Tower Components - Rosenbergeronline.us

2y ago
54 Views
4 Downloads
4.81 MB
60 Pages
Last View : Today
Last Download : 2m ago
Upload by : Kamden Hassan
Transcription

Tower ComponentsRSS010115

Tower ComponentsRosenberger Site SolutionsRosenberger Site Solutions is a Stocking Distributor of Sabre Industries. Focusing on Ease of ContractorInstallation, in this catalog you will find a complete line-up of Antenna Mounting Systems along with RooftopMounts, Guy Cable and Hardware accessories.Contact us if you do not see what you need. We have additional resources and will be happy to assist inmeeting your requirements.Table of ContentsTOWER ACCESSORIES:SAF-T-Boom — Preassembled4ULTRA-Boom 5Heavy Duty V-Boom 6Large Leg Adapter 7Universal Swivel Knuckle Tieback Kit7Tieback Clip Kit 7Parabolic Dish Ice Shield8Parabolic Antenna Ice Shield8Universal Microwave Mounting Kit8Universal Pipe Mounting Kit93’ Standoff for Round & Angle Leg Towers9Pipe to Pipe Mounting Kit9Water Tank Handrail Mount96” Pipe to Pipe Standoff10Pipe to Pipe Crossover Kit10Crossover Plates - Plates Only 10Crossover Clamp 10Universal Sidearm 11Double Antenna Clamp - 2’ Separation11Tri-Sector Cluster Mount 11Heavy Duty Sidearm 11Tower Standoff w/ 4’ Face (optional)113’ Sidearm Assembly for 1200 TLWDand 1800 TLWD & SRWD126’ Sidearm Assembly for1800 TLWD & SRWD 12Dish Mount Assembly for1200 TLWD and 1800 TLWD & SRWD12Stand-Off Brackets 12Camera Mounts for 1800 TLWD & SRWD12RRU Mount Kits 142POLE ACCESSORIES:Antenna Separation Kits 13Low Profile Platform Kit15SAF-T-Arms — Square 16T-Arm Assemblies (Square & Round)17Round Member T-Arms 18Antenna Pipes 1912’ Low Profile Square Platform Kit20Tri-Collar Bracket 20Bi/Quad Collar Bracket 20Monopole Dish Mount 20Standoff Arm 20Chain Mount 20Microwave Tieback Kit for Chain Mounts21Monopole Waveguide Support21Monopole Coax Support Bracket21Cluster Support Bracket 21Snap-In Adapter Bracket 21Stainless Steel Banding 22Buckles 22Tensioning Tool 22Wraplock Kit 22Galvanized Steel Step Bolt Assembly22Step Bolt Anchor Brackets22Step Bolt Clip, Black Steel22Access Ports, Black Steel23ROOFTOP MOUNTS:Non-Penetrating Rooftop Sector Frame2410’ Face Corner Roof Mount24Water Tank & Tri-Sector Roof Mount24Water Tank Sector Mount24Water Tank Tripod 24Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us

Rosenberger Site SolutionsNon-Penetrating Tripod Mount25Heavy Duty Tripod Mount25Non-Penetrating Ballast Frame253’ x 3’ Quad Pod Roof Mount25Dual Wall Mount 26Universal Wall Mount 26Corner Wall Mount 26Rooftop Bridge Kit 26Rooftop Bridge Sleeper 26Rooftop Bridge Adjustable Splice Kits27Rooftop Bridge Straight Splice Kit27Rubber Mat 27Uni-Strut 27Equipment Rack 27Steel Cable Tray (UL Listed)28Straight Pieces - Steel Cable Tray2890 Horizontal Bend - 24” Radius2845 Horizontal Bend - 24” Radius28Universal Degree Inside/Outside29Horizontal Tee - Steel Cable Tray29Horizontal Cross - Steel Cable Tray29Cable Tray Splice Kits - Steel Cable Tray29BTS Platform 30Universal Equipment Platform Kit30Tower ComponentsWaveguide Ladder Stacker Kit36CABLE & HARDWARE ACCESSORIES:Guy Cable Hardware Kit37E.H.S. Guy Strand (Left Hand Lay)37Bird-Flight Diverter 38Galvanized Heavy Thimble 38Galvanized Wire Rope Clip38Galvanized Dead-End Sleeve (Ice-Clips)39Galvanized Dead-End Grip (Preforms)39Galvanized Jaw-Jaw Turnbuckle39Galvanized Jaw-Eye Turnbuckle40Galvanized Screw Pin Anchor Shackle40Galvanized J-Bolt Assembly 40Galvanized U-Bolt Assembly 41SS Fillister-Head Screw Assembly42Stainless Steel Bolt Assembly42SS Round-Head Screw Assembly42Stainless Steel Flat Washer43Stainless Steel Lock Washer43Stainless Steel Hex Nut43Stainless Steel Toothed Lock Washer43Stainless Steel Hook Bolt Assembly43Stainless Steel Threaded Rod Coupler43TRANSMISSION LINE SUPPORT:LIGHTWEIGHT TOWERS & ACCESSORIES:Waveguide Bridge, 1’ Wide, Two Posts- Direct Burial Type 31Waveguide Bridge, 2’ Wide, Two Posts- Direct Burial Type 31Waveguide Bridge, 2’ Wide, Four Posts- Direct Burial Type 32Waveguide Bridge, 1’ Wide, Two Posts- Base Plate Type 32Waveguide Bridge, 2’ Wide, Four Posts- Base Plate Type 33General Support Bracket 33Universal Z-Bracket Trapeze Kit33Triple-T Trapeze 33Ice Bridge kit with 13’-4” Pipe Posts34Direct Burial Pipe Post Kit35Base Shoe Plate 35Grip Strut Channel 35Base Plate Pipe Post Kit35Knock Down Waveguide Ladder Kit35Waveguide Ladder Hardware Kit36Universal Waveguide Standoff Kit36Rohn 25G Guyed Tower44Rohn 45G Guyed Tower46Rohn 55G Guyed Tower48Rohn SSV Towers 49Sabre 1200 TLWD Guyed Tower50Sabre 1800 TLWD Guyed Tower52Sabre 1800 SRWD Guyed Tower54Sabre Series UL Self-Supporting Tower55Sabre Series VL Self-Supporting Tower55Lightweight Tower - DT56Light Duty Tower withHinged Base Plate & Standoff Frame56PART NUMBER INDEX 57Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us3

