RULERS AND SCALES

2y ago
9 Views
2 Downloads
1.03 MB
23 Pages
Last View : 4m ago
Last Download : 2m ago
Upload by : Lee Brooke
Transcription

3.00RULERS AND SCALESINTERNATIONAL, INC.100 Ball St., P.O. Box 6849, Syracuse, NY 13217-6849Telephone: (315) 463-9261Fax: (315) 463-9034

RULERS AND SCALESTable of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Standard Rulers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Stazput Non-Skid Cork-Backed RulersZero CenteredSouthpaws (for left handers)Inch ScalesMetric and Inch ScalesArchitects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Printer Line Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Graphic Arts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Advertising AgencyArtist, Printers, etc.NewspaperSpecial Scales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Horizontal scales reading left to rightHorizontal scales reading right to leftVertical scales reading bottom to topVertical scales reading to to bottomZero Centered scalesEngineers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Business Forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Graphic Arts Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22INTERNATIONAL, INC.100 Ball St., P.O. Box 6849, Syracuse, NY 13217-6849Telephone: (315) 463-9261Fax: (315) 463-9034

General InformationManufacturers of high quality stainless steel rulersGEI INTERNATIONAL, INC.GEI International, Inc. (formerly Gaebel Enterprises, Inc.) was incorporated in1961 with the sole purpose of manufacturing high quality stainless steel rulersand measuring devices. A propriety manufacturing process was developedutilizing a combination of photo-engraving, etching and engraving to produceconsistent high quality measuring devices.Custom Manufactured Rulers, Scales, Gauges, Etc.Special Rulers and ScalesMeticulous attention to detailManufacture of Stainless Steel RulersAll of the stainless steel rulers in this catalog without exception aremanufactured from raw stainless steel in the 8,000 square foot facility of GEIInternational, Inc., on Ball Street in East Syracuse, New York, USA.All of the rulers are manufactured from the finest quality stainless steel whichis suitably tempered for use as rulers. The stainless steel used is durable,long-lasting and will not rust. All graduations, markings and graphics on therulers are permanently etched and black-filled for legibility. The markings willnot rub-off and will remain readable for the life of the ruler. The GEI manufacturing process allows for repeatability and accuracy. All production mastersfor ruler manufacturing are digitally produced by computers for a high degreeof repeatability and consistency.The GEI ruler manufacturing process is efficient and flexible and allows us tocustom manufacture special scales and rulers and other items in small orlarge quantities at economical prices. We can provide private label and brandlabel products to your or our specifications. We can work from either a simpledescription of a ruler or measuring scale and design a custom product for yourneeds. Alternatively we can work from detailed engineering drawings andblueprints or actual product samples. Design and set-up costs are surprisinglyeconomical, it is possible for you to get exactly the item that you require.ImprintingGEI International manufactures a wide variety of rulers with custom imprintsand company logos for promotional use, our standard range of theseproducts is shown on pages 23 to 28 of this catalog. Most of our other rulersshown in this catalog are also available custom imprinted, contact us withyour requirements for further information.All custom imprinted stainless steel rulers are specially manufactured and allimprints are permanently etched for durability and long life and will not rub offas do silk-screened imprints.Special and Custom ManufacturedProducts and ServicesGEI International, Inc. is a manufacturer of etched stainless steel products andhas the ability to design and manufacture a wide variety of different productsincluding rulers, scales, gauges, nameplates, etc. A small sampling of some ofthe special products we have made in the past are shown in the photographabove. Special products to your or our design can be manufactured in small orlarge quantities at reasonable prices. Items for inclusion in or the completion ofother products are manufactured in addition to complete items such as rulers,gauges, etc. All manufacturing operations are performed by GEI from design toproduct completion in our factory in East Syracuse, New York, USA.If you have a product, design or an idea for a new product please contact usand we can quickly provide a price quotation and delivery schedule.Custom Punching of RulersQuality ControlGEI International, Inc. controls and performs all manufacturing operationsfrom raw stainless steel to finished rulers in house. Each manufacturingoperation involves quality control checks and all products are inspected priorto shipment. Stainless steel rulers provide an accuracy and stability notpossible in rulers and measuring scales manufactured from wood, plastic,aluminum, etc.Certification and Certificatesof CalibrationMany quality control programs such as the ISO-9000 require certificates ofcalibrations or certifications of accuracy for measuring scales and rulerswhich are used in manufacturing and other processes. We are able to offer inmost cases the required certificates of certification and calibration, withtraceability to known and accepted national standards.Please contact us with your requirements and we will provide completedetails together with prices of the programs we are able to offer.2TABLE OF CONTENTSStandard Rulers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7Architects Rulers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Construction Rulers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Engineers Rulers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Graphic Arts Rulers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-15Printers Line Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9Business Form Rulers . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21Special Scales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17Custom Imprinted Rulers . . . . . . . . . . . . . . . . . . . . . . . 23-28Proportion Calculators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Copyright 1994 by GEI International, Inc. All international rights reserved. Any reproduction without our prior consent is prohibited.PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Standard RulersStainless steel with etched black epoxy paint filled scalesReference Chart/RulerA combination ruler and a handy two sidedreference chart. The chart is 7" long, 1-1/4"wide and 0.020" (0.5mm) thick. The rulerscale is 6" long with a smallest graduationof 1/64". The front lists the decimalequivalents of fractional inches and theback contains charts and formulas listingthe tap and drill sizes for U.N.F., U.N.C.,Metric, ISO and American Standard PipeSizes.Model No.: 2013A-07A6" Pocket RulersPocket rulers, both single and double sidedwith sliding combination clips and depthgauges, except letter E. (Model No.:2012A-06A) which has no clip. All rulers are0.020" (0.5mm) thick and 6" long. Rulerwidth is 1/2" (12.7mm) except letters F andG (Model numbers 2015A-06A and 2017A06A) which are 1/4" wide (6.4mm).An optional 1/2" wide (12.7mm) grainedvinyl case letter H, (Model number RZN0004A) is available for all rulers.32ndAmmDecimal Equivalents of Fractional Inches on BackmmB32ndMetric Equivalents of Fractional Inches on BackKeyABCDEFGHModel 15A-06A2017A-06ARZN-0004APrice32ndC64thDecimal Equivalents of Fractional Inches on Back0.5mmDmmPlain BackmmE16thPlain BackFG32nd64thPlain Back16thmmPlain BackHOptional Grained Vinyl Case for the AboveTo order, call: (315) 463-9261 Fax: (315) 463-9034 orsee page 29 for information3

