Industrial Hydraulic Valves Catalog HY14-2502/US - Parker
Directional Control ValvesSeries D3WCatalog HY14-2502/USTechnical InformationGeneral DescriptionThe D3W Series directional control valves arehigh-performance, 4-chamber, direct operated, wetarmature, solenoid controlled 3 or 4-way valves. Theyare available in 2 or 3-position and conform to NFPA’sD05/CETOP 5 mounting patterns.ABBAPTFeatures Worldwide, high flow, low pressure drop design. Three electrical connection options.Mechanically tunable soft shift.22 spools available including proportional.Repairable manual override for easy seal replacement.DC surge suppression available to protect electricalequipment.AC & DC lights available.Easy access mounting bolts.SpecificationsExplosion proof availability.CSA approved.InterfaceNFPA D05, CETOP 5, NG 10No tools required for coil removal.Max. OperatingPressureP, A, B:345 Bar (5000 PSI) StandardRectified coils available for high flow AC applications.CSA207 Bar (3000 PSI)Tank:103 Bar (1500 PSI) StandardResponse Time (ms)Signal to 95% spool stroke measured at172 Bar (2500 PSI) and 75 LPM (20 GPM)CSASolenoid TypePull-InDrop-OutACDC211103585CSA File Number103 Bar (1500 PSI)LR060407Producción CNC, SA de CVAv. Pie de la Cuesta No. 1440Local 2 Col. Amalia SolorzanoQuerétaro, Qro. CP 76130Tel. (442) 253 7834Fax. (442) 253 7997www.parkercnc.com.mx2502-A2.p65, ddA51Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USAA
Directional Control ValvesSeries D3WCatalog HY14-2502/USOrdering InformationAD3WDirectionalControl ValveBasic KJD#Z#NFPA D05CETOP 5NG 10Wet armaturesolenoidDescription24/60 - 24/50 VAC120/60 - 110/50 VAC240/60 - 220/50 VAC12 VDC24 VDC120 VDC250 VDC# High Watt Coil AB2CodeNVE153164DescriptionNitrileFluorocarbonEPR* Contact HVD for *†PADescriptionSingle solenoid, 2 position,spring offsetP to A and B to T in offset positionDouble solenoid, 3 position,spring centered.bPTAB11PTABPT81†††82†††Valve schematic symbols are per NFPA/ANSIstandards, providing flow P to A when energizingsolenoid A. Note operators reverse sides for #8 and#9 spools. See installation information for details.PTABPTPTaaDouble solenoid, 2 position, detentbAESingle solenoid, 2 position,spring centered.P to B and A to T when energized.PTbABFSingle solenoid, 2 position. Spring offset,energized to center. Position spool spacer on Aside. P to A and B to T in spring offset position.PTH*Single solenoid, 2 position,spring offset.P to B and A to T in offset position.KSingle solenoid, 2 position.Spring centered.A side. P to A and B to T when energized.PTABMSingle solenoid, 2 position, spring offset, energizedto center position. Spool spacer on B side. P to Band A to T in spring offset position.PT12* 8, 20 & 26 spools have closed crossover.** 9 & 30 spools have open crossover.† Available only with high-watt rectified AC coils orhigh-watt DC coils.†† Spring centered versions C, E, F, K & M only.BBD†30**10†AA* Only spools 20, 26 & 30.† Only spools 20 & 30.ABPTABBaaaThis condition varieswith spool code.2502-A2.p65, ddA52Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA
Directional Control ValvesSeries D3WCatalog HY14-2502/USOrdering InformationConnectorPackageCodeCKPWS*†#ESolenoid TubeOptions iptionConduit CavityConduit AdaptorHirschmann w/PlugHirschmann w/o PlugDouble SpadeExplosion ProofCodeOmit4*K#CoilHigh WattExplosion Proof, EExdLow WattExplosion Proof, UL/CSA* Available only with J, K, Y(Rectified) and T (Rectified) voltages.† Explosion proof coils are 60 Hz atstandard voltage; dual rating notavailable.VariationsDesignSeriesNOTE:Not requiredwhen ordering.DescriptionStandard ValveCSA ApprovalUL Recognition* Not available with highpressure tube option.# Contact HVD for availability.* Available only with J, K, Y(Rectified) and T (Rectified)voltages.† Not CSA approved.# DC voltage dicationCodeOmitS3S4S7I7DescriptionStandard ValveSoft Shift, 0.030" OrificeSoft Shift, 0.040" OrificeSoft Shift, 0.070" OrificeMonitor Switch** Single solenoid models only.Not CE or CSA approved.CodeOmitV#ZDescriptionNo OptionVaristor SurgeSuppressorAC Rectifiedwith MOV SurgeSuppressor# DC voltage only.CodeOmitHDescriptionLow PressureHigh PressureCodeOmitPRDescriptionStandard TubeExtended Manual OverrideRepairable Manual OverrideCodeOmit56756571A1B1C1DMounting Bolt KitsUNC Bolt Kits for use with D3WDirectional Control Valves & Manapak/CartpakNumber of Manapaks/Cartpaks@ 2.00" (50mm) thickness012D3WBK98BK141BK1421.62"3.50"5.50"D3W withBK144BK61BK62explosion proof2.37"4.25"6.25"coilsDescriptionStandard ValveSignal LightsManaplug, Brad Harrison MiniManaplug, Brad Harrison Micro (M12x1)Manaplug (Mini) with LightsManaplug (Micro) with Lights (M12x1)Manaplug (Mini) Single Sol. 5-PinManaplug (Micro) Single Sol. 5-Pin (M12x1)Manaplug (Mini) Single Sol. 5-Pin w/LightsManaplug (Micro) Single Sol. 5-Pin w/Lights (M12x1)Valve Weight:Single Solenoid:ACDCDouble Solenoid:ACDCStandard Bolt Kit:Metric Bolt Kit:3BK1437.50"BK638.25"4.3 kg (9.5 lbs.)5.3 kg (11.6 lbs.)5.0 kg (11.0 lbs.)7.3 kg (16.0 lbs.)BK98BKM98NOTE: All bolts are SAE grade 8, 1/4-20 UNC-2A thread, torque to16 Nm (12 ft-lbs)2502-A2.p65, ddA53Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USAA
Directional Control ValvesSeries D3WCatalog HY14-2502/USTechnical InformationSolenoid Ratings**AInsulationAllowable Deviationfrom rated voltageArmatureClass HDC, AC RectACWet pin typeD3W*****F Solenoid Electrical Characteristics‡-10% to 15%-5% to 5%** DC Solenoids available with optional molded metal oxide varistor(MOV) for surge suppression.Leadwire length 6” from coil face.NominalVolts/HzIn 89610132E24/6024/502903817711032K12 VDC—3.00†36J24 VDC—1.50†36D120 VDC—0.30†36NominalVolts/HzIn RushAmpsHoldingAmpsWattsKF12 VDC—3.0018JF24 VDC—0.7518‡ Based on nominal voltage @ 22 C (72 F)D3W Solenoid Electrical Characteristics†SolenoidCodeSolenoidCodeD3W Rectified AC Solenoid ElectricalCharacteristics‡Holding NominalVAWatts (Ref)SolenoidCodeNominalVolts/HzIn 50—.0918‡ Based on nominal voltage @ 22 C (72 F)† DC holding amps.Explosion Proof SolenoidsExplosion Proof Solenoid RatingsU.L. (EU)C.S.A.ATEXElectrical Characteristics* ED and EU†Class I, Div. 1 & 2, Groups C & DClass II, Div 1 & 2, Groups E, F & GAs defined by the N.E.CComplies with ATEX requirements for:Exd, Group IIB;EN50014: 1999 Amds 1 & 2,EN50018: 200SolenoidCodeNominalVolts/HzIn RushVAHolding NominalVAWatts (Ref)Y120/602668236T240/602668236K12 VDC—3.00†36J24 VDC—1.50†36D120 VDC—0.30†36* Dual frequency not available on explosion proof coils.† DC holding amps.2502-A2.p65, ddA54Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA
Directional Control ValvesSeries D3WCatalog HY14-2502/USDimensionsInch equivalents for millimeter dimensions are shown in (**)Hirschmann, Double AC SolenoidA107.7 (4.24)90.0 (3.54)89.8 (3.54)86.2 (3.40)69.5 (2.74)36.0 (1.42)21.5 (.85)12.0 (.47)74.5 (2.93)23.0 (.91)97.8 (3.85)58.0 (2.29)27.3 (1.08)76.2 (3.00)129.1 (5.09)152.5 (6.01)Hirschmann, Single AC Solenoid107.7 (4.24)90.0 (3.54)89.8 (3.54)86.2 (3.40)69.5 (2.74)SeeNote36.0 (1.42)21.5 (.85)12.0 (.47)74.5 (2.93)23.0 (.91)97.8 (3.85)58.0 (2.29)27.3 (1.08)76.2 (3.00)87.9 (3.45)Note: 30.0mm (1.18") from bottom of bolt counterbore.2502-A2.p65, ddA55Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA
Directional Control ValvesSeries D3WCatalog HY14-2502/USDimensionsInch equivalents for millimeter dimensions are shown in (**)AConduit Cavity, Double DC Solenoid90.0 (3.54)86.2 (3.40)69.5 (2.74)36.0 (1.42)12.0 (.47)21.5 (.85)23.0 (.91)122.5 (4.83)58.0 (2.29)27.3 (1.08)76.2 (3.00)177.2 (6.98)Conduit Cavity, Single DC Solenoid90.0 (3.54)86.2 (3.40)69.5 (2.74)36.0 (1.42)12.0 (.47)21.5 (.85)23.0 (.91)58.0 (2.29)122.5 (4.83)27.3 (1.08)76.2 (3.00)87.9 (3.46)2502-A2.p65, ddA56Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA
Directional Control ValvesSeries D3WCatalog HY14-2502/USDimensionsInch equivalents for millimeter dimensions are shown in (**)Conduit Box Extension, Double AC SolenoidAwith Variation 6 (Manaplug) & Variation P (Extended Manual Override)15.9 (.63)128.6 (5.07)103.1 (4.06)69.5 (2.74)36.0 (1.42)12.0 (.47)21.5 (.85)97.8 (3.85)112.2 (4.42)23.0 (.91)58.0 (2.29)27.3 (1.08)74.1 (2.92)76.2 (3.00)152.5 (6.01)166.9 (6.58)Conduit Box Extension, Double DC Solenoidwith Variation 6 (Manaplug) & Variation P (Extended Manual Override)15.9 (.63)128.6 (5.07)103.1 (4.06)69.5 (2.74)36.0 (1.42)12.0 (.47)21.5 (.85)23.0 (.91)140.4 (5.53)58.0 (2.29)27.3 (1.08)76.2 (3.00)195.0 (7.68)2502-A2.p65, ddA57Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA
Directional Control ValvesSeries D3WCatalog HY14-2502/USDimensionsInch equivalents for millimeter dimensions are shown in (**)AExplosion Proof U.L. & CSA, Double Solenoid#18 AWG, 18 Inches Long, No Terminals,with UL Approval and Markings1/2 Inch 18.9(0.74)11.7(0.46)18.9 (0.74) Ref.23.0(0.91)58.0(2.29)BoltholeCenterline12.0 Reference(0.47)23.0(0.91)63.6(2.51)143.7(5.66)11.3 (0.44)64.9 (2.56)Adapter PlateIncluded withValve76.9 (3.03)117.2 (4.62)197.3 (7.77)Explosion Proof ATEX, Double SolenoidM20 x 1.5-6H Metric 4.08)36.0(1.42)18.9(0.74)11.6(0.46)18.9 (0.74) neReference154.1(6.07)23.0(0.91)75.6 (2.98)11.3(0.44)64.9 (2.56)76.7 (3.02)207.7(8.18)2502-A2.p65, ddA58Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA
Directional Control ValvesSeries D3WCatalog HY14-2502/USDimensionsInch equivalents for millimeter dimensions are shown in (**)Conduit Box, Single DC SolenoidAwith Variation I7 (Monitor Switch)90.0 (3.54)86.2 (3.40)85.3 (3.36)69.5 (2.74)36.0 (1.42)12.0 (.47)21.5 (.85)23.0 (.91)58.0 (2.29)27.3 (1.08)76.2 (3.00)122.5 (4.83)176.2 (6.94)Monitor Switch(valve variation I7)Block DiagramThis feature provides for electrical confirmation of thespool shift. This can be used in safety circuits, toassure proper sequencing, etc.Pin 1(Input 24VDC)InductorPin 2(Output – Normally Open)RegulatorSwitch DataPin 3(Output – Normally Closed)Inductive switch requiring 18-42 volt input. Outputs Aand B are opposite; one at “0” voltage, the other atinput voltage. During switching, A and B outputsreverse. Provides 0.4A switching current.Pin 4(Ground Terminal)(Extended, or Energized Position)For repetitive switch power-up conditions, please consult factory.2502-A2.p65, ddA59Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA
Directional Control ValvesSeries D3WCatalog HY14-2502/USAccessoriesConduit BoxA(connection option K)Interface–152.4 cm (6.0 inch) lead wires, 18 awg.–NEMA 4 rating available (consult factory)–WaterproofManaplug(valve variations 6, 56, 1A, 1C)Interface–Brad Harrison Plug–3-Pin for Single Solenoid–5-Pin for Double Solenoid"B” Solenoid (Positive)Wire #1 (Red/White)GroundWire #1 (Green)Solenoid (Negative)Wire #3 (Red/Black)"B” Solenoid (Negative)Wire #5 (Red/Black)"A” Solenoid (Positive)Wire #4 (Red/Yellow)"A” Solenoid (Negative)Wire #2 (Red)Solenoid (Positive)Wire #2 (Red/White)3-Pin Manaplug (Mini) with LightsGroundWire #3 (Green)5-Pin Manaplug (Mini) with LightsSingle Solenoid ValvesSingle and Double Solenoid Valves("A" and "B" Solenoids Reversed for #8 and #9 Spools)Hirschmann Plug with LightsManplug - Micro Connector(valve variations 7, 57, 1B, 1D)Pin #3(Ground)Solenoid (Negative)Wire /3 (Blue)Solenoid (Positive)Wire /4 (Black)Pin #1(Positive)Pin #2(Negative)GroundWire /1 (Brown)"B" Solenoid (Negative)Wire /1 (Brown)"B" Solenoid (Positive)Wire /2 (White)GroundWire /5 (Gray)Face View of Plug"A" Solenoid (Positive)Wire /4 (Black)Conforms to DIN43650, ISO4400, Form A 3-Pin"A" Solenoid (Negative)Wire /3 (Blue)2502-A2.p65, ddA60Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA
Directional Control Valves 2502-A2.p65, dd A Catalog HY14-2502/US A51 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Interface NFPA D05, CETOP 5, NG 10 Max. Operating P, A, B: Pr
Filtration ISO 4406 (1999), 18/16/13 Series R4V and R6V (Pilot Operated) General Size NG10 NG25 NG32 . Parker Hannifin Corporation Catalog HY14-2500/US. Parker Hannifin Corporation Catalog HY14-2500/US. Parker Hannifin Corporation) Park
Catalog HY14-2502/US Directional Control Valves A 2502-A2.p65, dd A45 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Introduction Series D3 D3L Lever Operated † Spring return or dete
Catalog HY14-2550/US Proportional Directional Control Valves D1FB.indd, ddp A36 Parker Hannifin Corporation Hydr alv Division Elyr A A Specifications Series D*1FB General Design Pilot operated DC valve Actuation Proportional solenoid Size NG10 (CETOP 5) NG16 (CETOP 7) NG25 (CETOP 8) NG32 (CETOP 10)
4 Section Pages Argus Atomac Automax Deutsche Audco Durco McCANNA 3-Piece Ball Valves 6 - 9 One Piece Threaded Valves 9 Flanged Ball Valves 10 - 14 One-Piece Butt Weld Valves 15 Top Entry Valves 15 Butterfly Valves 16 Non-lubricated Plug Valves 17 - 19 Lined Valves and Accessories 20 - 24 Check Valves 25 Gate Valves 25 Rotary Contro
MANUAL VALVES PVC-U The PVC-U manual valves line consists of a comprehensive range of ball valves, butterfly valves, diaphragm valves, check valves, sediment strainers, air release valves, foot valves and angle seat valves for use in the construction of process and service lines fo
FC & FL valves, WKM type valves, Shaffer type valves, Flocon type valves, check valves, cup testers, pulsation dampeners: www.mcmoiltools.com o’Drill / mCm Centrifugal pumps, cyclone pump, skid packages, gate valves, shear relief valves, reset relief valves, float valves, butterfly valves, plug
1 subject page bronze gate valves 6-17 bronze globe valves 18-25 bronze swing check valves 26-29 engineering data 58-68 iron swing check valves 39-40 iron gate valves 31-36 iron globe valves 37-38 the wm.powell company—profile 2-3 terms and conditions 69-71 iron ul and fm gate valves 42-51 iron ul and fm check valves 52-55 figure number cross comparison table 57 bronze and iron valve index 4
ANSI A300 defines as a tree risk assess-ment: “A systematic process used to identify, analyze, and evaluate risk.” “Mitigation” is a term that I see com-monly used inappropriately. In the Standard, it is very clearly defined as the process of diminishing risk. We do not eliminate risk in trees when we perform some form of mitigation practice. We are minimizing the risk to some .
