Redi-Rail Runway Ladder With Removable Rungs
B-LINEDataCommDCRRR-17DCRRR-15SERIESRedi-Rail RunwayLadder with removable rungs
Redi-Rail Straight SectionsFinishes :Blank AluminumFB Aluminum with Flat Black PaintSB13AL C-Channel11/2" (38mm) StringersPart B13AL24SB13AL30SB13AL36SB14AL C-Channel2" (51mm) Stringers‘W’ Widthin.mm6"9"12"15"18"20"24"30"36"‘W’ Widthin.mmPart B14AL15SB14AL18SB14AL20SB14AL243/8"(9 mm)11/2"(38mm)SB14AL30SB14AL3691417/64" dia. (7mm) holes3.44" (146mm) for 6" rung spacing3.44" (146mm) for 9" rung spacing5.02" (146mm) for 12" rung spacing6"9"12"15"18"20"24"30"36"3/8"(9 g1.571"(40mm)Patent InformationU.S. Patent D361982; 5,580,014Canada 2,137,879UK Patent 2,285,343 Other United States and foreignpatents are pending.120"(3035mm)‘W’UL approval for painted runwaysplice kit grounding methodEaton has received UL approvalfor connecting painted runwaystringers with a full line of spliceconnectors while maintainingproper grounding connection perUL# E60548. This certificationwill allow installation of paintedrunways to any B-Line seriessplice connector (SB2107,SB2101A, SB160A, SB160C,SB160D, SB165, SB166A,SB166B,SB167, SB168C,SB168D, SB170, andSB170B) as per theinstallation procedures shownin figures 1 and 2. For the paintedrunway system to meet the ULrequirements, the installer mustfirst remove the runway paint atthe point of splice to allow properground connection.152228305381457508609762FIGURE 1Installation for SB166Astyle butt-spliceon painted runwayFIGURE 2Installation for SB165style 90 junction spliceon painted runwayAPaint Removal RequiredBoth SplicesARemove PaintTop Side Only2.50" Min2.00" Min.12" MinDetail A2.25" Min2.25" MinDetail ARemove PaintTop Side OnlyPaint RemovalRequiredBoth Splices
Common Redi-Rail AccessoriesRedi-Rail Runway is compatible with standard accessories for 11/2" runway stringers.Hanger Rod Bracket Cable Runway Butt-Splice ClampStudded bracket bolts to Redi-Rail holesFor 3/8" ATRLoading is 1,000 lbs. (4.45kN), per pair, safety factor 3Finish: Zinc Plated Used to connect 11/2" tall runway stringers end to end Includes (2) two clamps and hardware Finish: Black ZincCable RunwayButt-Splice ClampHanger Rod BracketSupportATR SizePart #11/2"9ZN-R2382"9ZN-R250Cable Retaining PostPart #StringerHeightSB2107BZ1 1/2" (38mm)SB21072BZ1" (51mm)5"(127mm)Mounting Bracket Used to increase cable capacity fill of runway Includes one (1) retaining post, one (1) neoprene endcap,and 1/4" mounting hardware Available in three (3) heightsEnd Cap Finish: Flat BlackFurnished with 1/4" mounting hardwareEIA/TIA panel mounting holes - both sidesMounting holes for NEMA outlet/junction boxesZinc plated steel5.125"Mounting BracketCableRetainingPost‘H’Part #‘A’in.mm9ZN-MB1-435 8"92‘A’CarriageBoltsHexNutsInside Side Rail Flange ApplicationLockWashersCable Retaining PostPart #Height 4Fits Stringerin.mm 8" x 11/2" 8" x 11/2"3 8" x 11/2"3 8" x 2"3 8" x 2"3 8" x 2"339 x 389 x 389 x 389 x 519 x 519 x 51Outside Side Rail Flange Application
Common Redi-Rail AccessoriesOut Board RungsEnd Caps Used to protect ends of runway stringers Sold in packages of 10 Black neoprene meets UL 94 Flame ResistanceFormed aluminum rung with attachment screwField installs as requiredTorque rung fasteners to 6 ft/lbs.Uniform load capacity on rung: 10 lbs.‘H’Out Board Rungs‘W’Part #Fill Depth ‘H’in.mmFill Width 4"5"5"6"9"6"9"101101127127Drop-Out for Redi-Rail Runway ‘H’152226152226Provides a radius in accordance with EIA recommendationsFits SB13AL style stringer onlyNo hardware requiredAluminum with Flat Black finish‘A’End CapsPart #SB21BSB21A‘H’in.mm‘W’in.mm 8" 8"991 1/2"2"385133Runway Stand-Off Bracket Use to provide additional space between the top of racksand enclosures over standard runway attachment devices Can be installed to accommodate perpendicular or parallelpathway orientations Rack elevation kits include: one (1) pair of brackets andassembly hardware Cabinet elevation kits include: two (2) pair of brackets andassembly hardware SB227R fits runway height of 11/2" SB21092 fits runway height of 2" Finish: Flat Black Powder Coat (FB)Drop-Out for Redi-Rail RunwayPart 38590742895Runway Stand-Off BracketFor 11/2" (38mm) Stringer HeightsPart #ApplicationElevation ", 21 2" & 3"4", 5" & 6"2", 21 2" & 3"4", 5" & 6"Two-Post RackTwo-Post RackEnclosure CabinetEnclosure Cabinet51, 63 & 76101, 127 & 15251, 63 & 76101, 127 & 152Runway Stand-Off BracketFor 2" (51mm) Stringer HeightsPart #ApplicationElevation Settingsin.mmSB2109-2Stand-Off21 2"63