Standard RulersStainless steel with etched black epoxy paint filled scalesStazput Non-Skid Cork-Backed RulersAll these rulers are manufactured from 0.020" (0.5mm) thickstainless steel with etched black epoxy paint filled scales, anda cork backing to prevent skidding and slippage and to enablethe rulers to be used for inking. Rulers are 1-1/8" (28.6mm)wide with rounded corners and a 1/4" (6.4mm) diameterhanging hole.NOTE: 2001 Series are 1-1/4" wide (31.8mm) and have squareflush ends.Regular100 SeriesInch scales on the top and bottom edges in 1/2", 1/4", 1/8", 1/16" and1/32". NOTE: 1/32" only on the first 1" and not on the 136SR-36A.Model No. 106SR-06A 109SR-09A 112SR-12A 115SR-15A 118SR-18A 124SR-24A 136SR-36ALength6"9"12"15"18"24"36"Price200 SeriesInch scales on the top edge in 1/2", 1/4", 1/8" and 1/16" and millimeterscale on the bottom edge.Model No. 206SR-06A 209SR-09A 212SR-12A 215SR-15A 218SR-18A 224SR-24A 230SR-30A 236SR-36ALength6"9"12"15"18"24"30"36"Price300 SeriesMillimeter scale on the top edge and millimeter scale in 1/2mm on thebottom edge.Model No. 315SR-15A 330SR-30A 345SR-45A 360SR-60A 375SR-75A e2001 SeriesInch scale on the top edge in 1/2", 1/4", 18" and 1/16" and a pica scale in1/2 pica on the bottom edge.Model No. 2001R-12ALength2001R-18A 2001R-24A 2001R-36A12"18"24"36"PriceZero Centered100ZC SeriesInch scales on the top and bottom edges in 1/2", 1/4", 1/8", and 1/16".Model No. 106ZC-06A 109ZC-09A 112ZC-12A 115ZC-15A 6"Price200ZC SeriesInch scales on the top edge in 1/2", 1/4", 1/8" and 1/16" and millimeterscale on the bottom edge.Model No.Length206ZC-06A209ZC-09A6"9"212ZC-12A 215ZC-15A12"15"218ZC-18A18"224ZC-24A 236ZC-36A24"36"PriceSouthpaws – For Left HandersModel 2002R-12AA 12" ruler designed for left handed people Scales read right to left. Inchscale on the top edge in 1/2", 1/4", 1/8" and 1/16" and millimeter scale onthe bottom edge.12 "Length, Model No.: 2002R-12A4To order, call: (315) 463-9261 Fax: (315) 463-9034 orsee page 29 for information.

