Sandvik Grading Catalogue - Grade Control

back-blading capability thatis the only one of its kind in the marketplace

Carbide TipsCarbide TIPSInsert Carbide TipsInsert carbide tips are best suited for penetration applications where steel wash is not anissue. These tips are ideal for use in hard, high-impact conditions.0.602" (15.3 mm)0.602" (15.3 mm)0.907" (23.0 mm)0.907" (23.0 mm)NP13NP13CAP Carbide TipsCap carbide tips have a valve-seat braze joint for increased strength and shearresistance. The tips provide excellent penetration, and the large carbide shouldergives excellent protection against steel wash. These tips are best suited for use inSet o touthardclothesfor the next daymediumconditions.day0.788" (20.0 mm)0.473"(12.0 mm)0.945" (24.0 mm)0.638" (16.2 mm)0.567" (14.4 mm)0.638" (16.2 mm)0.571" (14.5 mm)1.142" (29.0 mm)1.110" (28.2 mm)0.760"(19.3 mm)0.669"(17.0 mm)1.412"(35.9 mm)1.299"(33.0 mm)0.928"(23.6 mm) NP701.300" (33.0 mm)0.945" (24.0 mm)NP23NP27NP01NP28NP560.899"(22.9 mm)0.918"(23.3 mm)0.665" (16.9 mm)NP20

ProductivitySquaredSandvik System 2000 is a high-tech road rehabilitation cuttingsystem ideal for maintaining rural roads (e.g. ice, dirt, gravel,hauling roads.) System 2000 increases productivity, essentiallyeliminating downtime. It works by utilizing a replaceableconical tool installed in a heat-treated adaptor board thatallows better wear resistance and improved cutting capabilityover conventional steel blades.In addition to the integral end protector—which alwaysleaves cutting edges straight—the latest innovation to theSystem 2000 is a unique patent-pending square washer thatfurther increases productivity.Benefits of Sandvik grading tools with NEW square washer: Pre-compressed retainer for easy installation Enhances tool rotation Eliminates washer rotation, preventing wear between washerand mating surface Provides support and stability to the pick with an extrudedcone that fits neatly in the bore of the adaptor board Patent-Pending Square WasherNow available with TriSpec ring to reduce body wash.Serves as a replaceable “armor plate” wear surfaceReplaceable square washers act as armor plate and allow tools to rotate freely.Without washers, material builds up, causes wear, and limits rotation.

SYSTEM 2000Sandvik System 2000 tools are available in shank diameter sizes from 19 mm to35 mm for use on motor graders for the road grading industry.System 2000These tools are manufactured globally, according to the highest quality standards.Now available with TriSpec ring to reduce body wash.

S19 SYSTEMS(Available only in Europe)STANDARD BOARDS* [1.50" (38.1 mm) Spacing – Angle 25º]BoltTOOLLENGTH HOLE capacityPART #61.5 cm (2 ft.) . . . . . . . 18 x 18 mm . . . . . 16 . . . . . . S1AW-1924-132591.5 cm (3 ft.) . . . . . . . 18 x 18 mm . . . . . 24 . . . . . . S1AW-1936-1325122.0 cm (4 ft.) . . . . . . 18 x 18 mm . . . . . 32 . . . . . . S1AW-1948-132519 mm Systems*Cannot work with H2/K2 toolsTruck BOARDS [1.50" (38.1 mm) Spacing – Angle 45º]BoltTOOLLENGTH HOLE capacity40.5 cm . . . . . . . . . . . .45.6 cm . . . . . . . . . . . .50.0 cm . . . . . . . . . . . .61.0 cm (2 ft.) . . . . . . .91.5 cm (3 ft.) . . . . . . .122.0 cm (4 ft.) . . . . . .181818181818xxxxxx181818181818mm . . . . .mm . . . . .mm . . . . .mm . . . . .mm . . . . .mm . . . . .10 . . . . . .12 . . . . . .13 . . . . . .16 . . . . . .24 . . . . . .32 . . . . . .PART 24-1345S1DW-1936-1345S1DW-1948-13451.5" (37 mm)EU SHIPPING INFORMATIONPiecesBoxesPiecesPer BoxPer Pallet Per Pallet50631.44[36.6 mm]3150K6LS-1945-01690.638" (16.2 mm)0.638" (16.2 mm)NEW0.665"(16.9 mm)gendintent-PK6LS-1945-286

1862, Sandvik is a high-technology engineering group and the world’s leading manufacturer of tungsten carbide tools for the construction, mining and drilling industries. We take special care in the manufacturing process to ensure that the cemented tungsten carbide in Sandvik’s tools