Johnson Products - Gunnebo Industries
Johnson ProductsCrane Blocks Snatch Blocks Oilfield Blocks Swivels Custom Engineered Products
Please note:In this chapter some products are rated in metric tonnes and some in short tons.Crane Blocks6:2 - 6:14Quick Reeve Crane Block6:2Shorty “J” Crane Block6:3Overhaul Balls6:15 - 6:17Top Swivel Overhaul Ball6:15Top-Swivel Overhaul Ball with BK Hook6:17Non-Swivel Overhaul Ball6:17Swivels6:18 - 6:21Wedge Sockets6:22Snatch Blocks6:23 - 6:26Snatch Block, Tailboard6:23Snatch Block, Shackle6:24Snatch Block, Hook6:24Snatch Block, others (page 6:29)6:25Tilt Wall Block6:26Oilfield Blocks6:27 - 6:30Tubing Block6:27Manhandler Block6:28Derrick Block6:28Laydown Block6:29Tong Line Block6:30Hay Fork Pulley6:30Guyline Block6:30J-Latches6:31Technical Information6:32 - 6:43General precautions6:32Inspection and maintenance6:36Warnings and use limitations6:38WARNING:Failure to read, understand and comply with the instructions, working load limits andspecifications in this publication may result in serious injury or damage to property.6
Johnson BlocksJohnson BlocksWith 50 years of excellence and industry leadership, Johnson Blocks hasdeep roots in the oilfield and the OEM crane industries. Our crane blocksare dominant in the North American lifting industry and the benefits ofusing Johnson blocks are many; with a proven record of engineeringinnovations and dependability, we have provided blocks all over the worldfor decades, always delivered with the highest quality, providing ourcustomers a peace of mind.Quick Reeve - Mobile Crane BlockStandard featuresOptional features Forged steel hooks, 35 - 300 short tons Duplex hooks available from 25 short tons Anti-rotation hook locking devices, allmodels Swivel safety anchor shackles, all models Center top dead end available for blockswith 3 sheaves or less Sheave shrouds, all models All weighted models have detachable cheekweights in cast iron or steel Proof test and certification, radiographic,magnetic particle, and other non-destructivetesting to specification by customer Quick release, zinc plated, rope retentionpin meets OSHA requirements for roperetention. Cannot be completely removedfrom block to avoid pin loss.J-Latch is standard equipment for blocksup to 250 short tons. Larger blocks areequipped with standard bar latches.Johnson J-Latch heavy duty, steel,lockable, spring loaded latch meets OSHApersonnel lifting requirements. The Johnson J-Latch provides a fast hookdeformation inspection point. Quick Reeve upright design rests on itsown hook for a stable base while reeving. No bulky, drop down, trap door to handle ordamage. Bronze bushings available Other sheave combinations available Wire rope end fitting will pass through blockwithout removal from wire rope. Can be manufactured to API, Lloyd’s, DNV,ABS, CCS and CE 5 – 330 short tons capacity 4:1 design factor 1, 2, 3, 5 or 7 sheaves 250 mm - 760 mm sheave diameters Reeving pins for all models Roller bearing sheaves Direct-channel sheave bearing lubricationthrough center pin Flame hardened grooves on sheave sizes400 mm - 610 mm in diameters Dual action (swing/swivel) roller thrustbearing hooks Forged steel hooks, up to 30 short tons Total disassembly possible Meet ASME 30.5 standardWARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:2All dimensions in mm
