Rotary Cutter - Land Pride

3y ago
67 Views
2 Downloads
1.51 MB
66 Pages
Last View : Today
Last Download : 2m ago
Upload by : Halle Mcleod
Transcription

Table of ContentsPart Number IndexRotary CutterRCR1542, RCR1548, RCR1560 & RCR157237976312-556PParts ManualRead the Operator's Manual entirely. Whenyou see this symbol, the subsequentinstructions and warnings are serious - followwithout exception. Your life and the lives ofothers depend on it! Copyright 2020 Printed 07/13/20Cover photo may show optional equipment notsupplied with standard unit.

Table of ContentsPart Number IndexTable of ContentsSection 1: Introduction.4Using This Manual.4Manual Replacement Information.4Manual Revisions.4Touch-up Paint.4Hardware Legend.5Replacement Hardware.5Serial Numbers.5Part Number Service Coding.5Section 2: Decks.6Blade Bar Option.6Blade Carrier.8Blade Carrier RCR1542/48 S/N 655703-.10Blade Carrier RCR1542/48 S/N 655704 to 669918.12Blade Carrier RCR1542/RCR1548 669919 .14Blade Drive S/N 961387 .16Deck and Hitch S/N 961387 .18Deck and Hitch with Blade Drive S/N 961386-.22Section 3: Gauge Wheels.25Tail Wheel.26Section 4: Guards.28Guards Chain.28Guards Rubber.30Section 5: Drivelines.32Driveline (826-019C) Eurocardan (S/N 325013-).32Driveline (826-019C) Eurocardan (S/N 325014 ).34Driveline (826-020C) Eurocardan.36Driveline (826-020C) Walterscheid.38Driveline (826-021C) Eurocardan.40Driveline (826-022C) Eurocardan.42Driveline (826-022C) Walterscheid.44Driveline (826-658C & 312-024A) Comer.46Driveline (826-659C & 312-023A) Comer.48Driveline Slip Clutch (1344014) Eurocardan.50Driveline Slip Clutch (384264) Walterscheid.52Section 6: Gearboxes.54Gearbox (826-018C) OMNI (RCR1560 S/N 293100) &RCR1572.54Gearbox (826-026C) OMNI RCR1542.56RCR1548 & (RCR1560 S/N 293101 ).56Gearbox (826-383C) Comer S/N 377869 .58Section 7: Decals.60Decal Placement.60Touch-up Paints - LP.62Part Number Index.64 Copyright 2020. All rights reserved.Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual,Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. LandPride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflectthe product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended forordering parts only.Land Pride is registered trademark.All other brands and product names are trademarks or registered trademarks of their respective holders.Printed in the United States of America.2RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P07/13/20

Table of ContentsPart Number IndexAlphabetized Table of ContentsBBlade Bar Option.6Blade Carrier.8Blade Carrier RCR1542/48 S/N 655703-.10Blade Carrier RCR1542/48 S/N 655704 to 669918.12Blade Carrier RCR1542/RCR1548 669919 .14Blade Drive S/N 961387 .16DDecal Placement.60Deck and Hitch S/N 961387 .18Deck and Hitch with Blade Drive S/N 961386-.22Driveline (826-019C) Eurocardan (S/N 325013-).32Driveline (826-019C) Eurocardan (S/N 325014 ).34Driveline (826-020C) Eurocardan.36Driveline (826-020C) Walterscheid.38Driveline (826-021C) Eurocardan.40Driveline (826-022C) Eurocardan.42Driveline (826-022C) Walterscheid.44Driveline (826-658C & 312-024A) Comer.46Driveline (826-659C & 312-023A) Comer.48Driveline Slip Clutch (1344014) Eurocardan.50Driveline Slip Clutch (384264) Walterscheid.52GGearbox (826-018C) OMNI (RCR1560 S/N 293100) &RCR1572.54Gearbox (826-026C) OMNI RCR1542, RCR1548 &(RCR1560 S/N 293101 ).56Gearbox (826-383C) Comer S/N 377869 .58Guards Chain.28Guards Rubber.30TTail Wheel.26Touch-up Paints - LP.6207/13/20RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P3

