Resistance Temperature Detectors - Durex Industries
Resistance TemperatureDetectorsINTRODUCTIONSensorsFor high-accuracy temperature measurements in a variety of industrial and commercial air and gas applications,Durex Industries offers RTD’s of multiple elements and styles. Durex RTD’s are available with an assortmentof connections, mounting hardware, and enclosures to suit harsh chemical, immersion, and other heavy-dutyrequirements. Sealed leadwire transitions eliminate contamination. Multiple sensing elements can be located atvarious points for precise temperature control.Design Features:Typical Applications: Platinum, Nickel, or Nickel Iron elements Food Service 2, 3, or 4-wire styles Semiconducting High pressure applications up to 5000 psi Packaging Optional sanitary-grade stainless steel hardware Hot Melt Dispensing Temperatures up to 1500 F (816 C) Vacuum Sealing and Forming Optional braiding or armor cable shielding Automotive Medical / Laboratory Settings190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-34681
Resistance TemperatureDetectorsSPECIFICATIONSUnless otherwise specified, Durex’s RTD assemblies include photo-lithographically structured, high-purity platinumthin-film elements laser trimmed to precise resistance values. These sensors feature brief response times, excellentlong term stability, low self heating and excellent resistance to vibration and temperature shocks.Thermal Response TimeThe response time T0.63 is the time the sensors need to respond to 63% of the change in temperature.The response time depends on the sheath dimensions, but can be as low as 1.2 seconds.Long Term StabilityThe change of ohmage after 1,000 hours at maximum operating temperature amounts to less than 0.03%.Self HeatingTo measure the resistance, an electric current has to flow through the element, which will generate heat energyresulting in errors of measurement. To minimize error, the testing current should be kept low (approximately 1mAfor Pt-100).Temperature error ΔT RI²/E with:E self-heating coefficient in mW/KR resistance in kΩI measuring current in mAThe self-heating coefficient (E) for the standard elements used in Durex RTD assemblies is 4 mW/K in air and40 mW/K in water.Measuring CurrentThe amount of thermal transfer from the sensor in the application determines how much measuring current can beapplied. There is no bottom limit of the measurement current with platinum thin-film. The measurement currentdepends highly on the application in use.We recommend at:100Ω: typically 1mA, maximum 5mASensorsMeasurement current causes heating of the platinum thin-film sensor. The resulting temperature error is given by:ΔT P/E with the power loss P I2R, and the self-heating coefficient E in mW/K.500Ω: typically 0.5mA, maximum 3mA1000Ω: typically 0.3mA, maximum 2mA2000Ω: typically 0.2mA, maximum 1mANominal ValuesThe nominal or rated value of the sensor is the target value of the sensor resistance at 0 C. The temperature coefficientα is defined as α R100 - R0 (K-1) and has the numerical value of 0.00385 K-1 according to DIN IEC 751.100 - R0R - R0In practice, a value multiplied by 106 is often entered: TCR 106 x 100x (ppm/K)100 - R0In this case, the numerical value is 3850 ppm/K.190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-34682
Resistance TemperatureDetectorsSPECIFICATIONSTemperature Characteristic CurveThe temperature characteristic curve determines the dependence of the electrical resistivity on the temperature. Thefollowing definition of the temperature curve according to DIN EN 60751 standard applies:-200 to 0 CR(t) R0[1 (A*t) (B*t2) C(t-100)t3]0 to 250 CR(t) R0[1 (A*t) (B*t2)]3Platinum (3850 ppm/K):A 3.9083 * 10-3 [ C-1]B -5.775 * 10-7 [ C-2]C -4.183 * 10-12 [ C-4]Bt[K]21Platinum (3750 ppm/K):A 3.9083 * 10-3 [ C-1]B -6.01888 * 10-7 [ C-2]C -6 * 10-12 [ C-4]AYR0 Resistance value in ohm at 0 Ct temperature