OSHPD Pre-Approval Package #OPA-0628 - Lowell
Seismic Summary and Installation Detailsfor OSHPD Fixed Equipment Anchorage22”D Series L275-S27”D Series L277-S32”D Series L278-S36”D Series L279-SOPA-0628pg 1 of 14Printed in U.S.A. 10-14-0522”D Series L265-S27”D Series L267-S32”D Series L268-S22”D Series L260-S27”D Series L262-SLowell Manufacturing Company 100 Integram Drive Pacific, Missouri 63069 U.S.A.Call 800.325.9660, 636.257.3400 Fax 636.257.6606 Click www.lowellmfg.comLowell makes every effort to provide accurate information and reserves the right to change specifications and/or improve manufacturing methods.OSHPDCalifornia Office of Statewide Health Planning and DevelopmentCalifornia Office of Statewide Health, Planning and DevelopmentOSHPD Pre-Approval Package #OPA-0628
Seismic Summary and Installation Detailsfor OSHPD Fixed Equipment ents.P.E.Certifieddocuments.IMPORTANT! Prior to rack/cabinet installationConfirm the code to which your installation must comply - UBC, IBC, CBC or OSHPD anchorage (Ip 1.0 or 1.5)or IBC Anchorage and Cabinet for Essential Facilities (Ip 1.5).This manual specifically addresses the code compliance requirements of OSHPD for Lowell Manufacturing Company’s seismicrated racks and vertical cabinets with (-S) suffix. (Contact Lowell ifa different manual that address UBC, IBC, CBC seismic anchorage or IBCAnchorage and Cabinet codes for Essential Facilites is needed).Lowell -S cabinets outlined herein are pre-approved by theCalifornia Office of Statewide Health Planning & Development foruse in anchorages for fixed hospital equipment. Models shownare UL Listed welded assemblies fabricated with premium USsteel. They include extra base brackets welded in position andthis complete set of P.E. Certified documents. For productdimensions, technical details and accessories, refer to individualspecification sheets available on line at www.lowellmfg.com.Note: seismic models will not accept optional mobile or stationary base. Other features and optional accessories are constant!Depth22”D27”D32”D36”DGanging RacksCabinets (Adj. Rails)Cabinets (Fixed Rails)L275-77S, L275-70-S, L275-61-SL265-77-S, L265-70-S, L265-61-S, L265-42-S, L265-36-S L260-77-S, L260-70-S, L260-61-S, L260-42-S, L260-36-SL277-77--S, L277-70-S, L277-61-S, L277-42-S L267-77-S, L267-70-S, L267-61-S, L267-42-S, L267-36-S L262-77-S, L262-70-S, L262-61-S, L262-42-S, L262-36-SL278-77-S, L278-70-S, L278-61-SL268-77-S, L268-70-S, L268-61-SL279-77-S, L279-70-S, L279-61-SLowell Seismic racks and cabinets (-S Suffix) include welded base brackets and P.E. certified anchorage installation documents that are code specific to: UBC, IBC, CBC or OSHPD.Lowell base details for seismic (-S) racks and cabinetsAll Lowell seismic (-S) racks and cabinets meet or exceed the seismic design requirements for Anchorage with an Importance Factorof 1.0 or 1.5 and spectral acceleration up to 3.0g’s as specified bythe 2003 International Building Code, 1997 Uniform Building Codeand 2001 California Building Code, if anchored in accordance withthe P.E. Certified Seismic Summary and Anchorage InstallationDetails Manual-UBC/IBC/CBC*. The same (-S) racks and cabinetsalso meet the requirements for California’s Office of StatewideHealth Planning and Development, if anchored in accordance withthe P.E. Certified Seismic Summary and Installation Details forOSHPD fixed Equipment Anchorage Manual OPA-0628*Some models are additionally qualified to meet more stringentSeismic Anchorage AND Cabinet structure qualifications as established by the IBC for Essential Facilities with an Importance factor of1.5, if anchored and installed in accordance with the IBC SeismicEssential Facility Qualification Summary - Cabinet and