CAPTO-COMPATIBLE* HOLDERS - Techniksusa

2y ago
9 Views
2 Downloads
1.69 MB
10 Pages
Last View : 1m ago
Last Download : 2m ago
Upload by : Nixon Dill
Transcription

CAPTO-COMPATIBLE* HOLDERSTHE C4, C5, AND C6 HOLDERS YOU NEED - TECHNIKS CERTIFIED.ER Collet ChucksEnd Mill HoldersShrinkFITFace MillArborsTurning Tools & InsertsSlimFIT Holders*CAPTO IS A TRADEMARK OF SANDVIK AB AND USED FOR IDENTIFICATION ONLY.We stand behind all our products with our 100% Satisfaction Guarantee www.techniksusa.com153

CAPTO-COMPATIBLE* COLLET CHUCKSpg. 229pg. 236pg. 238FEATURES Balanced to 25,000 RPM at G2.5 Maximum T.I.R. 0.0001" measured from taperto collet pocket PowerCOAT Nut included and increasesholding power by 75%For turn/mill machines that accept "PSC" style toolholders.Coolant-thru is standard feature.d1d2l1C4 ER COLLET CHUCKSl1d1d2Max ShankWrenchC4 x ER16 - 70mm70mm28mm28mm10mm04609141.122.25.052C4 x ER25 - 52mm52mm42mm42mm16mm04615141.122.32.054C4 x ER32 - 54mm54mm50mm50mm20mm04616l1d1d2Max ShankWrenchPart No.Description141.122.16.070C5 ER COLLET CHUCKSPart No.Description142.122.16.100C5 x ER16 - 100mm100mm28mm28mm10mm04609142.122.25.055C5 x ER25 - 55mm55mm42mm42mm16mm04615142.122.32.057C5 x ER 32 - 57mm57mm50mm50mm20mm04616C6 ER COLLET CHUCKSl1d1d2Max ShankWrenchC6 x ER16 - 100mm100mm28mm28mm10mm04609143.122.25.060C6 x ER25 - 60mm60mm42mm42mm16mm04615143.122.32.070C6 x ER32 - 70mm70mm50mm50mm20mm04616143.122.40.065C6 x ER40 - 65mm65mm63mm63mm26mm04617143.123.08.600C6 x ER8M - 6" mini nut6".47".63".187"04620143.123.11.600C6 x ER11M - 6" mini nut6".75".79".275"04621143.123.16.600C6 x ER16M - 6" mini nut6".87".98".406"04622143.123.20.600C6 x ER20M - 6" mini nut6"1.10"1.26".512"04623Part No.Description143.122.16.100*CAPTO is a trademark of Sandvik AB and used for identification only.154Call 800.597.3921 or 317.803.8000 for a fast friendly quote. Email: info@techniksusa.com

pg. 229pg. 236CAPTO-COMPATIBLE* SLIMFIT CHUCKSpg. 238FEATURES .550" nose diameters.55" Balanced to 25,000 RPM at G2.5 "On-Size" noncollapsible colletsl1For turn/mill machines that accept "PSC" style toolholders.Coolant-thru is standard feature.C4 & C6 SLIMFIT COLLET CHUCKSl1DrawbarC4 x SBL 6 - 75mm75mmSBL-M6CT-20C6 x SBL 6 - 80mm80mmSBL-M6CT-20Part No.Description141.648.06.075143.648.06.080SLIMFIT COLLETSDrawbar - T M6 x 1.0Pd1DL1LPart No.Description18851-3/32SlimFIT 6 - 3/32" collet18851-7/64SlimFIT 6 - 7/64" collet18851-1/8SlimFIT 6 - 1/8" collet18851-9/64SlimFIT 6 - 9/64" collet18851-5/32SlimFIT 6 - 5/32" collet18851-11/64SlimFIT 6 - 11/64" collet18851-3/16SlimFIT 6 - 3/16" collet18851-13/64 SlimFIT 6 - 13/64" collet18851-7/32SLIMFIT EXTENSIONSSlimFIT 6 - 7/32" collet18851-15/64 SlimFIT 6 - 15/64" colletDLl1d118851-1/4SlimFIT 6 - 1/4" collet06032-3 1/2" x OLP6-3" extension1/2"3"1.89".4818851-02SlimFIT 6 - 2mm collet060321/2" x OLP6-5" extension1/2"5"1.89".4818851-03SlimFIT 6 - 3mm collet060341/2" x OLP6-6" extension1/2"6"1.89".4818851-04SlimFIT 6 - 4mm collet060385/8" x OLP6-5" extension5/8"5"1.89".4818851-05SlimFIT 6 - 5mm collet060405/8" x OLP6-6" extension5/8"6"1.89".4818851-05.5SlimFIT 6 - 5.5mm collet060425/8" x OLP6-8" extension5/8"8"1.89".4818851-06SlimFIT 6 - 6mm colletCollet Set18851-12IMSPart No.DescriptionNote: Extensions Fit 1/2" or 5/8" ToolholdersWe stand behind all our products with our 100% Satisfaction Guarantee www.techniksusa.com155