Table of Contents4Part Number IndexRCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P07/13/20

Table of Contents07/13/20Part Number IndexRCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P5

Land PrideTable of ContentsPart Number IndexSection 2: DecksBlade Bar OptionApplies to RCR1542379786RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P07/13/20

Table of ContentsBlade Bar OptionSection 2: DecksPart Number IndexLand PrideApplies to RCR1542Ref. Part No.1.1.1.1.2.3.4.5.5.6.Dwg 20C803-170C804-212C804-147C820-229C07/13/20Part DescriptionDrawing Image NumberRPBY 312-808D QTY 2BLADE SPACER 16 GA.064 THICKBLADE SPACER 20 GA. .0.04 THICKBLADE SPACER 24GA. .0.03 THICKRCR1542 BLADE BAR WELDMENTBLD BOLT 1 1/8-12X3.5 W/.18KEYNUT HEX TOP LOCK 1 1/8-12 PLT.WASHER FLAT 2ODX1.16IDX.31 THKWASHER FLAT 1" HARDENEDCUTTER BLADE 1/2X3X15.75 CCWCommentsRevisionAs Required S/N 776426As Required S/N 776426As Required S/N 776426As Required S/N 776426-S/N 772093S/N 772094 RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P7

Land PrideTable of ContentsPart Number IndexSection 2: DecksBlade CarrierApplies to RCR1560, RCR157270rcr8RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P07/13/20

Table of ContentsSection 2: DecksPart Number IndexLand PrideBlade CarrierApplies to RCR1560, RCR1572Ref. Part No.Part DescriptionComments1.1.1.1.2.Dwg awing Image NumberRPBY 312-808D QTY 2BLADE SPACER 16 GA.064 THICKBLADE SPACER 20 GA. .0.04 THICKBLADE SPACER 24GA. .0.03 THICKMATCHED BLADE ASSY2.326-040AMATCHED BLADE 7C820-198C820-212C820-199C318-586A15 DISHPAN WLDMT SM.HUB(COMER)BLADE BOL 1 1/8-12X3 7/16 W/KYNUT HEX TOP LOCK 1 1/8-12 PLT.WASHER FLAT 1" HARDENEDCUTTER BLADE 1/2 X3X25 CCWCUTTER BLADE 1/2X3X25 LL CCWCUTTER BLADE 1/2 X3X31 CCWBLADE BOLT KIT07/13/20RevisionAs Required S/N 776426As Required S/N 776426As Required S/N 776426As Required S/N 77642660" Unit Includes 2 ea. of items 4 thru772" Unit Includes 2 ea. of items 4 thru760" Unit60" Unit72" UnitItem 1 not includedRCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P9

Table of Contents Part Number IndexBlade Carrier RCR1542/48 S/N 655703-Land PrideSection 2: DecksApplies to RCR1542, RCR15483026810RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P07/13/20

Table of Contents Part Number IndexBlade Carrier RCR1542/48 S/N 655703-Section 2: DecksLand PrideApplies to RCR1542, RCR1548Ref. Part No.Part DescriptionComments1.1.1.1.2.Dwg ng Image NumberRPBY 312-808D QTY 2BLADE SPACER 16 GA.064 THICKBLADE SPACER 20 GA. .0.04 THICKBLADE SPACER 24GA. .0.03 THICKMATCHED BLADE ASSY2.326-038AMATCHED BLADE 0-229C820-065C15 DISHPAN WLDMT SM.HUB(COMER)BLADE BOL 1 1/8-12X3 7/16 W/KYNUT HEX TOP LOCK 1 1/8-12 PLT.WASHER FLAT 1" HARDENEDCUTTER BLADE 1/2 X3X15 3/4 CCWCUTTER BLADE 1/2 X3X18 3/4 CCW07/13/20RevisionAs RequiredAs RequiredAs RequiredAs RequiredRCR1542 Includes 2 ea. of items 4thru 7RCR1548 Includes 2 ea. of items 4thru 7RCR1542RCR1548RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P11

