TELEDYNE CONTINENTAL AIRCRAFT ENGINE CATEGORY 5

2y ago
17 Views
2 Downloads
294.35 KB
14 Pages
Last View : 9d ago
Last Download : 2m ago
Upload by : Kaden Thurman
Transcription

TELEDYNE CONTINENTAL CATEGORY 5AIRCRAFT ENGINESERVICE INFORMATION LETTERContains Useful Information Pertaining To Your Aircraft EngineReason ForRevision :SIL 03-2BTechnical Portions FAAApprovedSupersedes M85-7Correction to engine / spark plug application Table 2 and 3.SUBJECT:CURRENTLY ACTIVE APPROVED SPARK PLUG APPLICATIONPURPOSE:Provide listing of currently approved spark plugs for TCM EnginesCOMPLIANCE:MODELSAFFECTED:As Required when replacing spark plugs.ALLGENERAL INFORMATION:The following Tables number 1, 2, 3 , and 4 list the most commonly used spark plugs by engine model. Additionallistings of approved spark plugs may be found in the engine’s FAA Type Certificate Data Sheet and the spark plugmanufacturer’s data.Refer to the spark plug manufacturer’s data for spark plug servicing information and required specialized tools.Spark plugs must be removed, cleaned, inspected, gapped and position rotated every 100 hours. Refer to Chart 1 forspark plug rotation sequence. Always install a new spark plug gasket when servicing spark plugs or installing newspark plugs. Chart 2 provides spark plug electrode gap specifications using an alpha code referenced in Table 1, 2and 3.CAUTION:Failure to install a new spark plug gasket each time the spark plug (s) are installed mayresult in incomplete sealing of the combustion chamber, loss of spark plug heat transfer,spark plug over heating, possible pre-ignition / detonation and internal engine damage.GENERAL INSTALLATION PROCEDURES:In the event spark plug manufacturer’s instructions are not available the following procedure may be used.1.2.3.4.5.6.Always install spark plugs with new copper gasket.Sparingly apply anti-seize to the spark plug threads. DO NOT APPLY ANTI-SEIZE TO THE FIRSTTHREAD.Always use a six point deep socket.Thread spark plug by hand into cylinder to within one or two threads of the gasket. If this is notpossible, cylinder head threads or spark plug threads need to be cleaned.Torque spark plugs to 300 to 360 inch pounds using a currently calibrated torque wrench.Handle spark plug leads with clean, dry hands.ISSUEDREVISEDPAGE NO REVISIONTMMODAYYEARMODAYYEAR0207200310262004 2003 Teledyne Continental Motors, Inc.Teledyne Continental Motors, Inc.1 of 14P.O. Box 90 Mobile Alabama 251-438-3411SIL 03-2B

7.Before installing the spark plug lead connector, wipe it clean using a lint-free cloth moistened withMEK, acetone, wood alcohol or naphtha.8. Ensure that inside of spark plug barrel is clean and dry.9. Insert spark plug lead connector into spark plug barrel with fingers in a straight line with the sparkplug.10. Screw connector nut into place until finger tight.11. Tighten an additional 1/8 turn with the correct size open end wrench while holding the spark plug leadferrule stationary.WARNING:DO NOT INSTALL OR USE ANY SPARK PLUG THAT HAS BEEN DROPPED OR HASANY MECHANICAL DAMAGE.Chart 1SPARK PLUG ROTATION CHARTS4 CYLINDER ENGINESPARK PLUG ROTATION6 CYLINDER ENGINESPARK PLUG ROTATIONFROM CYLINDERNUMBER1 TOP1 BOTTOM2 TOP2 BOTTOM3 TOP3 BOTTOM4 TOP4 BOTTOM5 TOP5BOTTOM6 TOP6 BOTTOMFROM CYLINDERNUMBER1 TOP1 BOTTOM2 TOP2 BOTTOM3 TOP3 BOTTOM4 TOP4 BOTTOMTO CYLINDERNUMBER6 BOTTOM6 TOP5 BOTTOM5 TOP4 BOTTOM4 TOP3 BOTTOM3 TOP2 BOTTOM2 TOP1 BOTTOM1 TOPTO CYLINDERNUMBER4 BOTTOM4 TOP3 BOTTOM3 TOP2 BOTTOM2 TOP1 BOTTOM3 TOPCHART 2SPARK PLUG ELECTRODE GAPSPARK PLUG GAP CHARTGAP CODEELECTRODE GAPA.015 - .018B.016 - .021C.017 - .020D.018 - .021E.019 - .022{NO GAP AVAILABLEISSUEDREVISEDPAGE NO ne Continental Motors, Inc.2 of 14P.O. Box 90 Mobile Alabama 251-438-3411SIL 03-2B