Johnson BlocksShorty ”J” Crane BlocksShorty ”J” represents the broadest line of standard crane blocks in the industry. In all, wemanufacture more than 1500 standard models of crane blocks not including options.Standard featuresOptional features 10 - 325 short tons capacity 4:1 design factorForged steel single barb hooks, 35 - 300 shorttons 1, 2, 3, 5 or 7 sheaves Duplex hooks available from 25 short tons300 mm - 610 mm in sheave diameters Anti-rotation hook locking devices, all modelsRoller bearing sheaves Swivel safety anchor shackles, all models Direct-channel sheave bearing lubricationthrough centre pin Sheave shrouds, all models Flame hardened grooves on sheave sizes406 mm - 610 mm in diametersAll weighted models have detachable cheekweights in cast iron or steel Bronze bushings available Dual action (swing/swivel) roller thrust bearinghooks Other sheave combinations available Forged steel hooks, up to 30 short tons J-Latch is standard equipment for blocks upto 250 short tons. Larger blocks are equippedwith standard bar latchesProof test and certification, radiographic,magnetic particle, and other non-destructivetesting to specification by customer Can be manufactured to API, Lloyd’s, DNV, ABS,CCS, CMAA and CE Johnson J-Latch heavy duty, steel, lockable,spring loaded latch meets OSHA personnellifting requirements. The Johnson J-Latch provides a fast hookdeformation inspection point. Meet ASME 30.5 standard6Fixed Bail Construction and Marine Rigging BlocksBeginning with 100 standard models, you are assured of selections that fit your every need.The lowest weight to capacity ratios, the quickest rigging and the easiest maintenance are afew additional benefits that prove once again that Johnson Blocks are consistent in quality andvalue.Standard featuresOptional features 10 to 135 short tons4:1 design factor1 to 6 sheavesFull coverage side plates and center platesTop dead-end shackleTapered roller bearings Oval pattern side platesWARNINGNEVER EXCEED RATED WORKING LOAD LIMITBronze bushingsDiamond pattern side platesFully galvanized for corrosion resistanceHigh capacity, custom engineered blocksavailable upon request6:3All dimensions in mm
Crane BlocksOne Sheave Shorty “J” Crane BlocksDesign Factor 4:1For crane block warnings and use limitations see pages: 6:42 and 6:4312-inch 1-Sheave Shorty ”J” Crane Blocks, 10-20 short tons, 3/8” to 9/16” or 10mm to hick.KHookWidthTDeadendThick.UHoleDia.16-inch 1-Sheave Shorty ”J” Crane Blocks, 15-30 short tons, 5/8” to 3/4” or 16mm to 220-inch 1-Sheave Shorty “J” Crane Blocks, 25-40 short tons, 7/8” to 1” or 22mm to 062983108864458119124-inch 1-Sheave Shorty “J” Crane Blocks, 30-55 short tons, 1-1/8” or 3533957301181561025164WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:4All dimensions in mm
Crane BlocksTwo Sheave Shorty “J” Crane BlocksDesign Factor 4:1For crane block warnings and use limitations see pages: 6:42 and KHookWidth12-inch 2-Sheave Shorty “J” Crane Blocks, 10-25 short tons, 3/8” to 9/16” or 10mm to 660J-25D12RTB2515687077525940671766016-inch 2-Sheave Shorty “J” Crane Blocks, 20-30 short tons, 5/8” to 3/4” or 16mm to 897620-inch 2-Sheave Shorty “J” Crane Blocks, 25-55 short tons, 7/8” to 1” or 22mm to -inch 2-Sheave Shorty “J” Crane Blocks, 40-70 short tons, 1-1/8” or 5730111159114WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:5All dimensions in mm6