in accordance with ITS 90-200-1000100200t[ C]300400500600Tolerance FieldTolerance ClassesThe temperature sensors are divided into classes according to their limit deviations:ClassDIN 60751, class BDIN 60751, class A⅓ DIN 60751, class B limit deviations in C (K)0.30 0.005 x T 0.15 0.002 x T 0.10 0.0017 x T IST AG designationBAYTemperature range-200 C to 850 C-90 C to 300 C-50 C to 150 C T is the numerical value of the temperature C without taking into account either negative or positive signs.Special selection of sensors upon request (pairings, groupings, special tolerances).Durex RTD calibrations are fully traceable to the National Institute of Standards and Technology (NIST) andare useful for defining the exact temperature coefficient of the sensor. For sensor applications below 32 F (0 C),a cryogenic range calibration is recommended. Certificates are supplied with all calibrations. Printed tables ofinterpolated values are only supplied with cryogenic range calibrations.SensorsCalibration ServicesRTD Assembly Temperature RangesStyle: R1L, R2L,R3L, R4LStyle: R1M, R2M,R3M, R4MStyle: R1P, R2P,R3P, R4PThe maximum rated temperature for these four styles is 500 F. Typically they are constructedwith Teflon leads and the lead end is protected with an epoxy seal. This epoxy seal provides amoisture resistant barrier.The maximum rated temperature for these next four styles is 900 F. They are constructed withhigh temperature fiberglass insulated conductors. The lead end is sealed and protected with ahigh temperature cement.The maximum rated temperature for these last four styles is 1200 F. Their constructionfeatures highly compacted magnesium oxide insulation. Nickel conductors provide forextended temperature ratings and harsh environments.190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-34683
Resistance TemperatureDetectorsSPECIFICATIONSAvailable RTD ElementsCodeABCDEFGHJKElement Type100 ohm Platinum100 ohm Platinum100 ohm Platinum500 ohm Platinum1000 ohm Platinum2000 ohm Platinum100 ohm Platinum100 ohm Platinum120 ohm Nickel604 ohm Nickel IronTemperature 392.00392.00672.00520Tolerance at 0 C.1%.06%.03%.1%.1%.1%.1%.03%.5%.5%Wiring DiagramsMR2R2The meter reads RT the twolead resistances RL1 and RL24 Wire, CompensatedWheatstone BridgeRL4MMRL2One lead resistance is included ineach of the two arms of the bridge.The errors reduce to RL1 - RL22 WireF A6 13 WireB2C A3 1B D2 44 Wire, ConnectedSupplyRL2RL1E5RL3RL1RTInternal Wiring DiagramABC AB123 12In this type RL3 and RL4 appear in onearm of the bridge. RL1 and RL2 appearin the other. Errors are RL1 RL2-RL3-RL4High ImpedanceVoltage Measurement4 Wire Compensated4 Wire ConnectedErrors can be made negligible by havinga very high input impedance amplifier.SensorsRL2R1SupplyRL13 Wire, Wheatstone BridgeRL3SupplyRTSupply2 Wire, Wheatstone BridgeCode Definitions“L” Dimensions“B” Dimensions“L” dimensions are specified in whole “B” dimensions are specified ininches and a single alpha characterfractions from ⅛” to 1”. Use thewhich represents a fraction. Enter the single alpha character to indicatethree digit code as follows:the tip length. Enter the code asfollows:3”03010 ⅝”10K4 ½”04H12”120⅛”B⅝”K6 ¼”06D15 ⅜”15F¼”D¾”M7 ⅞”07P17 ¾”17M⅜”F⅞”P9 ⅝”09K22 ⅛”22B½”H1”S“A” DimensionsFractional DimensionLetter Code¹/₁₆”⅛”“A” dimensions arespecified in whole inches only. ³/₁₆”Enter the three digit code ”ABCDEFGHJK¹¹/₁₆”L¾”M¹³/₁₆” N⅞”P¹⁵/₁₆”R1”S0NoFraction190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-34684