CAPTO-COMPATIBLE* ENDMILL HOLDERSpg. 229pg. 236pg. 238FEATURES Extends cutting tool life 60% Balanced to 15,000 RPM at G6.3 High precision bore (H5) is best in the industryl4l2d1For turn/mill machines that accept "PSC" style toolholders.Coolant-thru is standard feature.d2Tl5l1C4 ENDMILL HOLDERSl1l2l4l5d1d2TC4 x SLN 1/4" - C4 x SLN 5/16" - 6.197C4 x SLN 3/8" - 17C4 x SLN 1/2" - .61.217C4 x SLN 5/8" - d1d2TPart No.Description141.653.54.197C6 ENDMILL HOLDERSPart No.Description143.653.54.217C6 x SLN 1/4" - 217C6 x SLN 5/16" - 56.236C6 x SLN 3/8" - 236C6 x SLN 1/2" - 3.61.256C6 x SLN 5/8" - 64.256C6 x SLN 3/4" - .315C6 x SLN 1" - 354C6 x SLN 1-1/4" - O is a trademark of Sandvik AB and used for identification only.156Call 800.597.3921 or 317.803.8000 for a fast friendly quote. Email: info@techniksusa.com

pg. 229pg. 236CAPTO-COMPATIBLE* SHRINKFIT HOLDERSpg. 238FEATURESd3 Maximum T.I.R. only 0.0001"d1 d2T Balanced to 25,000 RPM at G2.510l2 Superior rigidity and holding powerl1C4 SHRINKFIT CHUCKSl1l2d1d2d3TCoolant Stop ScrewC4 x SF 1/4" - 2.95"2.95"1.41"1/4".83"1.06"M5 x .8P16080C-20141.651.55.295C4 x SF 5/16" - 2.95"2.95"1.41"5/16".83"1.06"M6 x 1.0P16081C-20141.651.56.295C4 x SF 3/8" - 2.95"2.95"1.61"3/8".95"1.26"M8 x 1.25P16082C-20141.651.58.295C4 x SF 1/2" - 2.95"2.95"1.81"1/2"1.10"1.34"M10 x 1.5P16083C-20141.651.61.315C4 x SF 5/8" - 3.15"3.15"1.93"5/8"1.06"1.34"M12 x 1.75P16085C-20l1l2d1d2d3TCoolant Stop ScrewPart No.Description141.651.54.295C5 SHRINKFIT CHUCKSPart No.Description142.651.52.315C5 x SF 1/8 - 80mm3.15"1.5"1/8".63".87"M6 x 1.0P16081C-20142.651.53.315C5 x SF 3/16 - 80mm3.15"1.5"3/16".63".87"M6 x 1.0P16081C-20142.651.54.315C5 x SF 1/4 - 80mm3.15"1.5"1/4".83"1.06"M5 x .8P16080C-20142.651.56.315C5 x SF 3/8 - 80mm3.15"2"3/8".95"1.26"M8 x 1.25P16082C-20142.651.58.315C5 x SF 1/2 - 80mm3.15"1.5"1/2"1.10"1.34"M10 x 1.5P16083C-20142.651.61.315C5 x SF 5/8 - 80mm3.15"1.75"5/8"1.06"1.34"M12 x 1.75P16085C-20142.651.64.315C5 x SF 3/4 - 80mm3.15"1.5"3/4"1.42"1.65"M16 x 2.0P16089C-20l1l2d1d2d3TCoolant Stop ScrewC6 SHRINKFIT CHUCKSPart