Section 400 Plow Parts - Norwest

2y ago
9 Views
2 Downloads
3.77 MB
24 Pages
Last View : 17d ago
Last Download : 2m ago
Upload by : Maleah Dent
Transcription

Section 400Plow PartsMOLDBOARD SHINSLW PLOW SHARESSWITCH SHARESLANDSIDESTRASHBOARDSDEEP SUCK SHARESRIB PLOW SHARESwww.norwest-mfg.comMOLDBOARDS

NORWEST PLOWSHARES*RSO185LPPLOW SHARESRIB PLOW SHARES:The Rib Share is made from a section with a “rib” running horizontally through the share for extra strength andwear. Rib shares are not available for all plow models. The Rib Share is oil-quenched and heat-treated.Hardfacing is not recommended for Rib Shares. Bolts and nuts not included.LW PLOW SHARES:The LW Long Wear Share is a heavy duty share produced from a full 3/8” section. The long wear share is upsetforged at the nose for long, break resistant wear. The LW Share is oil quenched and heat-treated.LW PLOW SHARES HARDFACED: The LW Hardfaced Share is produced from boron steel with a 1/4” chromiumcarbide point and chromium carbide application on the cutting edge of the share. These are excellent for highabrasion soil conditions. Left Hand and Short Cut Shares available in most makes. Bolts and nuts are included.**Note; Left hand bolts and nuts packed with IHC, DMI, Oliver/White, Wil-Rich and Melroe.Plow Parts 400-2www.norwest-mfg.com

PLOW SHARESfor CASE/IHNORWESTPART #*LWI184RPNuts & Bolts NOT Included(Rib Shares)DESCRIPTIONSIZEOEM ## OF BOLT HOLES& HOLE SIZESCTN. WEIGHT(Approx. LBS)(1) 1/2”47 LBSper CTN/6MODELS: SUPER CHIEF BOTTOMS16” Rib SharesRSI164LPRSI164RPLeft Hand; Plain16” Rib ShareRight Hand; Plain16” Rib Share3/8” x 16”4632231980954(3) 7/16”18” Rib SharesRSI184LHLeft Hand; Hardfaced18” Rib ShareRSI184RHRight Hand; Hardfaced18” Rib ShareRSI184LPLeft Hand; Plain18” Rib ShareRSI184RPRight Hand; Plain18” Rib Sharefor CASE/IH(1) 1/2”3/8” x 18” - 20”4632381980956(3) 7/16”3/8” x 18” - 20”4632381980956(3) 7/16”(1) 1/2”52 LBSper CTN/652 LBSper CTN/6Nuts & Bolts INCLUDED(LW Shares)MODELS: SUPER CHIEF16” LONG WEAR SHARESLWI164LPLeft Hand; Plain16” Rock Share3/8” x 16”LWI164RPRight Hand; Plain16” Rock Share46323R463241R(1) 1/2”(3) 7/16”47 LBSper CTN/6MODELS: SUPER CHIEF18” LONG WEAR SHARESLWI184LHLeft Hand; Hardfaced18” Rock ShareLWI184RHRight Hand; Hardfaced18” Rock ShareLWI184LPLeft Hand; Plain18” Rock ShareLWI184RP3/8” x 18”463251R463238R3/8” x 18”463251R463238R46323RRight Hand; Plain18” Rock ShareRSI164RP &LWI164RPwww.norwest-mfg.com(1) 1/2”(3) 7/16”(1) 1/2”(3) 7/16”47 LBSper CTN/652 LBSper CTN/6RSI184RP &LWI184RPPlow Parts 400-3

PLOW SHARES*LWO185LPfor OLIVER &MINNEAPOLIS-MOLINE:Nuts & Bolts INCLUDED(LW Shares) USE OLIVER/WHITE & WATTSNORWESTPART #DESCRIPTIONLWO185LHLeft Hand; Hardfaced18” Rock Share LWLWO185RHRight Hand; Hardfaced18” Rock Share LWLWO185LPLeft Hand; Plain18” Rock Share LWLWO185RPforSIZEOEM #3/8” x 18”SBP219629BF3/8” x 18”SBP219629BFRight Hand; PlainDESCRIPTIONCTN. WEIGHT(Approx. LBS)(1) 1/2”47 LBSper CTN/6(4) 7/16”(1) 1/2”(4) 7/16”47 LBSper CTN/6Nuts & Bolts INCLUDED(LW Shares)NORWESTPART ## OF BOLT HOLES& HOLE SIZESSIZEOEM ## OF BOLT HOLES& HOLE SIZESCTN. WEIGHT(Approx. LBS)MODELS: GENERAL PURPOSE AND HEAVY DUTY SERIESLWFD185LPLeft Hand; PlainLWFD185RPRight Hand; Plain18” Rock Share LW3/8” x 18”7101980LWFD185RPLWO185RPPlow Parts 400-4(5) 7/16”www.norwest-mfg.com54 LBSper CTN/6