Table of Contents Part Number IndexBlade Carrier RCR1542/48 S/N 655704 to 669918Land PrideSection 2: DecksApplies to RCR1542, RCR15483026912RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P07/13/20

Table of Contents Part Number IndexBlade Carrier RCR1542/48 S/N 655704 to 669918Section 2: DecksLand PrideApplies to RCR1542, RCR1548Ref. Part No.Part DescriptionComments1.1.1.1.2.3.Dwg 37ADrawing Image NumberRPBY 312-808D QTY 2BLADE SPACER 16 GA.064 THICKBLADE SPACER 20 GA. .0.04 THICKBLADE SPACER 24GA. .0.03 THICK15 DISHPAN WLDMT SM.HUB(COMER)MATCHED BLADE ASSY3.326-038AMATCHED BLADE 0-065C318-586ABLADE BOL 1 1/8-12X3 7/16 W/KYNUT HEX TOP LOCK 1 1/8-12 PLT.WASHER FLAT 1" HARDENEDCUTTER BLADE 1/2 X3X15 3/4 CCWCUTTER BLADE 1/2 X3X18 3/4 CCWBLADE BOLT KIT07/13/20RevisionAs RequiredAs RequiredAs RequiredAs RequiredRCR1542 Includes 2 ea. of items 4thru 7RCR1548 Includes 2 ea. of items 4thru 7RCR1542RCR1548Service Kit (Item 1 Not included)RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P13

Table of Contents Part Number IndexBlade Carrier RCR1542/RCR1548 669919 Land PrideSection 2: DecksApplies to RCR1542, RCR15483033514RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P07/13/20

Table of Contents Part Number IndexBlade Carrier RCR1542/RCR1548 669919 Section 2: DecksLand PrideApplies to RCR1542, RCR1548Ref. Part No.Part DescriptionComments1.1.1.1.2.3.Dwg 01ADrawing Image NumberBLADE SPACER 16 GA .064 ThickRPBY 312-808D QTY 2BLADE SPACER 20 GA .04 ThickBLADE SPACER 24 GA .03 Thick15 DSHPN WMT SM.HUB(COMR) 3/16MATCHED BLADE ASSY3.326-402AMATCHED BLADE 820-229C820-065C326-185ABLD BOLT 1 1/8-12X3.5 W/.18KEYNUT HEX TOP LOCK 1 1/8-12 PLT.WASHER FLAT 1" HARDENEDWASHER FLAT 2ODX1.16IDX.31 THKCUTTER BLADE 1/2 X3X15 3/4 CCWCUTTER BLADE 1/2 X3X18 3/4 CCWBLADE BOLT KIT 3/16"KEY07/13/20RevisionAs Required S/N 776426As Required S/N 776426As Required S/N 776426As Required S/N 776426RCR1542 Includes 2 ea. of items 4thru 7RCR1548 Includes 2 ea. of items 4thru 7S/N 772094 S/N 772093RDR1542RCR1548Service KitRCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P15

Table of ContentsBlade Drive S/N 961387 Land PridePart Number IndexSection 2: DecksApplies to RCR1542, RCR15483798016RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P07/13/20

Table of ContentsBlade Drive S/N 961387 Section 2: DecksPart Number IndexLand PrideApplies to RCR1542, RCR1548Ref. Part No.1.2.3.4.4.5.6.7.8.8.9.10.11.12.12.13.13.Dwg art DescriptionCommentsDrawing Image NumberDRIVELINE CAT.2 X 30 S/BDRIVELINE CAT.2 X 30 CLUTCHSNAP RING EXT 1 3/8 5100-137HHCS 5/8-11X1 3/4 GR5 FTHDHHCS 5/8-11X2 GR5HHCS 1/2-13X3 1/2 GR2HHCS 1/2-13X3 1/2 GR8NUT HEX NYLOCK 1/2-13NUT HEX FLANGE LOCK 5/8-11 PLTNUT HEX NYLOCK 5/8-11 PLTWASHER LOCK SPRING 5/16 PLTWASHER FLAT 5/16 USS PLTGBOX RC16 1.38 RD.1:1.93 STD.LAND PRIDE CONESMALL SHAFT CONE W ACCESS DOORHHCS M8X1.25X20 GR8.8 THD-LCKRPBY 842-243CRevisionUsed only with 312-023AS/N S/N -S/N S/N -Replaced with 837-101CRCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P17

