SAP LT Replication Server Overview
SAP Landscape Transformation Replication ServerOverview PresentationAGS-SLO Product Management, SAP AGPublic
DisclaimerThis presentation outlines our general product direction and should not be relied on in making apurchase decision. This presentation is not subject to your license agreement or any other agreementwith SAP. SAP has no obligation to pursue any course of business outlined in this presentation or todevelop or release any functionality mentioned in this presentation. This presentation and SAP'sstrategy and possible future developments are subject to change and may be changed by SAP at anytime for any reason without notice. This document is provided without a warranty of any kind, eitherexpress or implied, including but not limited to, the implied warranties of merchantability, fitness for aparticular purpose, or non-infringement. SAP assumes no responsibility for errors or omissions in thisdocument, except if such damages were caused by SAP intentionally or grossly negligent. 2013 SAP AG or an SAP affiliate company. All rights reserved.Public2
AgendaOverviewBasic Concept, Architecture & Main FeaturesTechnical Prerequisites & SizingSummary & Outlook 2013 SAP AG or an SAP affiliate company. All rights reserved.Public3
Overview
Product Name and Positioning within RTDPSAP Landscape TransformationReplication ServerSAP LT Replication Server (SLT) is positioned for real time (trigger-based) datareplication from SAP and non-SAP sources (SAP supported databases only). Mainly Recommended for real-time data replication business scenarios 2013 SAP AG or an SAP affiliate company. All rights reserved.Public5
Comprehensive Data ProvisioningReal-time high volume data integration from any sourceData MovementOver NetworksAny SourceTrigger-BasedSAP Business SuiteLog-BasedNon-SAP Data SourcesODBCSAP LT ReplicationServerSAP SybaseReplication ServerETL, BatchSAP Data ServicesCloud DeploymentsComplex EventData SourceEvent StreamsNetwork Devices– Wired / WirelessData SynchronizationSAP SybaseSQL AnywhereData Sources(SP6: HANA, IQ, ASE, Hadoop,Data VirtualizationSAP HANA SmartData AccessTeradata) 2013 SAP AG or an SAP affiliate company. All rights reserved.Transform andPersist DataSAP HANAVirtual TablesSAP Sybase EventStream ProcessorPublic6
Enable Real-time Replication within your Entire ssBusinessSuiteSuiteSuiteSAP LT Replication ServerSAP HANA ApplianceBI ClientRead Enginereal timeIn-MemoryMapping &Transformation EngineWrite Enginereal timeSAP HANAStudioSAP HANADBSAP HANADBIn-Memorynon-ABAPData Services4.2 SP1(SAP supported DBs)non-ABAP(SAP supported DBs)Source Systems 2013 SAP AG or an SAP affiliate company. All rights reserved.SAP LT Replication ServerTarget SystemsPublic7
SAP Landscape Transformation Replication ServerLeverages proven AGS SLO*) Technologies Status 31.7.2013: 261 customers use SAP LT ReplicationServer SLO* technologies have been used since more than 10years in hundred of projects per yearSAP Application Lifecycle Management (ALM)Fast, scalable & reliable DB trigger-basedchange capturing capabilities Key offerings foster SAP‘s Application LifecycleManagement concept SAP LT Replication Server leverages several SLOtechnologiesSolutionManagerComprehensive data transformation and filtering capabilities* System Landscape Optimization, SAP Active Global Support 2013 SAP AG or an SAP affiliate company. All rights reserved.Public8