Resistance TemperatureDetectorsRTD WITH LEADWIRE“L” DimensionSpecify in inches.(Enter 10H for 10 ½”)“A” DimensionSpecify in inches(Enter 100 for 100”)¼” Stripped LengthDiameterSTYLE R1L R1MR1L - Maximum Temperature 500 FR1M - Maximum Temperature 900 FTable 1: Element Type100 ohm .00385 Curve Class B Platinum100 ohm .00385 Curve Class A Platinum500 ohm .00385 Curve Class B Platinum1000 ohm .00385 Curve Class B Platinum100 ohm .00392 Curve Class B Platinum120 ohm .00672 Curve Nickel (R1L Only)604 ohm .00520 Curve Nickel Iron (R1L Only)CodeABCDETable 2: Wiring ConfigurationSingle, 2 WireSingle, 3 Wire (Minimum sheath diameter .156”)Single, 4 Wire (Minimum sheath diameter .188”)Dual, 4 Wire (Minimum sheath diameter .188”)Dual, 6 Wire (Minimum sheath diameter .250”)Code468Table 3: Sheath Material304 Stainless Steel316 Stainless SteelInconel 600CodeBVCDFTable 4: Sheath Diameter.125” or ⅛” O.D.156” or ⁵/₃₂” O.D.188” or ³/₁₆” O.D.250” or ¼” O.D.375” or ⅜” O.D.CodeTable 5: Sheath Length (“L” Dimension)Specify in inches. See table on page 4 for codes.CodeTable 6: Lead Length (“A” Dimension)Specify in inches. See table on page 4 for codes.-R1L or R1MABTable 1Table 2Table 7: Leadwire TypeStranded Fiberglass SinglesStranded Fiberglass with Overall Fiberglass JacketStranded Fiberglass with Stainless Steel OverbraidStranded Fiberglass with Stainless Steel ArmorStranded Mica/Fiberglass SinglesStranded Teflon Singles (R1L Only)Stranded Teflon with Overall Teflon Jacket (R1L Only)Stranded Teflon with Stainless Steel Overbraid (R1L Only)Stranded Teflon with Stainless Steel Armor (R1L Only)PVC with Mylar Shield (R1L Only)Code0123ABCDMXTable 8: Terminations2” Split Ends#6 Spade LugBX Connector with #6 Spade LugStandard Plug³/₁₆” Quick Disconnect³/₁₆” Quick Disconnect, Insulated¼” Quick Disconnect¼” Quick Disconnect, InsulatedMini PlugSpecial, SpecifyCode0NPRSVXTable 9: Fitting OptionsNo Fitting⅛” NPT Compression, Brass⅛” NPT Compression, Stainless Steel¼” NPT Compression, Brass¼” NPT Compression, Stainless Steel½” NPT Compression, Stainless SteelSpecial, SpecifyR1L-AB-4F100-100FCRPart Number able 3Table 4Table 5-100FCRTable 6Table 7Table 8Table 9WiringSheathSheath “L” Sheath “A” Lead Leadwire Terminations FittingSensor Type ElementType Configuration Material Diameter LengthLengthTypeOptions& Style No.190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-34685
Resistance TemperatureDetectorsHIGH TEMPERATURE RTD WITH LEADWIRE“A” DimensionSpecify in inches.(Enter 100 for 100”)1”StandardSTYLE R1PR1P - Maximum Temperature 1200 F¼” Stripped LengthCodeABDEGTable 1: Element Type100 ohm .00385 Curve Class B Platinum100 ohm .00385 Curve Class A Platinum500 ohm .00385 Curve Class B Platinum1000 ohm .00385 Curve Class B Platinum100 ohm .00392 Curve Class B PlatinumCodeABCDETable 2: Wiring ConfigurationSingle, 2 WireSingle, 3 Wire (Minimum sheath diameter .156”)Single, 4 Wire (Minimum sheath diameter .188”)Dual, 4 Wire (Minimum sheath diameter .188”)Dual, 6 Wire (Minimum sheath diameter .250”)Code468Table 3: Sheath Material304 Stainless Steel316 Stainless SteelInconel 600CodeBVCDFTable 4: Sheath Diameter.125” or ⅛” O.D.156” or ⁵/₃₂” O.D.188” or ³/₁₆” O.D.250” or ¼” O.D.375” or ⅜” O.D.CodeTable 5: Sheath Length (“L” Dimension)Specify in inches. See table on page 4 for codes.CodeTable 6: Lead Length (“A” Dimension)Specify in inches. See table on page 4 for codes.R1P-AATable 1Table 20.188” Dia.Grounded JunctionCodeABCDETable 7: Leadwire TypeStranded Fiberglass SinglesStranded Fiberglass with Overall Fiberglass JacketStranded Fiberglass with Stainless Steel OverbraidStranded Fiberglass with Stainless Steel ArmorStranded Mica/Fiberglass SinglesCode0123ABCDMXTable 8: Terminations2” Split Ends#6 Spade LugBX Connector with #6 Spade LugStandard Plug³/₁₆” Quick Disconnect³/₁₆” Quick Disconnect, Insulated¼” Quick Disconnect¼” Quick Disconnect, InsulatedMini PlugSpecial, SpecifyCode0NPRSVXTable 9: Fitting OptionsNo Fitting⅛” NPT Compression, Brass⅛” NPT Compression, Stainless Steel¼” NPT Compression, Brass¼” NPT Compression, Stainless Steel½” NPT Compression, Stainless SteelSpecial, SpecifyR1P-AA-4B09H-072ECRPart Number SequenceR1P“L” DimensionSpecify in inches.(Enter 10H for 10 ½”)Sensors2”Standard-4B09HTable 3Table 4Table 5-072ECRTable 6Table 7Table 8Table 9WiringSheathSheath “L” Sheath “A” Lead Leadwire Terminations FittingSensor Type ElementType Configuration Material Diameter LengthLengthTypeOptions& Style No.190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-34686
