ET EtherCAT Terminals For The Extended Temperature
ET EtherCAT Terminals for the extended temperature range -25 60 CThe EtherCAT Terminal system has proven successful over a period of many years inautomation applications where a temperature range of 0 55 C is sufficient. For requirementsbeyond that, the operating temperature range of selected EtherCAT Terminals and Couplershas been extended to -25 60 C. The storage temperature of these ET components(Extended Temperature Range) has also been adapted and is now -40 85 C. The exactdefinition of the operating conditions in temperature ranges outside 0 55 C, any installationrequirements that possibly deviate from the standard and, if applicable, deviating technical datacan be found in the EtherCAT Terminal documentation.The following EtherCAT Terminals represent a selection of the products that are suitable for theextended temperature range. The extension of the temperature range is marked accordingly onthe data sheet and is also available for any variants with a pluggable wiring level (ESxxxx).ET Bus TerminalsOrdering informationEtherCAT CouplerEK1100EtherCAT Coupler for E-bus terminals (ELxxxx)EK1100-0008EtherCAT Coupler for E-bus terminals (ELxxxx), with M8screw-type connectorsEK1101EtherCAT Coupler with ID switch for E-bus terminals (ELxxxx)EK1101-0008EtherCAT Coupler with ID switch for E-bus terminals (ELxxxx) andM8 screw-type connectorsEK1101-0080EtherCAT Coupler with ID switch for E-bus terminals (ELxxxx),Fast Hot ConnectEK1110EtherCAT extensionEK1110-0008EtherCAT extension, with M8 socketEK11222-port EtherCAT junctionEK1122-00082-port EtherCAT junction, with M8 screw-type connectorsEK1122-00802-port EtherCAT junction, Fast Hot ConnectEK1501EtherCAT Coupler with ID switch, multimode fibre optic for E-busterminals (ELxxxx)EK1501-0010EtherCAT Coupler with ID switch, singlemode fibre optic for E-busterminals (ELxxxx), distance between stations up to 20 kmEK15211-port EtherCAT multi-mode fibre optic junctionEK1521-00101-port EtherCAT singlemode fibre optic junction, distance betweenstations up to 20 kmEK1541EtherCAT Coupler with ID switch, POF for E-bus terminals(ELxxxx)EK15611-port EtherCAT POF junctionEK1814EtherCAT Coupler with 4 integrated digital inputs and 4 integrateddigital outputsEK1818EtherCAT Coupler with 8 integrated digital inputs and 4 integrateddigital outputsEK1828EtherCAT Coupler with 4 integrated digital inputs and 8 integrateddigital outputsEK1828-0010EtherCAT Coupler with 8 integrated digital outputsEK3100PROFIBUS Bus Coupler for EtherCAT Terminals (ELxxxx)EK9000Modbus TCP Bus Coupler for EtherCAT Terminals (ELxxxx)EK9300PROFINET RT Bus Coupler for EtherCAT Terminals (ELxxxx)EK9500EtherNet/IP Bus Coupler for EtherCAT Terminals (ELxxxx)BK1120 EtherCATEtherCAT “Economy plus” Bus Coupler for up to 64 Bus Terminals(255 with K-bus extension)BECKHOFFNew Automation TechnologyWe reserve the right to make technical changes.