Technical Enabler for Multiple Data Provisioning Use CasesSAP LT Replication Server for SAP HANASAP LT Replication Server for SAP BWIntegrated into SAP HANA Studio(also used by SAP HANA RDS Solutions)Real-time Data Acquisitionfor SAP BWKey AchievementsKey Achievements Majority of all productive HANA customers use SLT real-timereplication Customer quotes and success stories available SLT is default replication engine for all HANA live (side-car)applications First customer is live using SLT for non-SAP replication into SAP BW Customers consider SLT as key asset for their SAP BW on HANAstrategy Several functional enhancements included with DMIS 2011 SP05Replication Engine for SAP HANA ApplicationAcceleratorsAdditional Scenarios(some on project basis available only)Key AchievementsKey Achievements HANA RDS solutions for data mart scenarios include SLT content New HANA application accelerators leverage SLT Switch-Kernel based and HANA optimized functions use SLT 2013 SAP AG or an SAP affiliate company. All rights reserved.ODQ introduced as generic data storageSLT replication used for migration to PMR 8.0High demand for SAP to SAP (but also non-SAP) replicationSLT ready as heterogeneous fallback solutionPublic9
Licensing AspectsReplication Target is SAP HANASAP Landscape Transformation Replication Server is part of thesoftware license model: HANA Enterprise editionHANA Insight, enterprise editionHANA real-time data editionHANA EDGE editionHANA Limited Runtime edition for Applications (LREA)HANA Limited Runtime edition for Applications and SAP BW (LREAB)Replication Target is not SAP HANAIf the replication target system is not covered by a HANA-basedlicense (i.e. in case of a SAP NetWeaver Business Warehousesystem), the following license for usingSAP Landscape Transformation Replication Server is required: SAP LT Basis (Material Number 7010685)SAP LT IT Consolidation (Material Number 7010688)SAP LT Value chain harmonization (Material Number 7010687) 2013 SAP AG or an SAP affiliate company. All rights reserved.Public10
Customer Statements“ ”The most fascinating factor to adopt HANA was the functionality of HANA and SLT which enables real time collaboration.Fujimoto, Sub-Director Information System Department (Press article „Nikkei Joho Strategy” Oct 5, 2013)“ ”We use data transformation services and SLT. And I think at this point, we've moved everything to SLT.SLT is driving all of the real-time [transfer of data] right into HANA.Quite frankly we didn't think we were able to do this and you guys really did a great job with the SLT product,because when I talk with my architect folks, they were thrilled with not only how it runs day by day,but also if something goes wrong, the recovery capabilities of SLT.Paul Fipps, CIO and Vice President, Business Services, The Charmer Sunbelt Group (Customer Insights, Walldorf 2012)“ ”The shift to SLT really drove efficiencies in building up the data set by leveraging HANA to overcome some of the challengesof the ECC environment. We didn't have to spend the time it would typically take on architecting what that data model wouldlook like. It's also enabled us to really free up and improve the cycle time of data availability for the business teams. So wherein the past you might say that I need to take a segment of [tables] and I am pulling particular fields out of the database forperformance reasons, we are now simply taking the entire table.Justin Replogle, Dir. Business Intelligence, Honeywell (SAPPHIREnow, Orlando 2012)““To ”deal with the difficulties associated with transmitting data from older systems, we installed SAP LT ReplicationServer, which worked out well and solved our problems.”“With the SLT tool, we can take any table to SAP HANA and write a report. It will be quick and efficient. From whatwe’ve observed in the proof of concept thus far, these changes are real. If you estimate how much we haveinvested in SAP HANA or in old technology, there will be an undoubted advantage for SAP HANA. Theseinvestments will come back very quickly.”Rinat Gimranov, CIO of Surgutneftegas (insider PROFILES 7/2012) 2013 SAP AG or an SAP affiliate company. All rights reserved.Public11