Resistance TemperatureDetectors“L” DimensionSpecify in inches.(Enter 10H for 10 ½”)Diameter“A” DimensionSpecify in inches.(Enter 100 for 100”)“L” DimensionSpecify in inches.(Enter 10H for 10 ½”)Diameter“A” DimensionSpecify in inches.(Enter 100 for 100”)R2L - Maximum Temperature 500 FSTYLE R2L, R2M or R2PR2M - Maximum Temperature 900 FCodeABDEGJKTable 1: Element Type100 ohm .00385 Curve Class B Platinum100 ohm .00385 Curve Class A Platinum500 ohm .00385 Curve Class B Platinum1000 ohm .00385 Curve Class B Platinum100 ohm .00392 Curve Class B Platinum120 ohm .00672 Curve Nickel (R2L Only)604 ohm .00520 Curve Nickel Iron (R2L Only)CodeABCDETable 2: Wiring ConfigurationSingle, 2 WireSingle, 3 Wire (Minimum sheath diameter .156”)Single, 4 Wire (Minimum sheath diameter .188”)Dual, 4 Wire (Minimum sheath diameter .188”)Dual, 6 Wire (Minimum sheath diameter .250”)Code468Table 3: Sheath Material304 Stainless Steel316 Stainless SteelInconel 600CodeBVCDFTable 4: Sheath Diameter.125” or ⅛” O.D.156” or ⁵/₃₂” O.D.188” or ³/₁₆” O.D.250” or ¼” O.D.375” or ⅜” O.D.CodeTable 5: Sheath Length (“L” Dimension)Specify in inches. See table on page 4 for codes.CodeTable 6: Lead Length (“A” Dimension)Specify in inches. See table on page 4 for codes.Part Number Sequence R2P-EB-4V12F-018E1CCR2P-R2L, R2M, R2PSensor Type& Style No.EBTable 1Table 22” Standard1”-2” Standard1”R2P - Maximum Temperature 1200 FCodeABCDEFGJKMTable 7: Leadwire TypeStranded Fiberglass SinglesStranded Fiberglass with Overall Fiberglass JacketStranded Fiberglass with Stainless Steel OverbraidStranded Fiberglass with Stainless Steel ArmorStranded Mica/Fiberglass SinglesStranded Teflon Singles (R2L Only)Stranded Teflon with Overall Teflon Jacket (R2L Only)Stranded Teflon with Stainless Steel Overbraid (R2L Only)Stranded Teflon with Stainless Steel Armor (R2L Only)PVC with Mylar Shield (R2L Only)Code12Table 8: Spring Loaded OptionsFixed FittingSpring Loaded FittingCode0123ABCDMXTable 9: Terminations2” Split Ends#6 Spade LugBX Connector with #6 Spade LugStandard Plug³/₁₆” Quick Disconnect³/₁₆” Quick Disconnect, Insulated¼” Quick Disconnect¼” Quick Disconnect, InsulatedMini PlugSpecial, SpecifyCode1256CDGHXTable 10: Fitting Options¼” NPT x ¼” NPT Brass Hex Nipple¼” NPT x ¼” NPT Stainless Steel Hex Nipple½” NPT x ½” NPT Brass Hex Nipple½” NPT x ½” NPT Stainless Steel Hex Nipple¼” NPT Brass Bushing¼” NPT Stainless Steel Bushing½” NPT Brass Bushing½” NPT Stainless Steel BushingSpecial, Specify4V12FTable 3Table 4Table 5-SensorsRTD WITH FIXED FITTING018E1CCTable 6Table 7Table 8Table 9Table 10WiringSheath “L” Sheath “A” Lead Leadwire Spring Terminations FittingSheathElementLengthTypeLoadingOptionsType Configuration Material Diameter Length190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-34687
Resistance TemperatureDetectorsRTD WITH PLUG“L” DimensionSpecify in inches(Enter 100 for 100”)STYLE R3L, R3M or R3PR3L - Maximum Temperature 500 FR3M - Maximum Temperature 900 FR3P - Maximum Temperature 1200 FCrimp Adapter StandardCodeABDEGJKTable 1: Element Type100 ohm .00385 Curve Class B Platinum100 ohm .00385 Curve Class A Platinum500 ohm .00385 Curve Class B Platinum1000 ohm .00385 Curve Class B Platinum100 ohm .00392 Curve Class B Platinum120 ohm .00672 Curve Nickel (R3L Only)604 ohm .00520 Curve Nickel Iron (R3L Only)CodeBVCDFCodeABCDETable 2: Wiring ConfigurationSingle, 2 WireSingle, 3 Wire (Minimum sheath diameter .156”)Single, 4 Wire (Minimum sheath diameter .188”)Dual, 4 Wire (Minimum sheath diameter .188”)Dual, 6 Wire (Minimum sheath diameter .250”)CodeCode468Code57JKMXTable 3: Sheath Material304 Stainless Steel316 Stainless SteelInconel 600Part