ISO 9001:2000 Forged Steel Valves
BONNEY FORGEPRICE SCHEDULE FSV-830Effective August 18, 2008Subject to change without noticeBONNEY FORGE14496 Croghan PikeP.O. Box 330Mt. Union, PA e.comISO 9001:2000Certificate Number: 30116Forged SteelValves
ALLOY & STAINLESS FORGED STEEL VALVESBONNEY FORGEThe following listed valves are available on application in: F316 Body and Bonnet, Trim F316 S.S. F316L Body and Bonnet, Trim F316L S.S. - 5% Cr., 1/2 Moly Steel, (F5) Body and Bonnet, Trim 13% Cr.,S.S. (F6) H.F.S. - 1 1/4% Cr., 1/2 Moly Steel, (F11) Body and Bonnet, Trim 13% Cr., S.S. (F6) H.F.S. 2 1/4% Cr., 1 Moly Steel, (F22) Body and Bonnet, Trim 13% Cr., S.S. (F6) H.F.S.GATE VALVEClass 800– Bolted Bonnet or Seal Welded BonnetBolted Gland - O.S.&Y.VALVOLET Female End - Threaded or Socket WeldMale End - Extended WELDOLET or Lip EndExtended Body - Welded Bonnet - O.S.&Y.Extended Bonnet - Bolted Gland - O.S.&Y.Cryogenic Service or Bellows SealedClass 1500 – Bolted Bonnet - Bolted Gland - O.S.&Y.Class 150–300–600–1500–2500 – Integral Flanged EndsBolted Bonnet - Bolted Gland - O.S.&Y.GLOBE VALVEClass 800– Bolted Bonnet or Seal Welded Bonnet - Bolted Gland - O.S.&Y.Typical or Seal Welded Bonnet “Y” Pattern configurationExtended Bonnet - Bolted Gland - O.S.&Y.Cryogenic Service or Bellows SealedClass 1500 – Bolted Bonnet - Bolted Gland - O.S.&Y.Typical or Seal Welded Bonnet “Y” Pattern configurationClass 2500 – Seal Welded Bonnet - Bolted Gland O.S.&Y.Typical or Seal Welded Bonnet “Y” Pattern configurationClass 150–300–600–1500–2500 – Integral Flanged EndsBolted Bonnet - Bolted Gland - O.S.&Y.PISTON CHECK VALVEClass 800– Bolted Cap or Seal Welded CapTypical or Seal Welded Cap “Y” Pattern configurationClass 1500 – Bolted CapClass 2500 – Seal Welded CapClass 150–300–600–1500–2500 – Integral Flanged EndsBolted CapBALL CHECK VALVEClass 800– Bolted Cap or Seal Welded CapClass 1500 – Bolted CapClass 150–300–600–1500–2500 – Integral Flanged EndsBolted CapSWING CHECK VALVEClass 800 – Bolted CapClass 1500 – Bolted CapClass 150–300–600–1500–2500 – Integral Flanged EndsBolted CapUnless otherwise noted, the above Valves have Threaded or Socket Weld Ends and are available in Conventional or Full Port.*Class 1500 Y Pattern is rated class 1690*Class 2500 Y Pattern is rated class 2690
TABLE OF CONTENTSBONNEY FORGECLASS 800 - BOLTED BONNET - Threaded and Socket Weld Ends . A/SCSGate & Globe: Conventional & Full Port . 59Check: Piston-Ball . 59Check: Swing . 610CLASS 800 - SEAL WELDED BONNET - Threaded and Socket Weld EndsGate & Globe: Conventional & Full Port . IFC10Check: Piston . IFC10Check: Ball . IFC11CLASS 800 - SEAL WELDED BONNET - Threaded and Socket Weld Ends “Y” PatternGlobe: “Y” Pattern . IFC11Check: Piston “Y” Pattern . IFC11CLASS 1500 - BOLTED BONNET - Threaded and Socket Weld EndsGate, Globe, Check (Piston, Ball, Swing) . IFC/6 11/12SPECIFIC PURPOSE VALVESCLASS 2500 - Globe - Seal Welded Bonnet - Threaded & Socket Weld Ends - Full & Conventional Port .Gate - Seal Welded Bonnet - Threaded & Socket Weld Ends - Full & Conventional Port .CLASS 800 - Cryogenic Service - Gate - Full & Conventional Port .CLASS 800 - Cryogenic Service - Globe - Full & Conventional Port .CLASS 800 - Bellows Sealed Valve - Gate - Full & Conventional Port .CLASS 800 - Bellows Sealed Valve - Globe - Full & Conventional Port .CLASS 800 - Valvolet .CLASS 800 - Extended Body Valve - Gate .66IFCIFCIFCIFC77121212131313CLASS 150-300-600-1500-2500 - Gate - B.B.O.S.&Y. . 