Customer Success Summaries (extract)Re-allocation & scheduling of available Inventory in realtime0.5% Monthly revenue increasePer a 1% increase in the fill rateUse real-time information to operate its call centerswith greater productivity, a higher first-callresolution rate, and a lower cost per transaction.5% Cost ReductionIn total overall cost Real-time decision-making andgreater control of the supply chainfor better inventory management 50% Decrease in inventory Snapshots of businessprofitability available in real time,and enhanced customer serviceand support 25% Monthly revenue increase(estimated increase) 2013 SAP AG or an SAP affiliate company. All rights reserved.Drive profitable decision with real-time analysis fordemand planning (sourcing) and sales negotiations(commercial margin)- 500k Capital working capital reduction within a week Real-time decisions regarding thecompany’s long-term development,improving efficiency and lowering costs 35% Decreasein Transportation Costs Reduced IT team engagementtime from one day to mere seconds,in financial closing 645k in annuallabor cost savingsHelp Brands Harness the Power ofWord-Of-Mouth from social media 17M RevenueEstimated increase revenue with new customersPublic12
SAP Landscape Transformation Replication ServerPositioning and BenefitsSAP Landscape Transformation Replication Server(aka “SLT”) is the best choice for all SAP HANAcustomers who need real-time or scheduled datareplication from SAP and NON-SAP sources withthe option to accomplish even complex datatransformations on the fly. Allows real-time (and scheduled) data replicationAbility to migrate data into HANA format while replicating data in real-time„Unlimited“ release coverage (from SAP R/3 4.6C onwards) sourcing data from ABAP based SAP applicationsHandling of cluster and pool tablesAutomatically non-Unicode to Unicode conversion during load/replicationTable settings and transformation capabilities (e.g. data filtering, enrich table structure, anonymize data, etc.)Fully integrated with SAP HANA Studio (Data Provisioning and Data Modeler UI)Enhanced monitoring capabilities via SAP Solution Manager 7.1 SP5 onwards & mobile app SAP Replication Manager 2013 SAP AG or an SAP affiliate company. All rights reserved.Public13
Basic Concept , Architecture& Main Features
Architectural Concept 1/2Replication from ABAP sources systemSAP HANA StudioSAP LT Replication ServerSAP Business SuiteRead EngineRead EngineRFCConnectionSAP HANAMapping &Transformation EngineApplication TablesWrite EngineApplication tableDBConnectionLogging tableDB triggerABAP Source SystemEfficient implementation of datareplication via DB triggerbased on change capturing concept 2013 SAP AG or an SAP affiliate company. All rights reserved.SAP LT Replication ServerHighly scalable and reliable replicationprocess, including comprehensive datatransformation capabilities on the flyTarget SystemsFast data replication via DB connection,integration into SAP HANA StudioPublic15
Architectural Concept 2/2Replication from non-ABAP sources systemSAP HANA StudioSAP LT Replication ServerNon-ABAP SystemDBConnectionSAP HANARead EngineApplication TablesMapping &Transformation EngineApplication tableLogging tableWrite EngineDBConnectionDB triggerNon-ABAP Source SystemSAP LT Replication ServerTarget SystemsSAP LT Replication Server transfers all metadata table definitions from the non-ABAP source system to the HANA system. From the HANA Studio perspective, non-SAPsource replication works the same as for SAP sources. When a table replication is started, SAP LT Replication Server creates logging tables in the source system. Theread engine is created in the SAP LT Replication Server. The connection the non-SAP source system is established as a database connection. 2013 SAP AG or an SAP affiliate company. All rights reserved.Public16
DB Supportability Matrix for Replication to SAP HANATechnical availabilityDatabaseSAP SourcesNon SAP Sources (*)MSFT SQL Server Enterprise EditionOKOKOracle Enterprise EditionOKOKIBM DB2 LUW/ UDB (DB6)OKOKIBM DB/2 zSeriesOKOKIBM DB2 iSeries (former AS/400)OKOk – for simple table structuresIBM InformixOKOKSAP MaxDBOKOKSybase ASESAP HANAOKOK(with DB-Version 15.7.0.11)(with DB-Version 15.7.0.11)OKOKFor non-SAP source systems, the customer database license needs to cover a permanentdatabase connection with 3rd party products like SAP LT Replication Server.(*) Since a DB connection from LT replication server to a non-SAP system is required, the OS/DB restrictions of SAPNetWeaver 7.02 or higher apply (see at http://service.sap.com/pam) 2013 SAP AG or an SAP affiliate company. All rights reserved.Public17
