FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB

2y ago
32 Views
4 Downloads
2.85 MB
10 Pages
Last View : Today
Last Download : 2m ago
Upload by : Ellie Forte
Transcription

FRONT, REAR AND SIDE ADVANCED WINDBAFFLE WB-PA/WB-SD/WB-REJob Name:System Reference:Date:APPLICATION The Wind Baffles are used to extend the cooling temperature operation range of thePUY, PUZ, MXZ and PUMY models The information below outlines which wind baffles to utilize per required operation range Please refer to the installation manual of the appropriate outdoor unit for correctinstallation requirementsCOOLING TEMPERATURE OPERATION RANGE WITH WIND BAFFLESModelSeriesOperation RangeWithout Wind BafflesFront Wind BafflesFront Advanced Side Advanced Rear Wind BafflesPUZ-723 F - 115 F0 FN/APUY-723 F - 115 F0 F-40 FPUMY*23 F - 115 F5 FN/AMXZ23 F - 115 F5 FN/A*Operation range varies based on indoor unit connected, refer to service manual for applicable indoor units**If unit is exposed without wall surfaces surrounding for protection from wind, then side and rear wind baffles will be required. Please refer to installation dimensions and outdoor unitinstallation manual for appropriate requirements.Type and QuantityModelsFront Wind BafflesWB-PA3WB-PA4Advanced Side Wind BafflesWB-PA5WB-SD4WB-SD5WB-SD6Advanced Rear Wind MY-HP48NKMU2Specifications are subject to change without notice. 2019 Mitsubishi Electric Trane HVAC US LLC

FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-REFRONT WIND BAFFLE WB-PA3 / WB-PA4 / WB-PA5GENERAL FEATURES Front Wind Baffles allow outdoor units to operate at full capacity down to the temperature ranges shown in the table above. Prevents wind from reversing outdoor fan rotation when unenergized . Durable and low maintenance construction.PLEASE NOTE Install outdoor units with the back surface facing wall side to eliminate the effects of external windOutdoor units should not be installed in an orientation or site where the wind blows directly at the back of the unitWind baffle should not be used where there is any obstacle at either side or above the outdoor unit as the discharged air will be blockedRefer to outdoor unit for detailed installation instructionsWB-PA3Specifications are subject to change without notice. WB-PA4 / WB-PA5 2019 Mitsubishi Electric Trane HVAC US LLC

FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-READVANCED WIND BAFFLE WB-SD / WB-REGENERAL FEATURES Advanced Side and Rear Wind Baffles allow outdoor units to operate at full capacity down to thetemperature ranges shown in the table above Prevents wind from reversing outdoor fan rotation when unenergized Durable and low maintenance constructionPLEASE NOTE Installation location will dictate Advanced wind baffle requirementsRefer to the installation manual for additional detailsAdvanced Wind Baffles should be installed to prevent any wind blowing directly into the unitFront Wind Baffle (WB-PA3, WB-PA4, WB-PA5) is also required for -40 F operation of PUY modelsWB-SD4WB-SD5WB-SD6WB-RE4WB-RE5WB-RE6WIND BAFFLE SPECIFICATIONSModelsExteriorColorSurface TreatmentMaterialWeightWB-PA38 Lbs. 8 Oz.WB-PA47 Lbs. 7.9 Oz.WB-PA5WB-SD4WB-SD5WB-SD6WB-RE4MatchesP-Series Outdoor Unit(Ivory Munsell3Y 7.8/1.1)8 Lbs. 8 Oz.PolyesterPowder CoatingAlloy Hot-DipZinc CoatedCarbon Steel Sheet6 Lbs.10 Lbs.15 Lbs.11 Lbs.WB-RE518 Lbs.WB-RE635 Lbs.Specifications are subject to change without notice. 2019 Mitsubishi Electric Trane HVAC US LLC

