Audio Creator Vista Autorun.ppt - Cakewalk

2y ago
6 Views
2 Downloads
1.55 MB
51 Pages
Last View : 13d ago
Last Download : 2m ago
Upload by : Luis Waller
Transcription

AT-LP2D-USBDetailed Software Installation GuideFor Cakewalk pyro Audio Creator On the Windows Vista Operating system1

ContentsA note about the installation .3Installing Cakewalk pyro Audio Creator 4Registering the software for full use . 26Configuring your computer and the software 372

This guide will help you install, register and configure CakewalkPyro Audio Creator . The guide will take you step-by-step , screen-by-screen through the process.Make sure you follow the guide and do exactly what it tells you onepage at a time.Important note –This guide assumes that your CD drive is set toautomatically start the installation when the CDis inserted. If your CD is not set to automaticallystart the installation, close any windows that openand proceed to page 6 and begin with that step.Good luck and enjoy your AT-LP2D-USB system!3

Cakewalk Audio Creator LE Installation on a Vista Operating SystemInsert the Cakewalk Pyro Audio Creator LE Disk into your CD Drive.If the AutoRun feature is turned on for your CD Drive you shouldsee a window similar to the following :Select the Continue button.4

You should see a window similar to the following :Select the Cancel button.5

You will then be at your main computer screenSelect the Start button6

You should see a window similar to the following :Select the Computer button.7

You should see a window similar to the following :Right click with your mouse the CD drive. (It should say AudioCreator LE)8

You should see a window similar to the following :Select Explore.9

You should see a window similar to the following :Right Click with your mouse the Setup program.10

You should see a window similar to the following :Select “Run as administrator”11

You should see a window similar to the following :Select the “Continue” button.12

You should see a window similar to the following :Select the “OK” button.13

You should see a window similar to the following :Select the “Next” button.14

You should see a window similar to the following :Select all three of the above noted boxes to place a check markand accept the conditions.15

Notice after placing the check marks that the next button is now availablefor selection.Select the “Next” button.16

You should see a window similar to the following :Then select the “Next” button.17

You should see a window similar to the following :Then select the “Next” button.18

You should see a window similar to the following :Then select the “Next” button.19

You should see a window similar to the following :Then select the “Next” button.20

You should see a window similar to the following :Then select the “Next” button.21

You should see a window similar to the following :Then select the “Install” button.22

You should see a window similar to the following :You will see progress as the program is extracted and installedWait for the installation to complete. This could take several minutes.23

You should see a window similar to the following :Deselect both check boxes24

You should see a window similar to the following :Select the “Finish” button25

You should be returned to your main screen.Please note there is now an icon for Audio Creator LE on your desktopRight click the Audio Creator LE icon26

You should see a window similar to the following :Select “Run as administrator”27

You should see a window similar to the following. This begins theprocesses to register the product and receive full functionalityPlease note that your computer must be connected to the internet to complete this step.Select the “Register” button28

You will be taken to the internet and presented with a formsimilar to the one belowComplete the form making sure to provide the required data.29

After completing the form select the “Register” button30

You should see a window similar to the following :Close the window31

An email message will be sent to the address you provided containingyour registration codeOpen your email application and note the registration code.Note : make sure to save or print this message for future reference32

Return to your Audio Creator LE registration window.Enter the registration code. Make sure to enter all “-”. Also, pleasenote that all “0”’s are numbers. Select the “Complete” button.33

You should see a window similar to the following :Select the “OK” button.34

You should see a window similar to the following :Select the “Close” button to close the window.35

You should see a window similar to the following :Close the window.36

You should be returned to your main screen.Select the start button.37

You should see a window similar to the following :Select the Control Panel Button38

You should see a window similar to the following :Select “Hardware and Sound”39

You should see a window similar to the following :Select “Sound”40

You should see a window similar to the following :Select the “Recording” tab41

You should see a window similar to the following :Make sure that the USB Audio Codec is the default device. If it is not select it thenselect the “Set Default” button42

