INDUSTRIAL & HVAC EQUIPMENT

INDUSTRIAL& HVACEQUIPMENT1

AboutOur reputation for innovation reaches back to 1978. We have since grown to become aninternational leader that designs, manufactures, and distributes a diverse range of quality,technologically advanced, innovative products on a global scale. Our expertise revolvesaround gas based tools & applications.Bromic started as an Australian supplier but now has offices around the world and isnow Ambro Controls, based in Los Angeles for US supply. Product design and qualityare specifically engineered for professional environments so that contractors can rely onBromic to get their job done.ContentsProductsOur Innovative Brazing Solution3Ultra Portable & Lightweight Gas Cylinders4Gas Regulators5-6Nitrogen Purge Kits27LOXEAL Thread Sealant8-9Test Equipment10Warranties & Extras11AMBROCONTROLS.COMTEL USA: 858 779 0377EMAIL AMBRO@BROMIC.COM

OurInnovativeBrazing SolutionButanePoductsOxyset Mobile Brazing & Soldering SystemPart No. 1811168NEWThe Oxyset is a lightweight, portable brazing systemthat uses disposable gas cylinders. Complete with aneasy-carry cylinder stand, the Oxyset isideal for highly-mobile contractors or for workingin hard-to-reach areas. A mixture between Oxygenand Map-ProTM is ideal in many applications dueto its adjustable heat output, this kit is suitable fora variety of applications including: welding, brazing,soldering and heating.KIT INCLUDES TRADE SPECIFICATION MAP-Pro regulator with flow gauge Oxygen regulator with content &pressure out gauge 2 x Check valves for torch end 10 ft twin hose assembly Welding torch 2 nozzles Spanner and flint sparker Portable, lightweight & compactcylinder rack Cylinders not includedFRONTCode 1811168OXYSEOXYSETMOBILEBRAZING SYSTEMMOBILE BRAZING SYSTDESIGNED FOR HVDESIGNED FOR HVAC CONTRACTORSCOMPACT, PORTAIDEAL FOR SOLDECOMPACT, PORTABLE & LIGHTWEIGHTIDEAL FOR SOLDERING AND BRAZINGOXYGENThis kit does not include Oxygen or Map-Pro cylinders.ApplicationSOLD SEPARATELY / SPANISH SEPARATELYMap-ProTM & Oxygen CylindersSilver soldering, brazingand heatingCheck ValvesCast Aluminum torch handle withbuilt in gas and oxygen controlsNET WEIGHT 113 oz (3.2 kg)INSIDE THE BOXAMBROCONTROLS.COMQUICK. EASY.CONNECTED.Cylinders must be purchased separately. The image is forillustration purposes only.Trade quality brass regulators with flow controls Oxygen regulatorwith contents andflow gauge Map//ProTMregulator withflow gaugeTwo nozzles includedfor various applications Size 3 & Size 5Chec valvesincludedwith kitMap-Proand mic.com/plumbingbromic.c3TEL USA: 858 779 0377EMAIL AMBRO@BROMIC.COM

Ultra Portable & LightweightGas CylindersOxygen CylinderPart No. 1811323M12 x 1 thread connectionWorking pressure: 1595 PSIHigh pressure disposablecylinder means more gasNEWMade in ItalyCompact portable and LightweightSuited for Bromic Oxyset 1811168Innovative3.7 ft3 of OxygenFuel OptionApplicationHeavy duty, hightemperature applications2.2L Nitrogen Gas CylinderPart No. 1811527M10 x 1 thread connectionWorking pressure: 1595 PSINEWHigh pressure disposable cylindermeans more gasMade in Italy100% Nitrogen8.5 ft3 of NitrogenApplication4Wine dispensing, refrigeration,laboratories and air conditioningAMBROCONTROLS.COMTEL USA: 858 779 0377EMAIL AMBRO@BROMIC.COM

Gas RegulatorsLow Pressure (LP) Nitrogen RegulatorPart No. 1812111Forged brass body for trade durabilitySintered metal inlet filter to trap impuritiesNo soldered joints for easy maintenanceFactory set maximum delivery pressureDurable and precise pressure gaugesDesigned for purging of systemsSPECIFICATIONS Max inlet pressure: 4350 PSI Max outlet pressure: 145 PSI Thread inlet: Type 10 – 5/8” BSP RH ext Thread outlet: 5/8” 18 UNF RH ext Single stage regulatorApplicationPurging of systems HVACHigh Pressure (HP) Nitrogen RegulatorPart No. 1812110Forged brass body for trade durabilitySintered metal inlet filter to trap impuritiesNo soldered joints for easy maintenanceFactory set maximum delivery pressureDurable and precise pressure gaugesDesigned for purging of systemsSPECIFICATIONS Max inlet pressure: 4351 PSI Max outlet pressure: 870 PSI Thread inlet: Type 50with 3.74” stemApplication Thread outlet: SAE 1/4” FlarePurging of systems HVAC Single stage regulatorAMBROCONTROLS.COMTEL USA: 858 779 03775EMAIL AMBRO@BROMIC.COM