SPITFIRE TMP.O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, Inc.XXSMITH INDUSTRIESXXXXXCDCSIL 03-23 of 14BPAGE NO REVISIONXXXXXXXXXXXE-225XXXXXXXXXXXXE-165; E-185XXXEXXEGO-300-A,B,C,D,E,FXEXXAXXAC-145; O-300-A,B,C,DAC-115; C-125AXAO-200-A,B,CXAXXAC-90XAXXEC-75; C-85XEXXAXXAXXXXEW-670; R-670XXXEA-100XA-80AXAA-65; A-75AXISSUEDTABLE 1SPARK PLUG APPLICATIONAUBURN SPARK PLUG CO. - AC SPARK PLUG CO.A-40; A-50Recommended Electrode GapBARREL SIZETCM Part NumberSPARK PLUGMANUFACTURER XXXCCXXXXXXXXXXXXCXXXXXXXXXXXXC6263643/4 -20HSR-83 P6263633/4 -20HSR-936358613/4 -20HSR-886263623/4 -20A-885394325/8 -24SR-83 P6253505/8 -24SR-936358625/8 -24SR-876274495/8 -24HSR-876274503/4 -20AC-271635323/4 -20AC-2736305333/4 -20AC-2916355893/4 -20AC-2816327383/4 -20AC-2836327403/4 -20AC-2936358603/4 -202736499103/4 -20HSR-866499123/4 -20SR-876499135/8 -24HSR-876499143/4 -20HSR-886499153/4 -20RSH35-8R/16460903/4 -20RSH101R6396093/4 -20RSH35-8R6419773/4 -20RSE23-3R6420975/8 -24RSH23-3R6420983/4 -20RSE35-8R/16460895/8 -24RSE23-3R/16460915/8 -24RSH23-3R/16460923/4 -20

PITFIRE SERIESXXXXAXXXAXXXAXXXAXXXATMXXXAXXXXAXXXXXEP.O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, R,P,TTABLE 1SPARK PLUG APPLICATION (Continued)AUBURN SPARK PLUG CO. - AC SPARK PLUG O-550-A,B,C,EIO-550-A,B,C,D,E,F,L,N,P,RRecommended Electrode GapBARREL SIZETCM Part NumberSPARK PLUGMANUFACTURER PARTNUMBERMANUFACTURERHSR-86SMITH INDUSTRIESXXEXXXCDXXXCSIL 03-24 of 14BPAGE NO XC6263643/4 -20HSR-83 P6263633/4 -20HSR-936358613/4 -20HSR-886263623/4 -20A-885394325/8 -24SR-83 P6253505/8 -24SR-936358625/8 -24SR-876274495/8 -24HSR-876274503/4 -20AC-271635323/4 -20AC-2736305333/4 -20AC-2916355893/4 -20AC-2816327383/4 -20AC-2836327403/4 -20AC-2936358603/4 -202736499103/4 -20HSR-866499123/4 -20SR-876499135/8 -24HSR-876499143/4 -20HSR-886499153/4 -20RSH35-8R/16460903/4 -20RSH101R6396093/4 -20RSH35-8R6419773/4 -20RSE23-3R6420975/8 -24RSH23-3R6420983/4 -20RSE35-8R/16460895/8 -24RSE23-3R/16460915/8 -24RSH23-3R/16460923/4 -20