Rosenberger Site SolutionsTower ComponentsDesign SpecificationsMeets the latest revision of ANSI/TIA-222 Codes(4) 8’ x 1’ (2.44 m x 304.8 mm) Panels at 200’ (60.96 m)With 120 mph (193.12 kph) Basic Wind SpeedDead Load 500 lbs (226.8 kg)Live Load 250 lbs (113.4 kg)The Torsion Tube eliminatestwist of tower attachment pointsSAF-T-Boom — Pre-assembledMounts to straight or tapered tower legs, round members 1-1/2” to 5-9/16” OD (38.1 mm to 141.29 mm) and angle from 2-1/2” x 2-1/2”(63.5 mm x 63.5 mm) to 4” x 4” (101.6 mm x 101.6 mm). The pivot feature allows for rotation of the frame to desired azimuths. Themounting bracket provides additional flexibility with 0-5 down-tilt capability. One 10’ (3.05 m) tie-back arm included. Includes enoughmounting hardware for four (4) 2-3/8” OD (60.33 mm) antenna pipes. (Antenna Pipe sold separately at the bottom of the page.) Capableof mounting to monopoles utilizing Tri-Collars (page 19) and Monopole Dish Mounts (page 19).Frames come pre-assembled and folded together for efficient shipping and easy handling in the field.Item #DescriptionWt. lb.Wt. kg.C10-150-02210' (3.05 m) SAF-T-Boom with 3' (914.4 mm) Standoff330.00149.69C10-150-02312' (3.66 m) SAF-T-Boom with 3' (914.4 mm) Standoff351.00159.21Large Leg Adapter KitAllows Knock Down T-Boom to fit round legs from 1-1/2” to 10-3/4” OD (38.1 mm to 273.05 mm) and angle legs from2-1/2” x 2-1/2” (63.5 mm x 63.5 mm) to 8” x 8” (203.2 mm x 203.2 mm).Item #DescriptionC10-171-304Large Leg Adapter KitWt. lb.Wt. kg.51.0023.13Antenna PipesItem #DescriptionWt. lb.Wt. kg.C10-981-2232-3/8" OD x 5' (60.33 mm x 1.52 m) Long Mounting Pipe16.107.30C10-981-2062-3/8" OD x 6' (60.33 mm x 1.83 m) Long Mounting Pipe19.308.75C10-981-2072-3/8" OD x 7' (60.33 mm x 2.13 m) Long Mounting Pipe22.5010.21C10-981-2222-3/8" OD x 8' (60.33 mm x 2.44 m ) Long Mounting Pipe25.7011.66C10-981-2092-3/8" OD x 9' (60.33 mm x 2.74 m) Long Mounting Pipe28.9013.11C10-981-2102-3/8" OD x 10'-6" (60.33 mm x 3.2 m) Long Mounting Pipe33.7015.294Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us

Tower ComponentsRosenberger Site SolutionsDesign SpecificationsThe Torsion Tube eliminatestwist of tower attachment pointsMeets the latest revision of ANSI/TIA-222 Codes(4) 8’ x 1’ (2.44 m x 304.8 mm) Panels at 200’ (60.96 m)With 120 mph (193.12 kph) Basic Wind SpeedDead Load 500 lbs (226.8 kg)Live Load 250 lbs (113.4 kg)ULTRA-BoomMounts to straight or tapered tower legs, round members 1-1/2” to 5-9/16” OD (38.1 mm to 141.29 mm) and angle from 2-1/2” x 2-1/2”(63.5 mm x 63.5 mm) to 4” x 4” (101.6 mm x 101.6 mm). The pivot feature allows for rotation of the frame to desired azimuths. Themounting bracket provides additional flexibility with 0-5 down-tilt capability. One 10’ (3.05 m) tie-back arm is included. Includes enoughmounting hardware for four (4) 2-3/8” OD (60.33 mm) antenna pipes. (Antenna Pipe sold separately at the bottom of the page.) Capableof mounting to monopoles utilizing Tri-Collars (page 19) and Monopole Dish Mounts (page 19)Item #DescriptionWt. lb.Wt. kg.C10-852-5018' (2.44 m) ULTRA-Boom with 3' (914.4 mm) Standoff312.00141.52C10-852-53110' (3.05 m) ULTRA-Boom with 3' (914.4 mm) Standoff323.00146.51C10-852-56112' (3.66 m) ULTRA-Boom with 3' (914.4 mm) Standoff334.00151.50C10-852-59114' (4.27 m) ULTRA-Boom with 3' (914.4 mm) Standoff346.00156.94Large Leg Adapter KitAllows Knock Down T-Boom to fit round legs from 1-1/2” to 10-3/4” OD (38.1 mm to 273.05 mm) and angle legs from2-1/2” x 2-1/2” (63.5 mm x 63.5 mm) to 8” x 8” (203.2 mm x 203.2 mm).Item #DescriptionWt. lb.Wt. kg.C10-171-304Large Leg Adapter Kit51.0023.13Item #DescriptionWt. lb.Wt. kg.C10-981-2232-3/8" OD x 5' (60.33 mm x 1.52 m) Long Mounting Pipe16.107.30C10-981-2062-3/8" OD x 6' (60.33 mm x 1.83 m) Long Mounting Pipe19.308.75C10-981-2072-3/8" OD x 7' (60.33 mm x 2.13 m) Long Mounting Pipe22.5010.21C10-981-2222-3/8" OD x 8' (60.33 mm x 2.44 m ) Long Mounting Pipe25.7011.66C10-981-2092-3/8" OD x 9' (60.33 mm x 2.74 m) Long Mounting Pipe28.9013.11C10-981-2102-3/8" OD x 10'-6" (60.33 mm x 3.2 m) Long Mounting Pipe33.7015.29Antenna PipesULTRA-Boom EPA’s (No Ice)8' (2.44 m)10' (3.05 m)12' (3.66 m)14' (4.27 ger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us5

