English Version Of DIN EN 10240 EN 10240 Supersedes DIN .
February 1998D EUTSCHE NORMInternal and/or external protective coatings for steel tubesSpecification for hot dip galvanized coatings appliedin automatic plantsEnglish version of DIN EN 10240ICS 23.040.10; 25.220.40; 77.140.75{EN 10240Supersedes DIN 2444,January 1984 edition.Descriptors: Coatings, steel pipes.Innere und/oder äußere Schutzüberzüge für Stahlrohre –Festlegungen für durch Schmelztauchverzinken in automatisiertenAnlagen hergestellte ÜberzügeEuropean Standard EN 10240 : 1997 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been prepared by ECISS/TC 29.The responsible German body involved in its preparation was the Normenausschuß Rohre, Rohrverbindungenund Rohrleitungen (Pipes, Pipe Joints and Pipelines Standards Committee).AmendmentsDIN 2444, January 1984 edition, has been superseded by the specifications of EN 10240.Previous editionsDIN 2444: 1963-03, 1972-08, 1978-07, 1984-01.EN comprises 17 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e. V., Berlin.Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).Ref. No. DIN EN 10240 : 1998-02English price group 11Sales No. 111107.98
EN 10240December 1997ICS 23.040.10; 25.220.40; 77.140.75Descriptors: Coatings, steel pipes.English versionInternal and/or external protective coatings for steel tubesSpecification for hot dip galvanized coatings applied in automatic plantsRevêtements intérieurs et/ouextérieurs des tubes en acier –Spécifications pour revêtements àchaud sur des lignes automatiquesInnere und/oder äußere Schutzüberzüge für Stahlrohre – Festlegungenfür durch Schmelztauchverzinken inautomatisierten Anlagen hergestellteÜberzügeThis European Standard was approved by CEN on 1997-08-09.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Central Secretariat has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.ÈÉËEuropean Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für NormungCentral Secretariat: rue de Stassart 36, B-1050 Brussels 1997. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN 10240 : 1997 E
Page 2EN 10240 : 1997
Page 3EN 10240 : 1997
Page 4EN 10240 : 1997
Page 5EN 10240 : 1997
Page 6EN 10240 : 1997
Page 7EN 10240 : 1997
Page 8EN 10240 : 1997
Page 9EN 10240 : 1997
Page 10EN 10240 : 1997
Page 11EN 10240 : 1997
Page 12EN 10240 : 1997
Page 13EN 10240 : 1997
Page 14EN 10240 : 1997
Page 15EN 10240 : 1997
Page 16EN 10240 : 1997
Page 17EN 10240 : 1997
DIN 2444, January 1984 edition, has been superseded by the specifications of EN 10240. Previous editions DIN 2444: 1963-03, 1972-08, 1978-07, 1984-01. Ref. No. DIN EN 10240 : 1998-02 English price group 11 Sales No. 1111 07.98 DEUTSCHE NORM February 1998 E
2012-up Honda Fit Double DIN or DIN with Pocket GM5205B 2010-up Chevrolet Cruz Double DIN or DIN with Pocket HA1714B 2012-up Honda CRV Double DIN or DIN with Pocket HA1715B 2011-up Honda Odyssey Double DIN or DIN with Pocket HD7000B 1996-2012 Harley Davidson dash kit and harness CR1293B 2011-up Jeep Cherokee/Dodge Durango Double DIN or DIN with .
The DIN Standards corresponding to the International Standards referred to in clause 2 and in the bibliog-raphy of the EN are as follows: ISO Standard DIN Standard ISO 225 DIN EN 20225 ISO 724 DIN ISO 724 ISO 898-1 DIN EN ISO 898-1 ISO 3269 DIN EN ISO 3269 ISO 3506-1 DIN EN ISO 3506-1 ISO 4042 DIN
1 750 V Gr.C 660 V Gr.C NFC DIN UL CSA ACD13-6 ACD23-6 BO3 10x3 mm BO6 15x6 mm SFB1 SFB2 SFB3 RC610 SPBO SPBO R 3 2 1 ACD13-6 (DIN 1 - DIN 3) ACD23-6 (DIN 2 - DIN 3) ACD13-6 (DIN 1 - DIN 3) BO3 BO6 10 x 3 6 x 6 15 x 6 X X X XX XX ACD23-6 (DIN 2 - DIN 3) Rail 35 x 7,5 x 1 PR3.Z2 Rail 35 x 15 x 2,3 PR4 Rail 35 x 15 x 1,5 PR5 Ra
SLIP-ON FLANGE ND 10 FOR ISO-PIPE DIN 2576 g. VLAKKE LASFLENS ND 10 VOOR DIN-BUIS DIN 2576 BRIDE PLATE À SOUDER PN 10 POUR TUBE DIN DIN 2576 FLANSCHE, GLATT ZUM SCHWEISSEN ND 10 FÜR DIN ROHR DIN 2576 SLIP-ON FLANGE ND 10 FOR DIN-PIPE DIN 2576 "All models, types, values, rates, dimensions, a.s.o. are subject to change, without notice" 173 6
DIN EN IS0 3098-0 DIN EN IS0 81 71 4-1 Amendments DIN 6784, February 1982 edition, has been superseded by the specifications of DIN IS0 13715. Previous editions DIN 6784: 1975-09, 1982-02. National Annex NA Standards referred to (and not included in Normative references) DIN 406-1 O DIN 406-1 1
DIN 1055 Einwirkungen auf Tragwerke DIN EN 1264 Fußbodenheizung, Systeme und Komponenten DIN 4108 Wärmeschutz im Hochbau DIN 4109 Schallschutz im Hochbau DIN 18195 Bauwerksabdichtungen DIN 18202 Toleranzen im Hochbau DIN 18353 VOB, Teil C: Allgemeine Technische Vorschriften f. Bauleistungen, Estricharbeiten
Eurocode 0 (DIN EN 1990), Eurocode 1 (DIN EN 1991), DIN EN 206-1/DIN 1045-2 und DIN EN 13670/DIN 1045-3 in der Kommentarspalte angegeben. Außerdem werden neue Regelungen und Formulierungen von DIN EN 1992-1-1 bei Bedarf zusätzlich kurz kommentiert. Ergänzt wird der Band durch einige Bemessungshilfsmittel. VII
DIN 17100: 1957-10, 1966-09, 1980-01; DIN 17103: 1989-10; DIN 17243: 1987-01; DIN 17280: 1985-07; DIN 17440: 1967-01, 1972-12, 1985-07, 1996-09; DIN EN 10222-1: 1998-09. National Annex NA Standard referred to (and not included in Normative references) DIN V 17006-100 Designati