8CLASS 150-300-600-1500-2500 - Globe - B.B.O.S.&Y. . 8CLASS 150-300-600-1500-2500 - Check - Piston & Ball. IFCCLASS 150-300-600-1500-2500 - Check - Swing . IFCCLASS 1500-2500 - Globe - Seal Welded Bonnet “Y” Pattern . IFC/7HOW TO ORDER . 3/4STANDARD BODY-TRIM MATERIALS . 2COMPARISON CHART . 17CONDITION OF SALE . BC13141415153/4217BCFLANGED END VALVESMINIMUM ORDER CHARGE – 50.00TERMS - 1% 10-25th prox. net 30 days. Subject to change without notice.FREIGHT POLICY - All prices and shipments are F.O.B. plant of manufacture. Our responsibility ceases after we make delivery to the carrier. Claims for damages, loss or delay in transitshould be made to the carrier. Full freight will be allowed on individual orders of 1500# or more. Individual orders totaling less than 1500# are not subject to freight allowance. Allowances arebased on lowest published rates for rail or motor freight to all rail points or highway points listed in published tariffs. Freight allowances do not include delivery to building sites beyond theserail or highway points. Whenever a buyer specifies a more expensive method of shipment, the difference in transportation cost is for buyer’s account.Alternate body-trim material or construction other than those listed are priced on application.Full stellite, special packaging, gaskets or flange facing are priced on application.IFC Inside front coverBC Back cover1
STANDARD BODY-TRIM MATERIALSBONNEY FORGEBonney Forge reserves the right to quote material combinations different than those listed here. The chartbelow lists the standard body trim material combinations, usually available from Bonney Forge Valve. “S”indicates standard, alternate materials are available on request.800# - 1500#BOLTED BONNET800#WELDED BONNET1500# & 2500#WELDED BONNETFig. NumberBELLOWSSEALEDCRYOGENIC150# & 300#FLANGED ENDBodyDisc.Seat (1)StemSA 10513 Cr.13 Cr. HF13 Cr.316L GraphiteSLF2F316F316 HFF316AlloySteelSF5-F11F22-F913 Cr.13 Cr. arbonSteelSA alCarbonSteelLow Temp.SteelBolting (4)TrimGasket (2)Packing (3)Body (5)Packing (5)GraphiteB7 (2H)B6316L GraphiteGraphiteL7M (G8)B8/G813 Cr.316L GraphiteGraphiteB16 (2H)B6 (2H)304 HF304L HF316 HF316L HF304304L316316L316L GraphiteGraphiteB8 (G8)B8/G813 Cr.13 Cr. HF13 Cr.316L GraphiteGraphite–B6 (2H)F5-F9F11-F1213 Cr.13 Cr. HF13 Cr.316L GraphiteGraphite–B6 (2H)SF304F304LF316F316L304304L316316L304 HF304L HF316 HF316L HF304304L316316L316L GraphiteGraphite–B8/G8Manuf.Valve TypeManuf.STANDARD BODY-TRIM MATERIALSBodyGasket (2)Packing (3)Bolting (4)TrimDisc.Seat (1)StemBody (5)Packing (5)GraphiteB7 (2H)B6316L GraphiteGraphiteB8 (G8)B8 (G8)304304L316316L316L GraphiteTeflonB8 (G8)B8 (G8)13 Cr. HF13 Cr.316L GraphiteGraphiteB7 (2H)B613 Cr.13 Cr. HF13 Cr.316L GraphiteGraphiteB16 (2H)B6 (2H)304304L316316L304 HF304L HF316 HF316L HF304304L316316L316L GraphiteGraphiteB8 (G8)B8 (G8)13 Cr.316L Graphite304 HF304L HF316 HF316L HF304304L316316L304304L316316L304 HF304L HF316 HF316L HFA 10513 Cr.SF5-F9F11F12SF304F304LF316F316LCarbonSteelSA 10513 Cr. HF13 Cr. HFStainlessSteelSF304F304LF316F316L304 HF304L HF316 HF316L oySteelStainlessSteel(1) Symbol “HF” for slellite hard faced.(2) All spiral-wound gaskets, metal/filler.(3) Graphite packing and gaskets are used as standard.(4) Symbols ( ) refer to nuts, when used.(5) First symbol refers to studs, second symbol to nuts.2