Crane BlocksThree Sheave Shorty “J” Crane BlocksDesign Factor 4:1For crane block warnings and use limitations see pages: 6:42 and KHookWidth12-inch 3-Sheave Shorty “J” Crane Blocks, 15-30 short tons, 3/8” to 9/16” or 10mm to 660J-30T12RTB3019388979431740683897616-inch 3-Sheave Shorty “J” Crane Blocks, 25-40 short tons, 5/8” to 3/4” or 16mm to 088620-inch 3-Sheave Shorty “J” Crane Blocks, 30-80 short tons, 7/8” to 1” or 22mm to 4134639762912117112124-inch 3-Sheave Shorty “J” Crane Blocks, 55-100 short tons, 1-1/8” or 100106916541460492730121194140WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:6All dimensions in mm
Crane BlocksFive Sheave Shorty “J” Crane BlocksDesign Factor 4:1For crane block warnings and use limitations see pages: 6:42 and KHookWidth12-inch 5-Sheave Shorty “J” Crane Blocks, 25-30 short tons, 3/8” to 9/16” or 10mm to 022599479443340683897616-inch 5-Sheave Shorty “J” Crane Blocks, 30-80 short tons, 5/8” to 3/4” or 16mm to 1111115911457051112117112120-inch 5-Sheave Shorty “J” Crane Blocks, 55-100 short tons, 7/8” to 1” or 22mm to nch 5-Sheave Shorty “J” Crane Blocks, 200 short tons, 1-1/8” or 29mmJ-200QN24RTB20024952210WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT18037926:7730229257152All dimensions in mm6
Crane BlocksSeven Sheave Shorty “J” Crane BlocksDesign Factor 4:1For crane block warnings and use limitations see pages: 6:42 and HookWidth24-inch 7-Sheave Shorty “J” Crane Blocks, 250-325 short tons, 1-1/8” or 4191937987730232323229WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:8All dimensions in mm
Crane BlocksQuick Reeve Crane Blocks Design Factor 4:1For crane block warnings and use limitations see pages: 6:42 and 6:436ModelnumberWorking LoadLimit(short tons)NumberofSheavesSheaveDiameterWeightkg12-inch 1-Sheave QRJ Blocks, 10-15 short tons, 3/8” to 9/16” or 10mm to h 1-Sheave QRJ Blocks, 10-20 short tons 5/8” to 3/4” or 16mm to h 1-Sheave QRJ Blocks, 20-30 short tons 7/8” to 1” or 22mm to 20RTB30150833961059424-inch 1-Sheave QRJ Block, 30 short tons 1-1/8” or 29mmQRJ30S24RTBWARNINGNEVER EXCEED RATED WORKING LOAD LIMIT3016:9All dimensions in mm
Crane BlocksQuick Reeve Crane Blocks Design Factor 4:1For crane block warnings and use limitations see pages: 6:42 and 6:43ModelnumberWorking LoadLimit(short tons)NumberofSheavesSheaveDiameterWeightkg12-inch 2-Sheave QRJ Blocks, 15-25 short tons 3/8” to 9/16” or 10mm to 12RTB25230515616-inch 2-Sheave QRJ Blocks, 15-40 short tons 5/8” to 3/4” or 16mm to 6264WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:10All dimensions in mm
Crane BlocksQuick Reeve Crane Blocks Design Factor 4:1For crane block warnings and use limitations see pages: 6:42 and 6:436ModelnumberWorking LoadLimit(short tons)NumberofSheavesSheaveDiameterWeightkg12-inch 3-Sheave QRJ Blocks, 15-30 short tons, 3/8” to 9/16” or 10mm to 12RTB253305172QRJ30T12RTB30330519316-inch 3-Sheave QRJ Blocks, 25-50 short tons, 5/8” to 3/4” or 16mm to 16RTB403406300QRJ50T16RTB50340633320-inch 3-Sheave QRJ Block, 50 short tons, 7/8” to 1” or 22mm to 26mmQRJ50T20RTBWARNINGNEVER EXCEED RATED WORKING LOAD LIMIT5036:11508567All dimensions in mm
