Cree XP-E2 LEDs
CLD-DS56 REV 12PRODUCT FAMILY DATA SHEETCree XLamp XP-E2 LEDsPRODUCT DESCRIPTIONFEATURESThe XLamp XP-E2 LED builds on the unprecedented performance of the original XP-E by increasing lumen output upwhite, royal blue, blue, green, PC amber, amber, red-orange,to 20% while providing a single die LED point source for preciseWWW.CREE.COM/XLAMPAvailable in white, outdoor white, 80-CRI, 85-CRI, 90-CRIred, photo red & far redoptical control. The XP‑E2 LED shares the same footprint as the ANSI-compatible chromaticity binsoriginal XP‑E, providing a seamless upgrade path to more lumens White binned at 85 Cand/or greater efficiency while shortening the design cycle for Maximum drive current: 1 Aexisting XP customers. Low thermal resistance: as low as 4 C/W Wide viewing angle: 110 -140 XLamp XP-E2 LEDs are the ideal choice for lighting applications Unlimited floor life at 30 C/85% RHwhere high light output and maximum efficacy are required, Reflow solderable - JEDEC J‑STD‑020C compatiblesuch as LED retrofit lamps, outdoor, portable, indoor directional, Electrically neutral thermal pathemergency vehicle or architectural. RoHS and REACh compliant UL recognized component (E349212)Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo andXLamp are registered trademarks of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.Downloaded from Arrow.com.Cree, Inc.4600 Silicon DriveDurham, NC 27703USA Tel: 1.919.313.5300
XLAMP XP-E2 LEDTABLE OF CONTENTSCharacteristics. 3Flux Characteristics - White. 4Flux Characteristics - Color. 10Relative Spectral Power Distribution. 16Relative Flux vs. Junction Temperature. 17Electrical Characteristics - White. 18Electrical Characteristics - Color. 18Relative Flux vs. Current - White. 19Relative Flux vs. Current - Color. 19Relative Chromaticity vs. Current and Temperature. 20Typical Spatial Distribution. 21Thermal Design. 22Performance Groups - Luminous Flux. 24Performance Groups - Radiant Flux. 25Performance Groups - Chromaticity. 26Performance Groups - Dominant Wavelength. 29Performance Groups - Peak Wavelength. 30Performance Groups - Forward Voltage. 30Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve. 31Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions. 32Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions. 33Cree’s PC Amber Kit Plotted on the 1931 CIE Curve. 34Cree’s 2200 K CCT White Kits Plotted on ANSI Standard Chromaticity Regions. 35Cree’s Standard Chromaticity Kits. 36Bin and Order Code Formats. 37Reflow Soldering Characteristics. 38Notes. 39Mechanical Dimensions. 41Tape and Reel. 42Packaging. 43Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL andthe UR logo are registered trademarks of UL LLC.2Downloaded from Arrow.com.
XLAMP XP-E2 LEDCHARACTERISTICSCharacteristicsUnitThermal resistance, junction to solder point - white C/W10Thermal resistance, junction to solder point - royal blue, blue C/W9Thermal resistance, junction to solder point - green C/W15Thermal resistance, junction to solder point - PC amber C/W9Thermal resistance, junction to solder point - amber C/W7Thermal resistance, junction to solder point - red-orange, red C/W4Thermal resistance, junction to solder point - photo red, far red C/W8Viewing angle (FWHM) - whitedegrees110Viewing angle (FWHM) - royal blue, blue, greendegrees135Viewing angle (FWHM) - PC amberdegrees110Viewing angle (FWHM) - amber, red-orange, red, photo reddegrees130Viewing angle (FWHM) - far reddegrees140Temperature coefficient of voltage - whitemV/ C-1.2Temperature coefficient of voltage - royal blue, bluemV/ C-3.3Temperature coefficient of voltage - greenmV/ C-3.8Temperature coefficient of voltage - PC ambermV/ C-2.5Temperature coefficient of voltage - amber, red-orange, redmV/ C-1.8Temperature coefficient of voltage - photo redmV/ C-1.6Temperature coefficient of voltage - far redmV/ C-1.0ESD withstand voltage (HBM per Mil-Std-883D)- white, royal blue, blue, greenTypicalVESD classification (HBM per Mil-Std-883D) - PC amber, amber, red-orange, red, photo red, far redDC forward currentMinimumMaximum8000Class 2mA1000Reverse voltageV5Forward voltage (@ 350 mA, 85 C) - whiteV2.83Forward voltage (@ 700 mA, 85 C) - whiteV2.99Forward voltage (@ 1000 mA, 85 C) - whiteV3.12Forward voltage (@ 350 mA, 25 C) - royal blue, blueV3.1Forward voltage (@ 1000 mA, 25 C) - royal blue, blueV3.4Forward voltage (@ 350 mA, 25 C) - greenV3.2Forward voltage (@ 1000 mA, 25 C) - greenV3.7Forward voltage (@ 350 mA, 25 C) - PC amberV3.05Forward voltage (@ 1000 mA, 25 C) - PC amberV3.28Forward voltage (@ 350 mA, 25 C) - amber, red-orange, red,V2.18Forward voltage (@ 1000 mA, 25 C) - amber, red-orange, redV2.6Forward voltage (@ 350 mA, 25 C) - photo redV2.05Forward voltage (@ 1000 mA, 25 C) - photo redV2.42Forward voltage (@ 350 mA, 25 C) - far redV1.85Forward voltage (@ 1000 mA, 25 C) - far redV2.24LED junction temperature C3.13.53.83.52.62.52.4150Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL andthe UR logo are registered trademarks of UL LLC.3Downloaded from Arrow.com.
XLAMP XP-E2 LEDFLUX CHARACTERISTICS - WHITE (TJ 85 C)The following tables provide order codes for XLamp XP-E2 white LEDs. For a complete description of the order code nomenclature,please see the Bin and Order Code Formats section (page 37). For definitions of the chromaticity kits, please see the Cree’s StandardChromaticity Kits section (page 36).ChromaticityKit515350E1E2CCT6200 K6000 K6200 K6500 K5700 KMinimum Luminous Flux @350 mACalculated MinimumLuminous Flux (lm)**@ 85 COrder CodesCodeFlux (lm)@ 85 CFlux (lm)@ 25 C*700 mA1.0 A70 CRI 0-00CE2Notes: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements.See the Measurements section (page 39). Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimumspecified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.*Flux values @ 25 C are calculated and for reference only.** Calculated flux values at 700 mA and 1 A are for reference only.Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL andthe UR logo are registered trademarks of UL LLC.4Downloaded from Arrow.com.
XLAMP XP-E2 LEDFLUX CHARACTERISTICS - WHITE (TJ 85 C) - CONTINUEDChromaticityKitE3F4E4F5E5Z5Minimum Luminous Flux @ 350 mACCT5000 K4750 K4500 K4250 K4000 K4000 KCalculated MinimumLuminous Flux (lm)**@ 85 COrder CodesCodeFlux (lm)@ 85 CFlux (lm)@ 25 C*700 mA1.0 A70 CRI 09266XPEBWT-01-0000-00FE3XPEBWT-01-0000-00EE375 CRI Typical80 CRI -H1-0000-00BZ5Notes: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements.See the Measurements section (page 39). Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimumspecified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.*Flux values @ 25 C are calculated and for reference only.** Calculated flux values at 700 mA and 1 A are for reference only.Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL andthe UR logo are registered trademarks of UL LLC.5Downloaded from Arrow.com.
XLAMP XP-E2 LEDFLUX CHARACTERISTICS - WHITE (TJ 85 C) - CONTINUEDChromaticityKitF6E6Z6F7CCTMinimum LuminousFlux @ 350 mACalculated MinimumLuminous Flux (lm)**@ 85 C**Order CodesCodeFlux(lm) @85 CFlux(lm) @25 C*700 mA1.0 A70 CRI 0-00AF73750 K3500 K3500 K3250 K80 CRI Typical80 CRI Minimum85 CRI Minimum90 CRI MinimumNotes: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements.See the Measurements section (page 39). Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimumspecified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.*Flux values @ 25 C are calculated and for reference only.** Calculated flux values at 700 mA and 1 A are for reference only.Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL andthe UR logo are registered trademarks of UL LLC.6Downloaded from Arrow.com.