Number Sequence-Table 5: Sheath Length (“L” Dimension)Specify in inches. See table on page 4 for codes.Table 6: TerminationsStandard Plug with Crimp ConnectorStandard Plug with Tube AdapterOpen Disk Block, CeramicOpen Disk Block, Glass FiberMini Plug with Crimp AdapterSpecial, SpecifyR3L-BB-6F100-5BBR3L, R3M, R3PTable 1Sensor Type& Style No.ElementTypeR3LTable 4: Sheath Diameter.125” or ⅛” O.D.156” or ⁵/₃₂” O.D.188” or ³/₁₆” O.D.250” or ¼” O.D.375” or ⅜” O.D.SensorsDiameter--6F1005Table 2Table 3Table 4Table 5Table �L” SheathLengthTerminations190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-34688
Resistance TemperatureDetectorsRTD WITH TERMINAL HEAD“L” DimensionSpecify in inches(Enter 100 for 10”)STYLE R4L, R4M or R4PR4L - Maximum Temperature 500 FR4M - Maximum Temperature 900 FR4P - Maximum Temperature 1200 FTable 1: Element Type100 ohm .00385 Curve Class B Platinum100 ohm .00385 Curve Class A Platinum500 ohm .00385 Curve Class B Platinum1000 ohm .00385 Curve Class B Platinum100 ohm .00392 Curve Class B Platinum120 ohm .00672 Curve Nickel (R4L Only)604 ohm .00520 Curve Nickel Iron (R4L Only)CodeABCDETable 2: Wiring ConfigurationSingle, 2 WireSingle, 3 Wire (Minimum sheath diameter .156”)Single, 4 Wire (Minimum sheath diameter .188”)Dual, 4 Wire (Minimum sheath diameter .188”)Dual, 6 Wire (Minimum sheath diameter .250”)Code468CodeBVCDFCodeTable 3: Sheath Material304 Stainless Steel316 Stainless SteelInconel 600Table 4: Sheath Diameter.125” or ⅛” O.D.156” or ⁵/₃₂” O.D.188” or ³/₁₆” O.D.250” or ¼” O.D.375” or ⅜” O.D.ER4L, R4M, R4P Table 1Sensor Type& Style No.ATable 2Code12Table 7: Spring Loaded OptionsFixed FittingSpring Loaded FittingCodeTable 8: Terminal HeadsA½” NPT Conduit, Aluminum HeadB¾” NPT Conduit, Aluminum HeadC½” NPT Conduit, Cast Iron HeadD¾” NPT Conduit, Cast Iron HeadM¼” NPT Conduit Connection, Miniature Plastic HeadP½” NPT Conduit, Grey Delrin HeadR¾” NPT Conduit, Grey Delrin HeadW½” NPT Conduit, White Polypropylene HeadV¾” NPT Conduit, White Polypropylene HeadZ½” NPT Conduit, Explosion Proof Aluminum HeadY¾” NPT Conduit, Explosion Proof Aluminum HeadTable 9: Fitting OptionsNo Fitting⅛” NPT Compression, Brass⅛” NPT Compression, Stainless Steel¼” NPT Compression, Brass¼” NPT Compression, Stainless Steel½” NPT Compression, Stainless SteelSpecial, SpecifyR4L-EA-4C060-62ARPart Number Sequence-Table 6: Process Connections½” NPT Stainless Steel Hex Nipple¾” NPT Stainless Steel Hex NippleCode0NPRSVXTable 5: Sheath Length (“L” Dimension)Specify in inches. See table on page 4 for codes.R4LCode68SensorsCodeABDEGJK-4C060Table 3Table 4Table 5-62ARTable 6Table 7Table 8Table 9ElementWiringSheathSheath “L” SheathProcessSpring Terminal FittingType Configuration Material Diameter Length Connections LoadingHeadOptions190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-34689
Resistance TemperatureDetectorsMELT BOLT RTDDurex melt bolts are designed for dependable temperature measurement of the plastic melt stream within extrudersand injection molding equipment. Standard assemblies are supplied with mineral insulated sensing elements forextended pressure and temperature performance. For options at the probe tip there are thermal barriers ofTeflon (500 F) and Mycalex (900 F) available upon on½” 20 UNF2A Thread¾” Hex Head“B”“A”Dimension½” 20 UNF2A Thread¾” Hex Head“A”Dim.“L”Dimension½”“B”½” 20 UNF2A �” 20 UNF2A Thread¾” Hex ” 20 UNF2A Thread¾” Hex HeadRM4CodeABDEG½” 20 UNF2A Thread¾” Hex “L”Dimension¾” Hex HeadRM01 ½”½”RM5Table 1: Element Type100 ohm .00385 Curve Class B Platinum100 ohm .00385 Curve Class A Platinum500 ohm .00385 Curve Class B Platinum1000 ohm .00385 Curve Class B Platinum100 ohm .00392 Curve Class B PlatinumCodeABCDETable 2: Wiring ConfigurationSingle, 2 WireSingle, 3 Wire (Minimum sheath diameter .156”)Single, 4 Wire (Minimum sheath diameter .188”)Dual, 4 Wire (Minimum sheath diameter .188”)Dual, 6 Wire (Minimum sheath diameter .250”)Sensors1 ½”Part Number Sequence RM1-EA-030-S024LRM1RM0 - RM5ETable 1ATable 2Sensor Type& Style No.ElementTypeWiringConfiguration--S“B” Dim.024“A” Dim.LOperating Temp.030 3” / 040 4”060 6”See Page4See Page4L 500 FM 900 F030“L” Dim.“L” Dimension“L” Dimension3”4”6”Blank Bolts½”-20 UNF2A Thread2 ³/₁₆”.500” Dia.½”Part Number244008244053244009Blank Bolts occupy hole when Melt Bolt is removed.190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-346810
