IDEC Relay Selection Guide - Allied Electronics
Think Automation and beyond.Updatedwith NewModelsIDEC Relay Selection Guide
RV8H Series - 6mm Interface Relays Class I, Division 2 and Class I, Zone 2 hazardous locations Space-saving 6mm width Only 70mm in height from DIN rail Gold-plated contacts Pre-assembled relay and DIN mount socket Universal screw (flat and Phillips) or spring clamp terminals Preprinted marking plates availableScrew TerminalsSpring Clamp TerminalsRV8H – L – RoHS CompliantAD110 – C1D2Voltage CodeD6 6V DCD9 9V DCD12 12V DCD18 18V DCD24 24V DCTerminalsL ScrewS Spring Clamp(when using combination ofRV1H relay and SV1H socket)AD12 12V AC/DCAD18 18V AC/DCAD24 24V AC/DCAD48 48V AC/DCAD60 60V AC/DCAD110 100-125V AC/DCAD220 220V-240V AC/DCRatingC1D2 Class I Division 2 ratingBlank no CID2 ratingSpecsRV8HContact MaterialContact RatingMinimum Load (reference values)Dimensions (w x d x h) mmSocketReplacement PartsComplete PartNumberScrewSpring ClampAccessoriesComplete PartNumberSocketScrewSpring ClampRelayRV1H-G-D5RV8H- -AD18SV1H-07L-1SV1H-07LS-1RV1H-G-D18RV8H- -D9RV1H-G-D9RV8H- - -AD48SV1H-07L-2SV1H-07LS-2RV1H-G-D48RV8H- -D18RV1H-G-D18RV8H- -AD60SV1H-07L-2SV1H-07LS-2RV1H-G-D60RV8H- -D24RV1H-G-D24RV8H- H- -AD220SV1H-07L-4SV1H-07LS-4RV1H-G-D60RV8H- -D12SV1H-07L-5SV1H-07L-1SV1H-07LS-5SV1H-07LS-1 insert Terminal code: L Screw terminals, S Spring Clamp Terminals.DescriptionJumper (20 combs)ColorMarking Plate (10 pcs)Part er (circuit separator)Screwdriver2RelayRV8H- -D6RV8H- -AD12In place ofAgNi (Au plating)6A6V DC D0800.262.4332www.IDEC.com/relays
RJ Series - Slim Power Relays Compact size for maximum space savings on DIN rail SPDT 12A and DPDT 8A contacts (high capacity 16A SPST-NO available) Optional non-polarized, green LED Locking and release lever on SJ sockets RoHS CompliantRReg.-Nr. B312RJContact Configuration1 SPDT2 DPDT22SContactsblank Standard2 Bifurcated**TerminalS-BladeV-PCB*Diode is only for DC coils.**Bifurcated contacts available on DPDT relays only–CLOptionsC StandardCL LEDCD Surge Suppression Diode*CLD LED & Surge Suppression Diode*CH High CapacityA SPST-NO StandardAH SPST-NO High CapacitySpecsRJ1SContact MaterialContact RatingMinimum Load (reference values)Dimensions (w x d x h) mmBladePCBModels ModelsSocketsRelaysHold DownSpringsDINRailJumpersMarkingPlateRJ2SStandard DIN Rail Finger-safe DIN 2S-07LWSJ2S-61RJ1V (Std)–SQ1V-07BSQ1V-63RJ1V (HC) , RJ2V/RJ22V–SQ2V-07BSQ2V-63SJ9Z-CMPullover Locking LeverSQ9Z-CSQ9Z-C63SJ1S-05BW, SJ2S-05BW Aluminum DIN Rail (1 meter length)SJ1S-07LW, SJ2S-07LW DIN Rail End StopBNDN1000Finger Safe Sockets (only)1A100µA@1V DCPart NumberSQ1V-63, SQ2V-63all DIN mount sockets1APCB MountRJ2S (Std) RJ22SSQ1V-07B, SQ2V-07BRJ22VAgNi (gold clad)12A8A100mA@5V DC, 10mA@5V DC (PCB version)12.7x28.8x33DescriptionD6 6V DCD12 12V DCD24 24V DCD48 48V DCD100 100-110V DCRJ22SRJ1S (Std)SJ1S-05BW, SJ1S-07LWSJ2S-05BW, SJ2S-07LWVoltage CodeA12 12V ACA24 24V ACA120 120V ACA220 220V ACA240 240V ACD5 5V DCSilver-Nickel AlloyUse With SocketAccessoriesA24–BNL52 PolesSJ9Z-JF25 PolesSJ9Z-JF58 Poles10 PolesSJ9Z-JF8SJ9Z-JF10mount in choice of 5 differentpositions (sold in packs of 10)SJ9Z-PWPN103