Multi System SupportSystem ASystem BSchema 1Schema 2Source systemsSAP HANA systemSystem ASchema 1System BSchema 2Source systemsSAP HANA systemsSystem ASchema 1System BSource systemsSystem ASchema 2 2013 SAP AG or an SAP affiliate company. All rights reserved.Source systems are connected toseparate HANA systems. Schemaname can be equal or differentSource systems are connected tosame HANA system and also thesame schemaSAP HANA systemSchema 1SAP Source systemSource systems are connected toseparate HANA schema on thesame HANA systemSAP HANA systemsSAP source system is connectedto separate HANA systems or tothe same system with differentschema name.Public18
Setup, Execution & Monitoring of a ReplicationSAP LT Replication ServerSAP HANADBSAP HANAStudioIn-MemoryNew guided procedure to create aconfiguration between source andtarget system.Setup Replication 2013 SAP AG or an SAP affiliate company. All rights reserved.Start the replication for the relevanttables via SAP HANA Studio.Execute ReplicationMonitor ReplicationPublic19
Setup Replication – Specify General DataExecute transaction LTR in the SLT system to open the Configuration and Monitoring DashboardIn the first step, you define theconfiguration name and a description.The configuration name will be alsoused as the new schema name thatwill be created in the HANA system.With DMIS 2011 SP5, a guided procedure helps to execute the creation process for a new configuration.A configuration is required to setup a connection from a source to a target system.Setup Replication 2013 SAP AG or an SAP affiliate company. All rights reserved.Execute ReplicationMonitor ReplicationPublic20
Setup Replication – Specify Source / Target SystemIn the second step, you specify your source system. For anABAP based system you connect via RFC connection, for anon-ABAP system you connection via a 2nd DB Connection(SLT supports only SAP supported DB‘s).In the third step, you specify all relevant information about thetarget system.With DMIS SP2011 SP5, SLT allows replication to SAP HANAand SAP BW. Replication to ABAP based targets and SAPsupported DB are available project based.For a replication from an ABAP based system you canspecify if you would like to enable 1:N replication (AllowMultiple Usage) and to replicate from a single client only.Setup Replication 2013 SAP AG or an SAP affiliate company. All rights reserved.Execute ReplicationMonitor ReplicationPublic21
Setup Replication – Specify Transfer SettingsIn the fourth step, you specify the transfersettings.There are two options for the initial loadprocess - resource optimized orperformance optimized.The data class of the tablespace defineswhere SLT creates the logging tables onthe source system. Administrators canuse this option for better monitoring.In the section Job Options, you can definethe jobs that are allocated for thisconfiguration at SAP LT ReplicationServer.Setup Replication 2013 SAP AG or an SAP affiliate company. All rights reserved.Execute ReplicationMonitor ReplicationPublic22
Setup Replication – Review and Create / ConfirmationIn the fifth step you review all your settings and start the creation process of the configuration.The system displays a success message when the configuration has been created successfully.Setup Replication 2013 SAP AG or an SAP affiliate company. All rights reserved.Execute ReplicationMonitor ReplicationPublic23
Setup, Execution, and Monitoring of a ReplicationSAP LT Replication ServerSAP HANADBSAP HANAStudioIn-MemoryNew guided procedure to create aconfiguration between source andtarget system.Setup Replication 2013 SAP AG or an SAP affiliate company. All rights reserved.Start the replication for the relevanttables via SAP HANA Studio.Execute ReplicationMonitor ReplicationPublic24