PLOW SHARESfor JOHN DEERE*RSJD185RHNuts & Bolts NOT Included(Rib Shares)NORWESTPART #DESCRIPTIONRSJD185LHLeft Hand; Hardfaced18” Rib ShareSIZE# OF BOLT HOLES& HOLE SIZESOEM #CTN. WEIGHT(Approx. LBS)MODELS: HS 350, 356,400, SDT & NU BOTTOMSRSJD185RHRight Hand; Hardfaced18” Rib ShareRSJD185LPLeft Hand; Plain18” Rib ShareRSJD185RPRight Hand; Plain18” Rib ShareRSJDM183LHLeft Hand; Hardfaced18” Rib Share3/8” x 18”- 20”A142433/8” x 18” - 20”A14243(1) 1/2”(4) 7/16”(1) 1/2”52 LBSper CTN/6(4) 7/16”52 LBSper CTN/6MODELS: METRIC NU-450 BOTTOMSRSJDM183RHRight Hand; HardfacedRSJDM183LPLeft Hand; PlainRSJDM183RPRight Hand; Plain18” Rib Sharefor JOHN DEERE3/8” x 18”A42808A30951(3) 16mm52 LBSper CTN/63/8” x 18”A42808A30951(3) 16mm52 LBSper CTN/6Nuts & Bolts NOT Included(LW Shares)MODELS: NU1036-1046 AND NU1048LWJ185LHLeft Hand; Hardfaced18” Rock ShareLWJ185RHRight Hand; Hardfaced18” Rock ShareLWJ185LPLeft Hand; Plain18” Rock ShareLWJ185RPRight Hand; Plain18” Rock Share3/8” x 18”A14243(3) 7/16”52 LBSper CTN/63/8” x 18”A14243(3) 7/16”52 LBSper CTN/6(3) 16mm57 LBSper CTN/6(3) 16mm57 LBSper CTN/6(3) 16mm57 LBSper CTN/6(3) 16mm57 LBSper CTN/6MODELS: METRIC NU BOTTOMS; NU400-NU450LJDM183LH18” Left Hand Metric LWPlow Share; HardfacedLJDM183RH18” Right Hand Metric LWPlow Share; HardfacedLJDM183LP18” Left Hand Metric LWPlow Share; PlainLJDM183RP18” Right Hand Metric LWPlow Share; Plain450mm3/8” x 18”450mm3/8” x 18”A30951, A32217,A32221, A32222,A40407, A40408,A42806, A42807,A42808RSJD185RP &LWJ185RPwww.norwest-mfg.comRSJDM183RP &LJDM183RPPlow Parts 400-5

PLOW SHARES*RSMF164LPfor MASSEY FERGUSONNORWESTPART #Nuts & Bolts NOT Included(Rib Shares)DESCRIPTIONSIZEOEM ## OF BOLT HOLES& HOLE SIZESCTN. WEIGHT(Approx. LBS)16” Rib SharesRSMF164LHLeft Hand; Hardfaced16” Rib ShareRSMF164RHRight Hand; Hardfaced16” Rib ShareRSMF164LPLeft Hand; Plain16” Rib ShareRSMF164RPRight Hand; Plain16” Rib ShareRSMF184LPLeft Hand; Plain18” Rib ShareRSMF184RPRight Hand; Plain18” Rib Share3/8” x 16”475716M1(4) 1/2”47 LBSper CTN/63/8” x 16”475716M1(4) 1/2”47 LBSper CTN/6(4) 1/2”52 LBSper CTN/63/8” 18” Rib Shares 18” - 20”3/8” x 18”for MASSEY FERGUSON475823M1Nuts & Bolts INCLUDED(LW Shares)MODELS: N BOTTOM16” Rock SharesLWMF164LPLeft Hand; Plain16” Rock Share LWLWMF164RPRight Hand; Plain16” Rock Share LW3/8” x 16”475716M1(4) 1/2”47 LBSper CTN/6(4) 1/2”52 LBSper CTN/618” Rock SharesLWMF184LPLeft Hand; Plain3/8” x 18”LWMF184RPRight Hand; PlainRSMF164RP & LWMF164RPPlow Parts 400-6475823M1RSMF184RP & LWMF184RPwww.norwest-mfg.com

PLOW SHARES*LWM164RPfor MELROENORWESTPART #Nuts & Bolts INCLUDED(LW Shares)DESCRIPTIONSIZEOEM ## OF BOLTHOLES & HOLESIZESCTN. WEIGHT(Approx. LBS)MODELS: OLIVER STYLE BOTTOMS16” Rock SharesLWM164LPLeft Hand; Plain16” Rock Share LW3/8” x 16”—(4) 7/16”47 LBSper CTN/6LWM164RPRight Hand; Plain16” Rock Share LW3/8” x 16”6526832(4) 7/16”47 LBSper CTN/6LWM184LPLeft Hand; Plain18” Rock Share LW3/8” x 18”—(4) 7/16”52 LBSper CTN/6LWM184RPRight Hand; Plain18” Rock Share LW3/8” x 18”6526829(4) 7/16”52 LBSper CTN/618” Rock Sharesfor OLIVER/WHITENORWESTPART #Nuts & Bolts NOT Included(Rib Shares)DESCRIPTIONSIZEOEM ## OF BOLT HOLES& HOLE SIZESCTN. WEIGHT(Approx. LBS)(1) 1/2”52LBSper CTN/618” Rib SharesRSO185LHLeft Hand; Hardfaced18” Rib ShareRSO185RHRight Hand; Hardfaced18” Rib ShareRSO185LPLeft Hand; Plain18” Rib ShareRSO185RPRight Hand; Plain18” Rib Share3/8” x 18”220024BS3/8” x 18”220024BSLWM164RP & LWM184RPwww.norwest-mfg.com(4) 7/16”(1) 1/2”(4) 7/16”52LBSper CTN/6RSO185RPPlow Parts 400-7