HOW TO ORDERBONNEY FORGE1.2.3.4.5.6.7.Specify Valve SizeSelect Valve Description from Section ASelect Valve Type desired from Section BIndicate Body/Bonnet and Trim Material from Section CSelect End Configuration from Section DSelect Special Requirement(s) from Section ESpecify as a Suffix String, after Section D or E, any Body/BonnetMaterial, Trim Material or Special Requirements not listed belowSection A - Valve Description (Continued)Section A - Valve CW1CWL3C3CL3CW3CWLFull Port, 800#, Bolted BonnetConventional Port, 800#, Bolted BonnetFull Port, 800#, Welded BonnetConventional Port, 800#, Welded BonnetFull Port, 1500#, Bolted BonnetConventional Port, 1500#, Bolted BonnetFull Port, 1500#, RTJ Bolted BonnetFull Port, 2500#, RTJ Bolted BonnetFull Port, 1500#, Welded BonnetConventional Port, 1500#, Welded BonnetFull Port, 2500#, Welded BonnetFull Port, 4500#, Welded BonnetFull Port, 800#, Y-Pattern Body, Welded BonnetFull Port, 1500#, Y-Pattern Body, Welded BonnetFull Port, 1690#, Y-Pattern Body, Welded BonnetFull Port, 2500#, Y-Pattern Body, Welded BonnetFull Port, 2680#, Y-Pattern Body, Welded BonnetFull Port, 4500#, Y-Pattern Body, Welded Bonnet150# Integral Flange, Full Port, Bolted Bonnet300# Integral Flange, Full Port, Bolted Bonnet600# Integral Flange, Full Port, Bolted Bonnet1500# Integral Flange, Full Port, Bolted Bonnet2500# Integral Flange, Full Port, Bolted Bonnet150# Integral Flange, Conventional Port, Bolted Bonnet300# Integral Flange, Conventional Port, Bolted Bonnet600# Integral Flange, Conventional Port, Bolted BonnetCryogenic, Full Port, 800#, Bolted BonnetCryogenic, Conventional Port, 800#, Bolted BonnetCryogenic, Full Port, 800#, Welded BonnetCryogenic, Conventional Port, 800#, Welded BonnetCryogenic, Full Port, 1500#, Bolted BonnetCryogenic, Conventional Port, 1500#, Bolted BonnetCryogenic, Full Port, 1500#, Welded BonnetCryogenic, Conventional Port, 1500#, Welded BonnetCryogenic, 150# Integral Flange, Full Port, Bolted BonnetCryogenic, 150# Integral Flange, Conventional Port, Bolted BonnetCryogenic, 150# Integral Flange, Full Port, Welded BonnetCryogenic, 150# Integral Flange, Conventional Port, Welded BonnetCryogenic, 300# Integral Flange, Full Port, Bolted BonnetCryogenic, 300# Integral Flange, Conventional Port, Bolted BonnetCryogenic, 300# Integral Flange, Full Port, Welded BonnetCryogenic, 300# Integral Flange, Conventional Port, Welded SF15SHWFVOLLVOLVLLVL9VOLL9VOL9VLL9VLCryogenic, 600# Integral Flange, Full Port, Bolted BonnetCryogenic, 600# Integral Flange, Conventional Port, Bolted BonnetCryogenic, 600# Integral Flange, Full Port, Welded BonnetCryogenic, 600# Integral Flange, Conventional Port, Welded BonnetCryogenic, 1500# Integral Flange, Full Port, Bolted BonnetCryogenic, 1500# Integral Flange, Full Port, Welded BonnetBellows Sealed, Full Port, 800#, Bolted BonnetBellows Sealed, Conventional Port, 800#, Bolted BonnetBellows Sealed, Full Port, 800#, Welded BonnetBellows Sealed, Conventional Port, 800#, Welded BonnetBellows Sealed, Full Port, 1500#, Bolted BonnetBellows Sealed, Conventional Port, 1500#, Bolted BonnetBellows Sealed, Full Port, 1500#, Welded BonnetBellows Sealed, Conventional Port, 1500#, Welded BonnetBellows Sealed, Full Port, 2500#, Welded BonnetBellows Sealed, 150# Integral Flange, Full Port, Bolted BonnetBellows Sealed, 150# Integral Flange, Conv. Port, Bolted BonnetBellows Sealed, 150# Integral Flange, Full Port, Welded BonnetBellows Sealed, 150# Integral Flange, Conv. Port, Welded BonnetBellows Sealed, 300# Integral Flange, Full Port, Bolted BonnetBellows Sealed, 300# Integral Flange, Conv. Port, Bolted BonnetBellows Sealed, 300# Integral