Execute ReplicationSAP LT Replication Server is integrated into the HANA Modeler. Enter Data Provisioning to start the replication.1.Select source system2.Select the target schema (this isequal to your configuration name)3.Use button Load and / orReplicate to set up the datareplication4.Use button Stop Replication tofinish replication5.Use button Suspend to pausereplication6.Use button Resume to continuereplicationWait until the table DD02L, DD02T are in action Replicateand status In Process before you start your replication.Setup Replication 2013 SAP AG or an SAP affiliate company. All rights reserved.Execute ReplicationMonitor ReplicationPublic25
Execute Replication – Load / ReplicateDrop/create tableLoadLoad dataApplication tableSource systemSAP LT Replication ServerApplication tableSAP HANA systemDrop/create tableReplicateLoad dataApplication tableLogging tableReplicate dataApplication tableSAP LT Replication ServerSAP HANA systemDB triggerSource systemSetup Replication 2013 SAP AG or an SAP affiliate company. All rights reserved.Execute ReplicationMonitor ReplicationPublic26
Execute Replication – Stop / Suspend / ResumeStop data replicationStopApplication TableLogging TableDelete trigger & Log. tab.DB TriggerApplication tableSAP source systemSuspendSAP LT Replication ServerSAP HANA systemStop data replicationApplication table Logging tableApplication tableDB TriggerSAP source systemResumeSAP LT Replication ServerSAP HANA systemContinue data replicationApplication table Logging tableApplication tableDB TriggerSAP source systemSetup Replication 2013 SAP AG or an SAP affiliate company. All rights reserved.SAP LT Replication ServerExecute ReplicationSAP HANA systemMonitor ReplicationPublic27
Setup, Execution & Monitoring of a ReplicationSAP LT Replication ServerSAP HANADBSAP HANAStudioIn-MemoryNew guided procedure to create aconfiguration between source andtarget system.Setup Replication 2013 SAP AG or an SAP affiliate company. All rights reserved.Start the replication for the relevanttables via SAP HANA Studio.Execute ReplicationMonitor ReplicationPublic28
Monitor ReplicationSAP Replication Manager - Mobile Application for iPad/iPhoneGet an overview within the HANA Modeler.SAP Solution Manager 7.1 SP5Latency, jobs, connection and triggers details are available at theConfiguration and Monitoring Dashboard within SAP LTReplication Server.Setup Replication 2013 SAP AG or an SAP affiliate company. All rights reserved.Execute Replication Connectivity to source and target systemStatus of latency time last 24h replicationStatus of master and load jobsTrigger statusMonitor ReplicationPublic29
‘SLT’: Data and Structure Transformation Capabilities (1/3)Reduce Numberof Recordsby FilterDBConnectionRFC/DBConnectionSource systemSAP HANA systemSAP LT Replication Server i.e. Replicating certain data only Only data of specific years, departments, clients, etc. should be used in HANA.Conversionof ce systemSAP LT Replication Server of DataSAP HANA system i.e. To make certain fields anonymous i.e. HR reporting i.e. To fill initial fields i.e. To convert units or currency, and recalculate amounts and values using coded rulesAdjustment ofTarget Table Structures(i.e. extension/reduction/change of tablestructure and/or adjustment of technicaltable SettingDBConnectionRFC/DBConnectionSource systemSAP LT Replication ServerSAP HANA system i.e. Remove fields that are required in the HANA system i.e. additional fields are required (for example can be calculated/filled during load/replication) i.e. merging the same table (i.e. BSEG) from different systems (and create an additional field, for example a client field in order to avoid duplicate entries) 2013 SAP AG or an SAP affiliate company. All rights reserved.Public30
‘SLT’: Data and Structure Transformation Capabilities (2/3)Transaction IUUC REPL CONTENT2Select table1Select Configuration3 2013 SAP AG or an SAP affiliate company. All rights reserved.Public31