PLOW SHARES*RSW184LPforNuts & Bolts NOT Included(Rib Shares)NORWESTPART #DESCRIPTIONSIZEOEM ## OF BOLT HOLES& HOLE SIZESCTN. WEIGHT(Approx. LBS)18” Rib SharesRSW184LHLeft Hand; Hardfaced18” Rib ShareRSW184RHRight Hand; Hardfaced18” Rib ShareRSW184LPLeft Hand; Plain18” Rib ShareRSW184RPRight Hand; Plain18” Rib Sharefor3/8” x 18”14255(4) 1/2”52LBSper CTN/63/8” x 18”14255(4) 1/2”52LBSper CTN/6Nuts & Bolts INCLUDED(LW Shares)MODELS: DEEP-TILL BOTTOMLWR184LPLeft Hand: Plain18” Rock Share LWLWR184RPRight Hand; Plain18” Rock Share LW3/8” x 18”20033(4) 1/2”52LBSper CTN/6RSW184RP & LWR184RPCHECK OUT OUR WEBSITE! Learn about Norwest ManufacturingView our Online CatalogView our Special Promotions Print an Updated Catalogwww.norwest-mfg.comPlow Parts 400-8www.norwest-mfg.com

DEEP SUCK SHARES*LIH184RPDEEP SUCK SHARES:Deep Suck Shares are manufactured using high-carbon, heat-treated steel. The special design includes a longnose for superior penetration and suction. The deep suck plow share is ideal for use on tougher soils where it isdifficult to keep the plow in the ground or when deeper penetration is desired. Available Hardfaced or Left Handupon request. Sold without fasteners.for CASE/IHNORWESTPART #DESCRIPTIONLIH164LH16” Left Hand Deep SuckPlow Share; HardfacedLIH164RH16” Right Hand Deep SuckPlow Share; HardfacedLIH164LP16” Left Hand Deep SuckPlow Share; PlainLIH164RP16” Right Hand Deep SuckPlow Share; PlainLIH184LH18” Left Hand Deep SuckPlow Share; HardfacedNuts & Bolts NOT includedSIZEOEM ## OF BOLT HOLES WEIGHT EACH& HOLE SIZES(Approx. LBS)16” DEEP SUCK SHARES3/8” x 4-1/8” x 16”46323R(1) 1/2” (3) 7/16”7.83 LBS3/8” x 4-1/8” x 16”46323R(1) 1/2” (3) 7/16”7.83 LBS18” DEEP SUCK SHARESLIH184RH18” Right Hand Deep SuckPlow Share; HardfacedLIH184LP18” Left Hand Deep SuckPlow Share; PlainLIH184RP18” Right Hand Deep SuckPlow Share; Plain3/8” x 4-1/8” x 18”463251R463238R436254(1) 1/2” (3) 7/16”9.2 LBS3/8” x 4-1/8” x 18”463251R463238R463254(1) 1/2” (3) 7/16”9.2 LBSLIH184RPwww.norwest-mfg.comPlow Parts 400-9

MOLDBOARD SHINS*WO-9MOLDBOARD SHINS:Moldboard Shins are made of 5/16” high carbon steel, oil-quenched and heat-treated. Nuts and bolts included.for CASE/IHNORWESTPART #Nuts & Bolts INCLUDEDDESCRIPTIONSIZEOEM ## OF BOLT HOLES& HOLE SIZESCTN. WEIGHT(Approx. LBS)MODELS: NEW 18”, T-89974WO-9Right Hand Shin5/16” x 18”T-57747(2) 7/16”21.5 LBSper CTN/6WO-9-LLeft Hand Shin5/16” x 18”—(2) 7/16”21.5 LBSper CTN/6MODELS: SUPER CHIEFWI-25Right Hand Shin5/16” x 14”, 16”, 18”or 20”522325R132001C1488266R(2) 7/16”24 LBSper CTN/6WI-25-LLeft Hand Shin5/16” x 14”, 16”, 18”or 20”55075C4645951284101C1(2) 7/16”24 LBSper CTN/6for DMINORWESTPART #Nuts & Bolts INCLUDEDDESCRIPTIONSIZEOEM ## OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)MODELS: HYDRA -WIDEWO-9Right Hand Shin5/16” x 16 & 18”33111602(2) 7/16”21 LBSper CTN/6WO-9-LLeft Hand Shin5/16” x 16 & 18”—(2) 7/16”21 LBSper CTN/6WI-25-LWO-9Plow Parts 400-10www.norwest-mfg.com

MOLDBOARD SHINS*WD-29-Lfor JOHN DEERENORWESTPART #Nuts & Bolts INCLUDEDDESCRIPTIONSIZE# OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)OEM #MODELS: NU1036, NU1046, NU1048WD-3Right Hand Shin5/16” x 16”-18”A15594(2) 7/16”26 LBSper CTN/6WD-3-LLeft Hand Shin5/16” x 16”-18”A15606(2) 7/16”26 LBSper CTN/6MODELS: HS314, 324, 354, 434, 444, 534, 544WD-514” Right Hand Shin5/16” x 14”A14700(2) 7/16”23 LBSper CTN/6WD-5-L14” Left Hand Shin5/16” x 14”A14701(2) 7/16”23 LBSper CTN/6MODELS: NU400-NU450 METRIC SERIESWD-29Right Hand Shin; Metric5/16” X 16” - 20”A30129(2) 7/16”28 LBSper CTN/6WD-29-LLeft Hand Shin; Metric5/16” X 16” - 20”—(2) 7/16”28 LBSper CTN/6for MASSEY FERGUSONNORWESTPART #DESCRIPTIONNuts & Bolts INCLUDEDSIZEOEM ## OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)MODELS: “N” BOTTOM & “N” HEAVY DUTYWMFSRight Hand Shin5/16” x 14”, 16” or 18”660008M1660020M1(2) 7/16”21 LBSper CTN/6WMFSLLeft Hand Shin5/16” x 14”, 16” or 18”661584(2) 7/16”21 LBSper CTN/6WD-3WD-5LWD-29WMFSLwww.norwest-mfg.comPlow Parts 400-11