No.Description143.651.52.300C6 x SF 1/8" - 3"3"1.77"1/8".36".64"M6 x 1.0P16081C-20143.651.53.300C6 x SF 3/16" - 3"3"1.77"3/16".43".70"M6 x 1.0P16081C-20143.651.54.315C6 x SF 1/4" - 3.15"3.15"1.41"1/4".83"1.06"M5 x .8P16080C-20143.651.55.315C6 x SF 5/16" - 3.15"3.15"1.41"5/16".83"1.06"M6 x 1.0P16081C-20143.651.56.315C6 x SF 3/8" - 3.15"3.15"1.61"3/8".95"1.26"M8 x 1.25P16082C-20143.651.58.315C6 x SF 1/2" - 3.15"3.15"1.81"1/2"1.10"1.34"M10 x 1.5P16083C-20143.651.61.335C6 x SF 5/8" - 3.35"3.35"1.93"5/8"1.06"1.34"M12 x 1.75P16085C-20143.651.64.335C6 x SF 3/4" - 3.35"3.35"2"3/4"1.26"1.65"M16 x 2.0P16089C-20143.651.68.354C6 x SF 1" - 3.54"3.54"2.24"1"1.73"2.08"M16 x 2.0P16089C-20143.651.72.374C6 x SF 1-1/4" - 3.74"3.74"2.4"1-1/4"1.73"2.08"M16 x 2.0P16089C-20*CAPTO is a trademark of Sandvik AB and used for identification only.We stand behind all our products with our 100% Satisfaction Guarantee www.techniksusa.com157

CAPTO-COMPATIBLE* FACE MILL ARBORSpg. 229pg. 236pg. 238FEATURES Compatible with all face mills H6 arbor tolerance for less chatter & better tool lifeK2d1d2l2l1C4, C5, C6 FACE MILL ARBORSl1l2d1d2k2C4 x FMA 3/4" - 1"1".69"3/4".88".314"142.151.68.157C5 x FMA 1" - 1.57"1.57".69"1"1.24".375"143.151.64.100C6 x FMA 3/4" - 1"1".69"3/4".88".314"143.151.68.200C6 x FMA 1" - 2"2".69"1"1.24".375"143.151.72.200C6 x FMA 1-1/4" - 2"2".69"1-1/4"1.614".5"Part No.Description141.151.64.100mTDSLl2LCOOLBLAST COOLANT ARBOR SCREWSPart No.DescriptionWF.C1-.75-1.75CoolBLAST arbor screw provides coolant path.Arbor SizeDLl1l2TSmCoolBLAST arbor screw CAS-A-.75 Smaller "D"3/4"5/8"1.375"1".36"3/8-24 UNF1/4".37"WF.C1-1-1.75CoolBLAST arbor screw 35CAS-A-1.00 Smaller "1.44".94".5"5/8"-18UNF5/16".236"WF.C1-1.25-1.75 CoolBLAST arbor screw 1-1/4"STANDARD ARBOR SCREWSPart No.DescriptionWF.75-1.75FMA arbor screw 3/4"WF1-1.75FMA arbor screw 1"WF1.25-1.75FMA arbor screw 1-1/4"Arbor -1/2"1.44".94".5"5/8"-18UNF5/16".236"*CAPTO is a trademark of Sandvik AB and used for identification only.158Call 800.597.3921 or 317.803.8000 for a fast friendly quote. Email: info@techniksusa.com