AnchorageInstallation Manual*.All seismic racks and cabinets ship with welded brackets in eachcorner of the base (see diagram). Each bracket includes a hole foranchor installation (anchors by others). Anchor size, type, embedment, spacing, and edge distance requirements are based on theresults of the seismic calculations and limits established by eachindustry code and are detailed in the manuals referenced above.All Seismic racks feature Lowell’s one-piece ‘X-style’ side frame toachieve extra rigidity for withstanding earthquake ground motion.Seismic (-S) racks arereinforced with X-styleone-piece side constructionfor extra rigidity.OPA-0628pg 2 of 14*All three P.E. Certified seismic manuals were developed byan outside structural engineering/consulting firm. The appropriate manual, as specified on cabinet order, ships with each-S rack/cabinet. Advance copies are available to authorizedLowell dealers, architects and consultants upon request.Lowell Manufacturing Company 100 Integram Drive Pacific, Missouri 63069 U.S.A.Call 800.325.9660, 636.257.3400 Fax 636.257.6606 Click www.lowellmfg.comLowell makes every effort to provide accurate information and reserves the right to change specifications and/or improve manufacturing methods.
OSHPD Pre-Approval Package #OPA-0628 California Office of Statewide Health Planning and Development 22”D Series L275-S 22”D Series L265-S 22”D Series L260-S 27”D Series L277-S 27”D Series L267-S 27”D Series L262-S 32”D Series L278-S 32”D Series L268-S 36”D Series L279-S OSHPD
LO4-160 Specifying Guidelines Seismic Anchorage for Free Standing, Floor Anchored Shelving OSHPD Pre-Approval OPA-0556 NOTE: OPA-0556 is valid for the 2001 and 2007 California Building Codes (CBC) which governed new building projects in the state of Californ
1. opa-0300 tolco seismic restraint system. 2. opa-0349 mason seismic restraint guidelines for mechanical systems and plumbing systems. opa-0114 b-line seismic restraint system. 3. opa-0125 nusig seis
of Statewide Health Planning and Development (OSHPD) under their pre-approval program for seismic restraint systems. Only those systems listing a current “07” OSHPD number (i.e. OPA-0300-07) are acceptable. 6
compliance. OSHPD, being the AHJ (authority having jurisdiction), for hospitals in California, quickly commenced a pre-approval program for an OSHPD Special Seismic Certification which assigns a pre-approval “OSP” number for the nonstructural building equipment that is tested and accepted by
OSHPD certification is based on requirements from the CBC and ASCE 7-10. Depending on the type of product, an OSHPD Special Seismic Certification Preapproval of Manufacturer’s Certification (OPM), or OSHPD Special Seismic Certification Pre
Special Seismic Certification [OSHPD 1R, 2, 5] 1705.13.3.1 Special seismic certification. [OSHPD 1R, 2 and OSHPD 5] Required for: 1. Life-safety components, such as emergency and standby power systems, mechanical smoke removal systems, and fire sprinkler/fire protection systems. 2. Medical, mechanical and electrical equipment and
OFFICE USE ONLY OSHPD APPROVAL VALID FOR CBC 2016 & ALL PRE-2016 CODE BASED PROJECTS Signature: Date: 08-14-2017 Print Name: Jeffrey Kikumoto Title: SSE Condition of Approval (if applicable): a m n e i d t tt h e b / o o y r t an h E it E n e S t x th p d y the C A e the C C the C
weekend, your pet will be kept at the airport due to customs duty hours. If possible pets should arrive during weekday/daytime hours to prevent unnecessary stress for the pet or owner. Commercial Airline Transport . If flying commercially, contact the airline prior to purchasing tickets to ensure pets will actually be able to fly on the day of travel (e.g. ask about the airline’s regulations .