Standard RulersStainless steel with etched black epoxy paint filled scalesInch ScalesModel 2000Single sided rulers 1-1/4" (31.8mm) wide and 0.032" (0.8mm) thick. Inchscales on the front top and bottom edges in 1/2", 1/4", 1/8" and 1/16". Theback of the ruler lists the decimal equivalents of fractions. Available withleft end flush and right end rounded.Length12"18"Model No. 2000R-12A24"2000R-18A 2000R-24APriceModel 1061Two sided rulers, 1" (25.4mm) wide and 0.032" (0.8mm) thick. Inch scalein 1/8", 1/16", 1/32" and 1/64" numbered in 1/64" on the front top edge,inch scale in 1/8", 1/16" and 1/32" numbered in 1/32" on the front bottomedge, inch scale in 1/8 and 1/16" numbered in 1/8" on the back top edgeand an inch scale in 1/8" numbered in 1/8" on the back bottom edge. Bothends flush.Length6"Model No.12"18"24"36"1061A-06A 1061A-12A 1061A-18A 1061A-24A 1061A-36APriceModel 1060Two sided rulers 1" (25.4mm) wide and 0.032" (0.8mm) thick. Inch scale in1/2", 1/4", 1/8" and 1/16" on the front top edge. Inch scale in 1/10 and1/100" (actually 1/50" numbered in 1/100") on the front bottom edge. Inchscale in 1/4", 1/8", 1/16" and 1/32" numbered in 1/32" on the back top edgeand an inch scale in 1/4", 1/8", 1/16", 1/32" and 1/64" numbered in 1/64" onthe back bottom edge. Rulers are available with left end flush and right endrounded.24" Length, Model No.: 1060A-24AModel 1057Single sided rulers 7/8" (22.2mm) wide and 0.020" (0.5mm) thick. Inch scalein 1/2", 1/4", 1/8" and 1/16" on the top edge and an inch scale in 1/2", 1/4",1/8", 1/16" and 1/32" on the bottom edge. Subzero scales on both edges,one inch long, in 1/8" and 1/16" numbered in odd 1/32" on the top edge andin 1/8", 1/16" and 1/32" numbered in odd 1/64" on the bottom edge.Length12"Model No. 1057A-12A24"1057A-24APriceModel 1065A single sided ruler 3/4" (19.1mm) wide and 0.032" (0.8mm) thick. Inchscales only on the top edge in 1/2", 1/4", 1/8", 1/16" and 1/32" numbered in1/4". Subzero inch scale, one inch in 1/2", 1/4", 1/8", 1/16", 1/32" and 1/64"numbered in 1/8". Rounded both ends.24" Length. Model No.: 1065A-24AModel 1063Two sided rulers 1" (25.4mm) wide and 0.032" (0.8mm) thick. All scalesare zero centered. Inch scale in 1/8", 1/16", 1/32" and 1/64" numbered in1/64" every 1/8" on the front top edge. Inch scale in 1/8", 1/16" and 1/32"numbered in 1/32" every 1/8" on the front bottom edge. Inch scale in 1/8"and 1/16" numbered in 1/8" on the back top edge and an inch scale in 1/8"numbered in 1/8" on the back bottom edge. Both ends rounded.Length12"Model No. 1063A-12A18"1063A-18A24"36"1063A-24A 1063A-36APriceTo order, call: (315) 463-9261 Fax: (315) 463-9034 orsee page 29 for information5