XLAMP XP-E2 LEDFLUX CHARACTERISTICS - WHITE (TJ 85 C) - CONTINUEDChromaticityKitE7Z7CCTMinimum LuminousFlux @ 350 mACalculated MinimumLuminous Flux (lm)**@ 85 C**CodeFlux(lm) @85 CFlux(lm) @25 C*700 mA1.0 A70 CRI Typical80 CRI 8P373.985.8P267.2Q585 CRI Minimum90 CRI 0000-007Z7XPEBWT-U10000-007Z73000 K3000 KOrder Codes80 CRI MinimumXPEBWT-P10000-00AZ7Notes: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements.See the Measurements section (page 39). Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimumspecified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.*Flux values @ 25 C are calculated and for reference only.** Calculated flux values at 700 mA and 1 A are for reference only.Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL andthe UR logo are registered trademarks of UL LLC.7Downloaded from Arrow.com.
XLAMP XP-E2 LEDFLUX CHARACTERISTICS - WHITE (TJ 85 C) - CONTINUEDChromaticityKitF8E8CCTMinimum LuminousFlux @ 350 mACalculated MinimumLuminous Flux (lm)**@ 85 C**Order CodesCodeFlux(lm) @85 CFlux(lm) @25 C*700 mA1.0 50 K2700 K70 CRI Typical80 CRI Typical80 CRI Minimum85 CRI Minimum90 CRI MinimumNotes: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements.See the Measurements section (page 39). Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimumspecified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.*Flux values @ 25 C are calculated and for reference only.** Calculated flux values at 700 mA and 1 A are for reference only.Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL andthe UR logo are registered trademarks of UL LLC.8Downloaded from Arrow.com.
XLAMP XP-E2 LEDFLUX CHARACTERISTICS - WHITE (TJ 85 C) - CONTINUEDChromaticityKitZ8EAZACCT2700 K2200 K2200 KMinimum LuminousFlux @ 350 mACalculated MinimumLuminous Flux (lm)**@ 85 C**Order CodesCodeFlux(lm) @85 CFlux(lm) @25 C*700 mA1.0 H10000-006ZA70 CRI Typical80 CRI Typical80 CRI Minimum85 CRI Minimum90 CRI MinimumXPEBWT-P10000-009Z8Notes: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements.See the Measurements section (page 39). Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimumspecified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.*Flux values @ 25 C are calculated and for reference only.** Calculated flux values at 700 mA and 1 A are for reference only.Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL andthe UR logo are registered trademarks of UL LLC.9Downloaded from Arrow.com.
XLAMP XP-E2 LEDFLUX CHARACTERISTICS - COLOR (TJ 25 C)The following tables provide order codes for XLamp XP-E2 color LEDs. For a complete description of the order-code nomenclature, pleasesee the Bin and Order Code Formats section (page 37).ColorMinimum Radiant Flux@ 350 mAGroup30313233Flux 1.801.901.99Royal ominant Wavelength (nm)MinimumMaximumOrder 3450D4460XPEBRY-L1-0000-00S02Note: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements, 2 on CRI measurements and 1 on dominant wavelength measurements. See the Measurements section (page 39). Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimumspecified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.*Calculated Photosynthetic Photon Flux (PPF) values are for reference only.Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL andthe UR logo are registered trademarks of UL LLC.10Downloaded from Arrow.com.
XLAMP XP-E2 LEDFLUX CHARACTERISTICS - COLOR (TJ 25 C) - CONTINUEDColorMinimum LuminousFlux (lm) @ 350 mAGroupFlux (lm)K230.6K335.2BlueM2M339.845.7Dominant Wavelength (nm)MinimumMaximumOrder 000-00302B4470B5480XPEBBL-L1-0000-00305Note: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements, 2 on CRI measurements and 1 on dominant wavelength measurements. See the Measurements section (page 39). Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimumspecified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL andthe UR logo are registered trademarks of UL LLC.11Downloaded from Arrow.com.