RH Series - Compact Power Relays Small, industrial 10A GP relay SPDT, DPDT, 3PDT, 4PDT contacts Options: Indicator LED, check-button, top-mounting andsurge-suppression diodes DIN rail, through panel, and PCB-type sockets available SPDT and DPDT 500K cycle UL tested for maximum life expectancy RoHS CompliantRRH1B –URH1RH2SpecsContact MaterialAC6VAC12VAC24VAC120VAC240VDimensions (w x d x h) mmRH3*Diode, Indicator light, and check button not available with top mount option1. For RH2B use AC110-120V2. For RH2B use AC220-240V3. For RH2B use DC100-110VRH430mA@24V DC, 100mA@5V DC14x27.5x4221x27.5x4231x27.5x4241x27.5x42Standard DIN Rail Mount Finger-safe DIN Rail Mount Through Panel MountPCB B-62RH4BSH4B-05SH4B-05CSH4B-51SH4B-62Hold DownSprings & ClipsRH1BRH2BRH3BRH4BRH1B, RH2B, RH3B, RH4BRH1B, RH2B, RH3B, RH4BDINRailRelays / Socketsall DIN mount socketsDescriptionFor DIN Mount SocketPullover Wire SpringLeaf Spring (side latch)Leaf Spring (top latch)Aluminum DIN Rail(1 meter length)DIN Rail End -101For Through Panel & PCB Mount .262.43324DC6VDC12VDC24VDC48VDC110V10AMinimum Load (reference values)Sockets (for BladeTerminal Models)Coil VoltageSilver cadmium oxide (AgCdO)Contact RatingRelaysAC24VOptionsL Indicator lightC Check buttonT Top mounting*D Diode (DC only) Contact Configuration1 SPDTTerminal Type2 DPDTB Blade (.187”)3 3PDTV2 PCB4 4PDTAccessoriesLwww.IDEC.com/relays
RR Series - Power Relays Rugged, industrial 10A relay SPDT, DPDT, 3PDT 10A contacts Options: Indicator LED, check-button and side-flange mounting Round 8- and 11-pin base and square-blade base relays Horsepower rated for small motors and solenoids RoHS Compliant*RRRBA – U1Contact Configuration1 SPDT#2 DPDT3 3PDTTerminal TypeP 8 Pin (DPDT )PA 11 Pin (3PDT)B Blade (3PDT)BA Blade (SPDT, DPDT)L*AC120VOptionsL Indicator lightC Check buttonLC Indicator & Check buttonS Side flange*#* Indicator light and check button not available# Available in blade type onlyRR2PRR3PASpecsContact MaterialSocketsRR2BA29.3x36.4x56Standard DIN Rail Mount10mA@24V DC, 20mA@5V DC36.4x36.4x5636.4x36.4x55.4Finger-safe DIN Rail MountThrough Panel MountRR2PSR2P-05, SR2P-06SR2P-05CSR2P-51RR3PASR3P-05, SR3P-06SR3P-05CSR3P-51RR1BARR2BARR3BSR3B-05Relays / SocketsHold DownSprings & ClipsRR3B10AMinimum Load (reference values)Dimensions (w x d x h) mmDINRailCoil VoltageAC 6V DC 6VAC 12V DC 12VAC 24V DC 24VAC 120V DC 48VAC 240V DC 110VSilver (Ag)Contact RatingRelaysAccessoriesRR1BA*pin versions only–DescriptionRR2PRR3PASR3B-51For DIN Mount Socket For Through Panel Mount SocketSR2B-02F1Pullover Wire SpringRR1BA, RR2BA, RR3BSR3B-02F1SR3B-02F1SR3P-01F1SR3B-02F1RR2P, RR3PALeaf Spring (side latch)SFA-203all DIN mount socketsAluminum DIN Rail(1 meter length)DIN Rail End Stop–BNDN1000–BNL5–5
RU Series - Universal Relays 100% robotic assembly DPDT 10A, 4PDT 6A and bifurcated 4PDT 3A contacts Spot-welding technology eliminates internal wires and solder Non-polarized, green LED Color-coded, snap-on marking plates RoHS compliantRRUSpecsContact Configuration2 DPDT4 4PDT42 4PDT BifurcatedSpring Clamp DINRail MountSocketsM* NF version only available with PCB terminalsRU2RU4RU42AuAg/Ag6A5mA@24V DC21x27.5x41.4AuAg/AgNi3A (bifurcated)Standard DINRail MountFinger-safe DINRail MountSM2S-05CRU4S (4PDT)RU42S (4PDT)SU4S-11LSY4S-05SY4S-05CHold