Gas RegulatorsNitrogen Regulator with flow gaugePart No. 1811530M10 x 1 inletFlow gauge for precise controlHose barb includedDesigned forAmbro Controls disposable inertgas cylinders (Nitrogen)Natural Gas RegulatorsPart No. 6160786 & 6160787Natural Gas Regulators - 1/2" or 3/4" NPTThese Natural Gas regulators offer reliableperformance with a maximum inletpressure of 0.5 psi. Suitable for domestickitchen appliances.Part No. 6160786ConnectionCapacityPart No.66160786Natural Gas6160787Natural GasPart No. 6160787SpecificationsINLETOUTLETBTUMax. InletPressureAdjustableOutlet Pressure1/2" NPT1/2" NPT2500000.5 PSI3” to 6”maximum3/4" NPT3/4" NPT2500000.5 PSI3” to 6”maximumAMBROCONTROLS.COMTEL USA: 858 779 0377EMAIL AMBRO@BROMIC.COM

Nitrogen Purge KitsNitrogen Purge Kit with 43.5 PSI Regulator, Hose and Brass AdaptorsPart No. 1812112This purge tool allows for a quick and easy positiveseal for many different pipe dimensions. Whenrepairing refrigeration / air conditioning piping,the internal area of the pipe should be purged withnitrogen to prevent oxidation around the internaljoint during the brazing process. A positive seal forthe nitrogen purge process reduces the amountof gas used and limits any ingress of air during therepair.KIT INCLUDESNitrogen 43.5 PSI regulator (part 1812111)Brass purging adaptors 0.19” - 0.78” pipe sizes 0.78” - 1.14” pipe sizesApplicationGas hose - 9’ 10”Purging of systems HVACNitrogen Purge Kit with Hose & Brass AdaptorsPart No. 1812113The nitrogen purge tool allows for a quick and easy positiveseal for many different pipe dimensions. When repairingrefrigeration / air conditioning piping, the internal areaof the pipe should be purged with nitrogen to preventoxidation around the internal joint during the brazingprocess. A positive seal for the nitrogen purge processreduces the amount of gas used and limits any ingress of airduring the repair.7KIT INCLUDESBrass purging adaptors 0.19” - 0.78” pipe sizes 0.78” - 1.14” pipe sizesApplicationGas hose - 9’ 10”Purging of systems HVACAMBROCONTROLS.COMTEL USA: 858 779 0377EMAIL AMBRO@BROMIC.COM

LOXEAL Thread SealantLOXEAL 58-11 High Pressure Thread SealantPart No. 7170583High viscosity – once oxygen is expelledfrom sealant it will activate and start to cureDrip proofGAS & WATERSealing unaffected by shock/vibrationAPPROVEDRapid cure time – functional in lessthan 3 hoursSafe for use with potable water& gasRETAIL DISPLAY BOXOF 10x3.38oz TUBESNot suitable for use on plasticsMade in ItalyNon-toxic71705833.38oz TUBECOMPLIANTSpecificationsLOXEAL 58-11*Curing PropertiesLOXEAL 58-11*Part No. 7170583Single 3.38oz tubeHandling Cure Time15 to 30 minutesColorYellowFunctional Cure Time1 to 3 hoursFull Cure Time3 to 6 hoursShear Strength6 to 12 N/mm2Locking Torque Breakaway Prevailing6 to 10 N/mm22 to 4 N/mm2Elongation at BreakMore than 100%Viscosity @ 77 F (mPa-s)24,000 - 70,000(high thixotropy)Density @ 77 F - (g/ml)1.05Max Diameter of Thread / GapFilling AbilityM 80 / 3 / 0.50mmFlash Point 212 FSolvent ContentNoneShelf Life @ 73 F2 yearsTemperature Range-58 F to 302 FSize Available1.69 oz, 3.38 oz and 8.4 oz tubeShelf Display Box10x1.69 oz 10x3.38 oz, 10x8.4 oz*As tested on Bolt M 10x20 – quality 8.8. – Nut h – 0.8dApproved to 2000 kPaApplicationSealing metal threaded joints8AMBROCONTROLS.COMTEL USA: 858 779 0377EMAIL AMBRO@BROMIC.COM