BK1150EtherCAT “Compact” Bus Coupler for up to 64 Bus Terminals (255with K-bus extension)BK1250 EtherCATEtherCAT “Compact“ Coupler between EtherCAT Terminals(E-bus) and Bus Terminals (K-bus), adapter terminalDigital inputEL10022-channel digital input terminal 24 V DC, filter 3.0 ms, 4-wiresystemEL10044-channel digital input terminal 24 V DC, filter 3.0 ms, 2-wiresystemEL10088-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wiresystemEL10122-channel digital input terminal 24 V DC, filter 10 µs, 3-wiresystemEL10144-channel digital input terminal 24 V DC, filter 10 µs, 2-wiresystemEL10188-channel digital input terminal 24 V DC, filter 10 µs, 1-wiresystemEL10522-channel digital input terminal NAMUR, DC switching amplifierfor NAMUR sensors according to EN 60947-5-6ELX10522-channel digital input terminal NAMUR, Ex iEL11044-channel digital input 24 V DC, filter 3.0 msEL12522-channel digital input terminal 24 V DC, filter 1 µs, with timestampEL13822-channel digital input terminal thermistorEL1502Up/down counter 24 V DC, 100 kHz, 32 bit counter depthEL1512Up/down counter 24 V DC, 1 kHz, 32 bit counter depthEL18044-channel digital input 24 V DC, 8 x 24 V DC, 4 x 0 V DC, 3.0 msfilter, 3-wire connectionEL18088-channel digital input terminal 24 V DC, filter 3.0 ms, 2-wiresystemEL180916-channel digital input terminal 24 V DC, filter 3.0 ms, type 3EL18144-channel digital input 24 V DC, 8 x 24 V DC, 4 x 0 V DC, filter typ.10 µs, 3-wire connectionEL181916-channel digital input terminal 24 V DC, filter 10 µs, type 3EL1889EtherCAT Terminal, 16-channel digital input 24 V DC, filter 3.0 ms,ground switchingDigital outputEL20022-channel digital output terminal 24 V DC, 0.5 A, 4-wire systemELX20022-channel digital output terminal 24 V DC, 45 mA, Ex iEL20044-channel digital output terminal 24 V DC, 0.5 A, 2-wire systemEL20088-channel digital output terminal 24 V DC, 0.5 A, 1-wire systemEL20222-channel digital output terminal 24 V DC, 2.0 A, 4-wire systemEL20244-channel digital output terminal 24 V DC, 2 A, 2-wire systemEL20322-channel digital output terminal 24 V DC, 2 A, with diagnostics,4-wire systemEL20344-channel digital output terminal 24 V DC, 2 A, with diagnostics,2-wire systemEL2522Incremental encoder simulation terminal (pulse train)EL27844-channel digital output terminals 30 V AC/DC, 2 A, solid stateEL27888-channel digital output terminal, 2-wire, 30 V AC/DC, 2 AEL27944-channel digital output terminals 30 V AC/DC, 2 A, solid stateEL28088-channel digital output 24 V DC, 8 x 0 V DC, 0.5 AEL280916-channel digital output terminal 24 V DC, 0.5 A, 1-wire systemEL2828HD EtherCAT Terminal, 8-channel digital output 24 V DC, 2 AEL288916-channel digital output 24 V DC, 0.5 A, ground switchingAnalog inputEL30011-channel analog input terminal -10 V 10 V, single-ended,12 bitEL30022-channel analog input terminal -10 V 10 V, single-ended,12 bitEL30044-channel analog input terminal -10 V 10 V, single-ended,12 bit, 4 x 2-wire systemEL30088-channel analog input terminal -10 V 10 V, single-ended,12 bit, 1-wire systemEL30111-channel analog input terminal 0 20 mA, differential input, 12 bitBECKHOFFNew Automation TechnologyWe reserve the right to make technical changes.
EL30122-channel analog input terminal 0 20 mA, differential input, 12 bitEL30144-channel analog input terminal 0 20 mA, differential input, 12 bitEL30211-channel analog input terminal 4 20 mA, differential input, 12 bitEL30222-channel analog input terminal 4 20 mA, differential input, 12 bitEL30244-channel analog input terminal 4 20 mA, differential input, 12 bitEL30411-channel analog supply terminal 0 20 mA, single-ended, 12 bitEL30422-channel analog supply terminal 0 20 mA, single-ended, 12 bitEL30444-channel analog input terminal 0 20 mA, single-ended, 12 bit,4 x 2-wire systemEL30488-channel analog input terminal 0 20 mA, single-ended, 12 bit,1-wire systemEL30511-channel analog supply terminal 4 20 mA, single-ended, 12 bitEL30522-channel analog supply terminal 4 20 mA, single-ended, 12 bitEL30544-channel analog input terminal 4 20 mA, single-ended, 12 bit,4 x 2-wire systemEL30588-channel analog input terminal 4 20 mA, single-ended, 12 bit,1-wire systemEL30611-channel analog input terminal 0 10 V, single-ended, 12 bitEL30622-channel