DownSprings & ClipsCoil VoltageA24 24V AC D6 6V DCA110 120V AC D12 12V DCA220 240V AC D24 24V DCD48 48V DCD110 110V DCAgSnOln10ASM2S-05DIN RailD24Options(Blank) Standard (Latchinglever & indicator light)C No latching leverR RC (AC coils only)NF No indicator light, no lever*D Standard diode (DC coils only)M Momentary latching leverSU2S-11LMarkingPlateAccessories–RU2S (DPDT)Panel MountSY4S-51Relays / Sockets6TerminalsS BladesV PCBContact MaterialContact RatingMinimum Load (reference values)Dimensions (w x d x h) mmRelaysS2DescriptionFor DIN MountSocketPCB DEC.com/relaysFor Through Panel & PCBMount SocketRU2S/RU4S/RU42SPullover Wire SpringSY4S-02F1SY4S-51F1RU2S/RU4S/RU42SLeaf Spring (side latch)SFA-202SFA-302RU2S/RU4S/RU42SLeaf Spring (top latch)SFA-101SFA-301Aluminum DIN Rail (1 meter length)BNDN1000–DIN Rail End StopBNL5–all DIN mount socketsall RU relaysReplacement Marking PlatesRU9Z-P*(*Specify color code. A orange, G green, W white,Y yellow)
RY Series - Miniature Relays Small, industrial GP signaling relay DPDT 3A, 4PDT 5A contacts Options: Indicator LED, check-button and surge-suppression diode Plug-in/solder and PCB terminals RoHS compliantRRY2S–ULAC24VOptionsL Indicator lightC Check buttonT Top bracket*D Diode*** Diode, Indicator light, and check button not available** Diode for DC coils only1. For RY4 use AC110-120V2. For RY4 use AC220-240V3. For RY4 use DC100 - 110VContact Configuration2 DPDT4 4PDTTerminal TypeS Blade (.110”)V PCBSpecsRY2Contact MaterialContact RatingMinimum Load (reference values)Dimensions (w x d x h) mmSocketsFinger-safe DIN RailMountThrough S-05CSY4S-51DIN RailHold DownSprings & ClipsRelays / SocketsAccessoriesRY4Silver (Ag), gold-plated3A5A10mA@5V DC, 5mA@24V DC14.2x27.5x41.521.2x27.5x41.5Standard DIN RailMountRelaysRY2SRY4SRY2S/RY4SCoil VoltageDC 6VAC 6VAC 12V DC 12VAC 24V DC 24VAC 120V DC 48VAC 240V DC 110VDescriptionPullover Wire SpringFor DIN MountSocketSY4S-02F1SY4S-51F1PCB MountSY2S-61SY4S-61SY4S-62For Through Panel & PCBMount SocketSY4S-51F1Leaf Spring (side latch)*SFA-202SFA-302RY2S/RY4SLeaf Spring (top latch)*SFA-101SFA-301all DIN mount socketsAluminum DIN Rail(1 meter length)BNDN1000–DIN Rail End StopBNL5–*not applicable for pcb mount sockets7
RF1V Series - Force-Guided Relays Compact and EN compliant force-guided relays Force-guided contact mechanism (EN50205 Type A TÜV approved) Contact configuration:4-pole (2NO-2NC, 3NO-1NC)6-pole (4NO-2NC, 5NO-1NC, 3NO-3NC) Built-in LED indicator available RoHS CompliantRRF1V – 2A2B LContact Configuration2A2B 4-pole, 2NO-2NC3A1B 4-pole, 3N0-1NC4A2B 6-pole, 4NO-2NC5A1B 6-pole, 5NO-1NC3A3B 6-pole, 3NO-3NC–SpecsSocketsSF1V-4-07LSF1V-4-61RF1V (6 pole)SF1V-6-07LSF1V-6-61DIN RailAccessoriesPCB MountRF1V (4 pole)Relays / Socketsall DIN mount sockets6-PoleAgSnO2 (Au flashed)6A@250V AC, 6A@30V DC5V DC 1mA13x40x27.513x50x27.5Finger-safe DINRail/Panel MountRelaysCoil VoltageD12 12V DCD24 24V DCD48 48V DCLED IndicatorBlank no indicatorL LED indicator4-PoleContact MaterialContact RatingMinimum Load (reference values)Dimensions (w x d x h) mmD48DescriptionFor DIN Mount SocketAluminum DIN Rail(1 meter length)BNDN1000DIN Rail End StopBNL5800.262.4332www.IDEC.com/relays8