Flange, Full Port, Welded BonnetBellows Sealed, 300# Integral Flange, Conv. Port, Welded BonnetBellows Sealed, 600# Integral Flange, Full Port, Bolted BonnetBellows Sealed, 600# Integral Flange, Conv. Port, Bolted BonnetBellows Sealed, 600# Integral Flange, Full Port, Welded BonnetBellows Sealed, 600# Integral Flange, Conv. Port, Welded BonnetBellows Sealed, 1500# Integral Flange, Full Port, Bolted BonnetBellows Sealed, 1500# Integral Flange, Full Port, Welded BonnetValvolet Extended Body, Lip End, Conv. Port, 800#, Welded BonnetValvolet Extended Body, O’Let End, Conv. Port, 800#, Welded BonnetValvolet Extended Body, Lip End, Conv. Port, 800#, Bolted BonnetValvolet Extended Body, O’Let End, Conv. Port, 800#, Bolted BonnetValvolet Extended Body, Lip End, Conv., 1500#, Welded BonnetValvolet Extended Body, O’Let End, Conv. Port, 1500#, Welded BonnetValvolet Extended Body, Lip End, Conv. Port, 1500#, Bolted BonnetValvolet Extended Body, O’Let End, Conv. Port, 1500#, Bolted BonnetMFLML9MFL9MLExtended Body, Conventional Port, 800#, Bolted BonnetExtended Body, Conventional Port, 1500#, Welded BonnetExtended Body, Conventional Port, 1500#, Bolted BonnetExtended Body, Conventional Port, 800#, Welded BonnetSection B - Valve Type133R44R55R63GateGlobeGlobe with Renewable SeatsPiston CheckPiston Check with Renewable SeatsBall CheckBall Check with Renewable SeatsSwing Check
HOW TO ORDERBONNEY FORGESection C - Body/Bonnet, Trim MaterialSection C - Body/Bonnet, Trim Material 8HF99FAAFLSLFL3SL3FOFor an item not listed to the left, a figure number can be determined from the following:Body/BonnetFirst CodeTrimSecondMaterialNumber/LetterMaterialCode LetterA EF304, 304L, 304H7, 7L, 7HF321/FHFEFF316, 316L, 316H8, 8L, 8HF347/HFG317, 317LB, BLF347/FHFGFF321, 321HE, EHF44JF347, 347HG, GHF44/HFJSF44JF44/FHFJFF51DAlloy 20A2F51/HFDSMonel 400M4F51/FHFDFMonel 500M5Alloy 20A2Hastelloy BHBAlloy 20/HFA2SHastelloy CHCAlloy 20/FHFA2FIncoloy 800I800Monel 400M4Incoloy 825I825Monel 400/HFM4SMonel 400/FHFM4FMonel 500M5F51DMonel 500/HFM5SMonel 500/FHFM5FHastelloy BHBHastelloy B/HFHBSTitaniumTHastelloy B/FHFHBFHastelloy CHCHastelloy C/HFHCSHastelloy C/FHFHCFIncoloy 800/HFIIncoloy 800/FHFIFIncoloy 825/HFNIncoloy 825/FHFNFTitanium/HFTTitanium/FHFTFA 105, Trim F6/HF (API Trim #8)A 105, Trim F6/FHF (API Trim #5)A 105, Trim F316/HF (API Trim #12)A 105, Trim F316/FHFA 105, Trim Monel 500 (API Trim #9)A 105, Trim Monel 500/HF (API Trim #11)A 105, Trim Monel 500/FHFF22, Trim F6/HF (API Trim #8)F22, Trim F6/FHF (API Trim #5)F5, Trim F6/HF (API Trim #8)F5, Trim F6/FHF (API Trim #5)F304, Trim F304/HFF304, Trim F304/FHFF304L, Trim F304/HFF304L, Trim F304/FHFF304H, Trim F304/HFF304H, Trim F304/FHFF316, Trim F316/HF (API Trim #12)F316, Trim F316/FHFF316L, Trim F316/HF (API Trim #12)F316L, Trim F316/FHFF316H, Trim F316/HF (API Trim #12)F316H, Trim F316/FHFF11, Trim F6/HF (API Trim #8)F11, Trim F6/FHF (API Trim #5)F9, Trim F6/HF (API Trim #8)F9, Trim F6/FHF (API Trim #5)LF2, Trim F6/HF (API Trim #8)LF2, Trim F6/FHF (API Trim #5)LF2, Trim F316/HF (API Trim #12)LF2, Trim F316/FHFOther, to be specifiedSection D - End ConfigurationTSWSW/TT/SWBWPRFRTJFFSFN ThreadedSocket WeldSocket Weld Inlet x Threaded OutletThreaded Inlet x Socket Weld OutletButt WeldPlain EndFlanged, Raised FaceFlanged, Ring Type JointFlat Face FinishSmooth Face FinishNipples, Customer SpecifySection E - Special RequirementsASME Section INACEOxygen ServiceHydrogen ServicePMISpecial Packing/GasketsOther – Customer SpecifyEXAMPLES:1” Conventional Port, 800#, Bolted Bonnet, Gate, A 105, Alloy 20/FHF Trim, Threaded EndsFig. No. 1” HL-11A2F-T3/4” Conventional Port, 1500#, Welded Bonnet, Globe, F5, F316/HF Trim, Socket Weld EndsFig. No. 3/4” 9WL-363-SW4