analog input terminal 0 10 V, single-ended, 12 bitEL30644-channel analog input terminal 0 10 V, single-ended, 12 bit,4 x 2-wire systemEL30688-channel analog input terminal 0 10 V, single-ended, 12 bit,1-wire systemEL31011-channel analog input -10 10 V, differential input, 16 bitEL31022-channel analog input -10 10 V, differential input, 16 bitEL31044-channel analog input -10 10 V, differential input, 16 bitEL31111-channel analog input 0 20 mA, differential input, 16 bitEL31122-channel analog input 0 20 mA, differential input, 16 bitEL3112-00112-channel analog input -20 20 mA, differential input, 16 bitEL31144-channel analog input 0 20 mA, differential input, 16 bitEL31211-channel analog input 4 20 mA, differential input, 16 bitEL31222-channel analog input 4 20 mA, differential input, 16 bitEL31244-channel analog input 4 20 mA, differential input, 16 bitEL3124-00904-channel analog input 4 20 mA, differential input, 16 bit,TwinSAFE SCEL31411-channel analog supply terminal 0 20 mA, single-ended, 16 bitEL31422-channel analog supply terminal 0 20 mA, single-ended, 16 bitEL31444-channel analog input terminal 0 20 mA, single-ended, 16 bit, 4x 2-wire systemEL31511-channel analog supply terminal 4 20 mA, single-ended, 16 bitEL31522-channel analog supply terminal 4 20 mA, single-ended, 16 bitELX31522-channel analog input terminal 0/4 20 mA, single-ended, 16 bit,Ex iEL31544-channel analog input terminal 4 20 mA, single-ended, 16 bit, 4x 2-wire systemEL31744-channel analog input, parameterisable, -10/0 10 V,-20/0/ 4 20 mA, 16 bitEL3174-00024-channel analog input, parameterisable, -10/0 10 V,-20/0/ 4 20 mA, electrically isolated, differential, 16 bitEL3174-00324-channel analog input, parameterisable, -3 3 V,-20/0/ 4 20 mA, electrically isolated, differential, 16 bitEL3174-00904-channel analog input, parameterisable, -10/0 10 V,-20/0/ 4 20 mA, 16 bit, TwinSAFE SCELX31811-channel analog input terminal 4 20 mA, single-ended, HART,16 bit, Ex iEL31822-channel analog input terminal 4 20 mA, single-ended, 16 bit,HARTEL32011-channel input terminal PT100 (RTD) for resistance sensors, 16bit, 4-wire systemEL3201-00101-channel analog input terminal, PT100 (RTD), 16 bit,high-precisionEL3201-00201-channel analog input terminal, PT100 (RTD), 16 bit,high-precision, with calibration certificate, calibrated version ofEL3201-0010BECKHOFFNew Automation TechnologyWe reserve the right to make technical changes.
EL32022-channel input terminal PT100 (RTD) for resistance sensors, 16bit, 2-, 3-wire systemELX32022-channel analog input terminal RTD for 2-, 3- and 4-wireconnection, 16 bit, Ex iEL3202-00102-channel analog input terminal, PT100 (RTD), 16 bit,high-precisionEL32044-channel input terminal PT100 (RTD) for resistance sensors, 16bit, 2-wire systemELX32044-channel analog input terminal RTD, 2-wire connection, 16 bit, ExiEL32088-channel input terminal PT100 (RTD) for resistance sensors,16 bit, 2-wire systemEL32144-channel input terminal PT100 (RTD) for resistance sensors,16 bit, 3-wire systemEL3214-00904-channel input terminal PT100 (RTD) for resistance sensors, 16bit, 3-wire system, TwinSAFE SCEL32555-channel input, potentiometer measurement with sensor supplyEL33111-channel thermocouple input, 16 bitEL33122-channel thermocouple input, 16 bitELX33122-channel analog input terminal thermocouple/mV measurement,2-wire connection, 16 bit, Ex iEL33144-channel thermocouple input, 16 bitEL3314-00904-channel thermocouple input, 16 bit, TwinSAFE SCELX33144-channel analog input terminal thermocouple/mV measurement,2-wire connection, 16 bit, Ex iEL33188-channel thermocouple input, 16 bitELX33511-channel analog input terminal strain gauge, 24 bit, Ex iEL34033-phase power measurement terminal up to 500 VEL3403-00103-phase power measurement terminal, 500 V AC, 5 AEL34133-phase power measurement terminal up to 690 V ACEL34233-phase energy measurement terminal EconomyEL34333-phase power measurement terminal 500 V ACEL34433-phase power measurement terminal with extended functionalityEL34833-phase grid status terminal for voltage, frequency and phasesEL3483-00603-phase mains monitoring terminal with voltage measurementEL36022-channel analog input terminal 10 V, 5 V, 2.5 V, 1.25 V,differential input, 24 