Crane BlocksQuick Reeve Crane Blocks Design Factor 4:1For crane block warnings and use limitations see pages: 6:42 and 6:43ModelnumberWorking LoadLimit(short tons)NumberofSheavesSheaveDiameterWeightkg16-inch 5-Sheave QRJ Blocks, 40-80 short tons, 5/8” to 3/4” or 16mm to 0QN16RTB705406474QRJ80QN16RTB80540662620-inch 5-Sheave QRJ Blocks, 70-100 short tons, 7/8” to 1” or 22mm to 0QN20RTB905508965QRJ100QN20RTB100550896524-inch 5-Sheave QRJ Blocks, 90-100 short tons, 1-1/8” or WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:12All dimensions in mm
Crane BlocksQuick Reeve Crane Blocks Design Factor 4:1For crane block warnings and use limitations see pages: 6:42 and 6:436ModelnumberWorking LoadLimit(short tons)NumberofSheavesSheaveDiameterWeightkg20-inch 7-Sheave QRJ Blocks, 100-140 short tons, 7/8” to 1” or 22mm to 05WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:13All dimensions in mm
Overhaul BallsOverhaul BallsProvide the overhaul weight necessary to counter bearing friction and winchto-boom-tip line weight. Because these units must meet a wide range of fieldapplications, we offer an equally wide range of unit sizes. It is in fact, one of thewidest ranges available. Over 240 models; 3 - 25 metric tonnes WLL. Non-swivel ballsare also available.Standard featuresOptional features 3 to 25 metric tonnes 4:1 design factor Heavy duty J-Latch standardSplit Ball Non-SwivelHigh capacity, customengineered balls availableupon request.Top SwivelGunneboIndustries BKSafety HookBottomSwivelSplit Overhaul BallDesign Factor 4:1Art.no.Model No.Weight kgWire Rope SizeFBall Dia.452245OB 50 SPLIT22.7Suits 13 - 22 mm wire rope184452179OB 100 SPLIT45.4Suits 16-22 mm wire rope235Top Swivel Overhaul Ball 3 - 25 metric tonnesDesign Factor 4:1Key to Top Swivel Overhaul Ball Model Numbers:OB - Overhaul Ball4EE - Swivel Model85 - Ball Weight (lb)4 - TypeTo order please specify the model 5-4471539OB7EE35-4Weight atOpeningJHookThicknessKHookWidthRPin toObstructionSPin toEnd ofFittingTThicknessof 34WLLmetrictonnesWARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:14All dimensions in mm
Overhaul 25EE650 - -422.7568.4104290354971766171644253Model no.WorkingLoad Limit(short tons)Weight .OpeningLengthwith Latch ThicknessKHookWidthSRTUPin to Thickness HolePin toEndObstruction of Fitting of Eye DiameterType 4 Overhaul Ball, 7 short tonsOB 7EE 35-4728.662554519035463739342633OB 7EE 85-4745.462554524135463739342633OB 7EE 150-4777.669261228635463739342633OB 7EE 200-4795.369261230535463739342633OB 7EE 220-4711369261232435463739342633OB 7EE 285-4714469261235335463739342633Type 4 Overhaul Ball, 12 short tonsOB 12EE 85-41263.080168424146664957523345OB 12EE 150-41294.886474728646664957523345OB 12EE 200-41211286474730546664957523345OB 12EE 220-41213186474732446664957523345OB 12EE 285-41216386474735346664957523345OB 12EE 350-41218086474736846664957523345OB 12EE 500-41226591579843346664957523345OB 12EE 650-41231991579845646664957523345OB 12EE1150-41253191579854946664957523345Type 4 Overhaul Ball, 19 short tonsOB 19EE 85-41977.188976124171766062523345OB 19EE 150-41910995382528671766062523345OB 19EE 200-41912795382530571766062523345OB 19EE 350-41919795382536871766062523345OB 19EE 500-419267100487643371766062523345OB 19EE 650-419332100487645671766062523345OB 