Relay & Socket Cross Reference SH3B-05700-HK32 R3B-05700-HK36 2D 2,5/5-MP-24VDCRV1H-G-D24700-HLT1U12XRV8H-L-AD12D 2,5/5-MP-48VDCRV1H-G-D48700-HLT1U1XRV8H-L-AD110D D220D AD24D AD24D D220D U1RV8H-S-AD110700-HLT2U12RV8H-S-AD12RelaysSocket9
A2SR3B-0541.61./40.61.RQ1V-CHD3PA2SR2P-0546.61. 800.262.4332www.IDEC.com/relays
RL-2RQ2V-CNP7SA-14FSF1V-6-07LG2RV-1-S DC11RV1H-G-D12P7SA-14PSF1V-6-61G2RV-1-S DC21RV1H-G-D24PF083A-ESR2P-06G2RV-1-S RV8H-L-AD24R99-15 for tsPanasonic/Aromat/MatsushitaRelaysIDEC11
SJ2S-05BPhoenix ContactRelaysReleco C-12DC/21 C1D2RV8H-L-D12-C1D2S7-LSH2B-51PLC-RSC-24DC/21 C1D2RV8H-L-D24-C1D2S7-PSH2B-62PLC-RSC-120UC/21 C1D2RV8H-L-AD110-C1D2S9-MSY4S-05CPLC-RSC-230UC/21 PLC-RSP-24DC/21 -120UC/21 L-MR- -MR- 20REL-MR- R- REL-MR- 48DC/21RV1H-G-D48PIR6W-1P-24VDCRV8H-L-D24REL-MR- MR- MR- 699V-3011-85-1060RV1H-G-D60SocketsRelpolRelaysIDEC
AXRR1BA70-78D-1SH4B-05A283XBXRR2BARSL ZRA1SV1H-07LS-1A283XCXRR3BRSL ZRA2SV1H-07LS-2A314XBXRR2PRSL ZRA3SV1H-07LS-3A314XCXRR3PARSL ZRA4SV1H-07LS-4RSL 1AB4BDRV1H-G-D24RSL ZVA1SV1H-07L-1RSL 1AB4EDRV1H-G-D48RSL ZVA2SV1H-07L-2RSL 1AB4JDRV1H-G-D12RSL ZVA3SV1H-07L-3RSL 1AB4NDRV1H-G-D60RSL ZVA4SV1H-07L-4RSL 1PRBURV8H-S-AD24RSL Z2SV9Z-J20*RSL 1PREURV8H-S-AD48RSL 13RR3B-USRSL 1PRPURV8H-S-AD2208501KP12RR2PRSL 1PVBURV8H-L-AD248501KP13RR3PARSL 1PVEURV8H-L-AD488501KU12RR2BARSL 1PVFURV8H-L-AD1108501KU13RR3BRSL 1PVJURV8H-L-AD128501RS(D)14RU4S/RY4SRSL L-4PIR6W-1P-24VAC/DCSV1H-07L-1ZG20-1*Schneider Electric, Magnecraft BrandRelaysRSL 1PRJURelayscon’tSV9Z-J20*SocketsSquare D by Schneider ElectricRelaysIDEC13
Socketscon’t8501RS(D)44RH4BTE Connectivity, 11RR3BMT78750SR3P-06RT114 FRQ1V-CMPT78702SM2S-05RT424 cketsRT314 17SocketsSR3B-058501NR52TE Connectivity, Potter & BrumfieldRelays27E893
WeidmullerRelaysSocketsIDECMRS 12 VDC 1C0RV8H-L-D12MRS 12VDC 1CO C1D2RV8H-L-D12-C1D2MRS 120 VUC 1CORV8H-L-AD110MRS 230 VUC 1CORV8H-L-AD220MRS 24 VDC 1C0RV8H-L-D24MRS 24 VUC 1CORV8H-L-AD24MRS 24VDC 1CO C1D2RV8H-L-D24-C1D2MRS 24VUC 1CO C1D2RV8H-L-AD24-C1D2MRS 5 VDC 1C0RV8H-L-D6MRZ 12 VDC 1C0RV8H-S-D12MRZ 120 VUC 1CORV8H-S-AD110MRS 120 VUC 1CO C1D2RV8H-L-AD110-C1D2MRZ 230 VUC 1CORV8H-S-AD220MRS 230 VUC 1CO C1D2RV8H-L-AD220-C1D2MRZ 24 VDC 1C0RV8H-S-D24MRZ 24 VUC 1CORV8H-S-AD24MRZ 5 VDC 1C0RV8H-S-D6RSS112060 60Vdc-Rel1URV1H-G-D60RSS113012 12Vdc-Rel1URV1H-G-D12RSS113024 24Vdc-Rel1URV1H-G-D24WS 12/6SV9Z-PW16ZQV 4N / 20 *SV9Z-J20**Indicates additional digits required to complete part number.Note: The cross references listed are the closest match physicallyand functionally. If you are looking to match a specific applicationrequirement, please refer to our Industrial Automation Catalog. For anevaluation unit or technical support, contact IDEC or call your local ssupport@IDEC.com crossref@IDEC.com15
Your Control & Automation Solutions!Did you know that IDEC offers Automation products? Focusing oncreating quality products and providing solutions that you can relyon, IDEC has over 45,000 world-class products available. Not onlydo we have LED lights, switches, relays, power supplies, safetyproducts and more, but you can find PLCs, O/I Touchscreens andsensors for your automation needs. Contact IDEC today!www.IDEC.com/usaTechnical EC (4332)www.IDEC.com/usa 2014 IDEC Corporation. All Rights Reserved.Catalog