bitEL36122-channel analog input terminal 0 20 mA, differential input, 24 bitEL3681Digital multimeter terminalEL37022-channel analog input terminal -10 10 V with oversamplingEL37422-channel analog input 0 20 mA, differential inputs, 16 bit,oversamplingELM3002-00002-channel analog input terminal 30 V 20 mV, 24 bit, 20 ksps,push-in, service plug, 2-pinELM3004-00004-channel analog input terminal 30 V 20 mV, 24 bit, 10 ksps,push-in, service plug, 2-pinELM3102-00002-channel analog input terminal -20/0/ 4 20 mA, 24 bit,20 ksps, push-in, service plug, 2-pinELM3104-00004-channel analog input terminal -20/0/ 4 20 mA, 24 bit,10 ksps, push-in, service plug, 2-pinELM3502-00002-channel measuring bridge analysis, full/half/quarter bridge,24 bit, 20 ksps, push-in, service plug, 6-pinELM3602-00022-channel IEPE analysis, 24 bit, 50 ksps, BNC, shieldedELM3604-00024-channel IEPE analysis, 24 bit, 20 ksps, BNC, shieldedAnalog outputEL40011-channel analog output terminal 0 10 V, 12 bitEL40022-channel analog output terminal 0 10 V, 12 bitEL40044-channel analog output terminal 0 10 V, 12 bit, 4 x 2-wiresystemEL40088-channel analog output terminal 0 10 V, 12 bit, 1-wire systemEL40111-channel analog output terminal 0 20 mA, 12 bitEL40122-channel analog output terminal 0 20 mA, 12 bitEL40144-channel analog output terminal 0 20 mA, 12 bit, 4 x 2-wiresystemBECKHOFFNew Automation TechnologyWe reserve the right to make technical changes.
EL40188-channel analog output terminal 0 20 mA, 12 bit, 1-wire systemEL40211-channel analog output terminal 4 20 mA, 12 bitEL40222-channel analog output terminal 4 20 mA, 12 bitEL40244-channel analog output terminal 4 20 mA, 12 bit, 4 x 2-wiresystemEL40288-channel analog output terminal 4 20 mA, 12 bit, 1-wire systemEL40311-channel analog output terminal -10 V 10 V, 12 bitEL40322-channel analog output terminal -10 V 10 V, 12 bitEL40344-channel analog output terminal -10 V 10 V, 12 bit, 4 x 2-wiresystemEL40388-channel analog output terminal -10 V 10 V, 12 bit, 1-wiresystemEL41022-channel analog output 0 10 V, 16 bitEL41044-channel analog output 0 10 V, 16 bitEL41322-channel analog output -10 10 V, 16 bitEL41344-channel analog output -10 10 V, 16 bitELX41811-channel analog output terminal 0/4 20 mA, single-ended,HART, 16 bit, Ex iEL47322-channel analog output -10 10 V, with oversamplingPosition measurementEL50011-channel SSI encoder interfaceEL5001-0011SSI monitor terminal, no clock output (simply listening)EL50022-channel SSI encoder interfaceEL5021-00901-channel SinCos encoder interface, 1 VPP, TwinSAFE SCEL5101Incremental encoder interface with differential input, 16/32 bitEL5101-0010incremental encoder interface, 20 million increments/s (with 4-foldevaluation), no single-ended operationEL5101-0011Incremental encoder interface with oversamplingEL5101-0090incremental encoder interface with differential input, 32 bit,TwinSAFE SCEL51511-channel incremental encoder interface, 32 bitELX51511-channel incremental encoder interface NAMUR, 32 bit, Ex iEL5151-00211-channel incremental encoder interface with parameterisable24 V DC outputEL5151-00901-channel incremental encoder interface, 32 bit, TwinSAFE SCEL51522-channel incremental encoder interface, 32 bitCommunicationEL6001EtherCAT Terminal, serial interface RS232EL6002EtherCAT Terminal, 2-channel serial interface RS232EL6021serial interface RS422/RS485EL60222-channel serial interface RS422/RS485EL6070License key EtherCAT Terminal for TwinCAT 3.1EL6070-0033License key EtherCAT Terminal for TwinCAT 3.1 (programmedaccording to customer specifications)EL6080EtherCAT memory terminal 128 kbyteEL6224EtherCAT Terminal, IO-Link master, IP 20EL6224-0090EtherCAT Terminal, IO-Link master, TwinSAFE SCEL66011-port Ethernet Switch terminalEL66144-port Ethernet Switch terminalEL6692EtherCAT bridge terminalEL6731PROFIBUS master/slave terminalEL6751CANopen master/slave terminalEL6752DeviceNet master/slave terminalEL6861BACnet MSTP terminalSystem terminalsEL9011bus end cover for ELxxxx, cover for E-bus contacts, greyEL9012bus end cover for ELxxxx, cover for power and E-bus contacts,greyELX9012bus end cover for ELXxxxx, cover for power and E-bus contacts,blueBECKHOFFNew Automation TechnologyWe reserve the right to make technical changes.