Table of ContentsDeck and Hitch S/N 961387 Land PridePart Number IndexSection 2: DecksApplies to RCR1542, RCR15483797718RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P07/13/20

Table of ContentsDeck and Hitch S/N 961387 Section 2: DecksPart Number IndexLand PrideApplies to RCR1542, RCR1548Ref. Part 9.20.21.22.23.24.25.26.27.28.29.30.31.32.Dwg C07/13/20Part DescriptionCommentsDrawing Image NumberRCR1542 DECK WELDEMENTRCR1542 DECK WELDEMENT GREENRCR1542 DECK WELDEMENT ORANGERCR1542 DECK WELDEMENT REDRCR1542 DECK WELDEMENT BLUERCR1548 DECK WELDMENTRCR1548 DECK WELDMENT GREENRCR1548 DECK WELDMENT ORANGERCR1548 DECK WELDMENT REDRCR1548 DECK WELDMENT BLUEGAUGE WHEEL ADJ. FLATGAUGE WHEEL SUPPORT FLATMANUAL CONTAINER KIT, 1 1/4DRIVELINE HANGER W/HARDWAREDRIVELINE HOLDER W/HARDWARETAILWHEEL A-ARM WLDMTRPBY 327-183HBUSHING 1.25ODX.89X.56LGREAR BRACE 1542REAR BRACE 1542 GREENREAR BRACE 1542 ORANGEREAR BRACE 1542 REDREAR BRACE 1542 BLUEREAR BRACE 12 & 1548REAR BRACE 12 & 1548-GREENREAR BRACE 12 & 1548-ORANGEREAR BRACE 12 & 1548-REDREAR BRACE 12 & 1548-BLUEA FRAME 42, 48 & 60A FRAME 48 & 60-GREENA FRAME 48 & 60-ORANGEA FRAME 48 & 60-REDA FRAME 48 & 60-BLUEHHCS 5/16-18X1 1/2 GR5HHCS 5/16-18X1 1/4 GR5HHCS 5/8-11X1 3/4 GR5HHCS 3/4-10X4 GR5HHCS 5/16-18X2 1/4 GR5RHSNB 3/8-16X1 1/4 GR5HHCS 1/4-20X1 1/4 GR5NUT HEX FLG TP LK 5/16-18ZNYCRNUT HEX FLANGE LOCK 3/4-10 PLTNUT HEX WHIZ 3/8-16 PLTNUT HEX NYLOCK 1/4-20NUT HEX FLANGE LOCK 5/8-11 PLTWASHER FLAT 1/4 SAE PLTWASHER FLAT 5/16 USS PLTWASHER FLAT 5/16 SAE PLTWASHER FLAT 7/8 USS PLTPIN HTCH C1 7/8-14 THD W/NPIN HAIR COTTER .120 PLTPIN CLVS .75X3.94 USBLSPRING TORSION DRVLN HLDERFLOAT TOP HITCH CAST DUCTILEMANUAL STORAGE CONTAINERDRIVELINE HOOKMOUNT DRIVELINE 1548RCR1548RCR1548RCR1548RCR1548S/N 1056087 S/N 1056086S/N 1089012 S/N 1089011- RCR1548RCR1548RCR1548RCR1548RCR1542 & RCR1548RCR1542 & RCR1548RCR1542 & RCR1548RCR1542 & RCR1548RCR1542 & RCR1548S/N 1056087 S/N 1056086-S/N 1056087 RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P19