2525.6781125FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-RE1625.6DIMENSIONS: OnS:Wb-Pa2DimenSiOnS:Wb-Pa24.254 254 PlCS.58ASpecifications are subject to change without notice.Specifications are subject to change without notice. 76DESCRIPTIONUNLESS OTHERWISE NSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16ANGULAR: BEND 2 DEGREESTWO PLACE DECIMAL 0.06THREE PLACE DECIMAL -submittal8G5INTERPRET GEOMETRICTOLERANCING PER:ASME Y14.5MATERIAL20 GA GALV G90FINISHPOWDER COAT PAINTDESCRIPTIONREVISIONS4DO NOT SCALE DRAWING3DRAWNNAMEDATECFOCT-23-12MITSUBISHI ELECTRICTITLE:CHECKEDENG APPR.MFG APPR.Q.A.PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFMITSUBISHI ELECTRIC CORPORATION. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFMITSUBISHI ELECTRIC CORPORATION ISPROHIBITED.WIND BAFFLE - WB-PA3MR. SLIM P-SERIESPUMY-60SUBMITTALSIZE DWG. NO.BREV-WB-PA3SHEET 1 OF 1SCALE: 1:8 WEIGHT:2A1 2018 Mitsubishi Electric Trane HVAC US LLC 2019 Mitsubishi Electric Trane HVAC US LLC

2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.Specifications are subject to change without notice.WB-PA4 2017 Mitsubishi Electric US, Inc.Inc. 2017 2017 Mitsubishi Electric US, Inc.21-1/8 2019 Mitsubishi Electric Trane HVAC US LLCSpecifications are subject to change without notice. 2018 Mitsubishi Electric Trane HVAC US LLCSpecifications are subject to change without notice. 2018 Mitsubishi Electric Trane HVAC US LLCSpecifications are subject to change without ICS,ELECTRONICS,INC.INC. /8DIMENSIONS: WB-PA4DIMENSIONS: WB-PA4DIMENSIONS 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.Specifications are subject to change without notice.22-3/822-3/822-3/8FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-RE

FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-REDIMENSIONS: WB-PA5DIMENSIONSWB-PA57-7/8"7-7/8"23" 23"DIMENSIONS: WB-PA5DIMENSIONS: WB-PA2DIMENSIONS: WB-PA5DIMENSIONS: WB-PA2Manufactured for MITSUBISHI ELECTRIC US, INC.1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 ed for MITSUBISHI ELECTRIC TRANE HVAC US LLC1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.comFORM# WIND BAFFLE - 201806Specifications are subject to change without notice.Specifications are subject to change without notice. 2018 Mitsubishi Electric Trane HVAC US LLC 2019 Mitsubishi Electric Trane HVAC US LLC

Job nation: Schedule No.Purchaser:UnitDesignation:Schedule No.Engineer:ModelNo. PE-SD-12-18Engineer:ModelNo. BAFFLEPE-SD-12-18SubmittedFRONT,To:REAR AND SIDE ADVANCEDWINDWB-PA/WB-SD/WB-RESubmittedTo:Submitted By:For: ReferenceApprovalConstructionSubmitted By:For: ReferenceApprovalConstructionDIMENSIONSDIMENSIONS: WB-SD1 and WB-RE1DIMENSIONS: WB-SD1 and 7-7/8"20-3/8"20-3/8"7-7/8"Unit: inchUnit: inchJob nation: Schedule No.Purchaser:Unit Designation:Schedule No.Engineer:ModelNo. PE-RE-12-18Engineer:ModelNo.PE-RE-12-18Submitted To:8-31/32"Submitted8-31/32" ReferenceSubmitted To:By:For:ApprovalSubmitted By:For: Specifications: Material:18 Ga. Satin Coat Steel-Painted Material:18Coat Steel-PaintedDescription:Ga.SideSatinWindscreen Description:WindscreenTo be used inSideoperationbelow -5 C Tobe used inoperationDimensionUnits:inchesbelow -5 C DimensionScale: NTSUnits: inches24-15/32" Scale:NTSWeight:4lbs.24-15/32" it: inchUnit: 7/8"24-15/32"24-15/32"Specifications are subject to change without notice. 2015 Mitsubishi Electric US, Inc.Specifications are subject to change without notice. 2015 Mitsubishi Electric US, Inc.Specifications:Specifications: Material:18 Ga. Satin Coat Steel-PaintedSpecifications are subject to change without notice. Material:18SatinCoat Steel-PaintedDescription:Ga.RearWindscreen 2019 Mitsubishi Electric Trane HVAC US LLC

FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-REJob NSEngineer:Submitted To:WB-SD5SubmittedWB-SD2Submitted To:By:WB-SD2Submitted By:Location:Location:UnitDesignation: Schedule No.UnitDesignation:No.ModelNo. PE-SD-24-36DIMENSIONS: WB-SD2andScheduleWB-RE2ModelNo. PE-SD-24-36DIMENSIONS:WB-SD2and WB-RE2For: ReferenceApprovalFor: ReferenceApprovalUnit: : inchConstructionWB-RE2WB-RE5Job :Submitted To:Submitted To:By:Submitted By:Location:Location:UnitDesignation: Schedule No.Unit Designation:Schedule No.ModelNo. r: Reference8"ApprovalFor: : Material:18 Ga. Satin Coat Steel-Painted Material:18Coat Steel-PaintedDescription:Ga.SideSatinWindscreen Description:WindscreenTo be used inSideoperationbelow -5 C Tobe used inoperationDimensionUnits:inchesbelow -5 C27" DimensionScale: 8"NTSUnits: inches27" Scale:NTSWeight:7lbs8" t: inchUnit: inchSpecifications are subject to change without notice.Specifications are subject to change without notice.Material:18 Ga. Satin Coat Steel-PaintedMaterial:18Ga. Satin Coat Steel-PaintedWeight:19lbs.Weight:19lbs.Tobe used in operation below -5 CSpecifications are subject to changeTobe withoutused innotice. operation below -5 CNotes:Notes:8"8"35-3/8"35-3/8"35-3/8"35-3/8"8" 8"WB-RE2 2015 Mitsubishi Electric US, Inc. 2015 Mitsubishi Electric US, Inc.Scale: NTSScale:Description:NTSRear WindscreenDescription:Rear WindscreenDimensionUnits: inches 2019 Mitsubishi Electric Trane HVAC US LLCDimension Units: inches

DIMENSIONSWB-SD3WB-SD6For: ReferenceApproval0.75"3/4"SIDE ADVANCEDDIMENSIONS: -RE3ConstructionUnit: inch3/4"0.75"8"8.0"8"8.0"0.75"3/4"Location:Unit Designation: Schedule No.WINDBAFFLEWB-PA/WB-SD/WB-REModelNo. PE-RE-426.9"6-31/32"Unit: inch3/4"0.75"Job Name:Purchaser:FRONT,Engineer:REAR ANDLocation:Submitted To:Unit Designation: Schedule No.Submitted By:Model No. 8"8.0"Location:Unit Designation: Schedule No.Model No. PE-RE-42Specifications:ow -5 CSIONS: WB-SD3WB-RE3For:andReferenceApprovalConstruction Material:18Ga. Satin CoatSteel-Painted Description: Side Windscreen To be used in cooling operation below -5 C3/4"Unit: inch0.75" Dimension Units: inches Scale: NTS ed for MITSUBISHI ELECTRIC US, INC.1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.comFORM# ADVANCED WIND BAFFLE WB-SD/WB-RE - 201511Ver2Specifications are subject to change without notice. 2015 Mitsubishi Electric US, Inc.el-PaintedSpecifications are subject to change without notice. n below -5 C 2019 Mitsubishi Electric Trane HVAC US LLC

FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-REAPPENDIX - PREVIOUS GENERATION COMPATIBILITYFront Wind (2)WBPA52PUMY-P36NKMU1(1)Advanced Side Wind Baffles Advanced Rear Wind 2111WB-PA2 is replaced by WB-PA5WB-SD2 is replaced by WB-SD5WB-RE2 is replaced by WB-RE5COOLING TEMPERATURE OPERATION RANGE WITH WIND BAFFLESModelSeriesOperation RangeWithout Wind BafflesFront WindBaffles OnlyFront Advanced Side Advanced Rear Wind BafflesPUZ-423 F - 115 F0 FN/APUY-423 F - 115 F0 FN/APUZ-523 F - 115 F0 FN/APUY-523 F - 115 F0 FN/APUZ-623 F - 115 F0 FN/APUY-6*23 F - 115 F0 F-20 F*PUY-A42NHA6 units do not have the extended cooling range below 0 F1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.comSpecifications are subject to change without notice. 2019 Mitsubishi Electric Trane HVAC US LLC

mitsubishi electric wind baffle - wb-pa3 mr. slim p-series pumy-60 submittal wb-pa3 description description c description d description e description f description g description proprietary and confidential the information contained in this drawing is the sole property

Related Documents:

rear front base pairs rear front 1-pc multi-slot bases ext multi-slot bases rear front rear front anschutz . rear front base pairs rear front 1-pc multi-slot bases ext multi-slot bases rear front rear front} topper 30, 22 jet & mod 158 (pre 1973) 18 60a (48064)} handy rifle 82 (48082) herters} j9 45 (48045) 46 (48046) 402 (48108) s45 (48226 .

body-colored rear roof spoiler high beam control rear privacy glass interior interior dimensions & capacities headroom, front/rear without moonroof (in) headroom, front/rear with moonroof (in) shoulder room, front/rear (in) hip room, front/rear (in) epa cargo volume, rear seatback up/folded (

Scion XA front and rear locations 2004-2007 Scion XB front location 2004-2012 Scion XB rear location 2008-2012 Scion XD front and rear locations 2008-2011 Toyota 4Runner rear location 2003-2012 Toyota Avalon rear location 2005-2011 Toyota Celica front and rear locations 2000-2005 Toyota Corolla front

66 21 2 359 135 BMW Advanced Car Eye retrofit kit (front and rear camera) 66 21 2 359 136 BMW Advanced Car Eye retrofit kit (front camera) 66 21 2 364 600 BMW Advanced Car Eye retrofit kit (front and rear camera) 66 21 2 364 601 BMW Advanced Car Eye retrofit kit (front camera) 66 21 2 288 543 BMW Advanced Car Eye retrofit kit (front and rear .

Dry Weight 91kg / 201 lbs. Suspension www.Get2itParts.com Front Telescopic Fork Rear Unit Swing Arm / Single Shock Brakes Front Hydraulic Disc Rear Hydraulic Disc Tires Front 120/90-10 Rear 130/90-10 Tire Pressure Front Front 18psi / 1.25kg/cm2 (Cold) Rear Rear 25psi / 1.75kg/

10. Install and route front brake lines REAR INSTALLATION STEPS 11. Prepare vehicle, rear 12. Removal of rear brake calipers & hubs 13. Install bushings into backing plate assembly 14. Install rear backing plate assembly 15. Rear portal box assembly 16. Install rear portal box 17. Install rear drive shaft jam nut & portal box lid cap 18.

ACCESSORIES (ORDERED SEPARATELY) Catalog Number Description ASL1-HSS-90-B-XXX 1 House Side Shield Back 90 deg ASL1-HSS-90-F-XXX 1 House Side Shield Front 90 deg ASL1-HSS-90-S-XXX 1 House Side Shield Side 90 deg ASL1-HSS-270-BSS-XXX 1 House Side Shield Back, Side & Side 270 deg ASL1-HSS-270-FSS-XXX 1 House Side Shield Front, Side & Side 270 deg .

item qty. number description req'd 100 front flange 1 102 front flange extra 1 103 rear flange 1 104 rear flange extra 1 105* foot bracket - front 1 106* foot bracket - screw 2 107* foot bracket - rear 1 112 clevis pin 1 117 intermediate trunnion 1 108* end lug - front 2 110* end lug - rear 2 *not available on 10", and larger bore cylinders. front flange .