XLAMP XP-E2 LEDFLUX CHARACTERISTICS - COLOR (TJ 25 C) - CONTINUEDColorMinimum LuminousFlux (lm) @ 350 mAGroupFlux Q4GreenR3R4PC olorGroup1.041221.18Color BinY2Order 6100Q5Dominant Wavelength (nm)Minimum Luminous Flux(lm) @ 350 mAOrder CodesGroupFlux -00D01Note: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements, 2 on CRI measurements and 1 on dominant wavelength measurements. See the Measurements section (page 39). Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimumspecified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.*Calculated Photosynthetic Photon Flux (PPF) values are for reference only.Copyright 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. UL andthe UR logo are registered trademarks of UL LLC.12Downloaded from Arrow.com.
XLAMP XP-E2 LEDFLUX CHARACTERISTICS - COLOR (TJ 25 C) - CONTINUEDColorMinimum LuminousFlux (lm) @ 350 mAGroupFlux (lm)N462.0P267.2AmberP3P4Q273.980.687.4Dominant Wavelength (nm)MinimumMaximumOrder PEBAM-L1-0000-00A01Note: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements, 2 on CRI measurements and 1 on dominant wavelength measurements. See the Measurements section (page 39). Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimumspecified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restr
6 122 142 209 266 xpebwt-01-0000-00ff4 xpebwt-l1-0000-00ff4 r2 114 195 249 xpebwt-01-0000-00ef4 xpebwt-l1-0000-00ef4 q5 107 124 xpebwt-l1-0000-00df4 q4 100 116 171 218 xpebwt-l1-0000-00cf4 e4 4500 k r4 151 284 xpebwt-01-
J Series Products that are submitted to Cree, Inc. or any of its other subsidiaries will be directed to Cree Venture for acknowledgement WWW.CREE.COM/JSERIES and order fulfillment. CLJ-DS8 REV 3C Cree J Series 2835 LEDs PRODUCT DESCRIPTION J Series LEDs extend Cree's industry‑leading portfolio of
XLAMP MK-R LED 2012-2021 Cree LED. The inormation in this document is suect to change without notice. Cree and the Cree logo are registered trademars, and the Cree LED logo is a trademar, o Cree, Inc. XLamp , EasyWhite and SC3 Technology are registered trademars o Cree
Cree and the Cree logo are registered trademarks, and the Cree LED logo is a trademark, of Cree, Inc. CLD-CT1523 REV 1 8 KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Cree LEDs are sold by order codes in combinations of bins called kits.
CREE Silicon Carbide MOSFET Evaluation Kit User's Manual This document is prepared as a user reference guide to install and operate CREE evaluation hardware. Safety Note: Cree designed evaluation hardware is meant to be an evaluation tool in a lab setting for Cree components and to be handled and operated by highly qualified .
This document provides the results of IES LM-80-2008, LM-80-2015, and LM-80-2021 (“LM-80”) testing on Cree LED components. Cree LED is providing this data so that the public can verify the reliability of Cree LEDs as part of a complete LED lighting system. Note that this d
This document provides the results of Cree’s IES LM-80-2008 (“LM-80”) testing on its LED components. Cree is providing this data so that the public can verify the reliability of Cree LEDs as part of a complete LED lighting system. Note that this document only provides the end results of the LM-80 tests. This is not a
Cree, Inc. 4 Silicon Drive Durham, NC 23 USA Tel 1.919.313.3 WWW.CREE.COM/XLAMP CLD-DS76 REV 2I Cree XLamp MK-R2 LEDs PRODUCT DESCRIPTION The XLamp MK-R2 EasyWhite LED builds on the breakthrough performance of the original MK-R by enabling high-voltage driver solutions while providing a small, uniform, single point source for precise .
** Cree XLamp MK-R LED order codes specify only a minimum fluxbin and not a maximum. Cree may ship reels in flux Cree may ship reels in flux bins higher than the minimum specifiedby the order code without advance notice.