‘SLT’: Data and Structure Transformation Capabilities (3/3)UI to adjust target table structure and technical settingsThe transformation capabilitiesaccessible by using transactionIUUC REPL CONTENTare described in the Guide‘Advanced Replication Settings’attached toSAP Note 1733714. 2013 SAP AG or an SAP affiliate company. All rights reserved.Public32
Load Data from SAP ArchiveArchitecture and Key Building BlocksSelect replication configurationSelect Archive ObjectDefine Selection CriteriaSelect Relevanttable withincurrent archiveobjectNew with DMIS 2011 SP5: Exclude Archive Deletes from being replicated!Deletions of a table record due to an archiving process can be excluded from being replicated by the SAP LT Replication Server to the connected target systems of aparticular configuration. As a prerequisite the archive process needs to run on a dedicated, separate application server in the source system. No other data processing should take placeon this server, then. To accomplish, that these archiving deletions are ignored by the data transfer process the flag IGNO ARCHIVE DEL in table IUUC REPL CONFIG has to be set beforetriggers are created. During the archive process the server on which the archiving is running has to be defined in table IUUC RT PARAMS: Field IU PARAMETER „ARCHSERVER“, FieldIU VALUE Name of Application Server. 2013 SAP AG or an SAP affiliate company. All rights reserved.Public33
Monitoring with SAP Solution Manager 7.1 SP5 onwardsSLT related messages and alerts are now visible in SAP SolutionManager 7.1 SP5 onwardsSLT monitoring summarizes the following information perconfiguration: Connectivity to source and target system Status of latency time last 24h replication Status of master and load jobs Trigger status 2013 SAP AG or an SAP affiliate company. All rights reserved.Public34
SAP Replication Manager – Mobile ApplicationBenefits and PrerequisitesMonitorMonitor the data replication process and system parameters.ExecutionTrigger execution of important data replication functions.Higher FlexibilityApplication can be run anytime and anywhere from a mobile device which isconnected to the internet.Statistics ViewProvide an analytical perspective of real-time data replication in terms of latency.Infrastructure Requirements SUP2.1 Gateway (NW 7.02) (Minimal gateway) Backend IW BEP 200 ( SP2.0) DMIS MOB SP01 DMIS 2010 SP07 / DMIS 2011 SP02 SAP LT Replication Server should be a NW 700 EHP2 or higher 2013 SAP AG or an SAP affiliate company. All rights reserved.Public35
SLT und SAP HANA ‘in the Cloud’Architecture and Integration of SLT into the Cloud Infrastructure2 possible HANA Inbound Scenarios Tested @ SAP and live at SAP ITSLT located on the on-premise source site (possible)SLT located besides the SAP HANA system in theCloud (recommended)Managed Access Control:Via entries in table IUUC TAB ALLOWED in the SAP-basedsource systems you can control the access to table data. Onlypermitted data selections can be loaded/replicated into a cloudbased target system. 2013 SAP AG or an SAP affiliate company. All rights reserved.Public36
Real-time Data Replication into SAP BW (PSA)with SAP Landscape Transformation Replication ServerSAP LT Replication Server offers real-time data replication from ABAP-based and non-ABAP-based systems into SAP NW BW (7.0onwards). The data is transferred into Web Service DataSources in the Persistent Staging Area in SAP NW BW and can be processed via SAPBW Real-time Data Acquisition (RDA) Daemon into DataStore Objects (DSO) or master data tables (MD).Value PropositionSAP LT Replication Server transfers data in real-time into SAP NW BW, reducing the amount of overnight data uploads into your BW systems.With SAP LT Replication Server you can perform delta updates on BW DataSources without delta mechanisms, for ABAP-based systems aswell as non-ABAP based systems on all SAP supported DB versions (according to PAM).ScopeRecommended for simple tables (no join or transformation logic included) and data sources (extractors) withoutdelta mechanism and complex business logic. With SP5 not usable for Pool/Cluster tables (planned for next SPs). 2013 SAP AG or an SAP affiliate company. All rights reserved.Public37