19EE1150-419545100487654971766062523345Type 4 Overhaul Ball, 25 short tonsOB 25EE 350-42520999285236871766071644253OB 25EE 500-425289104290343371766071644253OB 25EE 650-425356104290345671766071644253OB 25EE1150-425568104290354971766071644253Type 4 Overhaul Ball, 30 short tonsOB 30EE 650-43039612501061456761169571734158OB 30EE1150-43060912501061549761169571734158Bottom Swivel Overhaul Balls available upon requestWARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:15All dimensions in mm6
Overhaul BallsTop-Swivel with BK Hook and Non-Swivel Overhaul BallsFor overhaul ball warnings and use limitations see pages 6:45 – 6:46.Design Factor 4:1Top-Swivelwith BK HookNon-SwivelOverhaul BallsOverhaul ball assemblyWith BK-13-10 HookModelNumberWorking Load Limit(short tons)WeightkgModelNumberWorking Load Limit(short 4.3With BK-16-10 K7EE200-4796.2With BK-18/22-10 330OBK12EE1150-412532WARNINGNEVER EXCEED RATED WORKING LOAD -225573OB30NS650-230368OB30NS1150-230651All dimensions in mm
SwivelsSwivelsOur Johnson thrust bearing swivels are widely used for theprimary purpose of allowing the natural twist in wire rope torotate as necessary without affecting the suspended load.Standard swivels are available in six different end fittingcombinations, from 3 to 30 metric tonnes WLL.Simple and compact, the swivels are engineered for longlife and economical cost. Hooks are forged alloy steel,lubrication fittings are recessed, and a generous bronzebushing assures toughness and long life.Standard equipmentOptional equipment Forged hook with latchRoller thrust bearingLarge bronze thrust bushingRecessed lubrication fittingLarge lubricant reservoirProof load test Custom end fitting sizesCustom sizes above 30 metrictonnes WLLAnti-corrosion coatingsCE compliant upon request.The simple and compact design of a Johnson Swivel6Compact Overall Design,engineered for low cost and long lifeCompatible with Johnson Swivel Overhaul Ballsand Wedge SocketsAlloy Steel Upper Fittings/HousingsSteel Thrust NutsLarge Lubricant ReservoirPositive-Lock Set ScrewsTapered Roller Thrust BearingsSteel Lower HousingsRecessed Alemite Grease FittingsAlloy Steel Lower Fittings, ShanksAlloy Steel Hooks – Quenched and TemperedAvailable in Custom Models Price on ApplicationWARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:17All dimensions in mm
SwivelsSwivel Eye/Hook, 3 - 30 metric tonnesDesign Factor - see tableKey to Eye/Hook Swivel Model Numbers:3 - Working Load Limit (metric metrictonnes)E - Top Fitting (E Eye)H - Bottom Fitting (H Hook)M - Midget SwivelTo order please specify the model hBNetLengthFSwivelDia.HThroatOpeningwith LatchJHookThicknessKHookWidthREHole toObstructionMinSEHole to Endof FittingMaxTThicknessof Eye 230EH30.06745151658389767173415953.04Swivel Jaw/Hook, 3 - 15 metric tonnesDesign Factor - see tableKey to Jaw/Hook Swivel Model Numbers:3 - Working Load Limit (metric metrictonnes)J - Top Fitting (J Jaw)H - Bottom Fitting (H Hook)M - Midget SwivelTo order please specify the model peningwith eenEarsMinRJPin toObstruc-tionMinSJPin toEndofFittingMaxVThicknessof ARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:18All dimensions in mmDesignFactor