EL9080Isolation terminalEL9100Passive potential feed terminal, 24 V DCEL9110Power supply terminal with diagnostics, 24 V DCEL9181Potential distribution terminal with 16 terminal connections, max.60 V AC/DC, power contacts are fed through, 2 separatepotentials with 8 terminal points per potentialEL9182Potential distribution terminal with 16 terminal connections, max.60 V AC/DC, power contacts are fed through, 8 separatepotentials with 2 terminal points per potentialEL9183Potential distribution terminals with 16 terminal connections, max.60 V AC/DC, power contacts are fed through, 1 separate potentialwith 16 terminal points per potentialEL9184Potential distribution terminal, 8 x 24 V DC, 8 x 0 V DCEL9185Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DCEL9186Potential distribution terminal, 8 x 24 V DCEL9187Potential distribution terminal, 8 x 0 V DCEL9188Potential distribution terminal, 16 x 24 V DCEL9189Potential distribution terminal, 16 x 0 V DCEL9540Surge filter field supplyEL9550Surge filter system and field supplyELX9560power supply terminal, 24 V DC, electrically isolatedTopBack Beckhoff Automation 2020 - Terms of UseBECKHOFFNew Automation TechnologyWe reserve the right to make technical changes.
EL1502 Up/down counter 24 V DC, 100 kHz, 32 bit counter depth EL1512 Up/down counter 24 V DC, 1 kHz, 32 bit counter depth EL1804 4-channel digital input 24 V DC, 8 x 24 V DC, 4 x 0 V DC, 3.0 ms filter, 3-wire connection EL1808 8-channel dig
May 02, 2018 · D. Program Evaluation ͟The organization has provided a description of the framework for how each program will be evaluated. The framework should include all the elements below: ͟The evaluation methods are cost-effective for the organization ͟Quantitative and qualitative data is being collected (at Basics tier, data collection must have begun)
Silat is a combative art of self-defense and survival rooted from Matay archipelago. It was traced at thé early of Langkasuka Kingdom (2nd century CE) till thé reign of Melaka (Malaysia) Sultanate era (13th century). Silat has now evolved to become part of social culture and tradition with thé appearance of a fine physical and spiritual .
demokit offers a quick intro-duction into EtherCAT commu-nication. It includes EtherCAT Terminals and a Coupler for testing simple I/O functions. The enclosed CD contains a step-by-step guide and a full version of TwinCAT 2 as pro-gramming environment for the Beckhoff EtherCAT master. EtherCAT slaves of any type can be tested with this fi eld-
On an exceptional basis, Member States may request UNESCO to provide thé candidates with access to thé platform so they can complète thé form by themselves. Thèse requests must be addressed to esd rize unesco. or by 15 A ril 2021 UNESCO will provide thé nomineewith accessto thé platform via their émail address.
̶The leading indicator of employee engagement is based on the quality of the relationship between employee and supervisor Empower your managers! ̶Help them understand the impact on the organization ̶Share important changes, plan options, tasks, and deadlines ̶Provide key messages and talking points ̶Prepare them to answer employee questions
Dr. Sunita Bharatwal** Dr. Pawan Garga*** Abstract Customer satisfaction is derived from thè functionalities and values, a product or Service can provide. The current study aims to segregate thè dimensions of ordine Service quality and gather insights on its impact on web shopping. The trends of purchases have
moog MSD Servo Drive User Manual CANopen/EtherCAT 8 1.3 Introduction to EtherCAT As far as real-time Ethernet systems are concerned, EtherCAT has become well estab-lished in the area of automation. The decisive factor here is not only the IEEE 802.3/ 100BaseTX Ethernet physics known in the home office area, but also the excellent
Installation and Operation Manual X-DPT-EtherCAT-GF1XX-MFC-eng Part Number: 541B219AAG April, 2017 iii Brooks EtherCAT MFCs Dear Customer, We recommend that you read this manual in its entirety as this will enable efficient and proper use of the EtherCAT thermal mass flow controllers and meters.