ALLOY & STAINLESS FORGED STEEL VALVESBONNEY FORGEGATE VALVECLASS 800 – Bolted Bonnet – Bolted Gland – O.S.&Y.Threaded or Socket Weld EndsBODY & TRIM MATL.FULLPORTCONV.PORTF11 - 13% Chr. (1)SIZEVALVETYPE NO.1/4 - 3/81/23/411 1/41 1/22HL-19POA 334 392 480POA 837 1,158F5 - 13% Chr. (1)HL-16POA392462562POA1,0451,323F316L - 18/8 (1)HL-18L 572572677990POA1,5402,069F9 - 13% Chr. (1)HL-1AF11 - 13% Chr. (1)H-19F5 - 13% Chr. (1)H-16F316L - 18/8 (1)H-18LPRICE ON APPLICATIONGLOBE VALVECLASS 800 – Bolted Bonnet – Bolted Gland – O.S.&Y.Threaded or Socket Weld EndsFULLPORTCONV.PORTBODY & TRIM MATL.F11 - 13% Chr. (1)SIZEVALVETYPE NO.1/4 - 3/81/23/411 1/41 1/22HL-39POA 525 646 762POA 1,577 2,297F5 - 13% Chr. (1)HL-36POA6547201,153POA2,0272,746F316L - 18/8 (1)HL-38L 7377378061,268POA2,2012,969F11 - 13% Chr. (1)H-39F5 - 13% Chr. (1)H-36F316L - 18/8 (1)H-38LPRICE ON APPLICATIONPISTON CHECK VALVECLASS 800 – Bolted CapThreaded or Socket Weld EndsFULLPORTCONV.PORTBODY & TRIM MATL.VALVETYPE NO.F11 - 13% Chr. (1)HL-49F5 - 13% Chr. (1)HL-46F316L - 18/8 (1)HL-48LF11 - 13% Chr. (1)SIZE1/4 - 3/81/23/411 1/41 1/22 2,989 4,052PRICE ON APPLICATION– 941 1,100 1,513–H-49F5 - 13% Chr. (1)H-46F316L - 18/8 (1)H-48LPRICE ON APPLICATIONBALL CHECK VALVECLASS 800 – Bolted CapThreaded or Socket Weld EndsFULLPORTCONV.PORTBODY & TRIM MATL.F11 - 13% Chr. (1)VALVETYPE NO.1/23/411 1/4HL-59F5 - 13% Chr. (1)HL-56F316L - 18/8 (1)HL-58LF11 - 13% Chr. (1)SIZE1/4 - 3/8PRICE ON APPLICATIONH-59F5 - 13% Chr. (1)H-56F316L - 18/8 (1)H-58L(1) Hard Faced Seats (1/2 Stellite)51 1/22
ALLOY & STAINLESS FORGED STEEL VALVES BONNEY FORGESWING CHECKCLASS 800 – Bolted Bonnet – Horiz. & Vert. InstallationThreaded or Socket Weld EndsSWINGBODY & TRIM MATL.VALVETYPE NO.F11 - 13% Chr. (1)HL-69F5 - 13% Chr. (1)HL-66F304 - 18/8 (1)HL-67F316L - 18/8 (1)HL-68LSIZE1/4 - 3/81/23/411 1/41 1/22PRICE ON APPLICATIONGATE & GLOBE VALVECLASS 1500 – Bolted Bonnet – Bolted Gland – O.S.&Y.Threaded or Socket Weld Ends – Conventional PortGLOBEGATEBODY & TRIM MATL.VALVETYPE NO.F11 - 13% Chr. (1)9HL-19F5 - 13% Chr. (1)9HL-16F304 - 18/8 (1)9HL-17F316L - 18/8 (1)9HL-18LF22 - 13% Chr. (1)9HL-15F11 - 13% Chr. (1)9HL-39F5 - 13% Chr. (1)9HL-36F304 - 18/8 (1)9HL-37F316L - 18/8 (1)9HL-38LF22 - 13% Chr. (1)9HL-35GATE VALVESIZE1/4 - 3/81/23/411 1/41 1/22PRICE ON APPLICATIONCLASS 2500 – Seal Welded Bonnet – Bolted Gland – O.S.&Y.Threaded or Socket Weld EndsFULLPORTBODY & TRIM MATL.VALVETYPE NO.F11 - 13% Chr. (2)25W-19F5 - 13% Chr. (1)25W-16F304 - 18/8 (1)25W-17F316L - 18/8 (1)25W-18LF22 - 13% Chr. (2)SIZE1/4 - 3/81/23/411 1/41 1/22PRICE ON APPLICATION25W-15GLOBE VALVECLASS 2500 – Seal Welded Bonnet – Bolted Gland – O.S.&Y.Threaded or Socket Weld EndsFULLPORTBODY & TRIM MATL.VALVETYPE NO.F11 - 13% Chr. (2)25W-39F5 - 13% Chr. (1)25W-36F304 - 18/8 (1)25W-37F316L - 18/8 (1)25W-38LF22 - 13% Chr. (2)SIZE1/4 - 3/81/23/411 1/4PRICE ON APPLICATION25W-35(1) Hard Faced Seats (1/2 Stellite)(2) Hard Faced Seats and Disc (FHF)61 1/22