SwivelsSwivel Eye/Eye, 3 - 30 metric tonnesDesign Factor 5:1, CE markedKey to Eye/Eye Swivel Model Numbers:3 - Working Load Limit (metric metric tonnes)E - Top Fitting (E Eye)E - Bottom Fitting (E Eye)M - Midget SwivelTo order please specify the model number.Art.no.WLLmetrictonnesModelNo.AOverall LengthBNet LengthFSwivelDia.RHole toObstructionMinSHole to Endof FittingMaxTThickness ofEye MaxUHole wivel Jaw/Jaw, 3 - 19 metric tonnes6Design Factor 5:1, CE markedKey to Jaw/Jaw Swivel Model Numbers:3 - Working Load Limit (metric tonnes)J - Top Fitting (J Jaw)J - Bottom Fitting (J Jaw)M - Midget Swivel.To order please specify the model hBNetLengthFSwivelDia.PPin Dia.MaxQWidthBetweenEars MinRPin toObstructionMinSPin to Endof FittingMaxVThicknessof 621.5WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:19All dimensions in mm
SwivelsSwivel Jaw/Eye, 3 - 19 metric tonnesDesign Factor 5:1, CE markedKey to Jaw/Eye Swivel Model Numbers:3 - Working Load Limit (metric tonnes)J - Top Fitting (J Jaw)E - Bottom Fitting (E Eye)M - Midget SwivelTo order please specify the model sMin.REHole toObstruc-tionMin.RJPin toObstruc-tionMin.SEHoletoEnd ofFittingMax.SJPin ttingMinVThicknessof 19JE19.0404302113455062755252334519617.2Swivel Eye/Jaw, 3 - 19 metric tonnesDesign Factor 5:1, CE markedKey to Eye/Jaw Swivel ModelNumbers:3 - Working Load Limit (metric tonnes)E - Top Fitting (E Eye)J - Bottom Fitting (J Jaw)M - Midget SwivelTo order please specify the model hBNetLengthFSwivelDia.PPinDia.MaxQWidthBetweenEars MinREHole toObstruc-tionMinRJPin toObstruc-tionMinSEHoletoEnd ofFittingMaxSJPin toEnd ofFittingMaxTThicknessof EyeMaxUHoleDia.MinVThicknessof 416315113444962755252334519619WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:20All dimensions in mm
Wedge SocketsOpen Wedge SocketsOpen Wedge Sockets combine positive attachment with optimum versatility.Easy-to-change Johnson Wedge Sockets are a high strength cast alloy steelwith charpy value of 34J (25ft-lb) at -20C (-4F). Each socket accepts at least twodifferent ductile iron wedges. This allows the socket to be used with more thanone rope size. Together, wedge and body act as a vise which grips the wire ropeand locks it into place.Key to Open Wedge Socket Model Numbers:WS - Wedge SocketFS - Federal Specification6 - Body Number19 mm - Wire Rope Wedge SizeTo order please specify the model number.Open Wedge Socket 9.5 mm to 38 mmDesign Factor 4:1Art.no.Model lThicknessPPin Dia.QWidthBetweenEars MinRPin toEnd ofFittingSPin to Endof FittingVThicknessof Ear472371WS-4 3/8"101.5165137662624312911472372WS-4 7/16"111.5165137662624312911472373WS-4 1/2"131.5165137662624312911472374WS-5 1/2"134.0222184903235463717472375WS-5 9/16"144.0222184903235513717472376WS-5 5/8"164.0222184903235513717472377WS-6 5/8"164.2224186903238483816472378WS-8A 5/8"167.32862321064243665413472379WS-6 3/4"194.22241869032383638.16472380WS-8A 3/4"197.32862321064243615413472381WS-7 7/8"227.3283241903233584118472382WS-8 1903233644118472384WS-8 1"268.22892411064243564821472385WS-10 1 1/8"2820.93923371064245795621472386WS-11 1 1/8"2824.540634313264621126422472387WS-10 1 1/4"3220.93923371064245795621472388WS-11 1 1/4"3224.540634313264621096422474271FS-26 1 3/8"3543.146738116277671078633472389FS-26 1 1/2"3843.146738116277671078633Provides a termination efficiency 80%, based on the catalog minimum breaking force of 6x19, 6x25, and 6x36, IWRC wire rope.WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:21All dimensions in mm6