Standard RulersStainless steel with etched black epoxy paint filled scalesMetric and Inch ScalesModel 1055 and 2009A handy two sided ruler 6" (152.4mm) long, 1/2" (12.7mm) wide and 0.020"(0.50mm) thick with an inch scale on the top edge in 1/2", 1/4", 1/8",1/16"and 1/32" and a centimeter scale in millimeters on the bottom edge. Theback of the ruler lists the decimal equivalents of fractions. The left end ofthe ruler is flush ended and the right is rounded. This ruler is suppliedcomplete with a clip/combination T-Square and depth gauge.6" Length, Model No.: 1055A-06AAlso available with an inch scale in 1/2", 1/4", 1/8", 1/16", 1/32" and 1/64"on the front bottom edge.6" Length, Model No.: 2009A-06AOptional 1/2" vinyl case is available. Model No.: RZN-0004AModel 1086Two sided rulers 1-1/4" (31.8mm) wide and 0.032" (0.8mm) thick. Inchscale in 1/2", 1/4", 1/16" and 1/32" on the front top edge, millimeter scale onthe front bottom edge, inch scale in 1/2", 1/10" and 1/20" (only the first 3" in1/20") on the back top edge and an inch scale in 1/2", 1/6" and 1/12" on theback bottom edge. Both ends rounded.24" Length, Model No.: 1086A-24A36" Length, Model No.: 1086R-36AModel 0812Two sided rulers 1-1/8" (28.6mm) wide and 0.032" (0.8mm) thick. Inchscale in 1/2, 1/10", 1/20", 1/50" and 1/100" (1/20" only for the first 3", 1/50"only between 3" and 4" and 1/20" and 1/100" only between 4" and 5") onthe front top edge. Inch scale in 1/2", 1/4", 1/12", 1/24" and 1/96" (1/24"only for the first 5", 1/48" only between 3" and 4" and 1/96" only between 4"and 5") on the front bottom edge, centimeter scale in mm and 1/2mm(1/2mm only for the first 10 cm) on the back top edge and an inch scale in1/2", 1/4", 1/16", 1/32" and 1/64" (1/32" only for first 4", 1/64" only between3" and 4") on the back bottom edge. The ruler is available with the left endflush and right end rounded.12" Length, Model No.: 0812R-12AModel 0339A single sided meter stick 1-1/4" (31.8mm) wide and 0.032" (0.8mm) thick.The top edge is a millimeter scale and the bottom edge is an inch scale in1/2", 1/4", 1/8", 1/16" and 1/32" (1/32" only for the first 3"). Both ends flush.1000mm Length, Model No.: 0339A-10AModel 2006Single sided rulers 1" (25.4mm) wide and 0.032" (0.8mm) thick. Millimeterscale on the top edge and a millimeter scale in 1/2mm on the bottom edge.Rulers are available with the left end flush and right end rounded.300mm Length, Model No.: 2006R-30AModel 1058A two sided ruler 1" (25.4mm) wide and 0.020" (0.5mm) thick. Inch scale in1/2", 1/4", 1/8" and 1/16" on the front top edge. Inch scale in 1/2", 1/4", 1/8",1/16" and 1/32" on the front bottom edge. Millimeter scale on the back topedge and an inch scale in 1/2" and 1/10" on the back bottom edge. One inchsubzero scales on the front top edge in 1/16" and 1/32" numbered in odd1/32", on the front bottom edge 1/32" and 1/64" numbered in odd 1/64", andon the back bottom edge 1/50" numbered in 1/100". Rounded both ends.Length12"Model No. 1058A-12A18"24"1058A-18A36"1058A-24A 1058A-36APrice6ToTo order,order, call:call: (315) 463-9261 Fax: (315) 463-9034 ororseesee pagepage 2929 forfor information.information