no. MKT-QSGR-3 01/13 7.5K (PDF updated descriptionsdescriptionsin inthisthiscatalogcatalogarearesubjectsubjectto tochangechangewithoutwithoutnotice.notice.LED Machine LightingAutomation & SensingSafetySwitching & Controls General Machine Lighting PLCs Emergency Stops Switches & Pilot Devices Heavy Duty Machine Tool Lighting Operator Interfaces Door Interlock Switches Signaling Lights Refrigeration & Freezer Lighting Automation Software Enabling Switches Relays Flat Panel Inspection Lighting Power Supplies Safety Controllers Timers Hazardous Location Lighting Sensors Light Curtains Contactors Communications & Networking AS-i Safety at Work Terminal Blocks Barriers Circuit Breakers
RH4B SH4B-02F1 RH1B, RH2B, RH3B, RH4B Leaf Spring (side latch) SFA-202 SFA-302 RH1B, RH2B, RH3B, RH4B Leaf Spring (top latch) SFA-101 SFA-301 DIN Rail all DIN mount sockets Aluminum DIN Rail (1meterlength) BNDN1000 – DIN Rail End Stop BNL5 – *Diode, Indicator light, and check but-ton not
Programmable Logic Controllers J-10 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC J Programmable Logic Controllers Part Number FC4A-M08BR1 FC4A-M24BR2 Item I/O Points 8 (4 in/ 4 out) 24 (16 in/ 8 out) Output Type Relay Output, 240V AC/30V DC, 2A
Nissan Micra - OWM 4734 Nissan Micra - OWM 4734 CPU E6 H33750 1 Battery 2 Ignition switch 3 Fusible link holder 4 Fuse box 5 Fuse and relay box a) accessory relay b) blower motor relay 6 Intelligent power distribution module a) starter relay b) cooling fan hi relay c) cooling fan lo relay d) fuel pump relay e) ignition relay f) ECM relay
User Comments IDEC Corporation is eager to receive comments about its products and docu-mentation. If you have any comments, please phone, fax, or mail them: IDEC Corporation 1175 Elko Drive Sunnyvale, CA 94289 PH: 800-262-4332 FAX: 800-635-6246 www.idec.c
Timers RTE Series www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-9 G T imers RTE series part numbers are composed of 4 part number codes. When ordering a RTE series part, select one code from each category.
NRA Series Circuit Breakers N-8 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC N Circuit Breakers DC Time Delay Curves 1,000 100 10 1 0.1 0.01 100 125 150 200 300 400 500 600 700 800 900 1,000 Time
38 - Check voltage output to fuel pump @ relay set 39 - Check voltage input to relay set from ignition switch 40 - Check voltage input to fuel pump relay of relay set 41 - Check input voltage to control relay of relay set 42 - Check input voltage to control relay of relay set (continued)
Power MOSFET Relay Specifications (G6D Relay) The following specifications apply to G6D Relays mounted in a G70D Relay Terminal and not the G6D Relay itself. Coil Ratings (per G6D Relay) Note: 1. The must-operate voltage is 75% or less of the rated voltage if the relay is mounted upside down. 2. Rated current and coil resistance were measured .
Results are provided for actual relay testing. Part I: Distance Relay Tests (Texas A&M University) Distance relay testing can evaluate relay performance, calibrate relay settings, and identify system conditions that could cause unexpected relay operation. Developing a relay testing methodology requires consideration of how to model the power .