Rosenberger Site SolutionsTower ComponentsDesign SpecificationsMeets the requirements of ANSI/TIA 22-2GBasic Wind Speed 105 mph with no ice and 40 mph with 1” radial iceStructure Class III, Exposure Category C, Topographic Category 1Elevation 300 feet or less:(4) 8’x18”x9’ Panel Antennas(8) 18”x18”x8” RRU’s mounted behind the antennas(4) 8’ x 2-3/8” OD mounting pipesTotal Equipment Weight/mounting location 500#Each mount is adequate for a factored climber load of 750# for nowind conditionHeavy Duty V-BoomHeavy Duty V-Boom Assemblies with 3’ standoff and single tie-back kits. Each kit includes x-over plates and U-Bolts sized as notedbelow. Kits designed to interface to straight or tapered members from 1-1/2” to 5-9/16” O.D. Please contact for additional assistance ifyour requirment is for an angle member.Item #DescriptionWt. lb.Wt. kg.C10-857-01112' V-Boom Assembly with 3' Standoff. Includes Cross-Over kits for mast pipes from 2-3/8"OD to 2-3/8" OD. (4) per kit501141.52C10-857-11112' V-Boom Assembly with 3' Standoff. Includes Cross-Over kits for mast pipes from 2-3/8"OD to 2-7/8" OD (4) per kit509146.51C10-857-02210' V-Boom Assembly with 3' Standoff. Includes Cross-Over kits for mast pipes from 2-3/8"OD to 2-3/8" OD. (4) per kit480151.50C10-857-22210' V-Boom Assembly with 3' Standoff. Includes Cross-Over kits for mast pipes from 2-3/8"OD to 2-7/8" OD (4) per kit480156.94Item #DescriptionWt. lb.Wt. kg.C10-981-2232-3/8" OD x 5' (60.33 mm x 1.52 m) Long Mounting Pipe16.107.30C10-981-2062-3/8" OD x 6' (60.33 mm x 1.83 m) Long Mounting Pipe19.308.75C10-981-2072-3/8" OD x 7' (60.33 mm x 2.13 m) Long Mounting Pipe22.5010.21C10-981-2222-3/8" OD x 8' (60.33 mm x 2.44 m ) Long Mounting Pipe25.7011.66C10-981-2092-3/8" OD x 9' (60.33 mm x 2.74 m) Long Mounting Pipe28.9013.11C10-981-2102-3/8" OD x 10'-6" (60.33 mm x 3.2 m) Long Mounting Pipe33.7015.29Antenna Pipes6Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us