Standard RulersStainless steel with etched black epoxy paint filled scalesMetric and Inch ScalesModel 1059A two sided ruler 1" (25.4mm) wide and 0.020" (0.50mm) thick. Inch scalein 1/2", 1/4", 1/8" and 1/16" on the front top edge. Inch scale in 1/2", 1/4",1/8", 1/16" and 1/32" on the front bottom edge, millimeter scale on theback top edge and an inch scale in 1/2", 1/10" and 1/50" on the backbottom edge. One inch long subzero scales on the front top edge in 1/16"and 1/32" numbered in odd 1/32", on the front bottom edge in 1/32" and1/64", numbered in odd 1/64", and on the back bottom edge in 1/100"numbered every ten 1/100". Rounded both ends.24" Length, Model No.: 1059A-24AModel 1062A two sided ruler 1-1/4" (31.8mm) wide and 0.032" (0.8mm,) thick.Millimeter scale with zero center on the front top edge, centimeter scale in1/2cm on the front bottom edge, millimeter scale on the back top edgeand millimeter scale in 1/2mm on the back bottom edge. Rounded on bothends.24" Length, Model No.: 1062A-60AArchitectsStainless steel with etched black epoxy paint filled scalesModel 0400Two sided rulers 1-1/4" (31.8mm) wide and 0.032" (0.8mm) thick. Footscale, 1/4" 1 foot and 1/8" 1 foot both with subzero scales for theequivalent of 1 foot reading in 1" for 1/4" 1 foot, and 2" for 1/8" 1 footon the top front edge. Foot scale, 1" 1 foot and 1/2" 1 foot both withsubzero scales for the equivalent of 1 foot reading in 1/4" for 1" 1 footand 1/2" for 1" 1/2" foot scale on the front bottom edge. Foot scale 3" 1 foot and 1-1/2" 1 foot both with subzero scales for the equivalent of 1foot reading in 1/8" for 3" 2 foot scale and 1/4" 1 foot for 1-1/2" 1 footscale on the back top edge. Foot scale 3/4" 1 foot and 3/8" 1 foot bothwith subzero scales for the equivalent of 1 foot reading in 1/2" for 3/4" 1foot scale and 1" for 3/8" 1 foot scale on the back bottom edge. Bothends rounded.Length6"Model No. 0406R-06A12"18"24"36"0412R-12A 0418R-18A 0424R-24A 0436R-36APriceModel 1036A two sided ruler 1-1/2" (38.1mm) wide and 0.032" (0.8mm) thick. 1/2 upinch scale (1" actually equals 1-1/2") in 1/2", 1/4", 1/8" and 1/16" on thefront top edge. Inch scale in 1/2" and 1/10" on the front bottom edge, zerocenter (with punched hole) 1/2 off scale (1" actually equals 1/2") in 1/2",1/4" and 1/8" on the back top edge and an inch scale in 1/2" and 1/12"numbered in even 1/12" on the back bottom edge. Both ends rounded.24" Length, Model No.: 1036R-24A36" Length, Model No.: 1036R-36AConstructionStainless steel with etched black epoxy paint filled scalesModel 0912A single sided ruler 1-1/4" (31.8mm) wide and 0.032" (0.8mm) thick. Footscale 1/8" 1 foot with studs marked for 16" centers on the top edge andfoot scale 1/4" 1 foot with studs marked for 16" centers on the bottomedge. Both ends rounded. Ruler may be used to calculate the number ofstuds in a building for estimating or other purposes.12" Length, Model No.: 0912R-12AToTo order,order, call:call: (315) 463-9261 Fax: (315) 463-9034 ororseesee pagepage 2929 forfor information.information7

Printers Line GaugesEtched stainless steel scalesPrinters line gauges, also known as pica poles andhook rulers, were originally developed and used forsetting metal type by hand. Over the years due to theconvenience and unique shape of the line gauge it hasbecome a versatile scale for a multitude of uses in theprinting, graphic arts and other industries.All scales read vertically from top to bottom. Every linegauge is individually registered to insure accuratemeasurements from the hook (a zero register line isetched on each scale to provide an easy reference asto whether the hook is in registration). Each line gaugehas up to six scales, one, two or three on the front andone, two or three on the back. (Note: 1116, 1117, and1121 are single sided.)The line gauges are manufactured with etched blackepoxy paint filled scales. Gauges are 0.032" (0.8mm)thick and manufactured from 301 stainless steel. Linegauges are available in lengths from 12" to 24". All are13/16" (20.6mm) wide and feature a 1/4" hanginghole. The end of the line gauges are rounded forsafety and ease of carrying in the pocket.FULL GAUGEAll gauges shown below and opposite are this shape.110111021103110410 Point and Inches6 and 12 Point and Points1105Inches and Millimeters6 and 12 Point and Points6 and 12 PointsMillimeters and Agates6 and 12 Point and PointMillimeters and Inches6 and 12 Point and InchesBoth Sides are the SameLength12"18"24"Model 8"Model No.RulerPrice1102A-12A1102A-18ALength12"Model No.RulerPrice1103A-12ALength12"18"24"Model 8"24"Model 08110911106 and 12 Point and Inches6 and 12 Point and Agates6 and 12 Point and 8 PointInches and 10 Point6 and 12 PointInchesPicas and InchesCiceros, cm, mmPicas and Inchescm, mm, AgatesLength12"18"24"8Model 8"24"Model 8"24"Model 8"24"Model No.RulerPrice1109A-12A1109A-18A1109A-24ALengthToTo order,order, call:call: (315) 463-9261 Fax: (315) 463-9034 ororseesee pagepage 2929 forfor information.information12"18"24"Model No.RulerPrice1110A-12A1110A-18A1110A-24A