MOLDBOARD SHINS*WO-7for MELROENORWESTPART #Nuts & Bolts INCLUDEDDESCRIPTIONSIZEOEM ## OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)MODELS: OLIVER STYLE BOTTOMSWO-9Right Hand Shin5/16” x 14”, 16” & 18”6522182P14617(2) 7/16”21 LBSper CTN/6WO-9-LLeft Hand Shin5/16” x 14”, 16” & 18”—(2) 7/16”21 LBSper CTN/6for OLIVER &NORWESTPART #MINNEAPOLIS MOLINE & WATTSDESCRIPTIONSIZEOEM #Nuts & Bolts INCLUDED# OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)MODELS: NL SERIES (Minneapolis Moline) & GENERAL PURPOSE (National David Brown)WO-9Right Hand Shin5/16” x 14”, 16”7490(2) 7/16”21.5 LBSper CTN/6WO-9-LLeft Hand Shin5/16” x 14”, 16”—(2) 7/16”21.5 LBSper CTN/6WO-9WO-9-LRemember when replacing one part on a plow, it may be necessary to loosenother parts to allow for wear.For example, when replacing the shin, it may be necessary to loosen the moldboard and the share to allow the new part to fit. Then simply tighten other partswhen proper alignment is achieved.Plow Parts 400-12www.norwest-mfg.com

MOLDBOARD SHINS*WO-8-Lfor OLIVER/WHITENORWESTPART #Nuts & Bolts INCLUDEDDESCRIPTIONSIZE# OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)OEM #MODELS: SPEEDEX 919 SERIESWO-7Right Hand Shin5/16” x 14”, 16” or 18”219279BS(2) 7/16”25.05 LBSper CTN/6WO-7-LLeft Hand Shin5/16” x 14”, 16” or 18”—(2) 7/16”25.05 LBSper CTN/6MODELS: 225 & 425-625WO-8Right Hand Shin5/16” x 12”, 14”, 16” or 18”EP7488C(2) 3/8”19 LBSper CTN/6WO-8-LLeft Hand Shin5/16” x 12”, 14”, 16” or 18”EP7488C218284(2) 3/8”19 LBSper CTN/6MODELS: 219, 419, 519, 619, 719WO-9Right Hand Shin5/16” x 12”, 14”, 16” or 18”EP7490C(2) 7/16”21.5 LBSper CTN/6WO-9-LLeft Hand Shin5/16” x 12”, 14”, 16” or 18”217404BS(2) 7/16”21.5 LBSper CTN/6forNORWESTPART #Nuts & Bolts INCLUDEDDESCRIPTIONSIZEOEM ## OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)MODELS: GENERAL PURPOSE & HEAVY DUTYWO-9Right Hand Shin5/16” x 16” or 18”213022A425722809(2) 7/16”21.5 LBSper CTN/6WO-9-LLeft Hand Shin5/16” x 16” or 18”—(2) 7/16”21.5 LBSper CTN/6MODELS: IH BOTTOMWI-25Right Hand Shin5/16” X 18”21572(2) 7/16”24 LBSper CTN/6WI-25-LLeft Hand Shin5/16” X 18”—(2) 7/16”24 LBSper CTN/6WO-7WO-8-LWO-9WI-25-Lwww.norwest-mfg.comPlow Parts 400-13

TRASHBOARDS*TBUVTRASHBOARDS:Trashboards are made of 5/16” thick steel, heat treated, and available in left or right hand. They are soldcomplete with bolts and nuts.for CASE/IHNORWESTPART #DESCRIPTIONNuts & Bolts INCLUDEDSIZEOEM ## OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)MODELS: SUPER CHIEFTBIHTrashboard5/16”—(2) 3/8”31.5 LBSper CTN/6TBIH-LTrashboard5/16”—(2) 3/8”31.5 LBSper CTN/6for JOHN DEERENuts & Bolts INCLUDEDNORWESTPART #DESCRIPTIONTBJDRight Hand Trashboard(Metric)5/16”—(2) 7/16”31 LBSper CTN/6TBJDLLeft Hand Trashboard(Metric)5/16”—(2) 7/16”32 LBSper CTN/6SIZEOEM ## OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)MODELS: HS356, 400, 500, & SDT; NU1036-1046 & NU1048; NU400-NU450 METRIC SERIESfor ALLIS CHALMERS, OLIVER/WHITENuts & Bolts INCLUDEDWill Also Fit: NEWER CASE, FORD, MELROE & WIL -RICHNORWESTPART #DESCRIPTIONSIZEOEM ## OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)MODELS: ALLIS CHALMERS: 387 SERIES (Dropped Front Hole); MELROE: OLIVER STYLE BOTTOMS, 987 SERIES;OLIVER/WHITE: 588 & 598 SERIES (Deep-till Bottom), 625, 425 & 225 SERIES; OLIVER: R419 & R619 SERIES;WIL-RICH: OLIVER STYLE BOTTOM & DEEP-TILL BOTTOM.TBUVRight Hand Trashboard5/16”—(2) 3/8”32 LBSper CTN/6TBUVLLeft Hand Trashboard5/16”—(2) 3/8”32 LBSper CTN/6*TBJDRight Hand Trashboard(Metric)5/16”*Fits John Deere& Wil-RichPlows(2) 7/16”31 LBSper CTN/6Norwest Part #Norwest Part #Norwest Part #TBIH/TBIH-LTBJD/TBJDLTBUV/TBUVL**Right Hand Trashboards Shown.Plow Parts 400-14www.norwest-mfg.com