ALLOY & STAINLESS FORGED STEEL VALVESBONNEY FORGEGATE VALVECLASS 800 – Seal Welded Bonnet – Bolted Gland – O.S.&Y.CONV.PORTVALVOLET Female End – Threaded or Socket WeldMale End – Extended WELDOLET or Lip EndBODY & TRIM MATL.VALVETYPE NO.F11 - 13% Chr. (1)VOLL-19F5 - 13% Chr. (1)VOLL-16F316L - 18/8 (1)VOLL-18LF9 - 13% Chr. (1)VOLL-1ASIZE1/4 - 3/81/23/411 1/41 1/22PRICE ON APPLICATIONGATE VALVECLASS 800 – Seal Welded Bonnet – Bolted Gland – O.S.&Y.Extended BodyThreaded or Socket Weld Ends: Male Thread x Female ThreadMale Plain x Female ThreadMale Thread x Female SWMale Plain x Female SWCONV.PORTBODY & TRIM MATL.F11 - 13% Chr. (1)VALVETYPE NO.SIZE1/4 - 3/81/23/411 1/41 1/22MFL-19F5 - 13% Chr. (1)MFL-16F316L - 18/8 (1)MFL-18LGLOBE VALVEPRICE ON APPLICATIONCLASS 1690 – Seal Welded Bonnet – Bolted Gland – “Y” PatternThreaded or Socket Weld EndsBODY & TRIM MATL.VALVETYPE NO.F11 - 13% Chr. (2)1690Y-39F22 - 13% Chr. (2)1690Y-35GLOBE VALVESIZE1/4 - 3/81/23/411 1/41 1/22PRICE ON APPLICATIONCLASS 2680 – Seal Welded Bonnet – Bolted Gland – “Y” PatternThreaded or Socket Weld EndsBODY & TRIM MATL.VALVETYPE NO.F11 - 13% Chr. (2)2680Y-39F22 - 13% Chr. (2)2680Y-35SIZE1/4 - 3/81/23/411 1/4PRICE ON APPLICATION(1) Hard Faced Seats (1/2 Stellite)(2) Hard Faced Seats and Disc (FHF)71 1/22
ALLOY & STAINLESS FORGED STEEL VALVES BONNEY FORGEGATE VALVECLASS 150–300–600–1500 – Integral Flanged EndsConventional Port3001500FULL PORT600CONVENTIONAL PORT150BODY & TRIM MATL.Bolted Bonnet – Bolted Gland – O.S.&Y.VALVETYPE NO.F11 - 13% Chr. (1)L1-19F5 - 13% Chr. (1)L1-16F304 - 18/8 (1)L1-17F316L - 18/8 (1)L1-18LF11 - 13% Chr. (1)L3-19F5 - 13% Chr. (1)L3-16F304 - 18/8 (1)L3-17F316L - 18/8 (1)L3-18LF11 - 13% Chr. (1)L6-19F5 - 13% Chr. (1)L6-16F304 - 18/8 (1)L6-17F316L - 18/8 (1)L6-18LF11 - 13% Chr. (1)15F-19F5 - 13% Chr. (1)15F-16F304 - 18/8 (1)15F-17F316L - 18/8 (1)15F-18LSIZE1/4 - 3/81/23/41503001500600CONVENTIONAL PORT1 1/22CLASS 150–300–600–1500 – Integral Flanged EndsConventional PortFULL PORT1 1/4PRICE ON APPLICATIONGLOBE VALVEBODY & TRIM MATL.1Bolted Bonnet – Bolted Gland – O.S.&Y.VALVETYPE NO.F11 - 13% Chr. (1)L1-39F5 - 13% Chr. (1)L1-36F304 - 18/8 (1)L1-37F316L - 18/8 (1)L1-38LF11 - 13% Chr. (1)L3-39F5 - 13% Chr. (1)L3-36F304 - 18/8 (1)L3-37F316L - 18/8 (1)L3-38LF11 - 13% Chr. (1)L6-39F5 - 13% Chr. (1)L6-36F304 - 18/8 (1)L6-37F316L - 18/8 (1)L6-38LF11 - 13% Chr. (1)15F-39F5 - 13% Chr. (1)15F-36F304 - 18/8 (1)15F-37F316L - 18/8 (1)15F-38LSIZE1/4 - 3/81/23/411 1/4PRICE ON APPLICATION(1) Hard Faced Seats (1/2 Stellite)81 1/22
CARBON FORGED STEEL VALVESBONNEY FORGEGATE VALVECLASS 800 – Bolted Bonnet – Bolted Gland – O.S.&Y.Threaded or Socket Weld Ends1/4 - 3/81/23/411 1/41 1/22A105 - 13% Chr. (1)HL-11 85 85 93 113 214 214 278A105 - 18/8 (1)HL-13POA264311381POA637865CONV.PORTBODY & TRIM MATL.FULLPORTSIZEVALVETYPE NO.HL-14S (1)POA350418521POA9161,353A105 - 13% Chr. (1)A105 - MonelH-11POA144196346432432710A105 - 18/8 (1)H-13A105 - Monel**PRICE ON APPLICATIONH-14S (1)GLOBE VALVECLASS 800 – Bolted Bonnet – Bolted Gland – O.S.&Y.Threaded or Socket Weld EndsFULLPORTCONV.PORTBODY & TRIM MATL.A105 - 13% Chr. (1)A105 - 18/8 (1)A105 - Monel (1)1/4 - 3/81/23/411 1/41 1/22HL-31 131 131 150 196 383 383 491HL-33POA572668820POA1,5942,019*HL-34S (1)A105 - 13% Chr. (1)H-31A105 - 18/8 (1)H-33A105 - Monel (1)SIZEVALVETYPE NO.PRICE ON APPLICATIONH-34S (1)PISTON CHECK VALVECLASS 800 – Bolted Cap – Horizontal InstallationThreaded or Socket Weld Ends1/4 - 3/81/23/411 1/41 1/22A105 - 13% Chr. (1)HL-41 122 122 131 154 302 302 423A105 - 18/8 (1)HL-43POA331399463POA8201,219CONV.PORTBODY & TRIM MATL.FULLPORTSIZEVALVETYPE NO.A105 - Monel (1)HL-44S (1)A105 - 13% Chr. (1)H-41A105 - 18/8 (1)H-43A105 - Monel (1)*PRICE ON APPLICATIONH-44S (1)BALL CHECK VALVECLASS 800 – Bolted Cap – Horizontal InstallationThreaded or Socket Weld Ends1/4 - 3/81/23/411 1/41 1/22A105 - 13% Chr. (1)HL-51 154 154 171 184POA 340 473A105 - 18/8 (1)HL-53POA331399463POA8201,219CONV.PORTBODY & TRIM MATL.FULLPORTSIZEVALVETYPE NO.A105 - Monel (1)HL-54S (1)A105 - 13% Chr. (1)H-51A105 - 18/8 (1)H-53F5 - Monel (1)H-54S (1)PRICE ON APPLICATION(1) Hard Faced Seats (1/2 Stellite)* Commodity Valves9*