DAY0702ISSUEDMOTSIOL-550-CIO-240-A,B; B,C,CB,D,DB, CA6-320-B & B,D,,F,J,K,L,M,MB,N,NBLIO-520-PRecommended Electrode GapBARREL SIZETCM Part NumberSPARK PLUGMANUFACTURER PARTNUMBERMANUFACTURERTABLE 1SPARK PLUG APPLICATION (Continued)AUBURN SPARK PLUG CO. - AC SPARK PLUG CO.HSR-86SPITFIRE SERIESSMITH RREVISEDEEXAXXXAXAXAXXXAXXXATMXXXAXXAEP.O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, Inc.EXEXXXCXDXXXCSIL 03-25 of 14BPAGE NO REVISIONEXXXCXXXCXXXCXXXCXXXC6263643/4 -20HSR-83 P6263633/4 -20HSR-936358613/4 -20HSR-886263623/4 -20A-885394325/8 -24SR-83 P6253505/8 -24SR-936358625/8 -24SR-876274495/8 -24HSR-876274503/4 -20AC-271635323/4 -20AC-2736305333/4 -20AC-2916355893/4 -20AC-2816327383/4 -20AC-2836327403/4 -20AC-2936358603/4 -202736499103/4 -20HSR-866499123/4 -20SR-876499135/8 -24HSR-876499143/4 -20HSR-886499153/4 -20RSH35-8R/16460903/4 -20RSH101R6396093/4 -20RSH35-8R6419773/4 -20RSE23-3R6420975/8 -24RSH23-3R6420983/4 -20RSE35-8R/16460895/8 -24RSE23-3R/16460915/8 -24RSH23-3R/16460923/4 -20

; O-300-A,B,C,DXXXXC-115; C-125E-165; E-185XO-200-A,B,CXXXC-90XGO-300-A,B,C,D,E,FXC-75; MXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXP.O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, Inc.XXXXXXXXXXXXXXW-670; R-670XX{XXXXBG-707S{RB-485SA-100XXA-65; A-75XXA-40; A-50BG-613S{XXXXXXXXSIL 03-26 of 14BPAGE NO 417N/AUNSHLDB5302035/8 24BBG-SU48520902UNSHLD{RHM38SBBG-707 SR5201295/8 24{REM38SB5201285/8 24BARREL SIZERHU27EB5201195/8 24TCM Part NumberREM38EB5305745/8 24BBG-706530170UNSHLDBBG-706R5307445/8 24BBG-706SR5302045/8 24BBG-919SR6262965/8 24BBG-919SRS6273415/8 24BBG-RB955S6273423/4 -20BREM40E6276435/8 24{REM37BY6557075/8 24{RHM40E6279783/4 -20{M41E635149UNSHLD{RHB32E6346753/4 -20{RHB37EN/A3/4 -20{RHM38E6300493/4 -20{6283255/8 24{6363443/4 -20{6466295/8 24SPARK PLUGMANUFACTURER PARTNUMBER6466303/4 -20Recommended Electrode GapBG-706 S6466313/4 -20CHAMPION SPARK PLUG COMPANYRHB32S6466323/4 -20B. G. CORPORATIONRHU32E6547083/4 -20MANUFACTURERRHB36STABLE 2SPARK PLUG APPLICATIONRHU32S6547093/4 -20

DAY07MO0220031026DAY2004YEARP.O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, Inc.XXXXXXXXXXXXSIL 03-27 of 14BPAGE NO XXXXXBXXXXBBBBG-4822305UNSHLDBBG-417N/A5/8 -24BBG-706 S530203UNSHLDBBG-SU48520902UNSHLDBBG-707 SR5201295/8 -24BBG-613S5201285/8 -24BBG-707S5201195/8 -24BRB-485S5305745/8 -24BBG-706530170UNSHLDBBG-706R5307445/8 -24BBG-706SR5302045/8 -24{BG-919SR6262965/8 -24{BG-919SRS6273415/8 -24{BG-RB955S6273423/4 -20{REM40E6276435/8 -24{REM37BY6557075/8 -24{RHM40E6279783/4 -20{M41E635149UNSHLD{RHB32E6346753/4 -20{RHB37EN/A3/4 -20{RHM38E6300493/4 -20{REM38E6283255/8 -24{RHU27E6363443/4 -20{REM38S6466295/8 -24{RHM38S6466303/4 P,RRecommended Electrode GapBARREL SIZETCM Part NumberSPARK PLUGMANUFACTURER PARTNUMBERRHB36S6466313/4 -20CHAMPION SPARK PLUG COMPANYRHB32S6466323/4 -20B. G. CORPORATIONRHU32E6547083/4 -20MANUFACTURERTABLE 2SPARK PLUG APPLICATION (Continued)RHU32S6547093/4 -20