Tower ComponentsRosenberger Site SolutionsLarge Leg AdapterAllows a T-Boom to fit round legs from 5-3/4” to 10-3/4” (146.05 mm to 273.05 mm) diameter and60 angle legs from 5” x 5” (127 mm x 127 mm) to 8” x 8” (203.2 mm x 203.2 mm).Item #DescriptionWt. lb.Wt. kg.C10-171-304Large Leg Adapter Kit51.0023.13Universal Swivel Knuckle Tieback KitProvides additional support to the Sector Mounts and the Sidearm Mounts. All hardware forattachment to the tower mount and leg is included.Item #DescriptionWt. lb.Wt. kg.C10-179-0012-3/8” OD x 10’ (60.33 mm x 3.05 m) Swivel KnuckleTieback.Swivel Knuckle will mount to members: 1-1/2” O.D. to 5-9/16” O.D. Round. 2-1/2” x 2-1/2” to 4” x 4” Angle.59.0026.76C10-179-0022-3/8" OD x 13'-3" (60.33 mm x 4.04 m) SwivelKnuckle Tieback.Swivel Knuckle will mount to members: 1-1/2” O.D. to 5-9/16” O.D. Round. 2-1/2” x 2-1/2” to 4” x 4” Angle.70.0031.75C10-179-0112-7/8" OD x 15'-6" (73.03 mm x 4.72 m) SwivelKnuckle Tieback.Swivel Knuckle will mount to members: 1-1/2” O.D. to 5-9/16” O.D. Round. 2-1/2” x 2-1/2” to 4” x 4” Angle.120.0054.43C10-179-0122-7/8" OD x 20' (73.03 mm x 6.10 m) Swivel KnuckleTieback.Swivel Knuckle will mount to members: 1-1/2” O.D. to 5-9/16” O.D. Round. 2-1/2” x 2-1/2” to 4” x 4” Angle.147.0066.68C10-179-2011.9" OD x 10' (48.26 mm x 3.05 m) Swivel KnuckleTieback.Swivel Knuckle will mount to members: 1-1/2” O.D. to 5-9/16” O.D. Round.35.0015.88Tieback Clip KitUsed in conjunction with Tieback Kits. Hardware for attachment to tower leg is included.Item #DescriptionWt. lb.Wt. kg.C10-177-101Tieback Clip Kit fits 1-1/2” to 5-9/16” OD (38.1 mm to141.29 mm) legs and 2-1/2” x 2-1/2” (63.5 mm x 63.5mm) to 4” x 4” (101.6 mm x 101.6 mm) angle legs15.507.03C10-177-102Tieback Clip Kit fits 5-3/4” to 10-3/4” OD (146.05 mmto 273.05 mm) legs and 5” x 5” (127 mm x 127 mm)to 8” x 8” (203.2 mm x 203.2 mm) angle legs18.008.16Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us7

Rosenberger Site SolutionsTower ComponentsParabolic Dish Ice ShieldProtects parabolic dish antennas up to 12’ (3.66 m) in diameter from falling ice. Mounts to theprovided 4-1/2” OD (114.3 mm) mounting pipe or 4-1/2” OD (114.3 mm) tower leg and fits leg sizesof 2” to 10-3/4” OD or 2” to 8” 60 degree angle.Item #DescriptionWt. lb.Wt. kg.C30-085-102Parabolic Dish Ice Shield, 4' - 8' (1.22 m - 2.44 m).Leg Sizes: 2” OD to 10-3/4” OD 2” to 8” Angle Leg (60 deg)600.00272.16C30-085-103Parabolic Dish Ice Shield, 10' - 12', (3.05 m - 3.66 m).Leg Sizes: 2” OD to 10-3/4” OD 2” to 8” Angle Leg (60 deg)667.00302.09Parabolic Antenna Ice ShieldProtects parabolic dish antennas up to 10’ (3.05 m) in diameter from falling ice. Mounts to theprovided 4-1/2” OD (114.3 mm) mounting pipe or 4-1/2” OD (114.3 mm) tower leg and fits leg sizesof 1-1/2” to 5” OD (38.1 mm to 127 mm). Each kit comes with all hardware required for attachmentto the tower. (Mounting hardware for leg sizes larger than 5” OD (127 mm) is available by specialorder.)Item #DescriptionWt. lb.Wt. kg.C30-085-001For 4' (1.22 m) Parabolic Antenna401.00181.89C30-085-002For 6' - 8' (1.83 m - 2.44 m) Parabolic Antenna701.00317.97C30-085-003For 10' (3.05 m) Parabolic Antenna745.00337.93Universal Microwave Mounting KitMounts microwave dishes to either round or angle legs. Kits also adapt to straight or tapered towers. Kits include4-1/2” OD x 7’ (114.3 mm x 2.13 m) pipe.8Item #DescriptionWt. lb.Wt. kg.C10-153-202Universal Mounting Kit (small) fits 1-1/2" to 5-9/16" OD (38.1 mm to 141.29mm) legs and 2-1/2" x 2-1/2" (63.5 mm x 63.5 mm) up to 4" x 4" (101.6 mmx 101.6 mm) angle legs145.0065.77C10-153-204Universal Mounting Kit (large) fits 5-3/4" to 10-3/4" OD (146.05 mm to273.05 mm) legs and 5" x 5" (127 mm x 127 mm) to 8" x 8" (203.2 mm x203.2 mm) angle legs165.0074.84C10-172-998Universal Mounting Kit (small) fits 1-1/2" to 5-9/16" OD (38.1 mm to 141.29mm) legs and 2-1/2" x 2-1/2" (63.5 mm x 63.5 mm) up to 4" x 4" (101.6 mmx 101.6 mm) angle legs. Double U-bolts for heavy duty pipe connection175.0079.38C10-172-999Universal Mounting Kit (large) fits 5-3/4" to 10-3/4" OD (146.05 mm to273.05 mm) legs and 5" x 5" (127 mm x 127 mm) to 8" x 8" (203.2 mm x203.2 mm) angle legs. Double U-bolts for heavy duty pipe connection195.0088.45C10-179-2011.9" OD x 10' (48.26 mm x 3.05 m) Swivel Knuckle Tieback35.0015.88Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us