Table of Contents Part Number IndexDeck and Hitch S/N 961387 (continued)Land PrideSection 2: DecksApplies to RCR1542, RCR1548Ref. Part No.Part Description33.34.840-273C327-763DPLUG LP 3" ID RUBBERSHIELD UPPER RH35.327-764DSHIELD UPPER LH20CommentsRevisionS/N 1341733 Include decal858-148C see decal placementS/N 1341733 Include decal858-148C see decal placementRCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P07/13/20

Table of Contents Part Number IndexDeck and Hitch S/N 961387 (continued)Section 2: DecksLand PrideApplies to RCR1542, RCR1548This Page Intentionally Left Blank07/13/20RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P21

Table of Contents Part Number IndexDeck and Hitch with Blade Drive S/N 961386-Land PrideSection 2: DecksApplies to RCR1542, RCR1548, RCR1560, RCR15721633822RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P07/13/20

Table of Contents Part Number IndexDeck and Hitch with Blade Drive S/N 961386-Section 2: DecksLand PrideApplies to RCR1542, RCR1548, RCR1560, RCR1572Ref. Part No.Part .6.6.6.6.6.6.6.Dwg D84326-893D85312-849DDrawing Image NumberA-FRAME BEIGEA-FRAME GREENA-FRAME ORANGEA-FRAME REDA-FRAME BLUEA-FRAME BLACKPIVOTING UPPER HITCH-BLACKPIN HAIR COTTER .120 PLTPIN CLEVIS 3/4 X 3 1/2 PLTNUT HEX TOP LOCK 5/8-11 PLTRCR1542 REAR STRAPS BEIGERCR1542 REAR STRAPS GREENRCR1542 REAR STRAPS ORANGERCR1542 REAR STRAPS REDRCR1542 REAR STRAPS BLUERCR1542 REAR STRAPS BLACKREAR BRACE BEIGEREAR BRACE GREENREAR BRACE ORANGEREAR BRACE REDREAR BRACE BLUEREAR BRACE BLACKREAR 00-079C826-018C826-383CREAR BRACEREAR STRAPS BEIGEREAR STRAPS GREENREAR STRAPS ORANGEREAR STRAPS REDREAR STRAPS BLUEREAR STRAPS BLACKREAR BRACE BEIGEREAR BRACE GREENREAR BRACE ORANGEREAR BRACE REDREAR BRACE BLUEREAR BRACE BLACKSPACER TUBE 1 1/8 OD X 3 1/8HHCS 5/8-11X5 GR5NUT HEX FLANGE LOCK 5/8-11 PLTLAND PRIDE CONESMALL SHAFT CONE W ACCESS DOORHHCS M8X1.25X20 GR8.8WASHER LOCK SPRING 5/16 PLTWASHER FLAT 5/16 USS PLTRING SNAP 1 3/8 EXT 5100-137GEARBOX 40HP 1:1.462 SPEEDUPGBOX RC16 1.38 RD.1:1.93 8C312-851D312-850D802-155C327-183H326-268HGEARBOX 30HP 1:1.93 SPEED-UPHHCS 5/8-11X2 GR5NUT HEX WHIZ 3/8-16 PLTGAUGE WHEEL SUPPORT FLATGAUGE WHEEL ADJ. FLATRHSNB 3/8-16X1 1/4 GR5TAILWHEEL A-ARM WLDMTRPBY 327-183H07/13/20RevisionS/N 927108 S/N 927108 S/N 927108 S/N 927108 S/N 927108 S/N 927107-RCR1542 S/N 927108 RCR1542 S/N 927108 RCR1542 S/N 927108 RCR1542 S/N 927108 RCR1542 S/N 927108 RCR1542 S/N 927107S/N 689802 S/N 927108 S/N 689802 S/N 927108 S/N 689802 S/N 927108 S/N 689802 S/N 927108 S/N 689802 S/N 927108 S/N 689802 S/N 927107RCR1548 S/N 689801- Or Order2Ea. of 312-849D & RCR1560RCR1572RCR1660 S/N 927108 RCR1660 S/N 927108 RCR1660 S/N 927108 RCR1660 S/N 927108 RCR1660 S/N 927108 RCR1660 S/N 927107RCR1672 S/N 927108 RCR1672 S/N 927108 RCR1672 S/N 927108 RCR1672 S/N 927108 RCR1672 S/N 927108 RCR1672 S/N 927107-Replaced with 837-101CUsed only on 826-018CRCR1560, & RCR1572RCR1542 & RCR1548 (S/N377869 )RCR1542 & RCR1548 (S/N 377868-)RCR1542 & RCR1548Obsolete (RCR1542 & RCR1548)RCR1542, RCR1548, RCR1560 & RCR1572 Rotary Cutter 312-556P23