Snatch BlocksSnatch BlocksJohnson Snatch Blocks have the convenient side opening feature. This is true even of our heavyduty top dead-end models, and makes it easy to reeve the block without removing any fittingfrom the end of the wire rope. Other features include choice of swivel hook, shackle, eye fittingsor Tailboard Blocks which have no fittings at all.Standard featuresOptional features Rugged and reliable Proof load 4:1 design factor Roller bearings Easy-open side plates Marine epoxy paint Metric rated Heavy duty J-latch Large hand nuts Larger sizes Retainer on latch pin Customized blocks Bow shackle with retainer pin CE compliant upon request Bronze bushingWide rangeWe offer over 250 models and sizes, from 2 to 30 metric tonnes. Sheave sizes from 76 mm to 610 mm indiameter. Multiple rope sizes and end fittings available.RuggedJohnson’s famous durability is well established in the industry. These blocks stand up to the toughestapplications, whether in blistering sun or under icy blizzard conditions.ReliableFrom built-in strength comes the reliability long associated with the Johnson name. These blocks areperformers, day after day and year after year.Many choicesSingles, doubles, top dead end, towing, oilfield, pipe laying and general construction. Sizes and specificmodels for all.ConvenientLarge, easy to grip hand nuts on all models, especially on the smallest models. Makes it easier to open andclose under all conditions without removing gloves, and easy to tap with a hammer to loosen or lock down.Secondary securementAll hand nuts and shackles are fitted with ”R” pins as a secondary securement device, for example whereinspection is limited or infrequent due to location or other factors.Snatch Block - TailboardSingle SheaveDesign Factor 4:1, CE e Rope SizeWeightkg474572012QR3SB2S3BT23” / 80 mm5/16” – 3/8” / 8 - 10 mm1.4474562016QR3SB4S4BT44” / 100 mm3/8” - 1/2” / 10 - 13 mm4.5474621016QR3SB4S6BT46” / 150 mm3/8” - 1/2” / 10 - 13 mm5.9474624016QR3SB4S8BT48” / 200 mm3/8” - 1/2” / 10 - 13 mm7.7474542024QR3SB8S6BT86” / 150 mm5/8” - 3/4” / 16-20 mm7.2474369024QR3SB8S8BT88” / 200 mm5/8” - 3/4” / 16-20 mm11.3474375024QR3SB8S10BT810” / 250 mm5/8” - 3/4” / 16-20 mm14.1474381024QR3SB8S12BT812” / 300 mm5/8” - 3/4” / 16-20 mm15.4474410028QR3SB12S6BT126” / 150 mm3/4” - 7/8” / 20 - 22 mm12.7474416028QR3SB12S8BT128” / 200 mm3/4” - 7/8” / 20 - 22 mm19474422028QR3SB12S10BT1210” / 250 mm3/4” - 7/8” / 20 - 22 mm24.5474733036QR3SB20S8BT208” / 200 mm1” - 1 1/8” / 26 - 29 mm20.9474734036QR3SB20S10BT2010” / 250 mm1” - 1 1/8” / 26 - 29 mm29.5474742040QR3SB30S20BT3020” / 500mm1 1/8” - 1 1/4” / 29-32 mm93WARNINGNEVER EXCEED RATED WORKING LOAD LIMIT6:22All dimensions in mm
Snatch BlocksSnatch Block with ShackleSingle SheaveDesign Factor 4:1, CE e Rope SizeWeightkg474602012QR3SB2S3BS23” / 80 mm5/16” – 3/8” / 8-10 mm2.3474603016QR3SB4S4BS44” / 100 mm3/8” - 1/2” / 10-13 mm7.7474620016QR3SB4S6BS46” / 150 mm3/8” - 1/2” / 10-13 mm9.0474623016QR3SB4S8BS48” / 200 mm3/8” - 1/2” / 10-13 mm10.815.0474644016QR3SB4S10BS410” / 250 mm3/8” - 1/2” / 10-13 mm474365024QR3SB8S6BS86” / 150 mm5/8” - 3/4” / 16-19 mm12.7474371024QR3SB8S8BS88” / 200 mm5/8” - 3/4” / 16-19 mm16.8474377024QR3SB8S10BS810” / 250 mm5/8” - 3/4” / 16-19 mm19.5474587024QR3SB8S12BS812” / 300 mm5/8” - 3/4” / 16-19 mm24.5474412028QR3SB12S6BS126” / 150 mm3/4” - 7/8” 20-22 mm22.7474418028QR3SB12S8BS128” / 200 mm3/4” - 7/8” 20-22 mm29.0474424028QR3SB12S10BS1210” / 250 mm3/4” - 7/8” 20-22 mm34.5474582028QR3S
