.Figure 3-1: FaceplateWarning: Explosion Hazard. Do Not remove or replace Plug-in Modules unless powerhas been disconnected or the area is known to be free of ignitible concentrations offlammable Gasses or vapors.1. Opening the Casea. Unplug the Raven XE power and all cables.b. Using a small phillips head screw driver, remove the screws on the backof the Raven XE.2. Remove the SIM from the carda. Carefully remove the SIM card from the card you received from AT&T.Figure 3-2: Sample of the SIM card3. Insert the SIMa. Gently press the SIM card to click it into place.Tip: The top of the card faces the bottom of the modem.1320080605
Activating Raven XE on AT&TNote: The card and SIMmay be a different colorthan these examples.Figure 3-3: Insert SIM in to the modem4. Finishing the SIM installationWhen the faceplate is replaced and secured, the installation of the SIM iscomplete. Secure the front of the Raven XE with the screws.Configuring the APNThe APN (Access Point Name) is the way your modem knows how it will becommunicating with the network. The APN allows custom IP addressing andtailoring your company's wireless IP solution to meet the security and IPaddressing requirements of your applications.Note: Most accounts use the default addressing solution of Private or Public IP addressessupplied by the Internet and Proxy APNs. Only if you have a Static or Custom IP addressshould you need to configure a custom APNs.The default APN is Internet. If you need a different APN, use ACEmanager toconfigure it.Rev 2.0 Mar.1014
Raven XE1520080605
4: Hardware Installation of the Raven XE 4 Connecting toPower Connecting to aComputer or otherDevice Indicator Lights MountingNote: During installation,please be sure that thecables are secure but donot bear any additionalweight that could loosenthe connector from theunit.Your Raven XE should be mounted in a position that allows easyaccess for the cables so they are not bent, constricted, in closeproximity to high amperage, or exposed to extreme temperatures.The LEDs on the front panel should be visible for ease of operationalverification. You should ensure that there is adequate airflow aroundthe modem but that it is kept free from direct exposure to theelements, such as sun, rain, dust, etc.Caution: The Raven XE is in a hardened case and designed for use inindustrial and extreme environments. However, unless you are using cablesexpressly designed for such environments, they can fail if exposed to thesame conditions the Raven XE can withstand.Figure 4-1: Raven XE ConnectorsNote: At least 20 cmseparation distancebetween the antenna andthe user's body must bemaintained at all times.Antennas selected should not exceed a maximum gain of 5 dBi understandard installation configuration. In more complex installations(such as those requiring long lengths of cable and/or multipleconnections), it’s imperative that the installer follow maximum dBigain guidelines in accordance with the radio communicationsregulations of the Federal Communications Commission (FCC),Industry Canada, or your country’s regulatory body (if used outsidethe US).Your Raven XE will work with most PCS cellular antennas with a SMAconnector that works in the high and l
Raven XE 4 20080605 Connecting to AT&T The Raven XE uses AT&T as an ISP (Internet Service Provider) to connect you to the Internet. Steps of a connection: 1. Your Raven XE establishes a PPP (Point to Point Protocol or “dial” up connection) link to AT&T network, also called r
Raven 860 Ultra 48 48 48 50 91 - U.S. High quality inks including heatset, sheetfed, and packaging Raven 850 63 63 - 75 101 - U.S. Coatings, inks, and plastisol Raven 820 73 71 120 - 100 - Canada Flexographic ink Raven 790 Ultra 64 64 - 105 95 - U.S. Sealants Raven 780 Ultra 89 77 58 60 109 - U.S. Toner and specialty inks
John Carlye Raven: The Man Aspects of his Personal Life John Carlyle Raven was born in North London in 1902 to John Raven, a warehouseman to the umbrella maker Grant Barnett (who are still in business), and Jane Elizabeth Raven (nee Martin). They had married in St. Matthew's Church, Westminster in 1894. J.C.Raven was the
The low operating cost makes the R44 Raven I an excellent flight trainer. R44 Raven II delivers increased altitude performance. AIR CONDITIONING Available on the Raven II, the air condi-tioning system features front and
Raven X-HSPA Sierra Wireless Cellular Modem 8 xC2675 Raven Mounting Kit – includes mounting hardware for securing the modem to below referenced environmental enclosure. Raven X should be mounted in a position that allows easy access for the cables so they are not bent, constricted xAntenna – the following antennas are available from CampbellFile Size: 2MB
Gray Eagle had a beautiful daughter, and Raven fell in love with her. In the beginning, Raven was a snow‐white bird, and as a such, he pleased Gray Eagle's daughter. She invited him to her father's longhouse. When Raven saw the Sun, Moon and stars, and fresh water hanging
ravens. Alternative D would incorporate raven removal in the areas identified in Alternative C and raven concentration areas, such as landfills. Alternative E would use nonlethal methods to reduce human subsidies of food, water, nest sites, and roost sites for the common raven thereby eventually reducing the size of the common raven population.
Side of the Raven. The maximum current draw is 100mA though in reality much less most of the time, the higher the input voltage the less current the Raven will draw. There are two red led's on the Raven. Both are indicators that there is power being supplied. The one on the safe side, marked "Main Power" indicates main power is on.
BEAM Team Memo Rosalind Arwas Carolyn Perkins Helen Woodhall A very warm welcome to the March/April 2021 edition of The BEAM. This time last year, the spring edition unexpectedly almost became our last but, as the