Real-time Data Replication into SAP BW (PSA)Key Information SourcesInformation SourcesSAP LT Replication Server: vice.sap.com/instguides - SAP Components - SAP LT Replication ServerImportant SAP Note1826585 – SAP LT Replication Server for SAP BW (PSA) DMIS 2011 SP41908836 – SAP LT Replication Server for SAP BW (PSA) DMIS 2011 SP5Software RequirementsContact: Astrid.Tschense-Oesterle@sap.com (PM) 2013 SAP AG or an SAP affiliate company. All rights reserved.Public38
Operational Data Provisioning in Real-Timewith SAP Landscape Transformation Replication ServerSAP LT Replication Server acts as a provider for the Operational Data Provisioning Framework (ODP), enhancing this central data storagewith real-time capabilities. The ODP framework supports extraction and replication scenarios for various target SAP applications - assubscribers they retrieve the data from the delta queue and continue processing the data.Value PropositionWith the ODP/SAP LT Replication Server scenario replicated data is available in real-time in a „central place“ and can be consumed by multiplesubscribers over the ODP interface. The functionality is contained in the SAP Component DMIS 2011 SP5, available since 8/2013.This is a strategic enhancement of the SAP LT Replication Server functionality to offer real-time data provisioning to all SAP solutions (currentlyused by SAP NW BW and SAP BO Data Services).Scopecurrently restricted to ABAP-based systems, only simple tables, and extractors without delta mechanism and complex business logic. 2013 SAP AG or an SAP affiliate company. All rights reserved.Public39
Operational Data Provisioning in Real-TimeKey Information SourcesInformation SourcesSAP LT Replication Server: vice.sap.com/instguides - SAP Components - SAP LT Replication ServerImportant SAP Note1914764 – Operational Data Provisioning with SAP LT Replication ServerSoftware RequirementsContact: Astrid.Tschense-Oesterle@sap.com (PM) 2013 SAP AG or an SAP affiliate company. All rights reserved.Public40
Technical Prerequisites &Sizing
SAP LT Replication Server – Software Release StrategyWith HANA SPS05 & SPS06, two versions of SAP LT Replication Server are released SAP LT Replication Server 1.0 (based on Software Component Version DMIS 2010) SAP LT Replication Server 2.0 (based on Software Component Version DMIS 2011)Technically both DMIS versions include the same coding level (no need for an upgrade) DMIS 2011 SP02 and DMIS 2010 SP07 (see also SAP Note 1709225)DMIS 2011 SP03 and DMIS 2010 SP08 (see also SAP Note 1759156)DMIS 2011 SP04 and DMIS 2010 SP09 (see also SAP Note 1824710)DMIS 2011 SP5 (see also SAP Note 1882433): No equivalent DMIS 2010 SP version in parallel!Current status Since HANA SPS05, DMIS 2011 is released and recommended for all new installations (SAP LT Replication Server and SAP sourcesystems). SAP customers who run other DMIS-based applications (that require DMIS 2010 in the SAP source system) can use DMIS 2010 in the sourceand/or SLT system. See also SAP Note 1691975. For HANA customers using SLT with DMIS 2010 the switch (“technically” an upgrade) to DMIS 2011 will be a non-disruptive event. The future SP release cycles of DMIS 2011 and DMIS 2010 will be different!– DMIS 2011 SP5: No equivalent DMIS 2010 SP version in parallel !– Next DMIS 2010 SP10 planned to come in parallel to DMIS 2011 SP6 in Q1/2014– No further code-equal DMIS2010 after that only bug fixing 2013 SAP AG or an SAP affiliate company. All rights reserved.Public42