Printers Line GaugesPrinters line gauges, also known as pica poles andhook rulers, were originally developed and used forsetting metal type by hand. Over the years due to theconvenience and unique shape of the line gauge it hasbecome a versatile scale for a multitude of uses in theprinting, graphic arts and other industries.All scales read vertically from top to bottom. Every linegauge is individually registered to insure accuratemeasurements from the hook (a zero register line isetched on each scale to provide an easy reference asto whether the hook is in registration). Each line gaugeEtched stainless steel scaleshas up to six scales, one, two or three on the front andone, two or three on the back. (Note: 1116, 1117, and1121 are single sided.)The line gauges are manufactured with etched blackepoxy paint filled scales. Gauges are 0.032" (0.8mm)thick and manufactured from 301 stainless steel. Linegauges are available in lengths from 12" to 24". All are13/16" (20.6mm) wide and feature a 1/4" hanginghole. The end of the line gauges are rounded forsafety and ease of carrying in the pocket.FULL GAUGEAll gauges shown below and opposite are this shape.11111112Length12"18"24"Model 8"24"11176 & 12 Point, Agates, InchesLength12"18"24"Model No.RulerPrice1117A-12A1117A-18A1117A-24AModel 4"1118Model No.RulerPrice1113A-12A1113A-24A12"18"24"Model No.RulerPrice1118A-12A1118A-18A1118A-24A111511165 Point, Inches & 7 Point,9 Point, Inches & 11 Point6 &12 Point, Inches, AgatesLength12"18"24"Length12"18"Model No.RulerPrice1119A-12A1119A-18AModel 4"Model l 22Picas and InchesInches (1/6" and 1/10")2 & 12 Point, Agates, InchesInches (1/32 & 1/15)Millimeters & Inches11196 & 12 Point, Agates, Inches Inches (1/6" and 1/10")Millimeters and PointsMillimeters and InchesLength1114Inches, 2 and 12 Point8 Point and 10 Point1113Inches and AgatesMillimeters and Inches6 and 12 Point and Inches6 and 12 Point and Points 6 and 12 Point and Agates8 Point and 10 PointLength12"18"24"Model 8"24"Model No.RulerPrice1121A-12A1121A-18A1121A-24AToTo order,order, call:call: (315) 463-9261 Fax: (315) 463-9034 ororseesee pagepage 2929 forfor information.informationLength12"24"Model No.RulerPrice1122A-12A1122A-24A9