Tower ComponentsRosenberger Site SolutionsUniversal Pipe Mounting KitAccommodates pipe sizes from 2-3/8” up to 4-1/2” OD (60.33 mm up to 114.3 mm). Mount can be used on bothtapered and straight leg towers. (Pipe & U-bolt Assembly sold separately on pages 18 & 40.)Item #DescriptionWt. lb.Wt. kg.C10-172-101Universal Pipe Mounting Kit (small) fits1-1/2” to 5-9/16” OD (38.1 mm to141.29 mm) legs and 2-1/2” x 2-1/2” (63.5 mm x 63.5 mm) to 4” x 4” (101.6mm x 101.6 mm) angle legs83.0037.65C10-172-102Universal Pipe Mounting Kit (large) fits 5-3/4” to 10-3/4” OD (146.05 mmto 273.05 mm) legs and 5” x 5” (127 mm x 127 mm) to 8” x 8” (203.2 mm x203.2 mm) angle legs103.0046.723’ Standoff for Round and Angle Leg TowersItem #DescriptionC10-148-0033’ (914.4 mm) Standoff Assembly for 2-3/8” (60.33 mm)44.10mounting pipes. Fits 1-1/2” to 8-5/8” OD (38.1 mm to 291.07mm) legs and 2-1/2” x 2-1/2” (63.5 mm x 63.5 mm) up to 4” x4” (101.6 mm x 101.6 mm) angle legsWt. lb.Wt. kg.20.00Pipe to Pipe Mounting KitAllows attachment of a pipe 1-1/2” to 5” OD (38.1 mm to 127 mm) to a tower leg 1-1/2” to 5” OD (38.1mm to 127 mm). Mounting hardware (5/8” x 1’-6” threaded rod) included.(Pipe sold separately on pages 18)Item #DescriptionWt. lb.Wt. kg.C10-158-100Pipe to Pipe Mounts from 1-1/2" to 5" OD (38.1 mm to 127mm). Kit of two25.511.57C10-158-001GPS Antenna Mounting Kit with 1.9" OD x 2' (48.26 mm x609.6 mm) pipe23.0010.43Water Tank Handrail MountAllows attachment of an antenna to a water tank platform handrail. All mounting hardware and2-3/8” OD x 6’ long pipe (60.33 mm x 1.83 m) are included.Item #DescriptionWt. lb.Wt. kg.C10-169-001Water Tank Handrail43.0019.50Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us9

Rosenberger Site SolutionsTower Components6” Pipe to Pipe StandoffUsed to standoff anything away from a tower leg. Fits 1-1/4” to 3-1/2” OD (31.75 mm to 88.9 mm)round legs. Two can be used for a simple pipe mount. Mounting hardware included.Item #DescriptionWt. lb.Wt. kg.C10-180-001Pipe to Pipe 6" (152.4 mm) Standoff7.003.18C10-180-10190 Pipe to Pipe 6" (152.4 mm) Standoff7.003.18Pipe to Pipe Crossover Kit (5/8” Hardware)Allows two round pipes or solids to be attached together at a right angle to each other. Each kit includes one (1)plate and four (4) U-Bolt Assemblies.Item #DescriptionWt. lbWt. kgC10-902-0112-3/8" OD round to 2-3/8" OD round (60.33 mm to 60.33 mm)13.806.26C10-902-0122-3/8" OD round to 2-7/8" OD round (60.33 mm to 73.03 mm)14.506.58C10-902-0132-3/8" OD round to 3-1/2" OD round (60.33 mm to 88.9 mm)15.206.89C10-902-0042-3/8" OD round to 4-1/2" OD round (60.33 mm to 114.3 mm)16.507.48C10-902-3312" OD round to 2-3/8" OD round (50.8 mm to 60.33 mm)12.105.49C10-902-006Crossover Plate Kit for 2-7/8” & 3-1/2” OD Pipes.C10-902-997Universal Cross Over Plate Kit, 1-1/2” to 5” and 1-1/2” to 5”. Includes Crossover plate (1), 2 holepipe adapter clamp (4) & bolt assemblies (8)Pipe-toPipe Crossover KitUniversalCross-overplate KitDouble Crossover Plate AssemblyDouble crossover plate assembly for installation of 2-3/8” O.D. pipe to 4” Square Tube. Comes with 1/2” U-BoltAssembly and threaded rod.Item #DescriptionWt. lbWt. kgD19996(2) 2-3/8" OD Pipe to 4" Square Tube16.307.40Crossover Plates - Plate OnlyU-Bolt Style Crossver Plates Only. Plates 3/8” and 1/4” Galvanized Steel HDG. U-Bolts sold separate on page 40.Sold per unit / all hardware sold separately. Plates can be purchased as kit under Pipe to Pipe Crossover Kit.Part NumberPipe RangePlate DimensionsThicknessKit P/NCS031232-3/8” OD to 3-1/2”6-3/8” x 7-1/2”3/8"C10-902-013CS031162-3/8” OD to 2-7/8” OD or 3” OD6-3/8” x 6-3/8”3/8"C10-902-012CS031152-3/8” OD to 2-3/8” OD6-3/8” x 6-3/8”3/8"C10-902-011CS000722-3/8" OD to 4-1/2" OD7" x 11-1/2"3/8"C10-902-004CS004282" OD to 2-3/8" OD10" x 10"1/4"C10-902-331Crossover ClampUsed to attach round members perpendicularly to other round members. Hardware included.10Item #DescriptionWt. lb.Wt. kg.C40-204-1001.9" OD to 2-3/8" OD (48.26 mm to 60.33 mm)4.001.81C40-204-1011.9" OD to 2-7/8" OD (48.26 mm to 73.03 mm)5.102.31C40-204-1122-3/8" OD to 2-3/8" OD (60.33 mm to 60.33 mm)4.001.81Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us