LANDSIDES &W E A R PA D SLANDSIDES: DON’T SEE WHAT YOU NEED? WE CAN CUSTOM FABRICATE MOST LANDSIDES!Landsides are either drop forged or sheared, depending upon configuration. Landsides are made of high carbonsteel, oil-quenched and heat-treated. Sold complete with bolts and nuts.for CASE/IHNORWESTPART #DESCRIPTIONNuts & Bolts INCLUDEDSIZEOEM ## OF BOLT HOLES &HOLE SIZESCTN. WEIGHT(Approx. LBS)MODELS: SUPER CHIEF058UVRight Hand LandsideWear Plate1/2”59058(2) 7/16”22 LBSper CTN/6058UVLLeft Hand LandsideWear Plate1/2”59058(2) 7/16”22 LBSper CTN/6MODELS: ALL BOTTOMS59057Right Hand InnerLandside Plate1/2”590571980672C(1) 7/16” (2) 1/2”45 LBSper CTN/659057LLeft Hand InnerLandside Plate1/2”590571980671C(1) 7/16” (2) 1/2”45 LBSper CTN/6Z-59057XLfor rear plowbottomRight Hand InnerLandside Plate: Nuts &Bolts Not Included1/2”590571980672C(5) 9/16” (1) 1-1/2”11 LBS EACHZ-59057XLLfor rear plowLeft Hand InnerLandside Plate: Nuts &1/2”590571980671C(5) 9/16” (1) 1-1/2”11 LBS EACHZ-59057XL058UV59057The 59057/back plate, 058UV/wear pad assembly can be used to replace the older 342 front & 343 rear landsideby using the 59057/058UV for both front & rear.59057: (A) 7/16 x 1-1/2”CH(B) 1-1/4” Hole(C ) 1/2” Holewww.norwest-mfg.comPlow Parts 400-15

LANDSIDES &W E A R PA D Sfor JOHN DEERENORWESTPART #Nuts & Bolts INCLUDEDDESCRIPTIONSIZEOEM ## OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)MODELS: NU400-NU450 METRIC SERIES47716WRight Hand LandsideWear Pad; (3) Hole1/2” Wear PadA45226(3) 5/8”53 LBSper CTN/647716WLLeft Hand LandsideWear Pad; (3) Hole1/2” Wear Pad—(3) 5/8”53 LBSper CTN/657046(2) 1/2”24 LBSper CTN/6MODELS: SWITCH PLOW57046Landside Wear Pad;(2) Hole1/2”for MASSEY FERGUSONNORWESTPART #DESCRIPTIONNuts & Bolts INCLUDEDSIZEOEM ## OF BOLT HOLES& HOLE SIZESCTN. WEIGHT(Approx. LBS)MODELS: “N” BOTTOM (OLDER “N” SERIES)002WFront Landside1/2”660002M1(2) 7/16” (1) 5/8”50 LBSper CTN/6003WRear Landside1/2”660003M1(2) 7/16” (1) 5/8”50 LBSper CTN/6MODELS: “N” BOTTOM (NEWER “N” SERIES & 88 SERIES)475WRRight Hand; Front orRear Landside--1/2”475153M1F475973M1R(2) 7/16” (1) 5/8”(2) 1/2” Plain HoleFor Left Hand Landsides, order 475WR , flip over and use carriage bolts to mount.47716W475WL57046Plow Parts 400-1660 LBSper CTN/6www.norwest-mfg.com

LANDSIDES &W E A R PA D Sfor MELROENORWESTPART #Nuts & Bolts INCLUDEDDESCRIPTIONSIZEOEM ## OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)MODELS: OLIVER STYLE BOTTOMS847WRight Hand LandsideWear Pad1/2” Wear Pad6526847(2) 7/16”22 LBSper CTN/6847WLLeft Hand LandsideWear Pad1/2” Wear Pad—(2) 7/16”22 LBSper CTN/6for OLIVER & WATTSNORWESTPART #DESCRIPTIONNuts & Bolts INCLUDEDSIZEOEM ## OF BOLT HOLES CTN. WEIGHT& HOLE SIZES(Approx. LBS)MODELS: R419 & R619270WANew StyleRight Hand Landsideuse 058UV wear pad1/2”218270B(3) 5/8” (1) 7/16”57 LBSper CTN/6270WA-LNew StyleLeft Hand Landsideuse 058UVL wear pad1/2”—(3) 5/8” (1) 7/16”57 LBSper CTN/6058UVRight Hand LandsideWear Plate1/2”—(2) 7/16”22 LBSper CTN/6058UVLLeft Hand LandsideWear Plate1/2”—(2) 7/16”22 LBSper CTN/61/2”—(2) 5/8” (2) 7/16”10.5 LBS EACH1/2”—(2) 5/8” (2) 7/16”10.5 LBS EACHRight Hand LandsideZ-WATTLSR Nuts& Bolts Not IncludedZ-WATTLSLLeft Hand LandsideNuts & Bolts Not comPlow Parts 400-17