Graphic ArtsStainless steel with etched black epoxy paint filled scalesAdvertising AgencyModel 1041A two sided ruler 1-1/4" (31.8mm) wide and 0.032" (0.8mm) thick. Inchscale in 1/2", 1/4", 1/8" and 1/16" on the front top edge and a pica scale in1/2 pica on the front bottom edge, in the middle of the front are typewriterscales for pica in 10 C.P.I. and elite in 12 C.P.I., a type point table withC.P.I. and lines per inch of depth. An 8 point and 10 point scale on the backtop edge and an agate scale on the back bottom edge. The middle of theback is etched with 39 proof readers’ marks. Available with left end flushand right end rounded18" Length, Model No.: 1041R-18AModel 1033A one sided ruler 1-1/4" (31.8mm) wide and 0.032" (0.8mm) thick. Inchscale in 1/2", 1/4", 1/8" and 1/16" on the top edge and an inch scale in 1/2",1/4", 1/8", 1/16" and 1/32" on the bottom edge. All scales are zero centered.Length12"Model No. 1033A-12A18"1033A-18A24"36"1033A-24A 1033A-36A48"1033A-48APriceModel 1034A two sided centering ruler 1-1/4" (31.8mm) wide and 0.032" (0.8mm)thick. Inch scale on the front top edge in 1/4", 1/8" and 1/16", zero centeredinch scale on the front bottom edge in 1/4", 1/8" and 1/16", millimeter scaleon the back top edge and a zero centered millimeter scale on the backbottom edge. Both ends rounded.Length18"Model No. 1034R-18A24"36"1034R-24A 1034R-36APriceModel 1035A one sided centering ruler 1-1/4" (31.8mm) wide and 0.032" (0.8mm) thick.Zero centered 1/2 inch scale on the top edge (1" reading equals 1/2") in 1/2",1/4" and 1/8". Even inches are displayed in triangles for easy reading. Inchscale in 1/2", 1/6" and 1/12" on the bottom edge numbered in even 1/12". Inchscale in 1/2" and 1/10" on the middle of the ruler. Both ends are rounded.18" Length, Model No.: 1035R-18A24" Length, Model No.: 1035R-24AModel 1036A two sided centering ruler 1-1/2" (38.1mm) wide and 0.032" (0.8mm)thick. 1/2 up inch scale (1" actually equals 1-1/2") in 1/2", 1/4", 1/8" and1/16" on the top front edge. Inch scale in1/2" and 1/10" on the front bottomedge, zero center (with punched hole) 1/2 off scale (1"actually equals 1/2")in 1/2", 1/4" and 1/8" on the back top edge and an inch scale in 1/2" and1/12" numbered in even 1/12" on the back bottom edge. Both endsrounded.24" Length, Model No.: 1036R-24A36" Length, Model No.: 1036R-36AModel 1037A two sided Ad Artists ruler 1-1/2" (38.1mm) wide and 0.032" (0.8mm) thick.Scale is the same as the Model 1036 above except the scale on the backtop edge is in actual inches in 1/2", 1/4", 1/8" and 1/16". Both ends rounded.24" Length, Model No.: 1037R-24AModel 1038A two sided ruler 1-1/2" (38.1mm) wide and 0.032" (0.8mm) thick. All scalesare zero centered with a hole punched at zero. Pica scale in 1/2 pica on thetop front edge, inch scale in 1/2" and 1/10" on the front bottom edge, and aninch scale in 1/2", 1/4", 1/8" and 1/16" on Length24"36"the back top edge and an inch scale in Model No. 1038R-24A 1038R-36A1/2", 1/4" and 1/12" numbered in even1/12" on the back bottom edge. Both Priceends rounded.10

Graphic ArtsStainless steel with etched black epoxy paint filled scalesAdvertising AgencyModel 1063Two sided rulers, 1" (25.4mm) wide and 0.032" (0.8mm) thick. All scalesare zero centered. Inch scale in 1/8", 1/16", 1/32" and 1/64" on the front topedge, inch scale in 1/8", 1/16" and 1/32" on the front bottom edge, inchscale in 1/8" and 1/16" (numbered every 1/8" in fractional inches) on theback top edge, and an inch scale in 1/8" (numbered every 1/8" in fractionalinches) on the back bottom edge. Both ends rounded.Length12"Model No. 1063A-12A18"1063A-18A24"36"1063A-24A 1063A-36APriceModel 1039A single sided ruler 1-1/8" (28.6mm) wide and 0.032" (0.8mm) thick. Allscales are zero centered, millimeter scale on the top edge and an inchscale in 1/2", 1/4", 1/8" and 1/16" on the bottom edge. Both ends rounded.24" Length, Model No.: 1039R-24AModel 1040A two sided scale ruler, 1-1/2" (38.1mm) wide and 0.032" (0.8mm) thick.Inch scale on the front and the back top edge in 1/2", 1/4", 1/8" and 1/16"with the first inch also in 1/32", 1/2" up inch scale (1" actually equals 1-1/2")in 1/2, 1/4", 1/8" and 1/16" on the front bottom edge. 1/3 up inch scale (1"actually equals 1-1/3") on the back bottom edge in 1/2", 1/4", 1/8" and 1/16"and a zero centered 1/2 off inch scale (1" equals 1/2") in 1/2", 1/4" and 1/8"in the middle of the back of the ruler. Zero centers are punched with a 1/4"(6.4mm) hole. Both ends rounded.24" Length, Model No.: 1040R-24AModel 1042A two sided ruler, 1-1/4" (31.8mm) wide and 0.032" (0.8mm) thick. 1/2 upinch scale (1" actually equals 1-1/2") in 1/2", 1/4", 1/8" and 1/16" on the fronttop edge, inch scale in 1/2", 1/4", 1/8" and 1/16" on the front bottom edge.1/2 up pica scale (6 picas actually is 9 picas 1-1/2") in 1/2 pica on the backtop edge, and pica scale in 1/2 pica on the back bottom edge. Both endsrounded.24" Length, Model No.: 1042R-24AModel 1028A two sided ruler 1-1/4" (31.8mm) wide and 0.032" (0.8mm) thick. StandardAdvertising Unit (SAU) scale based in 1/4" per column unit billing. Readsvertically. 1 to 6 columns are featured and the scale reads from top tobottom.24" Length, Model No.: 1028R-24AModel 1029Identical to Model 1028R-24A above except the scales use the decimalmethods of billing and the ruler is 1-3/8" (34.9mm) wide.24" Length, Model No.: 1029R-24AToTo order,order, call:call: (315) 463-9261 Fax: (315) 463-9034 ororseesee pagepage 2929 forfor information.information11