Tower ComponentsRosenberger Site SolutionsUniversal SidearmMounts to straight leg towers from 1-1/4” to 5” OD (31.75 mm to 127 mm) round legs and 2” x 2”(50.8 mm x 50.8 mm) to 3-1/2” x 3-1/2” (88.9 mm x 88.9 mm) angle legs. 1.9” OD x 3’ (48.26 mm x914.4 mm) welded mounting pipe and all attachment hardware included. All sidearms include 1.9”OD x 10’ (48.26 mm x 3.05 m) tieback assembly.Item #DescriptionWt. lb.Wt. kg.C10-151-9022' (609.6 mm) Universal Sidearm96.1043.59C10-151-9033' (914.4 mm) Universal Sidearm113.0051.26C10-151-9044' (1.22 m) Universal Sidearm123.5056.02C10-151-9055' (1.52 m) Universal Sidearm134.4060.96C10-151-9066' (1.83 m) Universal Sidearm145.4065.95Double Antenna Clamp - 2’ SeparationAllows for dual antenna attachment to Universal Sidearms and Heavy Duty Sidearms.Accepts and interfaces to round members from 1-1/2” OD to 5” OD. (38.1 mm to 127 mm)(Pipes sold separately on page 18.)Item #DescriptionWt. lb.Wt. kg.C10-854-101Double Antenna Clamp30.6613.91Tri-Sector Cluster MountAllows the mounting of three (3) 2-3/8” OD (60.33 mm) pipes (sold separately on page 14) to atower leg or tripod. It will fit a round member from 2-7/8” to 5-9/16” OD (73.03 mm to 141.29 mm).Mounting hardware includedItem #DescriptionWt. lb.Wt. kg.C10-219-101Tri-Sector Cluster Mount48.0021.77Heavy Duty SidearmIncludes 4” OD x 4’ (0.226 Wall) (101.6 mm x 1,219.2 mm) mounting pipe, stiffarm and all mountinghardware to mount to straight leg towers from 1-1/2” to 5-9/16” OD (38.1 mm to 141.29 mm) roundlegs. Fits towers with face widths between 3’ and 5’ (914.4 mm and 1.52 m).Comes preassembled and ready for installation.Item #DescriptionWt. lb.Wt. kg.C10-149-006Face Mounted for Heavy Duty 6' (1.83 m) Standoff198.7090.13Tower Standoff with an Optional 4’ Face2’ (609.6 mm) Standoff capable of mounting to straight sections 1-1/4” - 5” OD (31.75 mm - 127 mm) and2” x 2” to 3-1/2” x 3-1/2” (50.8 mm x 50.8 mm to 88.9 mm x 88.9 mm) angle.Item #DescriptionWt. lb.Wt. kg.C10-159-0044' (1.22 m) Face for 2' (609.6 mm) Standoff34.1015.47C10-151-2012' (609.6 mm) Welded Standoff with 1.9" OD (48.26 mm) MountingPipe31.6414.35C10-151-2023' (914.4 mm) Welded Standoff with 1.9" OD (48.26 mm) MountingPipe47.9021.72C10-151-2034' (1.22 m) Welded Standoff with 1.9" OD (48.26 mm) Mounting Pipe54.7024.81C10-151-2045' (1.52 m) Welded Standoff with 1.9" OD (48.26 mm) Mounting Pipe61.6027.94C10-151-2056' (1.83 m) Welded Standoff with 1.9" OD (48.26 mm) Mounting Pipe68.7031.16Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us11

Tower ComponentsRosenberger Site Solutions3’ Sidearm Assembly for 1200 TLWD and 1800 TLWD & SRWDFor use in mounting a single antenna 3’ (914.4 mm) from the tower leg. Sidearm and hardwarefor attachment to tower face and 2-3/8” OD x 4’ (60.33 mm x 1.22 m) mounting pipe. Mountingpipe included where noted.Item #DescriptionWt. lb.Wt. kg.C30-904-1613' (914.4 mm) Sidearm Assembly with 2-3/8" OD x 4'(60.33 mm x 1.22 m) Mounting Pipe61.5027.90C30-904-1623' (914.4 mm) Sidearm Assembly46.3020.966’ Sidearm Assembly for 1800 TLWD & SRWDFor use in mounting a single antenna 6’ (1.83 m) from the tower leg. Sidearm and hardware forattachment to tower face and 2-3/8” OD x 4’ (60.33 mm x 1.22 m) mounting pipe. Mounting pipeincluded where noted.Item #DescriptionWt. lb.Wt. kg.C30-904-2816' (1.83 m) Sidearm Assembly with 2-3/8" OD x 4'(60.33 mm x 1.22 m) Mounting Pipe111.8050.71C30-904-2826' (1.83 m) Sidearm Assembly96.6043.82Dish Mount Assembly for 1200 TLWD and 1800 TLWD & SRWDFor use in mounting small dish type antennas. Dish mount and hardware for attachment totower face and 2-3/8” OD x 5’ (60.33 mm x 1.52 m) mounting pipe. Mounting pipe includedwhere noted.Item #DescriptionWt. lb.Wt. kg.C30-904-248Dish Mount Assembly with 2-3/8" OD x 5' (60.33 mmx 1.52 m) Mounting Pipe80.7036.60C30-904-249Dish Mount Assembly with 4-1/2" OD x 5' (114.3 mm x 117.801.52 m) Mounting Pipe53.43C30-904-250Dish Mount Assembly. Antenna Mast Pipe 2-3/8” minto 4-1/2” sold separately. See page 18 for pipes.27.9961.70Stand-Off BracketsStand-Off Brackets provide reliability and are just right for wireless omni antennas.A wide range of stand-off distances are offered in order to fit multiple applications.The hot-dipped galvanized steel is suitable for extreme environmental conditions. Allbrackets come with hardware for round members up to 3-1/2” ODItem #DescriptionQtyD1870024”, 1.90” OD x 24” Antenna Mounting PipeEachD1870136”, 1.90” OD x 32” Antenna Mounting PipeEachD1870248”, 1.90” OD x 32” Antenna Mounting PipeEachD18702B72”, 1.90” OD x 32” Antenna Mounting PipeEach1.90” ODx 24”Camera Mounts for 1800 TLWD & SRWDAllows a variety of methods for attaching cameras to towers. Mounting hardware included.Item #DescriptionWt. lb. Wt. kg.C10-005-001 For angle or round leg towers. Allows for taper adjustment. Fits round34.10legs from 1-1/4” to 5-9/16” OD (31.75 mm to 141.29 mm). Fits angle legsfrom 2” to 4” (50.8 mm to 101.6 mm)15.47C10-005-002 For straight leg round member towers. Fits 1-1/4" to 5-9/16" OD (31.75mm to 141.29 mm)31.6414.35C10-005-003 A platform style of mount allowing the camera to stand away from the47.90tower. Fits 18” (457.2 mm) face width towers with 1-1/4” (31.75 mm) legs21.72C10-005-004 4' (1.22 m) Welded Standoff with 1.9" OD (48.26 mm) Mounting Pipe24.811254.70Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us