MOLDBOARDS*R419-R619-16MOLDBOARDS:Moldboards are offered for plow bottoms using blade type shares. The solid steel moldboards offer the farmeran economical moldboard with the same top quality as our other products. These moldboards are recommendedfor all types of soil where scouring is not a problem. All moldboards are oil-quenched and heat-treated.Moldboards come complete with bolts and nuts.for DMINuts & Bolts INCLUDEDNORWESTPART #DESCRIPTIONSIZEOEM ## OF BOLT HOLES WEIGHT EACH& HOLE SIZES(Approx. LBS)MODELS: HYDRA –WIDER419-R619-16Right Hand Moldboard5/16” x 16” or 18”33111601(5) 7/16”30 LBSR419-R619-16LLeft Hand Moldboard5/16” x 16” or 18”33111601L(5) 7/16”30 LBSfor CASE/IHNORWESTPART #DESCRIPTIONNuts & Bolts INCLUDEDSIZEOEM ## OF BOLT HOLES WEIGHT EACH& HOLE SIZES(Approx. LBS)MODELS: SUPER CHIEF462314**Right Hand Moldboard5/16” x 16”, 18”, & 20”462314R488265R58996C(4) 7/16”33 LBS464603Left Hand Moldboard5/16” x 16”, 18”, & 20”46403L(4) 7/16”33 LBS491634High Back Moldboard5/16” x 18”491634(4) 7/16”34 LBS** HIGH SPEEDR419-R619-16Plow Parts 400-18464603www.norwest-mfg.com

MOLDBOARDS*NU1048Lfor JOHN DEERENORWESTPART #Nuts & Bolts INCLUDEDDESCRIPTIONSIZE# OF BOLT HOLES WEIGHT EACH& HOLE SIZES(Approx. LBS)OEM #MODELS: NU1048NU1048Right Hand Moldboard5/16” x 18”A17431(8) 7/16”38 LBSNU1048LLeft Hand Moldboard5/16” x 18”A17432(8) 7/16”38 LBSMODELS: NU400-NU450 METRIC SERIESRight Hand32209Metric MoldboardLeft Hand32209LMetric Moldboard5/16” x 18”32209(4) 7/16”38 LBS5/16” x 18”—(4) 7/16”38 LBSfor MASSEY FERGUSONNORWESTPART #DESCRIPTIONNuts & Bolts INCLUDEDSIZE# OF BOLT HOLES WEIGHT EACH& HOLE SIZES(Approx. LBS)OEM #MODELS: “N” BOTTOM660204Right Hand Moldboard5/16” x 16”660204-M1660206(5) 7/16”29 LBS661651LLeft Hand Moldboard5/16” x 16”66165L(5) 7/16”29 LBSfor MELROENORWESTPART #Nuts & Bolts INCLUDEDDESCRIPTIONSIZEOEM ## OF BOLT HOLES WEIGHT EACH& HOLE SIZES(Approx. LBS)MODELS: OLIVER STYLE BOTTOMSR419-R619-16Right Hand Moldboard5/16” x 16”6522185(5) 7/16”30 LBSR419-R619-16LLeft Hand Moldboard5/16” x 16”6522185L(5) 7/16”30 comPlow Parts 400-19

MOLDBOARDS*660204for MINNEAPOLIS MOLINE &NORWESTPART #DESCRIPTIONNuts & Bolts INCLUDEDDAVID BROWNSIZE# OF BOLT HOLES WEIGHT EACH& HOLE SIZES(Approx. LBS)OEM #MODELS: NL SERIES (Minneapolis Moline) & GENERAL PURPOSE (National David Brown)R419-R619-16Right Hand Moldboard5/16” x 16”20P42HS-139(5) 7/16”30 LBSR419-R619-16LLeft Hand Moldboard5/16” x 16”—(5) 7/16”30 LBSfor OLIVERNuts & Bolts INCLUDEDNORWESTPART #DESCRIPTIONSIZE# OF BOLT HOLES WEIGHT EACH& HOLE SIZES(Approx. LBS)OEM #MODELS: R419 & R619R419-R619-16Right Hand Moldboard5/16” x 16”R419-16(5) 7/16”30 LBSR419-R619-16LLeft Hand Moldboard5/16” x 16”R419-16L(5) 7/16”30 LBSforNuts & Bolts INCLUDEDNORWESTPART #DESCRIPTIONSIZE# OF BOLT HOLES WEIGHT EACH& HOLE SIZES(Approx. LBS)OEM #MODELS: OLIVER STYLE BOTTOMR419-R619-16Right Hand Moldboard5/16” x 16”215802A4258(5) 7/16”30 LBSR419-R619-16LLeft Hand Moldboard5/16” x 16”—(5) 7/16”30 LBSR419-R619-16Plow Parts 400-20R419-R619-16Lwww.norwest-mfg.com