Snatch Block, Shackle 6:24 Snatch Block, Hook 6:24 Snatch Block, others (page 6:29) 6:25 Tilt Wall Block 6:26 Oilfield Blocks 6:27 - 6:30 Tubing Block 6:27 Manhandler Block 6:28 Derrick Block 6:28 Laydown Block 6:29 Tong Line Block 6:30 Hay Fork Pulley 6:30 Guyline Block 6:30 J-Latches 6:31 T
Johnson Evinrude Outboard 65hp 3cyl Full Service Repair Manual 1973.pdf Lizzie Johnson , Reporter Lizzie Johnson is an enterprise and investigative reporter at The San Francisco Chronicle. Lizzie Johnson By Lizzie Johnson Elizabeth Johnson By Elizabeth Johnson Allen Johnson , Staff Writer Allen Johnson is a San Francisco Chronicle staff writer .
Allen C. Johnson Dennis R. Johnson Keith D. Johnson Paul 0. Johnson Robert A. Johnson Ronald J. Johnson Scott W. Johnson David W. H. Jorstad Kimball C. Justesen Joseph Kaminsky Errol K. Kantor Mark A. Karney Gerald R. Keating Kevin P. Keenan Patrick W. Ke
subcommittee shall be the truth, the whole truth, and nothing but the truth, so help you God? Mr. Johnson. I do. Mr. Kunzig. Would you state your full name for the record and spell it, please, for the stenographer. TESTIMONY OF MANNING JOHNSON Mr. Johnson. Manning Johnson, M-a-n-n-i-n-g J-o-h-n-s-o-n. [This link to Manning Johnson’s last speech]
resume. administering the Johnson & Johnson/Janssen COVID-19 vaccine following the. recommendation from the CDC and FDA. More info: DSHS News Release Frequently Asked Questions Johnson & Johnson Safety Information Updated Johnson & Johnson EUA Fact Sheet for Recipients and Caregivers. 6
Andrew johnson impeachment apush Was andrew johnson impeachment justified. Impeachment of andrew johnson apush quizlet. Was president andrew johnson impeached. Congress also wanted to reconstruct the presidency and the south. Andrew Johnson’s impeachment was the result of Stanton’s dismissal by the President, this was the last straw for
Britt Johnson is alleged to have been born a slave under either Moses Johnson or his son Alan Johnson around 1840, although Britt's name does not appear in the 1850 or 1860 slave censuses. In 1850, a Moses Johnson from Tennessee was living in Navarro County, Texas, and by 1860, a Moses Johnson from Tennessee was living in Young County, Texas.
Johnson & Johnson was founded in 1886 and is classified as a Fortune 500 Company. The headquarters for J&J is in New Brunswick, New Jersey and their consumer divisions are located in Skillman, New Jersey. Johnson & Johnson operates in over 60 countries and has 250 subsidiaries in those countries, with products being sold in 175 countries.
for use in animal nutrition. Regulation (EC) No 178/2002 laying down the general principles and requirements of food law. Directive 2002/32/EC on undesirable substances in animal feed. Directive 82/475/EEC laying down the categories of feed materials which may be used for the purposes of labelling feedingstuffs for pet animals The Animal Feed (Hygiene, Sampling etc and Enforcement) (England .