Redi-Rail RunwayRedi-Rail Runway is a unique and flexible solution designed for data cablingapplications. Instead of a welded rung, the Redi-Rail rung connection is madewith hardware engineered for a strong connection, with rungs being removedusing standard tools. In addition, the holes along the length of the side railprovide a convenient place to attach rungs and accessories without drilling,helping save time in the field.Job-Site Flexibility Rungs can be easily removed to provide more space for cables to enter or exit the runwayRungs can be easily moved to support a drop out in a precise location over a rack or cabinetOutboard rungs provide a simple way to segregate and organize multiple cable runs along a single pathStraight sections are compatible with standard fittings, wall brackets, and supportsRung ProfileSave On Grounding Straps Straight sections and standard splices are UL classified. No bonding jumper is required at splice locations.Note: paint must be removed prior to splice connection. No bonding jumpers required on painted or unpainted systems3/4" high x 25/32" wideTime-Savings Lightweight aluminum makes straight sections easier to handle and results in a faster installationRung adjustments in the field no longer require cutting, helping save time on the job-siteHanger rod brackets eliminate the need to cut and install strut trapezesHoles in side rail eliminate the need to drill to attach a rung or accessory to the runwayFuture Expansion Flexibility Outboard rungs allow for installation of horizontal cable runs alongside the same runway Cable retaining posts allow more cables to be installed vertically along the runway pathButt-Splice ClampCable Retaining PostSB2107 BZSB126 FB(see chart for information)(see chart for information)Standard splice used to connectrunway sections. Black zinc finishfor easy grounding.Standard attachment used toincrease cable capacity fill ofrunway.Hanger Rod BracketRedi-Rail bracket used tosupport 3/8” threaded rod.Allows runway to be at up to45 angle from horizontal.Mounting BracketRedi-Rail bracket used to attach a variety ofpower and low-voltage accessories to runway.Ideal for mounting patch panels or surfacemount boxes.9ZNR(see chart for information)9ZN-MB1-4(see chart for information)End CapsStandard end caps used toprotect stringer ends of runway.Outboard RungSB21Redi-Rail attachment used to supportcables in a run just outside of the maincable path.(see chart for information)9A-SR0(see chart for information)Stand-Off BracketStandard bracket used to offset acable run from the top of racks orcabinets. Height is adjustableSB227 FB(see chart for information)Drop OutUnique drop out sized to fit aroundrung profile and used to support cablesexiting runway. No screws required.SB13ALDO FB(see chart for information)
For more information, visitEaton.com/datacentersU.S. Customer Service Center is staffed Monday through Friday from 7 a.m. to 5 p.m. Central Standard Time.Eaton509 West Monroe StreetHighland, IL 62249United StatesPhone: 1 Dahlia Street, Suite 200Fontana, CA 92337United StatesPhone: 951-737-5599www.cooperbline.com/tolcoEaton1000 Eaton BoulevardCleveland, OH 44122United StatesEaton.comB-Line Division509 West Monroe StreetHighland, IL 62249Eaton.com 2017 EatonAll Rights ReservedPrinted in USAPublication No. SA301023EN DCRRR-17February 2017Eaton is a registered trademark.All other trademarks are propertyof their respective owners.Follow us on social media to get thelatest product and support information.