S W I T C H P L O W PA R T S*7921736SWITCH PLOW SHARES:Switch plow shares are designed and manufactured to use with the new two-way plows such as John Deere,Harrell, Long, and others.SWITCH PLOW PARTS:Switch plow parts are manufactured using high-carbon, heat-treated steel. Moldboards and shins aremanufactured using solid steel. Landsides are packed with required nuts and bolts. All other parts are soldwithout fasteners.Nuts & Bolts NOT includedexcept Landsidesfor HARRELLNORWESTPART #DESCRIPTIONSIZEOEM ## OF BOLT HOLES WEIGHT EACH& HOLE SIZES(Approx. LBS)7921736Moldboard ; Plain19-7/8” x 17-1/2” x 1/4”7921736(8) 1/2” Plow Head30 LBSRSH79006Ribbed Switch Share;Plain27-1/2” x 3/8”7900636(5) 7/16” Plow Head11.5 LBSSWH79006Double-End Share; Plain—7900636(5) 1/2” Plow Head11.5 LBSSWH79028Double-End Share;Hardfaced—7902836(5) 1/2” Plow Head12 LBS7920836Shin (Lower); Chrome—7920836—1.79 LBS9820736Shin (Upper); Steel5/16”9820736—1.9 LBS79010WLandside (Short); PlainNuts & Bolts INCLUDED4” x 6-1/2” x 1/2”79010W(2) 9/16” Plow Head23 LBSper CTN/679206WLandside (Long); PlainNuts & Bolts INCLUDED4” x 13” x 1/2”218270B(4) 9/16” Plow head46 LBSper CTN/6Switch MoldboardLandside (Long)Landside (Short)Double-End ShareFor HarrellPart # 7921736For HarrellPart # 79206WFor HarrellPart # 7910WFor HarrellPart # RSH79006/SWH79006www.norwest-mfg.comPlow Parts 400-21

S W I T C H P L O W PA R T S*79010WNuts & Bolts NOT includedexcept Landsidesfor LONGNORWESTPART #DESCRIPTIONSIZEOEM #SWL791406Double-End Share; Plain4-1/2” WideB791406(5) 9/16”Plow Head11.5 LBSSWL791407Double-End Share;Hardfaced4-1/2” WideB791407(5) 9/16”Plow Head12 LBSLandside (Short); PlainNuts & Bolts INCLUDED4” x 6-1/2” x 1/2”Plow Headper CTN/679010W791404W794104for JOHN DEERE# OF BOLT HOLES WEIGHT EACH& HOLE SIZES(Approx. LBS)Nuts & Bolts NOT included(2) 9/16” Landsides.23 LBSexceptNuts & Bolts NOT includedNORWESTPART #DESCRIPTIONSIZEOEM ## OF BOLT HOLES& HOLE SIZESWEIGHT EACH(Approx. LBS)57264Moldboard; Plain19-7/8” x 17-1/2” x 5/16”P-57264(6) 1/2” Plow Head21 LBSRSD57270Ribbed Switch Share; Plain4-1/2” x 27-1/2” x 3/8”RSD57270(4) 7/16” Plow Head11.5 LBSSWD57270Double-End Share; Plain4-1/2” x 27-1/2” x 3/8”5727057043(4) 1/2” Plow Head11.5 LBSSWD57043Double-End Share;Hardfaced4-1/2” x 27-1/2” x 3/8”5727057043(4) 1/2” Plow Head12 LBS57522Reversible Landside; Plain8” x 11-1/2” x 5/16”P57522(4) 1/2” Plow Head8.1 LBS57265Shin (Left Hand)5/16”P-57265(3) 7/16” Plow Head5.6 LBSper CTN/657266Shin (Right Hand)5/16”P57266(3) 7/16” Plow Head5.6 LBSper CTN/6Double-End ShareTwo-Way Moldboard & ShinsFor Long: Part # SWL791406For John Deere: Part # 57264Landside (Short)Reversible LandsideFor Long: Part # 7910WFor John Deere: Part # 57522Double-End ShareFor John Deere: Part # RSD57270/SWD57270Plow Parts 400-22www.norwest-mfg.com

*57264*57266S W I T C H P L O W PA R T S*5726557522792083679206W79010W79217369820736C O N S E R VAT I O N D E E P - T I L L S YS T E MCONSERVATION DEEP TILL SYSTEM:The Conservation Deep-Till System is proven to provide the ideal combination of deep tillage, soil mixing, andproper management of nutrients while meeting most conservation guidelines. These special moldboards convertyour existing plow into a conservation tillage tool by allowing 35%-65% of crop residue to stay on the surfacewhile shattering and mixing all soil at a depth of up to 14”. Residue amounts and tillage depths will varydepending on the make and model of the plow, field conditions and the adjustment of your machine.The conservation deep-till system replaces only the moldboard on the plows listed below.Conservation moldboards are manufactured using high-carbon, heat-treated steel. Nuts & Bolts Included.CONSERVATION MOLDBOARDSNuts & Bolts INCLUDEDTO FITOEM #NORWEST PART #BOTTOM SIZEWEIGHT EACH(Approx. LBS)IH SUPER CHIEF700 & 800 SERIES462310, 5899646231414”-20” OR 16” & 18”33 LBSJD NU-1048 SERIES(Right Hand)A17431NU104818”38 LBSJD NU-1048 SERIES(Left Hand)A17431NU1048L18”38 LBSOLIVER/WHITE; someDMI, CASE & FORD withOLIVER BOTTOMSR419, R619R419-R619-1616”-18”30LBSOLIVER/WHITE; someDMI, CASE & FORD withOLIVER BOTTOMSR419, R619R419-R619-16L16”-18”30 LBSwww.norwest-mfg.comPlow Parts 400-23