O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, Inc.XXXXXXXXXXXXXSIL 03-28 of 14BPAGE NO 417N/AUNSHLDB5302035/8 -24BBG-SU48520902UNSHLDBBG-707 SR5201295/8 -24BBG-613S5201285/8 -24BBG-707S5201195/8 -24BRB-485S5305745/8 -24BBG-706530170UNSHLDBBG-706R5307445/8 -24BBG-706SR5302045/8 -24BBG-919SR6262965/8 -24BBG-919SRS6273415/8 -24{BG-RB955S6273423/4 -20{REM40E6276435/8 -24{REM37BY6557075/8 -24{RHM40E6279783/4 -20{M41E635149UNSHLD{RHB32E6346753/4 -20{RHB37EN/A3/4 -20{RHM38E6300493/4 -20{REM38E6283255/8 -24{RHU27E6363443/4 -20{REM38S6466295/8 -24{RHM38S6466303/4 -20MOIO-240-A,B; 60-A,AB,B,BB,C,CB,D,DB, E,EB,F,FB ,G ,GB,H,HB,JB,KB,LB,MB,RB,SB6-285-B,C,BA,CA6-320-B & CB,D,E,F,J,K,L,M,MB,N,NBLIO-520-PRecommended Electrode GapBARREL SIZETCM Part NumberSPARK PLUGMANUFACTURER PARTNUMBERRHB36S6466313/4 -20CHAMPION SPARK PLUG COMPANYRHB32S6466323/4 -20B. G. CORPORATIONTABLE 2SPARK PLUG APPLICATION (Continued)RHU32E6547083/4 -20MANUFACTURERBG-706 SRHU32S6547093/4 -20

B,C,D,E,FE-165; 470-4,11,13,13A,15XXXXXXXXXXO-470-2XXXC-145; O-300-A,B,C,DXO-200-A,BC-115; XXXXDTMXXXXXXXXXXXXDXXXXXXXXXXDP.O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, Inc.XXXXXXXXXXXXDXXXXXXXXXXDXXAAAASIL 03-29 of 14BPAGE NO REVISIONXXAXAXA6558995/8 -24B6559015/8 -24B6559143/4 -20B6559025/8 -24B6560825/8 -24B6559153/4 -20B6559183/4 -20B6559045/8 -24B6559063/4 -20B6559083/4 906325035/8 -24C-75; C-8507UREB37E6325043/4 -20X02URHB37E6325075/8 -24W-670; R-670YEARURHB32E6325083/4 -20XDAYSJ-1906325115/8 -24A-65; A-75MOSE-2306325123/4 -20XISSUEDSJ-2306325155/8 -24A-40; A-50A-100LJ-3106325163/4 -20BA-80LJ-6306325203/4 -20Recommended Electrode GapBARREL SIZETCM Part NumberSPARK PLUGMANUFACTURER PARTNUMBERSE-270RED SEALSJ-270AUTOLITE BY UNISONSE-270-P6325135/8 -24MANUFACTURERLE-310TABLE 3SPARK PLUG APPLICATIONSJ-270-P6325143/4 -20