Graphic ArtsStainless steel with etched black epoxy

The ruler scale is 6" long with a smallest graduation of 1/64". The front lists the decimal equivalents of fractional inches and the back contains charts and formulas listing the tap and drill sizes for U.N.F., U.N.C., Metric, I

Related Documents:

But what are the best scales on this chromatic? - 10-note scales have only 1 semitone, not enough for musical interest. - 12-note scales have 5 semitones, but this makes scale notes very closely spaced. - 11-note scales have 3 semitones, which seems a good compromise (1 more semitone than classical scales). Scales on 19-note chromatic 59

6 Getting Started with Draw Figure 2: Rulers show the size of the selected object. To modify the units of measurement of the rulers, right-click on one of the rulers. The two rulers can have different units. Status bar The Status bar is located at the bottom of the workspace. The middle

Piano Scale Books Hirschberg Scales and Chords Are Fun: Bk. 1 (Major), Bk. 2 (Minor). Schaum, Scales and Pieces in All Keys: Bk. 1, Bk. 2. Palmer, Manus, Lethco: Scales, Chords-1st Book Palmer, Manus, Lethco: Complete Book of Scales Ada Richter: Know Your Scales and Arpeggios The Brown Scale Book Franz Schulz: Scales and Chords in all Keys

7 ESSENTIAL JAZZ GUITAR SCALES FOR BEGINNERS earning jazz guitar scales can be complicated and often beginners wonder which scales they should learn first. The 7 scales on the chart below are a good place to start. These scales are essential for beginning jazz guitarists and enable you to play over almost any jazz standard.

1.3 MMPI-A 1.4 MMPI-2-RF 2 Current scale composition 2.1 Clinical scales 2.2 Validity scales 2.3 Supplemental scales 2.4 PSY-5 scales . K, VRIN, TRIN), 31 Harris Lingoes subscales, 15 content component scales, the Personality Psychopathology Five (PSY-5) scales (AGGR, PSYC, DISC, NEGE, INTR), three social introversion

You can customize EASY-MARK to suit your needs. Use the ruler, set units of measurement, and shortcut keys as you see fit. Using Rulers Use Rulers to see a vertical and horizontal ruler on the main window. Click View Rulers or click the Ruler toolbar button . The ruler appears

*Use the links below to access printable rulers if needed. Printable Inches Rulers: Printable Centimeter Rulers (Monday) Complete “ Measuring with Inches ” (Tuesday) Complete “ Estimating Which Unit to Use” (Wednesday) Practice the problems within the links below. If additional supp

“rulers of evil” have a God given “right” to be the rulers of this current world system based on the authority given to Cain in the Bible. In Genesis 4:15 the LORD put a “mark” on Cain “lest anyone finding him should kill him” that protected him “sevenfold” from any would-be