Technical Prerequisites and System Set-Up Informationfor SAP LT Replication Server (with SAP HANA 1.0 SPS05 or higher)RFC or DBConnectionSAP LT ReplicationServer *)SAP / non-SAPSource systemInstallation SAP: Respective DMIS 2010/2011version (DMIS 2011 SP2-5 or equiv.) ***) SAP: Minimum support pack level: SP07 **) non-SAP: no software installation requiredBasic Configuration Optional: define separate table spacefor logging tables SAP: Define RFC user with appropriateauthorization Non-SAP: Create DB user for Secondary DBconnectionSystem Requirements SAP: All ABAP-based SAP Systems starting withR/3 4.6C, all supported OS/DB’s platforms SAP & Non-SAP: OS/DB restrictions of relatedSAP NetWeaver stack apply (see athttp://service.sap.com/pam) 2013 SAP AG or an SAP affiliate company. All rights reserved.DBConnectionInstallation Add-on DMIS 2011 ***)(Latest support pack level: SP5)Basic Configuration SAP: Define RFC connection to source system Non-SAP: Define DB connection to source system Define DB connection to HANA system Define max. number of jobs to be used for data replicationSAP HANAsystemInstallation HANA SPS03-07: includes LT replicationfunctionality fully integrated into the UI of theHANA modelerBasic Configuration Create a DB user (if required)System Requirements According to Quick Sizing Ensure sufficient number of available background jobs!*)SAP LT Replication Server can run on any SAP system with SAP NetWeaver 7.02 ABAP stack or higher,for example on Solution Manager 7.1 or the source system – it does not have to be a separate SAP system!**) A few new SLT features available since HANA SPS05 may require DMIS 2010 SP09 / DMIS 2011 SP04***) SAP customers who run other DMIS-based applications can apply DMIS 2010 in the sour
SAP HANA Appliance SAP HANA DB In-Memory A io BI Client non-ABAP (SAP supported DBs) SAP Business Suite SAP Business Suite SAP Business Suite SAP Business Suite SAP Business Suite SAP Business Suite SAP Business Warehouse SAP HANA DB r In-Memory Source Systems SAP LT Replication Ser
SAP ERP SAP HANA SAP CRM SAP HANA SAP BW SAP HANA SAP Runs SAP Internal HANA adoption roadmap SAP HANA as side-by-side scenario SAP BW powered by SAP HANA SAP Business Suite powered by SAP HANA Simple Finance 1.0 2011 2013 2014 2015 Simple Finance 2.0 S/4 HANA SAP ERP sFin Add-On 2.0
SAP Certification Material www.SAPmaterials4u.com SAP Certification Material for SAP Aspirants at Low cost Home Home SAP Business Objects SAP BPC CPM SAP BPC 7.0 SAP EWM SAP GTS SAP Public Sector SAP Real Estate SAP FSCM SAP FI/CO SAP AC - FI/CO SAP BI 7.0 SAP CRM 5.0
SAP Business Suite SAP BW SAP Apps Partner Apps SAP HANA PLATFORM Planning and Calculation Engine Real-Time Replication Services Information Composer & Modeling Studio SAP UI HTML5 Mobile SAP BI 4 SAP ERP SAP CRM SAP SCM SAP PLM SAP SRM SAP Netweaver Predictive Analytics & Business Function Libraries In-Memory
SAP Master Data Governance SAP Information Steward SAP HANA smart data integration SAP Data Hub SAP Cloud Platform Big Data Services SAP HANA, platform edition SAP Vora Customer Experience IoT Workforce Engagement SAP Cloud for Customer SAP Commerce SAP Marketing SAP Asset Intelligence Network SAP Predictive Maintenance and Service SAP .
ALE/RFC Setup 88 SAP System Type 88 SAP IDoc Version 88 Program ID (SAP to e*Gate) 88 SAP Load Balancing Usage (e*Gate to SAP) 89 SAP Application Server (e*Gate to SAP) 89 SAP Router String (e*Gate to SAP) 90 SAP System Number (e*Gate to SAP) 90 SAP Gateway Ho
SAP Marketing shares SAP HANA with 1 SAP ERP or 1 SAP CRM system reading ERP and CRM data directly without replication SAP HANA AS ABAP Whitelist applicaiotn e.g. SAP BW (c) Side-by-side, sharing SAP HANA with BW Customers can extend SAP Marketing with BW data without replication -or extend BW reports with SAP Marketing data
Customer Roadmap to SAP Simple Finance - Example " Adopting SAP Simple Finance is a journey - start early" Side-by-side SAP HANA Acceleration SAP HANA accelerators, BW, BPC, GRC SAP Business Suite on SAP HANA SAP ERP on SAP HANA SAP ERP in SAP HANA Enterprise Cloud SAP Accounting Powered By SAP HANA Simple Finance add-on/
black holes limited their own growth by unleashing torrents of energy that drove away the surrounding gas (S&T: April 2005, page 42). These waves of unrest also dictated the ebb and flow of starbirth in the host galax-ies. This feedback process forged a close link between massive black holes and their surrounding stars. This view of abrupt but dazzling mayhem in major galaxies represents a .