DP.O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, XXXXXDXXXXAXAXAXXAXXXXASIL 03-210 of 14BPAGE NO REVISIONXXXXAXXXXXA6558995/8 -24D6559015/8 -24B6559143/4 -20B6559025/8 -24B6559153/4 -20B6559183/4 -20B6559045/8 -24B6559063/4 -20B6559083/4 -20BSA-190632501UNSHLDBSE-1906325035/8 -24GIO-470-AMOUREB37E6325043/4 -20XYEARURHB37E6325075/8 ,J,JB,K,KBURHB32E6325083/4 -20XIO-470-J,KSJ-1906325115/8 -24IO-470-C,G,R,P,TGSO-526-ASE-2306325123/4 -20XFSO-526-A,CSJ-2306325155/8 -24XFSO-470-ALJ-3106325163/4 S,U,VLJ-6306325203/4 IO-550-A,B,C,EIOF-550-B,C,D,E,F,L,N,P,RRecommended Electrode GapBARREL SIZETCM Part NumberSPARK PLUGMANUFACTURER PARTNUMBERSE-270RED SEALSJ-270AUTOLITE BY UNISONSE-270-P6325135/8 -24MANUFACTURERLE-310TABLE 3SPARK PLUG APPLICATION (Continued)SJ-270-P6325143/4 -20

DAY07MO02ISSUED2003YEARIO-240-A,B; XXXXP.O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, Inc.XXXXXXXAAXXXAXXASIL 03-211 of 14BPAGE NO REVISIONXXAXXA6558995/8 -24A6559015/8 -24D6559143/4 -20D6559025/8 -24D6559153/4 -20D6559183/4 -20D6559045/8 -24B6559063/4 -20B6559083/4 -20BSA-190632501UNSHLDBSE-1906325035/8 -24B6325043/4 -20B6325075/8 -24B6325083/4 -20B6325115/8 -24B6325123/4 -20XL/TSIO-360-A,AB,B,BB,C,CB,D,DB, /8 -B & T6-320-ALJ-3106325163/4 -20XTSIO-360-A,BLJ-6306325203/4 ,BB,C,CB,D,E,F,J,K,L,M,MB,N,NBLIO-520-PRecommended Electrode GapBARREL SIZETCM Part NumberSPARK PLUGMANUFACTURER PARTNUMBERSE-270RED SEALSJ-270AUTOLITE BY UNISONSE-270-P6325135/8 -24MANUFACTURERLE-310TABLE 3SPARK PLUG APPLICATION (Continued)SJ-270-P6325143/4 -20

DAY07MO02ISSUEDBENDIX AUTO-LITE CORPORATIONXXXXXO-200-A,B,CC-115; C-125C-145; O-300-A,B,C,DGO-300-A,B,C,D,E,FE-165; 11,13,13A,15XXXXXXXXAAAEXXATMXXAAAP.O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, Inc.XXC-90O-470-2XXC-75; C-85XXW-670; R-670XXXA-80XEA-100XAA-65; A-75A-40; A-50Recommended Electrode GapBARREL SIZETCM Part NumberSPARK PLUGMANUFACTURER PARTNUMBERMANUFACTURERTABLE 4SPARK PLUG APPLICATIONSH20AXXXXXXXXXXESIL 03-212 of 14BPAGE NO REVISIONA6278925/8 -24SH156324605/8 -24SH200A6324613/4 -20SH266324625/8 -24SH2606324633/4 -20SH1506324673/4 -20PH266351463/4 -20PH2606351475/8 -24SL300A6279913/4 -20SL3506324653/4 -20PL3506351483/4 -20H15632274UNSHLD

DAY07MO02ISSUEDXO-470-B,G,H,M,N,PBENDIX AUTO-LITE 2004YEARREVISEDTMXXXXXAXAXAP.O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, mmended Electrode 50-B,C,D,E,F,L,N,P,RBARREL SIZETCM Part NumberSPARK PLUGMANUFACTURER PARTNUMBERMANUFACTURERTABLE 4SPARK PLUG APPLICATION (Continued)SH20AESIL 03-213 of 14BPAGE NO REVISIONXXA6278925/8 -24SH156324605/8 -24SH200A6324613/4 -20SH266324625/8 -24SH2606324633/4 -20SH1506324673/4 -20PH266351463/4 -20PH2606351475/8 -24SL300A6279913/4 -20SL3506324653/4 -20PL3506351483/4 -20H15632274UNSHLD