Resistance TemperatureDetectorsSURFACE MOUNT RTDS“A” DimensionSpecify In InchesEnter 014 for 14”2”Standard¼”StrippedLengthSTYLE RSM1Heavy Duty Surface Mount“A” DimensionSpecify In InchesEnter 014 for 14”1”¼”StrippedLength1”¼” Thick1”Epoxy SealSTYLE RSM2Surface Mount2”Standard“A” DimensionSpecify In InchesEnter 014 for 14”1”¼”StrippedLengthPadLengthPad WidthSTYLE RSM3Adhesive PatchCodeABDEGTable 1: Element Type100 ohm .00385 Curve Class B Platinum100 ohm .00385 Curve Class A Platinum500 ohm .00385 Curve Class B Platinum1000 ohm .00385 Curve Class B Platinum100 ohm .00392 Curve Class B PlatinumCodeABCDETable 2: Wiring ConfigurationSingle, 2 WireSingle, 3 Wire (Minimum sheath diameter .156”)Single, 4 Wire (Minimum sheath diameter .188”)Dual, 4 Wire (Minimum sheath diameter .188”)Dual, 6 Wire (Minimum sheath diameter .250”)CodeBF40Table 3: Pad MaterialBrassFiberglass304 Stainless SteelNoneCode06H00M000Table 5: Pad Width6.5” LGStandard (.750”)No PadCode06H010000-ARSM1, RSM2, RSM3 Table 1CodeTable 7: Lead Length (“A” Dimension)Specify in inches. See table on page 4 for codes.CodeABEFJKMTable 4: Pad Thickness³/₁₆” (.188”)¼” (.250”)½” (.500”)NoneTable 6: Pad Length6.5” LongStandard (1”)No PadBTable 2RSM1-AB-BD00M010-060F3A-BDTable 3Table 400MTable 8: Leadwire TypeStranded Fiberglass SinglesStranded Fiberglass with Overall Fiberglass JacketStranded Mica/FiberglassStranded Teflon SinglesStranded Teflon with Stainless Steel OverbraidStranded Teflon with Stainless Steel ArmorPVC with Mylar ShieldCode0123MXTable 9: Terminations2” Split Ends#6 Spade LugBX Connector with #6 Spade LugStandard PlugMini PlugSpecial, SpecifyCodeABCDEPTable 10: Mounting HoleNo. 6 Stud Size, .144” Hole DiameterNo. 6 Stud Size, . 169” Hole DiameterNo. 10 Stud Size, . 196” Hole Diameter¼” Stud Size, .266” Hole Diameter⅜” Stud Size, .390” Hole DiameterPatch010 -Table 5 Table 6SensorsCodeCDH0Part Number SequenceSensor Type& Style No.Epoxy SealPad Width2”StandardRSM1PadLength060F3ATable 7Table 8Table 9Table 10Pad Leadwire Leadwire Terminations MountingWiringPadPadPadElementHoleTypeType Configuration Material Thickness Width Length Length190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-346811
Resistance TemperatureDetectorsRTD THERMOWELLSInsertion Length3”Tol. ½”Black PipeNipple½” x ½” ClosedNipple FittingSTYLE RW1STYLE RW28”Tol. 1”Insertion LengthCodeABDEGJKTable 1: Element Type100 ohm .00385 Curve Class B Platinum100 ohm .00385 Curve Class A Platinum500 ohm .00385 Curve Class B Platinum1000 ohm .00385 Curve Class B Platinum100 ohm .00392 Curve Class B Platinum120 ohm .00672 Curve Nickel604 ohm .00520 Curve Nickel IronCodeABCDETable 2: Wiring ConfigurationSingle, 2 WireSingle, 3 Wire (Minimum sheath diameter .156”)Single, 4 Wire (Minimum sheath diameter .188”)Dual, 4 Wire (Minimum sheath diameter .188”)Dual, 6 Wire (Minimum sheath diameter .250”)CodeKY4Table 5: Process Connection MaterialBlack Pipe, Schedule 40Galvanized Pipe, Schedule 40304 Stainless SteelCode12Table 6: Spring Loaded OptionsFixed FittingSpring Loaded FittingCodeTable 7: Terminal HeadsTable 3: Thermowell NumberSee next page for Thermowell Code NumbersCode46Table 4: Well Material304 Stainless Steel316 Stainless SteelPart Number SequenceRW3-RW1, RW2, RW3Sensor Type& Style No.A½” NPT Conduit, Aluminum HeadB¾” NPT Conduit, Aluminum HeadC½” NPT Conduit, Cast Iron HeadD¾” NPT Conduit, Cast Iron HeadM¼” NPT Conduit Connection, Miniature Plastic HeadP½” NPT Conduit, Grey Delrin HeadR¾” NPT Conduit, Grey Delrin HeadW½” NPT Conduit, White Polypropylene HeadV¾” NPT Conduit, White Polypropylene HeadZ½” NPT Conduit, Explosion Proof Aluminum HeadY¾” NPT Conduit, Explosion Proof Aluminum HeadSensorsNipple, Union, Nipple - Black PipeSchedule 40 StandardSTYLE RW3CodeInsertion LengthRW3-AB-5302H4-K2DABTable 1Table 2-5302H4Table DTable 4Table 5Table 6Table 7WellMaterialProcess ConnectionMaterialSpringLoadingTerminalHead190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-346812
