Technical Drawing Tutorial - Faculty Of Engineering And .

3y ago
2.39 MB
38 Pages
Last View : 2d ago
Last Download : 5m ago
Upload by : Baylee Stein

Technical Drawing TutorialDoug SmithMemorial University of NewfoundlandOctober 18, 2012

Drawing BasicsWhat is a technical drawing? A drawing that displays technical information to the readerthrough specific visuals, directions, notes, etc A good technical drawing should be informative, clear,NEAT, unambiguous and not cluttered.

Drawing BasicsProfile View

Drawing BasicsPlan View Viewed from above

Drawing BasicsFWD View (Bow view) FWD looking aft.

Drawing BasicsSection View Looking in direction of arrows

Drawing BasicsStation View Slice at that section

Type of Ship Drawings Lines Plan General Arrangements (Profile and Decks) Structural DrawingsOther Drawings System Drawings Fire and Safety Plan Escape Plan Etc

Lines Plan A collection of lines at well defined positions that are usedto define a hull form Projections of straight lines on to the hull surface from XY-Z planes Produce Waterlines, Buttocks and Station curves

Lines Plan

Lines Plan

General Arrangement General Arrangement of hull, bulkheads, decks and allmachinery, equipment and outfitting Profile and Decks (sometimes FWD view as well)

General Arrangement Profile (outboard Profile)

General Arrangement Decks

General Arrangement

General Arrangement

Drawing Elements Title Block Baseline Centerline Labels

Title Block Title Name Date LOGO Project Number Revision History Drawing Number Scale Etc

Rhino3D Rhino3D is 3D modeling program Can also be a useful tool for technical 2D drawings Can be used to produce 2D technical drawings but tailoredmore towards 3D renderings than 2D line drawings Now create hull lines for a canoe hull .

Rhino3D Open ”Right”viewport (Y-ZPlane) Arrange pointsthat midshipsection will passthrough.


Rhino3D Place points on X-Y Plane (TOP View) and Move pointsup to deck edge. Then draw polyline through points

Rhino3D Change lines to separate layer Then turn off layer with points

Rhino3D Draw 2 lines from midship-centerline to the bow-deck Fillet edges Then join curves

Rhino3D Sweep 2 rails with the midship section as the cross curve Then mirror surface about the midship Then Join 2 surfaces together

Rhino3D Rename new layers Waterlines, Buttocks, Stations

Rhino3D Select the waterlines layer and place straight lines in theX-Z plane Then project curves onto surface using the front view Repeat for Buttocks and Stations in the respective views

Rhino3D Hull lines to define the ship geometry

Rhino3D Select lines and Make 2-D drawing

Rhino3D Select 2D lines and export selected as .dwg file

AutoCad Import dwg to AutoCad

AutoCad Go to paper space(layout1) Select viewport Open propertieswindow Play with scale to getan idea of the scale youwill need Note: use page setupto set paper size.

AutoCad Go to paper space(layout1) Select viewport Open propertieswindow Play with scale to getan idea of the scale youwill need Note: use page setupto set paper size.

AutoCad Add labels to views

AutoCad Adjust text height to appear correctly in paper space

AutoCad Add Baseline, Centerline, Labels, Station numbering

AutoCad After drawing is complete create title block Note: Better to draw title block in paper space then scaleviewport inside the title block

Technical Drawing Questions?

A drawing that displays technical information to the reader through specific visuals, directions, notes, etc A good technical drawing should be informative, clear, NEAT, unambiguous and not cluttered. Drawing Basics Profile View . Drawing Basics Plan View Viewed from above . Drawing Basics FWD View (Bow view) FWD looking aft. Drawing Basics Section View Looking in direction .

Related Documents:

Here is the link to get/download up-to-date West African Examination Council WAEC Technical Drawing Past Questions, Eassy, Objective and Practical Keywords WAEC Technical Drawing Objective Questions, WAEC Technical Drawing Building Plan Question, Download WAEC Technical Drawing Past Questions, How to Get WASSCE Technical Drawing Questions and .

Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus PAGE 1-8 Drawing Template The foundation of a SolidWorks drawing is the Drawing Template. Drawing size, drawing standards, company information, manufacturing and or assembly requirements, units and other properties are defined in the Drawing Template.

One Point Perspective: City Drawing A Tutorial Engineering 1 Tatum. When completing this tutorial, you must use the following items: * White, unlined paper * A ruler or other straight-edge * A pencil. Begin by setting up your paper for a one-point perspective drawing. Draw a horizon line and a vanishing point. Draw two orthogonals (diagonal .File Size: 727KBPage Count: 41Explore furtherOne point perspective city: The step by step guide .pencildrawingschool.comHow to Draw One Point Perspective City Printable Drawing .www.drawingtutorials101.comOne Point Perspective Drawing Worksheets - Learny Kidslearnykids.comPerspective Drawing - An Easy Lesson in 1 Point .www.drawinghowtodraw.comThe Helpful Art Teacher: Draw a one point perspective city .thehelpfulartteacher.blogspot.comRecommended to you b

2: Building Drawing and Unit 3: Mechanical Engineering Drawing. Three questions will be set on Building Drawing and three on Mechanical Engineering Drawing. Candidates must attempt two questions: one 2D working/assembly drawing and one 3D solid model design drawing (from area of choice). The working/assembly drawing

Drawing Block Title - 03 Grids 1:12 014200-003 Drawing Block Title - 04 Grids 1:16 014200-004 Drawing Block Title - 05 Grids 1:20 014200-005 Drawing Block Title - 06 Grids 1:24 014200-006 Drawing Block Title - 07 Grids 1:28 014200-007 Drawing Block Title - 08 Grids 1:32 014200-008 Drawing Block Title - 09 Grids 1:36 014200-009 Drawing Block .

Pencil drawing is a process, artists start drawing by making light outlines that help them create a drawing. You can also erase later on the outlines and people will hardly notice that the drawing came from simple lines. Using pencils in drawing is inexpensive because you will just need a pencil and paper to create a basic drawing.

Civil 3D Points or Drawing Points exist only in a single drawing; if the same point is needed in another drawing, it must be created in that drawing, as there is no way to expose Civil 3D Points or Drawing Points from drawing to drawing. Throughout this manual, we'll use the terms Civil 3D Points or

Peter Norvig Prentice Hall, 2003 This is the book that ties in most closely with the module Artificial Intelligence (2nd ed.) Elaine Rich & Kevin Knight McGraw Hill, 1991 Quite old now, but still a good second book Artificial Intelligence: A New Synthesis Nils Nilsson Morgan Kaufmann, 1998 A good modern book Artificial Intelligence (3rd ed.) Patrick Winston Addison Wesley, 1992 A classic, but .