Select the USB Audio Codec and then select the “Properties” button43

You should see a window similar to the following :Select the “Advanced” tab44

You should see a window similar to the following :Select from the pull down menu “2 channel, 16 bit, 44100 Hz (CD Quality)”Make sure that all check boxes are selected.Select the “OK” button. Then close the Control Panel program45

From the “Sound” window select the “Playback” tab.Make sure your sound card is the default device. If it is not,Select it and then select the “Set Default” button.Select the “OK” button46

You should be returned to your main screen.Double click the Audio Creator LE icon to launch the application.47

You should see a window similar to the following :Select the “Close” button48

You should see a window similar to the following :Select the “Options” button49

You should see a window similar to the following :Select your sound card from the Playback Device pull down menuSelect (1 in, 1out) Stereo USB (USB Audio CODEC) from the Recording Devicepull Down menuContinued on next page50

Make sure the following is set this way:Bit Depth - 16Sample Rate (for new projects) - 44100Driver Mode - MME (32 Bit)Select the “OK” button51

Insert the Cakewalk Pyro Audio Creator LE Disk into your CD Drive. If the AutoRun feature is turned on for your CD Drive you should see a window similar to the following : Cakewalk Audio Creator LE Installation

Related Documents:

About the System (cont’d) 2 Alarm System Maximum Number of Keypads Minimum Software Revision Level VISTA-250FBP-9 3 4.1 VISTA-250BP 3 2.4 VISTA-250FBP 1 3.0 VISTA-250FBP 3 2.0 VISTA-128BPE 3 4.4 VISTA-250BPE 3 4.4 VISTA-128BPEN 3 7.0 VISTA-128BPLT 3 6.0 VISTA-128FBPN 3 5.1 VISTA-128BPT 6 10.1 VISTA-250BPT 6 10.1 VISTA-128BPTSIA 6 10.1 FA148CP 2 3.0 .

RAM: 2 GB OS: Windows 7 DVD: Dual Layer compatible HDD: 20 GB free space Autorun When you place the Arma 2: Operation Arrowhead DVD in your PC’s disk tray and close it, the Autorun application should start. If it does not, you can find it on your DVD drive’s root folder (Autorun.exe).The Autorun menu gives you

VISTA-128BP, VISTA-250BP, FA1660C 3 4.4 VISTA-128BPEN 3 7.0 VISTA-128FBP, VISTA-250FBP, FA1670C, FA1700C 3 4.1 VISTA-128FBPN 3 5.1 VISTA-128BPT, VISTA-250BPT, VISTA-128BPTSIA, FA1660CT 6 10.1 * Not UL Listed Note: Keypad may only be used in the follo

programming the VISTA-128SIA. All references in this manual for number of zones, number of user codes, number of access cards, and the event log capacity, use the VISTA-250BP’s features. The following table lists the differences between the VISTA-128BP/128SIA and the VISTA-250BP control panels. All other features are identical, except for the

between the VISTA-128BP/128SIA and the VISTA-250BP control panels. Additionally, only the VISTA-128BP/128SIA supports the capability to have a device duplicate keypad sounds at a remote location. All other features are identical for both panels. Feature VISTA-128BP/128SIA VISTA-250BP Number of Zones 128 250 Number of User Codes 150 250

programming the VISTA-128SIA. All references in this manual for number of zones, number of user codes, number of access cards, and the event log capacity, use the VISTA-250BP's features. The following table lists the differences between the VISTA-128BP/128SIA and the VISTA-250BP control panels. All other features are identical, except for the

765 S MEDIA TECHNOLOGY Designation Properties Page Audio Audio cables with braided shielding 766 Audio Audio cables, multicore with braided shielding 767 Audio Audio cables with foil shielding, single pair 768 Audio Audio cables, multipaired with foil shielding 769 Audio Audio cables, multipaired, spirally screened pairs and overall braided shielding 770 Audio Digital audio cables AES/EBU .

Pick up the Baldrige Excellence framework for education today or download free content. Become a Baldrige examiner or attend examiner training for a better understanding of the criteria. Attend a national or regional Baldrige conference. Complete a Baldrige self-assessment. The Baldrige Criteria are built on these interrelated core values and concepts. They represent beliefs and .