240-A,B; 60-A,AB,B,BB,C,CB,D,DB, CA6-320-B & T6-320-ATSIO-360-A,BBENDIX AUTO-LITE CORPORATIONXAEAAAEXXATMXXAAXXXAP.O. Box 90 Mobile Alabama 251-438-3411Teledyne Continental Motors, ,MB,N,NBLIO-520-PRecommended Electrode GapBARREL SIZETCM Part NumberSPARK PLUGMANUFACTURER PARTNUMBERMANUFACTURERTABLE 4SPARK PLUG APPLICATION (Continued)SH20AESIL 03-214 of 14BPAGE NO REVISIONXXA6278925/8 -24SH156324605/8 -24SH200A6324613/4 -20SH266324625/8 -24SH2606324633/4 -20SH1506324673/4 -20PH266351463/4 -20PH2606351475/8 -24SL300A6279913/4 -20SL3506324653/4 -20PL3506351483/4 -20H15632274UNSHLD

ISSUED REVISED PAGE NO REVISION MO DAY YEAR MO DAY YEAR 2 of 14 02 07 2003 10 26 2004 Teledyne Continental Motors, Inc. TM P.O. Box 90 Mobile Alabama 251-438-3411 SIL 03-2 B 7. Before installing the spark plug lead connec

Related Documents:

continental motors an allegheny teledyne company p.o. box 90 mobile al 36601 334-438-3411 teledyne continental aircraft engine service information letter contains useful information pertaining to the continental aircraft engine subject: current listing of sealants, lubr icants, & adhesives authorized by tcm.

TELEDYNE CONTINENTAL AIRCRAFT ENGINE TELEDYNE INDUSTRIES, INC. 1991 TELEDYNE CONTINENTAL MOTORS Aircraft Products PO Box 90 Mobile Alabama 36601 Member of GAMA General Aviation Manufacturer’s Association service bulletin 11 February 1991 SUBJECT: PISTON IDENTIFICATION AN

TELEDYNE CONTINENTAL AIRCRAFT ENGINE CRITICAL SERVICE BULLETIN Compliance Necessary To Maintain Safety . NOTE: Engines listed in A, B and C may have been overhauled or repaired after shipment from TCM . IO-520 Series Overhaul Manual. Form # X30574A, TSIO-520 Permold Series Overhaul Manual.

1.Engine Oil SABA 13 1.Engine Oil 8000 14 1.Engine Oil 6000 15 1.Engine Oil 3000 16 1.Engine Oil Alvand 17 1.Engine Oil Motor Cycle Engine Oil M-150 18 1.Engine Oil M-100 19 1.Engine Oil Gas Engine Oil CNG-BUS 20 1.Engine Oil G.I.C.X.LA 21 1.Engine Oil G.I.C.X. 22 1.Engine Oil Diesel Engine Oil Power 23 1.Engine Oil Top Engine 24

propellers operate the engine at a high enough power setting to allow the cycling of the aircraft propeller. For aircraft with fixed pitched propeller, operate the engine to full static RPM. WARNING Magnetos must be grounded and fuel must be shut off prior to test to make certain that the engine

The warrantor is Teledyne Isco, 4700 Superior, Lincoln, NE 68504, U.S.A. * This warranty applies to the USA and countries where Teledyne Isco does not have an authorized dealer. Customers in countries outside the USA, where Teledyne Isco has an authorized de aler, should contact their Teledyne Isco dealer for warranty service.

The warrantor is Teledyne Isco, 4700 Superior, Lincoln, NE 68504, U.S.A. * This warranty applies to the USA and countries where Teledyne Isco does not have an authorized dealer. Customers in countries outside the USA, where Teledyne Isco has an authorized de aler, should contact their Teledyne Isco dealer for warranty service.

P, produced by A02. Next, A01 asks A03 for every such component to get offers from companies that are able to supply the component. So, a number of exploring transactions T03 may be carried out within one T01, namely as many as there are components of P which are not produced by the tier n company. In order to execute