pg. 229pg. 236CAPTO-COMPATIBLE* TURNING TOOLSpg. 238d28 l15 d1DC6 MCLNPart No.Descriptionl1Dd1d2InsertClampShimScrewLock Pin143.475.12L.065C6 - MCLNL-DX1265mm63mm45mm31mmCN 43MC620CMS432MS630MLP46-A143.475.12R.065C6 - MCLNR-DX1265mm63mm45mm31mmCN 43MC620CMS432MS630MLP46-ACNMG INSERTS FOR NEGATIVE TURNING AND BORINGPart LT1000.047roughingP-M-K-S-HWe recommend LT1000 grade inserts formaximum insert performance. LT1000grade features an advanced PVD coatingthat is 14 microns thick and lasts 250%longer than other inserts.CNMGCNMM INSERTS FOR NEGATIVE TURNING AND BORINGPart mP-M-K-S-H.047medium-roughP-M-K-S-HCNMMCNMP INSERTS FOR NEGATIVE TURNING AND BORINGPart NLT1000.047medium-roughP-M-K-S-HCNMPCNGG INSERTS FOR ALUMINUM NEGATIVE TURNING AND BORINGPart .031generalNCNGG*CAPTO is a trademark of Sandvik AB and used for identification only.P steel, M stainless, K cast iron, S high temp alloys, H hardened material, N aluminum & alloysWe stand behind all our products with our 100% Satisfaction Guarantee www.techniksusa.com159

CAPTO-COMPATIBLE* TURNING TOOLSpg. 229pg. 236pg. 238FEATURES High accuracy for best repeatability Turning, boring, threading and groovingl1Dd1For turn/mill machines that accept"PSC" style toolholders.7 2 d2C6 MDJNPart No.Descriptionl1Dd1d2InsertClamp143.476.15L.075C6 - MDJNL-EX1575mm63mm45mm31mmDN 43MC622143.476.15R.075C6 - MDJNR-EX1575mm63mm45mm31mmDN 43MC622ShimScrewLock PinDMS442MS630MLP46L-ADMS442MS630MLP46L-Al1D55 C6 MDNNPart No.Description143.481.15N.100C6 - MDNNN-H15l1DInsertClampShimScrewLock Pin100mm63mmDN 43MC622DMS442MS625MLP46L-ADNMG AND DNGG INSERTS FOR NEGATIVE TURNING AND BORINGPart oughP-M-K-S-HWe recommend LT1000 grade inserts formaximum insert performance. LT1000grade features an advanced PVD coatingthat is 14 microns thick and lasts 250%longer than other inserts.DNMGDNGG*CAPTO is a trademark of Sandvik AB and used for identification only.P steel, M stainless, K cast iron, S high temp alloys, H hardened material, N aluminum & alloys160Call 800.597.3921 or 317.803.8000 for a fast friendly quote. Email: info@techniksusa.com

pg. 229pg. 236CAPTO-COMPATIBLE* TURNING TOOLSpg. 238FEATURES High accuracy for best repeatability Turning, boring, threading and groovingl1DFor turn/mill machines that accept"PSC" style toolholders.d15 5 d2C6 MWLNPart No.Descriptionl1Dd1d2InsertClampShimScrewLock Pin143.478.08L.065C6 - MWLNL-DX0865mm63mm45mm31mmWN 43MC620TMS432MS630MLP46L-A143.478.08R.065C6 - MWLNR-DX0865mm63mm45mm31mmWN 43MC620TMS432MS630MLP46L-AWNMG INSERTS FOR NEGATIVE TURNING AND BORINGPart 08026WNMG433-NNLT1000.047medium-roughP-M-K-S-HWe recommend LT1000 grade inserts formaximum insert performance. LT1000grade features an advanced PVD coatingthat is 14 microns thick and lasts 250%longer than other inserts.WNMGWNMP INSERTS FOR NEGATIVE TURNING AND BORINGPart 432-NNLT1000.031finish-mediumP-M-K-S-HWNMP*CAPTO is a trademark of Sandvik AB and used for identification only.P steel, M stainless, K cast iron, S high temp alloys, H hardened material, N aluminum & alloysWe stand behind all our products with our 100% Satisfaction Guarantee www.techniksusa.com161