PLOW BOLTS & NUTSPART #DESCRIPTIONBCH12138L1/2” X 1-3/8” LEFT HAND CLIPPED HEAD BOLTBCH12138R1/2” X 1-3/8” RIGHT HAND CLIPPED HEAD BOLTBCH716112L7/16” X 1-1/2” LEFT HAND CLIPPED HEAD BOLTBCH716112R7/16” X 1-1/2” RIGHT HAND CLIPPED HEAD BOLTBCH76114L7/16” X 1-1/4” LEFT HAND CLIPPED HEAD BOLTBCH761147/16” X 1-1/4” RIGHT HAND CLIPPED HEAD BOLTBCHM16M4016MM X 40MM RIGHT HAND CLIPPED HEAD BOLTBCNM1616MM RIGHT HAND METRIC NUTPART #DESCRIPTIONFPB123001/2” X 3” PLOW BOLTFPB342003/4” X 2” PLOW BOLTFPB342503/4” X 2-1/2” PLOW BOLTFPB343003/4” X 3” PLOW BOLTFPB381503/8” X 1-1/2” PLOW BOLTFPB382003/8” X 2” PLOW BOLTFPB382503/8” X 2-1/2” PLOW BOLTFPB383003/8” X 3” PLOW BOLTPlow Parts 400-24PART #DESCRIPTIONBHN12L1/2” LEFT HAND NUTBHN12R1/2” RIGHT HAND NUTBHN716L7/16” LEFT HAND NUTBHN716R7/16” RIGHT HAND NUTFPB1003001” X 3” PLOW BOLTFPB121501/2” X 1-1/2” PLOW BOLTFPB122001/2” X 2” PLOW BOLTFPB122501/2” X 2-1/2” PLOW BOLTPART #DESCRIPTIONFPB582005/8” X 2” PLOW BOLTFPB582505/8” X 2-1/2” PLOW BOLTFPB583005/8” X 3” PLOW BOLTFPB761257/16” X 1-1/4” PLOW BOLTFPB761507/16” X 1-1/2” PLOW BOLTFPB762007/16” X 2” PLOW BOLTFPB762507/16” X 2-1/2” PLOW BOLTFPB763007/16” X 3” PLOW BOLTwww.norwest-mfg.com

PLOW SHARES *RSO185LP LW PLOW SHARES: The LW Long Wear Share is a heavy duty share produced from a full 3/8” secon. The long wear share is upset forged at the nose for long, break resistant wear. The LW Share is oil quenched and heat-treated. LW PLOW SHARES HARDFACED: The LW Hardface

Related Documents:

John Deere Moldboard Plow Parts Plow Shares - Sold 6 per box only. 20” (500 mm), 3 bolt share for Metric bottoms. **(Wiese drop ship) * All metric plow shares have the same bolt pattern. *Hardsurfaced plow shares will be drop shipped from Perry, Ia. Plow Shins - Sold 6 per box only. Order NO. descriptiON Wt./cartONFile Size: 2MBPage Count: 13

28. 72-inch Snow Plow 29. Plow Hydraulic Lift 30. Plow Electric Chute And Deflector 31. Plow Hydraulic Angulation Kit 32. Blower And Plow Marker Kit 33. 66-inch Rotary Broom 34. 44-inch Rough Cutter 35. 60-inch Finish Mower 36. Disc Plow 37. 4500 lb Super Winch STORAGE 38. Crew / Long Bed Under-seat Storage 39. Rear Rack 40. Dual or Quad Floor .

sembly, engage the flanges into the plow mount. Adjust the plow mounts side to side for best fit to flanges. The plow mounts should be straight with the ears of the flanges. When the plow mount fas-teners are tightened, the flange should be able to slide in the plow mounts easily. See figure 5. 6. With the push tube assembly in place, tighten all

The goal of the Tow Plow operator's course is to promote safe and proper operations and preventive maintenance practices with the Tow Plow. Introduction The Tow Plow is a trailer snow plow designed to tow behind a truck with a standard-mounted front plow. This confi guration can provide a cleared path as wide as 25' with a 12' front plow .

600 x 300 350 1260 50 6 14 600 x 300 669 2409 50 21 9 600 x 300 1137 4094 50 60 6 600 x 300 1750 6300 50 142 5 400 x 400 400 1440 50 9 12 400 x 400 674 2425 50 27 8 400 x 400 1170 4212 50 80 6 400 x 400 1750 6300 50 179 4 500 x 400 360 1296 50 5 15 500 x 400 715 2574 50 19 9 500 x 400 1330 4787 50 66 6 500 x 400 1800 6480 50 122 5 600 x 400 450 1620 50 5 15 600 x 400 958 3448 50 24 9 600 x 400 .

Case-IH (also International Harvester) Moldboard Plow Parts WLWI144 Super Chief plow share, 14" 4 bolt. Wiese no. LIH144. 43 55815 26.50 WLWI164 Super Chief plow share, 16" 4 bolt. Wiese no. LIH164. 47 26815 26.60 WLWI184 Super Chief plow share, 18" 4 bolt. Wiese no. LIH184. 53 15025 29.30

RT-366 36" Tiller X WT-244 24" Tiller (2) X X X X X X X X 7-1211 36" Tiller X(7) RT-367 36" Tiller X(7) PP-411 8" Plow (7-1421) X X X X X X X X PP-513 12" Plow (7-1411) X X X PP-85 8" Plow X X X X X X X X PP-101 10" Plow X X X X X X X X PP-1064 10" Plow X DP-861 32" Disc (7-1511) X X X X X X X X TDH-163 Tandem Disc X WF-60 Front Wheel Weight (81211) X(1) X(1) X X X X X X X X X WW-126 Rear .

3 Predicate Logic 4 Theorem Proving, Description Logics and Logic Programming 5 Search Methods 6 CommonKADS 7 Problem Solving Methods 8 Planning 9 Agents 10 Rule Learning 11 Inductive Logic Programming 12 Formal Concept Analysis 13 Neural Networks 14 Semantic Web and Exam Preparation . www.sti-innsbruck.at Agenda Motivation Technical Solution – Introduction to Theorem Proving .