Common Redi-Rail Accessories. Redi-Rail Runway is compatible with standard accessories for 11/2" runway stringers. Hanger Rod Bracket. 1 1/2" 2" 9ZN-R238 9ZN-R250. Support ATR Size. Part # Hanger Rod Bracket Studded bracket bolts to Redi-Rail holes For 3/8" ATR Load
Take the open space of a Redi-Plex Building and create any floor plan you need. REDI-ACCESS SYSTEMS These steps and ramps are Redi and available to complete your project in record time. Safely. REDI-PLEX BUILDINGS REDI-ACCESS SYSTEMS 5 3 4 12 REDI-PANEL SYSTEMS 070517_MHC_Sweets_
The 60' clear span of a Redi-Plex Building creates a large, columnless space that can remain open or be customized. REDI-PANEL SYSTEMS Take the open space of a Redi-Plex Building and create any floor plan you need. REDI-ACCESS SYSTEMS These steps and ramps are Redi and available to complete your proje
To ensure the Redi-Flo Variable Performance Pumping system operates properly, follow these guidelines: The Redi-Flo2 or Redi-Flo4 pump must be installed vertically with the discharge end pointed upwards. The electrical voltage supply to the Redi-Flo VFD must always be within or - 0% of the specified power supply
Redi-Rock's massive block size allowed taller walls to be built without using geogrid, reducing excavation and preserving valuable space. These qualities made Redi-Rock a natural fit for the Brentwood Stream Stabilization and Flood Control Project, in which the Redi-Rock 9" setback block was used in areas where geogrid was not an option. Redi-
4. Ladder Rise and Extension EXERCISE A - LADDER RISE The ideal training for this task requires an actual 12-foot aluminum extension ladder. If this size ladder is unavailable, you can use a single ladder or smaller extension ladder to practice the skill required raising the ladder. Practice of the ladder
6 HUSKY 10' Fiberglass Step Ladder 7 WERNER 6' Electro -Master Fiberglass Step Ladder 8 WERNER 6' Fiberglass Step Ladder 9 WERNER 6' Fiberglass Step Ladder 10 WERNER 4' Fiberglass Step Ladder 11 WERNER 16' Fiberglass Extension Ladder 12 LOUISVILLE 11 -Step Safety Ladder 13 ULINE 5 -Step Safety Ladder
OALS-775 Outside Arm Ladder System for 7-3/4" Ladder Combination OALS-975 Outside Arm Ladder System for 9-3/4" Ladder Combination OALS-1200 Outside Arm Ladder System for 12" Ladder Combination Systems are also available for customers wishing to make their own ladder racks. These Systems have no rack provided by ZICO: MODEL DESCRIPTION
2 CHAPTER1. INTRODUCTION 1.1.3 Differences between financial ac-countancy and management ac-counting Management accounting information differs from