CAPTO-COMPATIBLE* TURNING TOOLSpg. 229pg. 236pg. 238FEATURES High accuracy for best repeatability Turning, boring, threading and groovingd2l15 d1DFor turn/mill machines that accept"PSC" style toolholders.C6 MVLNPart No.Descriptionl1Dd1d2InsertClampShimScrewLock Pin143.479.16L.075C6 - MVLNL-EX1675mm63mm45mm31mmVN 33MC622VMS322MS630MLP34L-A143.479.16R.075C6 - MVLNR-EX1675mm63mm45mm31mmVN 33MC622VMS322MS630MLP34L-AVNMG INSERTS FOR NEGATIVE TURNING AND BORINGPart 0.031finish-medium P-M-K-S-H8608016VNMG332-NNLT1000.031finish-medium P-M-K-S-HWe recommend LT1000 grade inserts formaximum insert performance. LT1000grade features an advanced PVD coatingthat is 14 microns thick and lasts 250%longer than other inserts.VNMGVNGG INSERTS FOR ALUMINUM NEGATIVE TURNING AND BORINGPart NGG331-ALULT 05.016finishingN8607925VNGG332-ALULT 05.031finish-mediumN*CAPTO is a trademark of Sandvik AB and used for identification only.P steel, M stainless, K cast iron, S high temp alloys, H hardened material, N aluminum & alloys162Call 800.597.3921 or 317.803.8000 for a fast friendly quote. Email: info@techniksusa.comVNGG

Turning Tools & Inserts ShrinkFIT CAPTO-COMPATIBLE* HOLDERS THE C4, C5, AND C6 HOLDERS YOU NEED - TECHNIKS CERTIFIED. *CAPTO IS A TRADEMARK OF SANDVIK AB AND USED FOR IDENTIFICATION ONLY. 154 Call 800.597.3921 or 317.803.8000 for a fast friendly

Related Documents:

ff ˆ ff ’ . Separation3 on a HiTrap Q HP 1mL column (Sepharose High Performance resin) Separation3 on a HiTrap Capto Q ImpRes 1 mL column. 5 Guide to IEX resins for process development Capto S Capto Q Capto DEAE PreDictor Screening plates Capto S ImpAct Capto SP ImpRes

Capto SP ImpRes and Capto MMC ImpRes is supplied in 20% ethanol with 0.2 M sodium acetate. Capto Q ImpRes and Capto adhere ImpRes is supplied in 20% ethanol. Before packing, transfer the media to the packing solution as described in the packing instruction

Capto Q step and 25 mM phosphate, 150 mM NaCl, pH 6.3 for the Capto adhere ImpRes step. Capto Q in FT mode Capto Q was packed in a Tricorn 5/50 column (CV 1.1 mL, 5.6 cm bed height), which was connected to an ÄKTA system. The column was equilibrated with 7 CV of 25 mM sod

the high binding capacities of Capto S ImpAct (Fig 3 and 4). The results show that Capto S ImpAct is a useful tool for these challenges faced in today’s biopharmaceutical manufacturing. Table 2. Isoelectric point (pI) and aggregate content for MAbs used in the studies with Capto S

Polishing step Capto SP ImpRes Capture step Capto adhere Capture step Capto SP ImpRes-treatment. Chromatography solution . Formulation . Polishing step Capto MMC 18 . Design overview . Cell culture & harvest . Formulation . Supernatant of B.pertussis Cell paste of B.pertussis. Heat treat

Capto Q ImpRes Sepharose 4 Fast Flow 0.1 CV 39/57 LOD LOD LOD Capto Core 700 26 CV 65/100 LOD LOD LOD Polishing: Comparing size exclusion and Capto Core 700 Downstream Clarification Conc. and buffer exchange Capture Polishing Conc. and buffer

Capto ImpRes (40) Capto ImpAct (40) Sepharose Fast Flow (90) Capto (90) Anion exchanger Q (strong) ANX (weak) DEAE (weak) Cation exchanger SP (strong) CM (weak) How to choose media and column - IEX weak ion exchangers: capacity varies withpH s

TAMINCO GROUP NV Pantserschipstraat 207, 9000 Ghent, Belgium Enterprise number 0891.533.631 Offering of New Shares (with VVPR strips attached) and Existing Shares