Table of Contents Part Number IndexDeck and Hitch with Blade Drive S/N 961386- (continued)Land PrideSection 2: DecksApplies to RCR1542, RCR1548, RCR1560, RCR1572Ref. Part No.Part DescriptionComm

Ref. Part No. Part Description Comments Revision Dwg 30270rcr Drawing Image Number 1. 312-082D RPBY 312-808D QTY 2 As Required S/N 776426-1. 312-075D BLADE SPACER 16 GA.064 THICK As Required S/N 776426- 1. 312-089D BLADE SPACER 20 GA. .0.04 THICK As Required S/N 776426- 1. 312-808D BLADE SPACER 24GA. .0.03 THICK As Required S/N 776426- 60" Unit Includes 2 ea. of items 4 thru

Related Documents:

The laser cutter is a potentially dangerous machine. The most common safety risk while using the laser cutter comes from fire. The laser cutter can also produce dangerous fumes (e.g., chlorine), if used with improper materials. Operators must receive training prior to use of the laser cutter. The cutter must remain under constant supervision .

Length 6" Style SDS PLUS Useable Length 4" Cutter Geometry 2 Cutter Height 0.5" Width 0.5" Overview Milwaukee M/2 2 Cutter SDS Plus Rotary Hammer Drill bits are the Most Durable 2 Cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard .

Olfa Rotary Cutter 2 The blade end of the device is 5 cm wide and the opposite (handle) end of the device is 2.7 cm wide. It is approximately 1.5 cm in height (see Figure 3). A note about orientation: Figures 1 and 2 show the top of the device.Figure 3 shows the side and Figure 4 shows the bottom of the device. 2 Main Components of the Olfa Rotary Cutter

Traditionally, spiral bevel gear teeth are cut by a circular cutter. In general machining it may call a “fly cutter”. But the gear cutter has, not one, but may blades attached to a disc cutter head. The distance from the cutter to the axis of the tool rotation determines the curvature of the tooth line on the finished gear.

4. CUTTER WHEEL CONTROL: To start the cutter wheel, hold down the thumb button on the control handle. Then pull the trigger back. After the wheel is started, the thumb button can be released, but the trigger must be held to keep the cutter wheel turned on. To raise the cutter head, pull the cutter height control bar back.

Using the Techno Plasma Cutter About the Techno CNC Plasma Cutter The plasma cutter used in this book is a Techno CNC Plasma Cutter with a Hypertherm Powermax 45 torch and a moving gantry. This means that the part of the machine that holds the torch, the gantry, moves instead of the table. This saves space, and in many cases, increases speed and

Cutter Replacement Parts Item Number Description Part Number Kit Quantity 1 Kit Option Cutter ZM400 79841 1 1 Kit Option Cutter ZM600 79842 1 2 Kit Replacement Static Brush & Cutter Guard with the Angled End Sensor Flag (old design) ZM400. Order this replacement item if the printer currently has an Angled End cutter guard installed. 79864M 1 2

RCP2660,RCP3060, RCPM2660 & RCPM3060 Parallel Arm Rotary Cutter 316-111P