LOXEAL Thread SealantLOXEAL 18-10 Medium Pressure Thread SealantPart No. 7170183Rapid cure time and easy applicationHigh viscosity – once oxygen is expelledfrom sealant it will activate and start to cureSealing unaffected by shock/vibrationGAS & WATERAPPROVEDSuitable for gasNot suitable for use on plasticsMade in ItalyRETAIL DISPLAY BOXOF 10x3.38oz TUBESNon-toxic71701833.38oz TUBECuring PropertiesCOMPLIANTSpecificationsLOXEAL 18-10Part No. 7170183Single 3.38oz tubeCompositionAnaerobic Methacrylateand P.T.F.E.ColorYellowViscosity @ 77 F (mPa-s) 45,000 (Thixotropic)Density @ 77 F (g/ml)1.0Flash PointApproximately 212 FSolvent ContentNoneShelf Life @ 73 F2 yearsMax Diameter of Thread / GapFilling AbilityM 80 / 0.30mmTemperature Range50 F to 302 FSize Available3.38 oz and 8.4 oz tubeShelf Display Box10x 3.38 oz, 10x 8.4 ozAMBROCONTROLS.COMTEL USA: 858 779 0377LOXEAL 18-10*Handling Cure Time20 to 40 minutesFunctional Cure Time1 to 3 hoursFull Cure Time5 to 10 hoursShear Strength4 to 6 N/mm2Locking Torque Breakaway Prevailing1.5 to 2.5 N/mm21.0 to 1.5 N/mm2Elongation at BreakMore than 100%*Approved to 500 kPaApplicationSealing metal threaded joints9EMAIL AMBRO@BROMIC.COM

Test EquipmentDigital Manometer KitPart No. 8688951Record functionData holdLarge dual LCD with backlightMax/min/avg valueLow battery indicationAuto power off11 different units of measureDisplayAccuracyRepeatabilityLinearity/ HysteresisMaximum PressurePressure RangeDual LCD 0.3% FSO (77 F) 0.2% 0.29% FSO20 psi (137 kPa) 34.47 kPaLow BatteryIndicatorOver Range IndicatorUnder RangeindicatorOperating ConditionPower SupplyYESErr.1Err.232 F to 122 F1x 9VSteel Test BucketPart No. 8688100For pressure-testing water systemsare sealed and free from leaksReliable and accurate test resultsCurrent pressure is shown on gaugefor easy identification in case of lossof pressureKit includes 4” long hose and4 spare washers for the hosePart No.Testing RangeTank CapacityConnections86881000-60 bar (860psi,6Mpa)3.4 gallons1/2” BSPValve MaterialTank MaterialHandlePressure RangeHoseBrass304Stainless SteelSolid SteelShows MPA, PSI & barscale; Range 0-60 bar(0-860psi)4’11” length highpressure hose10AMBROCONTROLS.COMTEL USA: 858 779 0377EMAIL AMBRO@BROMIC.COM

Warranties & ExtrasAll Ambro Controls products are manufactured to the highestquality standard and come with guarantees against anymaterial or workmanship defects. For specific warranty detailson any product, including warranty duration, please referto the product instructions. Alternatively, contact oneof our helpful customer service staff or visitwww.bromic.com/industrial for more information.IMAGES, SPECIFICATIONSDue to the nature of the printing process, colors shownin this catalogue may differ from the actual color ofproducts. All images, drawings, graphics and designelements contained in this catalogue are subject toInternational copyright law. No part of this cataloguemay be reproduced, copied or stored in part or wholewithout the prior written permission. Product detailsin this guide are indicative only and may changewithout notice, Bromic reserves the right to changespecifications and any other information contained inthis catalogue with no recourse from customers.ORDERINGOrders can be placed by fax, online or email.Our catalogue includes Part No. to ensure easeof use, with the customer in mind.11AMBROCONTROLS.COMTEL USA: 858 779 0377EMAIL AMBRO@BROMIC.COM

USA18 Technology Drive STE 143Irvine California 92618 USATel: 858 779 0377ambro@bromic.comAMBROCONTROLS.COMAustralia10 Phiney PlaceIngleburn NSW 2565Sydney AUSTRALIATel: 61 2 9426 522221/9/2020

nitrogen to prevent oxidation around the internal joint during the brazing process. A positive seal for the nitrogen purge process reduces the amount of gas used and limits any ingress of air during the repair. Nitrogen Purge Kit with Hose & Brass Adaptors KIT INCLUDES Nitrogen