ANALOGUE TEMPERATURE CONTROLLERS

10m ago
5 Views
0 Downloads
457.39 KB
13 Pages
Last View : 1m ago
Last Download : n/a
Upload by : Cannon Runnels
Transcription

ANALOGUE TEMPERATURE CONTROLLERSSPECIFICATIONTOS ON/OFF & PROPORTIONAL CONTROLLERSupply voltage:Power drain:Scale accuracy:Scale range:Input sensor:Max ext. resist:Control band:The TOS range of temperature controllersoffer an extremely cost effective analoguesolution for simple on/off or proportionalcontrol. Options for J/K thermocouplesand PT100 RTDs are available with eitherrelay or SSR drive outputs.Cycle time:Output rating:Selectable on/off or proportional actionoUp to 1200 C scale rangesJ, K T/couple or PT100 input optionsRelay or SSR drive output optionsElectrical life:Deviation output:Ambient range:Approvals:90 to 264Vac/dc @ 50/60 Hz3VA max. /- 2% of FSDSee standard items belowJ or K thermocouple or PT100 - 3 wireT/couple: 100 W , PT100: 5Wper wireOn/Off: Hysteresis 0.5 /- 0.2% of scale rangePropl: Proportional band 3% of scale rangeRelay: 3A/240Vac resistiveSSR: 20mA/12Vdc100,000 ops at rated loado-10 to 50 C non-condensing180gmsOutput rating:Electrical life:Ambient range:Weight:Weight:Part Numbering Options : TC48 A B - C D -110/230VACA Control On/offPDLatchOn/off 4-20mAB Action/ Rev/relayOutput Dir/relayRev/SSRDir/SSRC Sensor K t/coupleJ t/coupleT t/coupleR t/couplePT100 3 wire4-20 mACONNECTION DIAGRAM- SSR drive optionThermocoupleinput2-45362 N11D ScaleJ, K 0 to 200ºCJ, K 0 to 400ºCK 0 to 600ºCK 0 to 800ºCK 0 to 1200ºT -100 to 200ºCT -170 to 30ºCR 0 to 1600ºCPT100 -100 to 200ºCPT100 -50 to 150ºCPT100 0 to 100ºCPT100 0 to 200ºCPT100 -50 to 100ºC4-20mA 0 to 100%12345060012346For other temperature ranges, please contact our sales office.7CONNECTION DIAGRAM8PT100 inputThermocouple inputPT100input- L156413 11DIMENSIONS15InputOutputRangePart NumberJ T/cRelayK T/cRelayPT100Relay0 to 100 Co0 to 200 Co0 to 200 Co0 to 400 Co0 to 800 Co0 to 100 Co74-20mA230Vac(or 24Vac)STANDARD ITEMS64-20mA input10 2110Vac5SSR orRelay9-Panelcut-out-045 x 45 0.5-5741767 48 x 8CTOS-B4RP1CFor suitable panel mounting or DIN-rail wiring sockets see page 33. Forthermocouples and PT100 probes see page 26.Panel cut-out 45 x 45 0-0.5STANDARD ITEMSTC4800 ON/OFF & PD TEMPERATURE CONTROLLERInputThe TC4800 range of temperaturecontrollers is available in on/off orproportional derivative (PD) controloptions, operating from a range ofsensors. A 4 - 20mA input type alsoenables them to be used for thecontrol of processes other thantemperature. Of particular note is thedial lock which can be used to preventtampering.Dial lockOn/off or PD control actionDual 110/230Vac supply inputK T/cK T/cK T/cK T/cJ T/cPT100PT100PT100K T/cK T/cK T/cJ, K T/c, PT100 or 4 - 20mA inputsDeviation LEDs plus meter outputRelay or SSR drive output yRelayRelayRelayRelayRelayRangePart Numbero0 to 200 Co0 to 400 Co0 to 800 Co0 to 1200 Co0 to 200 Co-50 to 150 Co0 to 100 Co0 to 200 Co0 to 200 Co0 to 400 Co0 to 600 CTC4830-03-110/230VACFor suitable panel mounting or DIN-rail wiring sockets see page 33. Forthermocouples and PT100 sensors see page 26.13TEMPERATURE CONTROLLERSSPECIFICATIONSupply voltage:Power drain:Scale accuracy:Scale range:Input sensor:Max ext. resist:Control band:110/230(220-240)Vac @ 50/60 Hz or 24Vac/dc4VA max. /- 2% of full scaleSee part number belowJ, K, R or T thermocouple, 3-wire PT100 or 4-20mAT/couple: 100 W , PT100: 5Wper wireOn/Off

Sensing ranges: 01: 5 to 100 rpm 02: 50 to 1000 rpm 03: 500 to 10000 rpm Input sensor: Any volt-free contact or 3-wire active sensor with a power consumption of 25mA at 15Vdc. See SI and SC range of sensors on pages 29 and 30. Output rating: SPCO relay rated at 5A/240Vac/3

Related Documents:

Analogue Electronics: 24 hours of lectures and tutorials (12 weeks 2 hours/week) Assessment for analogue electronics: Mid-semester test in November, analogue electronics only, 1 hour, 8% of the final mark. Final examination in January, analogue & digital electronics, 2 hours, 50% of the final mark.

Experimenting with Digital to Analogue Converters. Using the PWM command as a Digital to Analogue Converter . 5-1 Controlling the hardware PWM modules. 5-5 Building an R-2R Digital to Analogue Converter. 5-9 Interfacing to the MAX5352 Digital to Analogue Converter . 5-11 Interfacing to the AD8402 digital potentiometer. 5-14 Section 6.