Rosenberger Site SolutionsTower ComponentsSeperation Kit shownon monopole(collar sold separately)Typical Tapered Tower Section and2’ Separation Kit ShownAntenna Separation Kits2’, 3’ and 4’ (609.6 mm, 914.4 mm and 1.22 m) Separation Kits with 1’ (304.8 mm) Standoff for six mounting pipes for towers and poles.For use with 2-3/8”, 2-7/8” or 3-1/2” OD (60.33 mm, 73.03 mm or 88.9 mm) mounting pipes. (Purchase Pipes separately on page 18.)Each Separation Kit includes three (3) standoffs for attachment to monopole, straight tower section, or tapered tower section. Chooseappropriate mount from application list below.Item #DescriptionWt. lb.Wt. kg.C10-114-2002' (609.6 mm) Separation Kit for Monopole198.0089.81C10-114-3003' (914.4 mm) Separation Kit for Monopole258.00117.03C10-114-4004' (1.22 m) Separation Kit for Monopole334.00151.50Monopole ApplicationsAllows for attachment of Antenna Separation Kits to monopoles.Item #DescriptionWt. lb.Wt. kg.C10-112-30010" - 40" (254 mm - 1.02 m) diameter Tri-Collar172.0078.02C10-112-30112" - 60" (304.8 mm - 1.52 m) diameter Tri-Collar336.00152.41Straight Tower ApplicationsKit includes (1) one set of attachment brackets per leg interfaces to straight tower members from 1-1/2” OD thru 5-9/16” OD (38.10mm to 141.287 mm). For a complete kit 3 required.Item #DescriptionWt. lb.Wt. kg.C10-114-000Universal Saddle Clamp For Round Members 1-1/2” to 5-9/16”16.107.30Tapered/Straight Tower ApplicationsKit includes (1) one set of attachment brackets per leg interfaces to straight tower members from 1-1/2” OD thru 8-5/8” OD (38.10 mmto 219.075 mm). For a complete kit 3 required.Item #DescriptionWt. lb.Wt. kg.C10-114-999Standoff Arm Tower Mounting Kit, 1-1/2” to 8-5/8” OD Round Leg and Up to 6” x6” Angle Legs4721.32Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us13

Rosenberger Site SolutionsTower ComponentsINTRODUCINGNew RRU Mount KitsRRU Mount KitsRosenberger RRU Mounts interface to tower legs from: 1/2” to 5” OD60deg angle 1”to 5”90deg angle 1” to 3.5”Single RRU Mount KitD213RRUDouble RRU Mount KitD215RRUItem #DescriptionWt. lb. Wt. kg.D213RRUUniversal Single RRU mount. Fits Round Legs: 1/2” OD to 5” OD 60 Deg Angle Legs: 1” to 5” 90 Deg Angle Legs: 1” to 3.5”24.1610.95D215RRUUniversal Double RRU mount. Fits Round Legs: 1/2” OD to 5” OD 60 Deg Angle Legs: 1” to 5” 90 Deg Angle Legs: 1” to 3.5”34.0015.42INTRODUCINGNew Dual Swivel MountItem #DescriptionWt. lb. Wt. kg.D218RRUDSMDual Swivel (Swing) MountStandard leg accomodations 2.38” to 4.50”Round and 3.0” x 3.0” Angle.Easy conversion to accommodate smallerdiameter legs if required.18.33148.31Rosenberger Site Solutions, LLC. Call (337)598-5250 Fax (337)598-5290 Email: rlss@rlss.us Visit: www.RLSS.us