CARBON FORGED STEEL VALVESBONNEY FORGESWING CHECKCLASS 800 – Bolted Bonnet – Horiz. & Vert. InstallationThreaded or Socket Weld EndsFULLPORTCONV.PORTBODY & TRIM MATL.A105 - 13% Chr. (1)A105 - 18/8 (1)A105 - Monel1/4 - 3/81/23/411 1/41 1/22HL-61– 257 312 503POA 810 960HL-63–7759591,254POA2,3702,786HL-64S (1)A105 - 13% Chr. (1)H-61A105 - 18/8 (1)H-63A105 - MonelSIZEVALVETYPE NO.PRICE ON APPLICATIONH-64S (1)GATE VALVECLASS 800 – Seal Welded Bonnet – Bolted Gland – O.S.&Y.Threaded or Socket Weld Ends1/4 - 3/81/23/411 1/41 1/22A105 - 13% Chr. (1)WL-11 85 85 93 120 220 220 274A105 - 18/8 (1)WL-13CONV.PORTBODY & TRIM MATL.FULLPORTSIZEVALVETYPE NO.A105 - MonelWL-14S (1)A105 - 13% Chr. (1)W-11A105 - 18/8 (1)W-13A105 - Monel*PRICE ON APPLICATIONW-14S (1)GLOBE VALVECLASS 800 – Seal Welded Bonnet – Bolted Gland – O.S.&Y.Threaded or Socket Weld Ends1/4 - 3/81/23/411 1/41 1/22A105 - 13% Chr. (1)WL-31POA 136 158 204POA 444 573A105 - 18/8 (1)WL-33CONV.PORTBODY & TRIM MATL.FULLPORTSIZEVALVETYPE NO.A105 - Monel (1)WL-34S (1)A105 - 13% Chr. (1)W-31A105 - 18/8 (1)W-33A105 - Monel (1)PRICE ON APPLICATIONW-34S (1)PISTON CHECK VALVECLASS 800 – Seal Welded Bonnet – Horizontal InstallationThreaded or Socket Weld EndsFULLPORTCONV.PORTBODY & TRIM MATL.A105 - 13% Chr. (1)A105 - 18/8 (1)A105 - Monel (1)A105 - 13% Chr. (1)A105 - 18/8 (1)A105 - Monel (1)VALVETYPE NO.SIZE1/4 - 3/81/23/411 1/4WL-41WL-43WL-44S (1)PRICE ON APPLICATIONW-41W-43W-44S (1)(1) Hard Faced Seats (1/2 Stellite)* Commodity Valves101 1/22*
CARBON FORGED STEEL VALVES BONNEY FORGEBALL CHECK VALVECLASS 800 – Seal Welded Bonnet – Horizontal InstallationThreaded or Socket Weld EndsFULLPORTCONV.PORTBODY & TRIM MATL.A105 - 13% Chr. (1)A105 - 18/8 (1)A105 - Monel (1)A105 - 13% Chr. (1)A105 - 18/8 (1)A105 - Monel (1)VALVETYPE NO.SIZE1/4 - 3/81/23/411 1/41 1/22WL-51WL-53WL-54S (1)PRICE ON APPLICATIONW-51W-53W-54S (1)GLOBE VALVECLASS 800 – Seal Welded Bonnet – Bolted Gland – “Y” PatternThreaded or Socket Weld EndsFULLPORTBODY & TRIM MATL.A105 - 13% Chr. (2)A105 - 18/8 (1)A105 - Monel (1)VALVETYPE NO.SIZE1/4 - 3/81/23/411 1/41 1/22Y-32PRICE ON APPLICATIONY-33Y-34S (1)PISTON CHECK VALVECLASS 800 – Seal Welded Bonnet – “Y” PatternThreaded or Socket Weld EndsFULLPORTBODY & TRIM MATL.A105 - 13% Chr. (2)A105 - 18/8 (1)A105 - Monel (1)VALVETYPE NO.SIZE1/4 - 3/81/23/411 1/41 1/22Y-42PRICE ON APPLICATIONY-43Y-44S (1)GATE & GLOBE VALVECLASS 1500 – Bolted Bonnet – Bolted Gland – O.S.&Y.Threaded or Socket Weld EndsCONVENTIONALPORTGLOBEGATEBODY & TRIM MATL.A105 - 13% Chr. (1)A105 - 18/8 (1)A105 - MonelVALVETYPE NO.1/4 - 3/81/23/411 1/41 1/229HL-11POA 482 530 627POA 1,012 1,3861,0191,3939HL-13PRICE ON APPLICATION9HL-14S (1)A105 - 13% Chr. (1)9HL-32A105 - 18/8 (1)9HL-33A105 - Monel (1)SIZEPOA533587684POAPRICE ON APPLICATION9HL-34S (1)(1) Hard Faced Seats (1/2 Stellite)(2) Hard Faced Seats and Disc (FHF)11