5.2. Digital -to -Analogue Converters 238 5.2.1. The reconstruction of the analogue signal 238 5.2.2. The digital-to-analogue converters DAC 242 5.2.3. The main specifications of digital-to-analogue converters 247 5.3. Methods and Tools of Digital Signal Processing 249 5.3.1. The main terms

35000037 agg man/del/poss cs analogue schd 1/pg 1 400g * h 40020016 agg online promotion prost per 18 yoa 1 h 40020015 agg online promotion prostitution w/prev conv 1 m 50030002 agg perjury 3 m 35000044 agg poss cs analogue pg 2 28g 400g * m 35000045 agg poss cs analogue pg 2 400g or more * h 35000040 agg poss cs analogue

Santa Fe 2006-2010. Mini-ISO Vehicles. Interface Wire Pin Number. Analogue 2 19. Analogue Ground. 20 Batt 12V. 8 Ground. 4. Santa Fe 2006-2010. Interface Wire Pin Number. Analogue 2 6. Analogue Ground. 18 Batt 12V. 12 Ground. 24 Honda Continued. CR-V 05-07, S2000 2001 Interface Wire. Pin

Procedures Programming Manual, publication 1756-PM001. The term Logix5000 controller refers to any controller that is based on the Logix5000 operating system, such as: CompactLogix controllers ControlLogix controllers DriveLogix controllers FlexLogix controllers SoftLogix5800 controllers

Common Procedures Programming Manual, publication 1756-PM001. The term Logix5000 controller refers to any controller that is based on the Logix5000 operating system, such as: CompactLogix controllers ControlLogix controllers DriveLogix controllers FlexLogix controllers SoftLogix5800 controllers

Logix5000 Controllers Common Procedures Programming Manual, publication 1756-PM001. The term Logix5000 controller refers to any controller that is based on the Logix5000 operating system, such as: CompactLogix and Compact GuardLogix controllers ControlLogix and GuardLogix controllers DriveLogix controllers. FlexLogix controllers.

Wired Controllers - Net2 plus 6-7 Wireless Controllers - Net2 nano 8-9 Wireless Controllers - Net2 PaxLock 10-11 Net2 Software 12-13 Video Intercom - Net2 Entry 14-15 Paxton Readers 16-17. Paxton Catalog. Wired Controllers - Net2 plus 18 Wireless Controllers - Net2 nano 19 Wireless Controllers - Net2

controllers utilise PID feedback. The importance of PID controllers has not decreased with the adoption of advanced control, because advanced controllers act by changing the setpoints of PID controllers in a lower regulatory layer.The performance of the system depends critically on the behavior of the PID controllers. 2016: Sun Li

1756 ControlLogix Controllers 1756 ControlLogix-XT Controllers The ControlLogix-XT controllers function in the same way as the traditional ControlLogix controllers. The ControlLogix-XT products include control and communication system components that are conformally coated for extended protection in harsh, corrosive environments:

1756 ControlLogix Controllers 1756 ControlLogix-XT Controllers The ControlLogix-XT controllers function in the same way as the traditional ControlLogix controllers. The ControlLogix-XT products include control and communication system components that are conformally coated for extended protection in harsh, corrosive environments: † When .

Wired Controllers - Net2 plus 6-7 Wireless Controllers - Net2 nano 8-9 Wireless Controllers - Net2 PaxLock 10-11 Net2 Software 12-13 Video Intercom - Net2 Entry 14-15 Paxton Readers 16-17. Paxton Catalog. Wired Controllers - Net2 plus 18 Wireless Controllers - Net2 nano 1

PID-controller Today most of the PID controllers are microprocessor based DAMATROL MC100: digital single-loop unit controller which is used, for example, as PID controller, ratio controller or manual control station. Often PID controllers are integrated directly into actuators (e.g valves, servos)File Size: 1MBPage Count: 79Explore furtherWhen not to use PID-controllers - Control Systems .www.eng-tips.comPID Controller-Working and Tuning Methodswww.electronicshub.org(PDF) DC MOTOR SPEED CONTROL USING PID CONTROLLERwww.researchgate.netTuning for PID Controllers - Mercer Universityfaculty.mercer.eduLecture 9 – Implementing PID Controllerscourses.cs.washington.eduRecommended to you b

signals are derived from analogue sensors and transducers prior to conversion to digital signals for subsequent storage and processing. This unit will introduce learners to the basic analogue principles used in electronics, such as gain, loss and . Edexcel BTEC Level 3 Nationals specification in Engineering 5 – Issue 1 – February 2010 .

voltmeter switch and a 4-position ammeter switch for reading line-to-line or line-to-neutral voltage and phase current. 070 Series ANSI Switchboard Meters 32 – 62 An extensive range of analogue and digital/analogue meters in 41 2" and

Accepts analogue audio up to 1vRMS input. Can be used to record audio from a variable analogue source such as phone / tape recorder or similar. Aux Out: A double Phono/RCA connector or 3.5mm socket. Delivers analogue audio up to 1vRMS output. Can be used to feed audio into an amplifier (but at a reduced volume compared to Line Out)

accomplish a common goal. The analogue electronics project requires these attributes and acquaints students with the modern applications and implementation of analogue electronics. The project requires the use of ADC/DAC, op-amps or 555 timers and challenges students to produce a design at minimal cost.

The Naim DAC is a ten input digital to analogue converter capable of handling stereo audio data of 8 bit to 32 bit resolution and 32kHz to 768kHz sampling rate. Its stereo analogue output is available via DIN or RCA phono sockets. Eight of the DAC digital inputs are accessed via optical or coaxial S/PDIF inputs on the rear panel. These input .

Watlow 942, 988 and F4 series controllers. BACKGROUND Most temperature controllers used in temperature and environmental chambers have the ability to be remotely controlled over a RS-232 and RS-422 or RS-485 serial link. In many manufacturing and test applicati