Tower ComponentsRosenberger Site SolutionsDesign SpecificationsMeets the latest revision of ANSI/TIA-222 Codes(15) 8’ x 1’ (2.44 m x 304.8 mm) Panels at 200’ (60.96 m)With 120 mph (193.12 kph) Basic Wind SpeedDead Load 1000 lbs (453.59 kg)Live Load 500 lbs (226.8 kg)Handrail Kit for Platform ShownLow Profile Platform KitThis unique design allows for one Platform Kit to be used as one of two face widths: 10’ or 12’ (3.05 m or 3.66 m). The pre-weldedcorners allow for easy colocation, and expanded metal grating provides a safe and solid working deck. Includes enough mountinghardware for twelve (12) 2-3/8” OD (60.33 mm) antenna pipes. Purchase appropriate Tri-Collar Bracket, pipes, optional Handrail Kitsand additional walkways separately.Item #DescriptionC10-851-00110' or 12' (3.05 m or 3.66 m) Low Profile PlatformWt. lb.Wt. kg.813.00368.77Wt. lb.Wt. kg.Tri-Collar BracketsItem #DescriptionC10-112-30010" - 40" (254 mm - 1.02 m) Tri-Collar Bracket172.0078.02C10-112-30112" - 60" (304.8 mm - 1.52 m) Tri-Collar Bracket336.00152.41Item #DescriptionWt. lb.Wt. kg.C10-116-81210' (3.05 m) Handrail Kit (3 vertical pipes included)228.00103.42Handrail Kits for PlatformC10-116-81312' (3.66 m) Handrail Kit (3 vertical pipes included)245.00111.13C10-116-81414' (4.27 m) Handrail Kit (3 vertical pipes included)262.00118.84Antenna Mounting PipesItem #DescriptionWt. lb.Wt. kg.C10-981-2232-3/8" OD x 5' (60.33 mm x 1.52 m) Long Mounting Pipe16.107.30C10-981-2062-3/8" OD x 6' (60.33 mm x 1.83 m) Long Mounting Pipe19.308.75C10-981-2072-3/8" OD x 7' (60.33 mm x 2.13 m) Long Mounting Pi

Rohn 25G Guyed Tower 44 Rohn 45G Guyed Tower 46 Rohn 55G Guyed Tower 48 Rohn SSV Towers 49 Sabre 1200 TLWD Guyed Tower 50 Sabre 1800 TLWD Guyed Tower 52 Sabre 1800 SRWD Guyed Tower 54 Sabre Series UL Self-Supporting Tower 55 Sabre Series VL Self-Supporting Tower 55 Lightweight Towe

Related Documents:

Cooling Tower Marley MD Cooling Tower Marley NC alpha SPLASH-FILL COOLING TOWER Marley MD 5000 COUNTERFLOW COOLING TOWER Marley AV Cooling Tower Marley AV CROSSFLOW COOLING TOWER ADDITIONAL NC COOLING TOWER PuBLICATIONS For further information about the NC Cooling Tower – including eng

EZ Tower Owner's Manual Document: 3-CMLT-1027-01 Revision: A. 4 EZ Tower TM Owner's Manual, Rev A IMPORTANT SAFETY INSTRUCTIONS READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE INSTALLING YOUR TOWER. 1) . DO NOT climb the tower. Tower climbing is very dangerous. 7)Locate the tower mounting mast well away from occupied buildings .

UPS Types Sizing / Selection Guide Endeavor 5-10kVA Rack / Tower UPS Endeavor 6 and 10kVA Rack / Tower UPS Endeavor LCD 1-3kVA Rack / Tower UPS Encompass 1-3kVA Rack / Tower UPS Options PRO-RT 750-2000VA Rack / Tower UPS EXR 750-3000VA UPS Series Rack / Tower UPS Entrust LCD 550-1500VA Tower UPS Series Enspire 350-900VA UPS Series

Marley aquatower Cooling tower Marley AV CROSSFLOW COOLING TOWER Marley Aquatower CROSSFLOW COOLING TOWER aNDDitiO aL NC COOLiNG tOWEr PUbLiCatiONS For further information about the NC cooling tower – includ

10 My 25 11 June 4 Tover Tower Tower Air Tower Tower Tower Air Tower 2WMl (hm Air--viii-i Firjne Area Frenchman Flat FrenchmanFlat Frenchman Flat Frenchman Flat Frenchman Flat Yucca Flat Yucca Flat Yucca Flat Yucca Flat Yucca Flat Yucca Flat Yucca Flat Frenchman Flat Yucca Flat Yucca Flat Y

2. Secure Cam Bolt into locations at bottom of tower sides. 3. Insert Cam Lock into Tower Bottom locations for each side. 4. Secure Tower Sides and Tower Bottom together by turning cam locks clockwise to tighten. 5. Insert Barrel Nut into locations at top of tower sides. 6.

OTHER BOOKS BY THE SAME AUTHOR Amazing True Stories of Execution Blunders A Beefeater's Grisly Guide to the Tower of London, Hendon, 2003 Ghosts of the Tower of London, Hendon, 1989 Great Escapes from the Tower of London, Hendon, 1998 Beefeaters of the Tower of London, Hendon, 1985 Tortures of the Tower of London, David & Charles, 1986 The Tower of London As It Was, Hendon, 1988

ED-OIG/A02-D0023 . Honorable César Rey-Hernández Secretary of Education Puerto Rico Department of Education Calle Teniente González, Esq. Calle Calaf – 12. th. Floor Urb. Tres Monjitas Hato Rey, Puerto Rico 00919 Dear Secretary Rey-Hernández: This is our Final Audit Report entitled . Puerto Rico Department of Education’s (PRDE) Salaries for the Period July 1, 1999 to June 30, 2003. The .