CARBON FORGED STEEL VALVESBONNEY FORGEPISTON – BALL & SWING CHECK VALVECLASS 1500 – Bolted CAPThreaded or Socket Weld EndsPISTONBALLA105 - 13% Chr. (1)A105 - 18/8 (1)A105 - Monel (1)A105 - 13% Chr. (1)A105 - 18/8 (1)A105 - Monel (1)SWINGCONVENTIONALPORTBODY & TRIM MATL.A105 - 13% Chr. (1)A105 - 18/8 (1)A105 - MonelSIZEVALVETYPE NO.1/4 - 3/81/23/411 1/41 1/229HL-41POA 477 519 697POA 991 1,3569HL-439HL-44S (1)9HL-519HL-53PRICE ON APPLICATION9HL-54S (1)9HL-619HL-639HL-64SGATE VALVECLASS 2500 – Seal Welded Bonnet – Bolted Gland – O.S.&Y.Threaded or Socket Weld EndsFULLPORTBODY & TRIM MATL.A105 - 13% Chr. (2)A105 - 18/8 (1)A105 - MonelVALVETYPE NO.SIZE1/4 - 3/81/23/411 1/41 1/2225W-12PRICE ON APPLICATION25W-1325W-14S (1)GLOBE VALVECLASS 2500 – Seal Welded Bonnet – Bolted Gland – O.S.&Y.Th
GATE VALVE Class 800 – Bolted Bonnet or Seal Welded Bonnet Bolted Gland - O.S.&Y. VALVOLET Female End - Threaded or Socket Weld Male End - Extended WELDOLET or Lip End Extended Body - Welded Bonnet - O.S.&Y. Extended Bonnet - Bolted Gland - O.S.&Y. Cryogenic Service or Bellows Seale
The differences in ISO 9001:2008 vs. ISO 9001:2000 are described below. Deleted ISO 9001:2000 text is indicated by strikethroughs. New ISO 9001:2008 text is highlighted and underlined. The underlining will allow readers to distinguish the new text, even if this paper is printed without color.
ISO 9001:2015 QMS and ISO 14001:2015 EMS and ISO 45001:2018 Internal audit 6. Principals of Quality Management System-ISO 9001:2015 7. ISO 9001 and 14001 and ISO 45001:2018 EQHSMS audit records 8. Table of Documented information Summary against ISO 9001:2015 and ISO 14001:2015 require
ISO 9001.2015 & ISO 14001.2015 Gap Analysis Checklists* ISO 9001.2015 & ISO 14001.2015 Internal Audit Checklists* ISO 9001 & ISO 14001 Employee Newsletters *Sample Included. ISO 9001:2015 QUALITY MANAGEMENT SYSTEM ***** ISO 14001:2015 ENVIRONMENTAL MANAGEMENT SYSTEM ***** QMS - EMS MANUAL Your Company Name
of just inspecting the final product). The new ISO 9001:2008 was published on 15 November 2008. ISO 9001:2008 uses the same numbering system as ISO 9001:2000 to organize the standard. As a result, the new ISO 9001:2008 standard looks very much like the 9001:2000. No new requirements have been added. However, some important clarifications and
ISO 9001:2015 vs ISO 9001:2008 Description: This document is provided by American System Registrar. It shows relevant clauses, side-by-side, of ISO 9001:2008 standard and the ISO 9001:2015 standard. Purpose / Usage: The purpose of the document is to highlight the changes between the new and old standard. Use this document to better understand
ISO 9001 requirements 2. A mapping between Quality Management System (QMS) requirements in ISO 9001:2008 and ISO 9001:2015 where the requirement is essentially the same 3. "Documented Information" has been adopted. Consequently, the The reverse mapping Table 1 will help if you are considering a transition project from ISO 9001:2008 to the .
Final Draft International Standard (FDIS) of ISO 9001 and vice versa. This guide provides the following: 1. An overview of the changes, deletions, new or enhanced ISO 9001 requirements 2. A mapping between Quality Management System (QMS) requirements in ISO 9001:2008 and ISO FDIS 9001:2015 where the requirement is essentially the same 3.
ISO 9001 requirements 2. A mapping between Quality Management System (QMS) requirements in ISO 9001:2008 and ISO 9001:2015 where the requirement is essentially the same 3. "Documented Information" has been adopted. Consequently, the The reverse mapping Table 1 will help if you are considering a transition project from ISO 9001:2008 to the .
