DaVinci Firmware Update Instructions - Enhanced Vision

2y ago
13 Views
2 Downloads
920.05 KB
12 Pages
Last View : 2d ago
Last Download : 2m ago
Upload by : Warren Adams
Transcription

DaVinci Firmware Update InstructionsNote: You must use a Windows based PC for the manual update process.Step 1: Confirm Your DaVinci is Compatible and choose your update methodWith the DaVinci in Reading Mode, Press and Hold the “FIND” and “MODE” buttonstogether to open the Menus. Using the ZOOM wheel scroll to Product Information,locate the following:Confirm that the Firmware is current:“S/W RN: 3.04.41”“FP R/N: 01-12”***Note: Your current version indicates what upgrade method you should use tobring your DaVinci up to the latest. Please see the notes below*** If your S/W R/N (Software Revision Number) is 03.04.41 or higher you canuse the Flash Update or Direct Update process.o If you are using the Direct Update Process with a Windows 8 or 8.1 PCyou must disable driver signing enforcement prior to beginning. (Theprocess is listed on pages 2 and 3) If your S/W R/N (Software Revision Number) is lower than 03.04.41 youmust use the Direct Update Method.o If you are at a S/W R/N number below 03.04.41 and are using a Windows8 or Windows 8.1 PC for this process you must also disable Driver SigningEnforcement. (These instructions are listed on pages 2 and 3)o Disabling Driver Signing enforcement should be completed before you canrun the executable that is available from our ware.html

DaVinci Firmware Update InstructionsAttention Windows 8 UsersDriver Signature Enforcement must be disabled if you are planning on usingthe Direct Update Procedure and should be performed before you run theupdate application1. While on your desktop press and hold the Windows key on your keyboardand press the letter C to open the Charm menu, then click the gear icon akaSettings.2. Click Change PC Settings.3. Choose “General” Tab and scroll to the bottom of these options***You will need to choose“Advanced startup” with the“Restart Now” option.***4. After your PC Reboots you will be prompted with a menu where you need tochoose the “Troubleshoot” option.5. Next choose “Advanced options”.6. Then choose “Startup Settings” (You will be prompted to restart again).You will have a list of options but we want to choose “Disable driver signatureenforcement”. It should be item #7.7. After Driver signature enforcement is disabled you should be able to Run theDirect Update without issue (Proceed to Step 2).

DaVinci Firmware Update InstructionsAttention Windows 8.1 UsersDriver Signature Enforcement must be disabled if you are planning on usingthe Direct Update Procedure and should be performed before you run theupdate application1. While on your desktop press and hold the Windows key on your keyboard andpress the letter C to open the Charm menu, then click the gear icon aka Settings.2. Click Change PC Settings.3. Choose “Update & Recovery” Tab and then choose the “Recovery” option.You will need to choose “Advanced startup” with the “Restart Now” option.4. After your PC Reboots you will be prompted with a menu where you need tochoose the “Troubleshoot” option.5. Next choose “Advanced options”.6. Then choose “Startup Settings” (You will be prompted to restart again).You will have a list of options but we want to choose “Disable driver signatureenforcement”. It should be item #7.7. After Driver signature enforcement is disabled you should be able to Run theDirect Update without issue(Proceed to Step 2).

DaVinci Firmware Update InstructionsStep 2: Acquire the Updater Application1. Open a web browser and browse to http://www.enhancedvision.com/2. Then Click “Support” At the top of the page http://www.enhancedvision.com/support.html3. From “Support” click on “Software” lClick on “Firmware Update for DaVinci”

DaVinci Firmware Update InstructionsOn this page you will notice a Serial Number confirmation screen. This will confirm ifyour DaVinci is eligible for update. Once you have confirmation cl

DaVinci Firmware Update Instructions On this page you will notice a Serial Number confirmation screen. This will confirm if your DaVinci is eligible for update. Once you have confirmation click on the “DaVinci Updater button to begin the download. Click the Download Update link. Internet Explorer should display the following prompt.

Related Documents:

For questions about DaVinci Siding or its application, contact DaVinci Roofscapes , LLC 913-599-0766 or 800-DaVinci (800-328-4624) or www.davinciroofscapes.com Please be sure to check DaVinci's website for updates.

Stages of a Firmware Upgrade through Firmware Packages in Service Profiles . Cisco UCS B-Series GUI Firmware Management Guide, Release 2.2 9 Upgrading Firmware through Firmware Packages in Service Profiles Updating a Management Firmware Package. Procedure Step 1 IntheNavigationpane,clickServers.

Updating Digital SLR Camera Firmware 4 Select Firmware version in the setup menu. 5 The current firmware version will be displayed. Highlight Update and press the 6 A firmware update dialog will be displayed. Select Yes. 7 The update will begin. Follow the on-screen instruction during the update. 8 Confirm that the update was completed successfully. 8-1.Turn the camera off and remove the .

SAS and SATA hard drive firmware Emulex, QLogic, and Brocade Fibre Channel HBA firmware Tape blade firmware HP StorageWorks MDS600 HP 3Gb SAS BL Switch Firmware Note: EVA firmware, MSA2000 firmware, and BladeSystem Interconnect Switches are not covered in t

INCOMING AND OUTGOING CATERING. DaVinci Inflight Training Institute 2018. Hazard: Food Allergy or Intolerance Awareness DaVinci Inflight Training Institute 2018. Risk: Death, Flight Diversions, Lower Reaction Time in Emergencies, Lethargic. DaVinci Inflight Training Institute 2018.

compatibility matrix, brocade firmware upgrade procedure, brocade firmware version, brocade firmwaredownload command, brocade firmware upgrade steps, brocade firmware latest version Jun 22, 2016 — How to update the firmware on a Brocade 300

1. Download the INSTRUCTIONS for the optional Bluetooth firmware update, HW05_SW01.27.20. 2. Download the UPDATE FILES to a computer by clicking on the following link and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop. HOW TO DETERMINE IF THE FIRMWARE UPDATE HAS ALREADY BEEN INSTALLED

BEAM Team Memo Rosalind Arwas Carolyn Perkins Helen Woodhall A very warm welcome to the March/April 2021 edition of The BEAM. This time last year, the spring edition unexpectedly almost became our last but, as the