Resistance TemperatureDetectorsRTD THERMOWELLS1 ance“T” Dim.¾”1”Specify 2” or 3”Insertion Length “U” Dimension2 ½”¼”Insertion Length “U” Dim.2 ½”¼”½” Dia.½”, ¾” or 1” NPT Thread⅝”, ¾” or ⅞” Dia.260” .002” Bore Dia.½” NPT Thread½”, ¾” or 1” NPT ThreadStandard Well - Stepped Shank“U” Dim.2 ½”4 ½”6”7 ½”10 ½”12”16 ½”22 ½”½” NPT1202H1204H120601207H1210H121201216H1222H1 ¾”ThreadAllowance1”⅝”, ¾” or ⅞” Dia. .260” .002” Bore Dia.Lagging Extension Well - Stepped Shank¾” NPT1302H1304H130601307H1310H131201316H1322H1” NPT1402H1404H140601407H1410H141201416H1422H“U” Dim.2 ½”4 ½”6”7 ½”10 ½”12”16 ½”22 ½”WrenchAllowance¾”Insertion Length“U” Dimension½” NPT2202H2204H220602207H2210H221202216H2222H“T” Dim.Specify 2” or 3”¼”¾” llowance1”1” on Length“U” Dimension¼”/64” or ⅞” Dia.49½” NPT Thread¾” or 1” NPT Thread.385” .002” Bore Dia./64” or ⅞” Dia.49½” NPT ThreadStandard Well - Straight Shank“U” Dim.2 ½”4 ½”6”7 ½”10 ½”12”16 ½”22 ½”1 ¾”ThreadAllowance1”¾” NPT3302H3304H330603307H3310H331203316H3322H1” on Length“U” Dimension⅞” or 1 ¹/₁₆” Dia.¾” or 1” NPT Thread.385” .002” Bore Dia.Lagging Extension Well - Straight Shank“U” Dim.2 ½”4 ½”6”7 ½”10 ½”12”16 ½”22 ½”WrenchAllowance¾”¼”“T” Dim.Specify 2” or 3”¾” NPT4302H4304H430604307H4310H431204316H4322H1” on LengthThread“U” DimensionAllowance⅞” or 1 ¹/₁₆” Dia.1”⅝” or ⁴⁹/₆₄” Dia.½” NPTThread¾” or 1” NPT Thread“U” Dim.2 ½”4 ½”6”7 ½”10 ½”12”16 ½”22 ½”.260” or .385” .002” Bore Dia.Standard Well - Tapered Shank¾” NPT.260” Bore.385” 310H53120631205316H6316H5322H6322H1” NPT.260” Bore.385” 410H54120641205416H6416H5422H6422HSensors½” NPT Thread½” Dia.¼”⅝” or ⁴⁹/₆₄” Dia.½” NPTThread“U” Dim.2 ½”4 ½”6”7 ½”10 ½”12”16 ½”22 ½”¾” or 1” NPT Thread.260” or .385” .002” Bore Dia.Lagging Extension Well - Tapered Shank¾” NPT.260” Bore.385” 310H73120831207316H8316H7322H8322H1” NPT.260” Bore.385” 410H74120841207416H8416H7422H8422H190 Detroit Street, Cary, Illinois 60013 Phone: 847-639-5600 Fax: 847-639-2199 Web: www.durexindustries.com TOLL FREE: 800-762-346813
Resistance TemperatureDetectorsHAND HELD RTDS“A” DimensionSpecify In InchesEnter 012 for 12”¼”StrippedLength2”Standard“L” DimensionSpecify In InchesEnter 04H for 4 ½”2 ¾”STYLE RN1 Stainless Steel Handle with Armor Protection (Smokehouse)“A” DimensionSpecify In InchesEnter 012 for 12”¼”StrippedLength2”Standard“L” DimensionSpecify In InchesEnter 04H for 4 ½”3 ½”STYLE RN2 General Purpose Hand Held“L” DimensionSpecify In InchesEnter 04H for 4 ½”3 ½”Extended Length, 48” to 60”Retracted Lenght, 12”Silicone Rubber Retractable Coil(400 F Service)STYLE RN3 (Single, 2 Wire Configuration Only)³/₁₆” Stainless Steel SheathTeflon HandleTable 1: Element Type100 ohm .00385 Curve Class B Platinum100 ohm .00385 Curve Class A Platinum500 ohm .00385 Curve Class B Platinum1000 ohm .00385 Curve Class B Platinum100 ohm .00392 Curve Class B Platinum120 ohm .00672 Curve Nickel604 ohm .00520 Curve Nickel IronCodeCJKMRSTable 6: Leadwire TypeFiberglass Leadwire with Stainless Steel OverbraidTeflon Leadwire with Stainless Steel OverbraidTeflon Leadwire with Stainless Steel ArmorPVC Leadwire with Mylar ShieldCoiled PVC Cord (Single 2 Wire Only)Coiled Silicone Rubber Cord (Single 2 Wire Only)CodeABCDETable 2: Wiring ConfigurationSingle, 2 WireSingle, 3 Wire (Minimum sheath diameter .156”)Single, 4 Wire (Minimum sheath diameter .188”)Dual, 4 Wire (Minimum sheath diameter .188”)Dual, 6 Wire (Minimum sheath diameter .250”)CodeRPASTable 7: Tip ConfigurationRoundPiercingAir TemperatureSurfaceCodeBVCDTable 3: Sheath Diameter.125” or ⅛” O.D.156” or ⁵/₃₂” O.D.188” or ³/₁₆” O.D.250” or ¼” O.D.Code0123ABCDMXTable 8: Terminations2” Split Ends#6 Spade LugBX Connector with #6 Spade LugStandard Plug³/₁₆” Quick Disconnect³/₁₆” Quick Disconnect, Insulated¼” Quick Disconnect¼” Quick Disconnect, InsulatedMini PlugSpecial, SpecifyCodeTable 4: Sheath Length (“L” Dimension)Specify in inches. See table on page 4 for codes.CodeTable 5: Lead Length (“A” Dimension)Specify in inches. See table on page 4 for codes.SensorsCodeABDEGJKPart Number Sequence RN2-AB-C04P-036MRDRN2-RN1, RN2, RN3Sensor Type& Style No.ABTable 1Table 2-C04PTable 3Table 4-036MRDTable 5Table 6Table 7Table 8ElementWiringSheath “L” Sheath “A”
Jan 28, 2015 · Resistance Temperature Detectors 5 RTD WITH LEADWIRE “A” Dimension Specify in inches (Enter 100 for 100”) “L” Dimension Specify in inches. . STYLE R1L R1M R1L - Maximum Temperature 500 F R1M - Maximum Temperature 900 F Code Table 1: Element Type A 100 ohm .00385 Curve Class B P
Components of voice alarm systems - strong loudspeakers /strong Components using radio links Carbon monoxide detectors - point detectors Multi sensor fire detectors - point detectors using both smoke and heat detection Multi- sensor fire detectors point detectors using /p div class "b_factrow b_twofr" div class "b_vlist2col" ul li div strong File Size: /strong 2MB /div /li /ul ul li div strong Page Count: /strong 280 /div /li /ul /div /div /div
So at 0 C the resistance is 100 ohms, at 100 C resistance 138.5 ohms. JIS standard platinum has a temperature coefficient, or (α) value, of 0.003916 ohms/ohms/ C. So a 100 ohm platinum RTD will increase in resistance by 0.3916 ohms for every 1 C of temperature in-crease. So at 0 C the resistance is 100 ohms, at 100 C resistance 139. .
Intersubband n-type III-V material systems detector arrays 591 14.3. Normal incidence quantum well intersubband detectors 594 14.3.1. Si/Si, Ge intersubband normal incidence detectors 594 1-Х X 14.3.2. III-V system intersubband normal incidence detectors 597 14.4. Interband type II infrared superlattice detectors 600 14.4.1. rnSb/rnASj xSbx .
The power was located in green water. No buns puzzle some in the lead off the text. Random . model of printed word recognition, TRACE has three sets of interconnected detectors – Feature detectors – Phoneme detectors – Word detectors These detectors span different
Resistance Temperature Detectors (RTD) Resistance Temperature Detectors (RTDs) are a high quality and very accurate temperature sensor (refer to Figures 2-2-1 and 2-2-2). The Gaylord RTDs are Listed for mounting in commercial kitchen exhaust hoods. Each hood section has one or more
*Note some detectors are fitted with and EOL resistor to protect the relay this could be anything from 5 to 15Ω. If unsure check manufacturers data sheet or measure resistance across alarm terminals at detector to identify resistors value Test 2 Tamper loop resistance. Proceed as above measuring each detectors circuit resistance individually*.
Converting RTD Resistance to Temperature There are two options for converting resistance to temperature. Consulting a look-up table is workable in software programs where an event must be triggered at a specific temperature (the corresponding resistance or voltage can be used as a trigger level). T
INTRODUCTION TO FIELD MAPPING OF GEOLOGIC STRUCTURES GEOL 429 – Field Geology Department of Earth Sciences Montana State University Dr. David R. Lageson Professor of Structural Geology Source: Schmidt, R.G., 1977, Geologic map of the Craig quadrangle, Lewis and Clark and Cascade Counties, Montana: U.S. Geological Survey GQ-1411, 1:24,000. 2 CONTENTS Topic Page Introduction 3 Deliverables 4 .
