LUCIUS - RECOM - DUAL CMH 315W KIT - INSTRUCTION
RECOMDUAL CMH 315W KITINSTRUCTION MANUAL
INTRODUCTION1. CONTENTSTHANK YOU FOR PURCHASING YOUR LUCIUSRECOM DUAL CMH 315W KIT.1. Lucius ReCom Dual CMH 315W BallastA Ballast input cable plugB Ballast output cable plugLucius ReCom Dual CMH Kits are designed toefficiently and effectively provide optimum levels ofhorticultural light.C Control knobD Power ON LEDE Input / output AUX ports forLight Management Controller (LMC)All Lucius ReCom Kits can be controlled manually viathe control knob or by the Lucius Light ManagementController (LMC). Connecting up to 200 Lucius Ballast,ON or OFF ballast timing on multiple zones is allcontrolled remotely with one LMC. The Lucius LightManagement Controller is sold separately andincludes many features described in the Lucius LightManagement Controller instruction manual.F Light Management Controller LED2. ReCom CMH Fixture Bracket(x2)G Reflector cable plugH CMH (PGZ18) lamp holderI“V” Hanger (x2)3. Reflector (x2)JThe Lucius ReCom Dual CMH 315W Ballast isequipped with safety features that protect againstoverloading, short circuit, over temperature, overand under voltage protection and more. With a peakefficiency of 93% the Lucius ReCom Dual CMH 315Wballast is the most efficient and powerful CMH Ballaston the market. It complies with internationalstandard IEC and meets EMI / EMS requirements.Focal Reflector SEK Broad Reflector SE4. CMH 315W Lamp (x2)21B GJThe Lucius ReCom Dual CMH Kits have been testedand approved by internal and external QCdepartments.Lucius ReCom products are the ideal option forRemote or Combo application and compatible withall other reflectors and ballast.DAll options are interchangeable with a smart lockingsystem and without NLucius Reflectors use the new MAG-ATTACH system,fixing and releases reflectors with ease. Using amagnetic field with built-in thermal insulators toreduce the heat transfer into the ballast andincreasing life span of equipment. This prevents thefixture acting like a heat sink and decreasing thebulbs burning temperature. This allows the ceramicarc tube to burn brighter, producing greater lightoutput and efficiency.EOUTLAMP1LAMP2CK8ft / 2.4mLEABest feature is the easy reflector replacement andtools not necessary.IPlease read and hang on to this instruction manual,to help in reducing the risk of damage to the fixture,to yourself or others. Use the fixture only as outlinedin this manual.P.2N4
2. SPECIFICATIONGeneral product informationProduct NameLucius ReCom Dual CMH 315W KitApplicationHorticultural Industry. Ideal for the entire plants cycle.InclusionLucius Recom Dual CMH 315W Ballast - Recom CMH Bracket - Focal / Broad Reflector SE - Indoor Sun LampLight Kit PPF Efficacy1.57 PPF/WMaximum PPF2 X 550 µmol/sLight Kit Weight7.2Kg / 15.8 IbsOperating Temperature-20 to 40 C / -4 F to 104 FShipping and Storage Temperature-40 to 70 C / -40 F to 158 FOperating Humidity0% to 90% non-condensingWaterproof and dustproofIP20120/208/240VOutput Frequency 120Hz Square WaveVoltage Range110 265VVoltage Range 120VMax Current5.9A@120VMax Ignition5KVInrush Current / Input FrequencyInrush 30A/0.8mSecEfficiency93%Power Factor 97Ignition IntervalTHDv 10%1-5-5-5-5 minute*After 5 ignition failed attempts to turn the lamp on,the ballast will be shut down and the LED will alarmerror. See LED Status. To reset the ballast error,disconnect and reconnect the power.2.9@240V50/60 HzOUTPUTINPUTLucius ReCom Dual CMH 315W BallastNominal VoltagePlugUS120VNEMA 5-15UKBS1363APlugEUDIN 49441AU/NZS3112USBAASRUK & EUIEC 60320 C-13CableUSA: 8ft, 3 16AWGAU/NZ, UK, EU, Asia: 2.4m, 3 1.5mm2*All input cables are equipped with the magnet ring tomeet EMC requirements.CableUSA: 8in, 3 16AWGAU/NZ, UK, EU, Asia: 0.2m, 3 1.5mm2* ReCom Dual CMH 315W has 2 output cables.Over-voltageProtection mode is activated when the voltage isgreater than 275V.Control KnobThere are two control knobs for two outputs:OFF - 315W - LMCUnder-voltage240V: Undervoltage between 175 195v leads to90% output power drop.Protection mode is activatedwhen the voltage is less than 175V.120V: Undervoltage between 95 110v leads to 90%output power drop. Protection mode is activated whenthe voltage is less than 95V.Short CircuitWhen the output is shorted, the ballast will be shutdown & the LED will alarm error for short circuitprotection. See LED Status. To reset the ballast error,disconnect and reconnect the power.Open CircuitWhen the output is disconnected for any reason duringoperation, the ballast will shut down & the LED willalarm error for open circuit protection. See LEDStatus. To reset the ballast error, disconnect andreconnect the power.Over-temperatureWhen ambient temperature (Ta) is more than 40 C,the ballast will shut down & the LED will alarmerror for high temperature protection. To reset theballast error, keep the ambient temperature in theallowed operating range, disconnect & reconnectthe power.Lamp END of Life /RectificationThe ballast can protect against end of lamp liferectification.Time DelayAll ballasts have built in ignition delay (0-6S randomly)to reduce the starting current.LED StatusON: Power is applied and the ballast is operating.(LED illuminated)OFF: Power is not available at the input.(LED off)Blinking: Protection Mode.P.3Controller (Optional)GENERAL INFORMATIONPROTECTIONAU/NZS4417Able to connect to the Lucius Light ManagementController. Dimming, timing, temperature setting,simulating sunset and sunrise. See Lucius LightManagement Controller instruction manual for moredetails.Ballast Dimension LxWxH306x190x106 mmBallast Weight5.1Kg / 11.2 IbsCompatible LampCMH 315WCertificationRegulatory StandardsIEC 61347-1:2007 A1:2010(also as used AS/NZS 61347.1:2002)IEC 61347-2-12:2005 A1:2011EN 55015(AS/NZS CISPR 15:2011)IEC 61000Manufacturing CodeAU/NZ: 3012241-C1C5KEU:LRCE-63012241-C1C5E
Indoor Sun CMH 315WColour Temperature (CT)3200K4200KApplicationEntire plant life cycle superior floweringEntire plant life cycle superior vegetative growthLamp Voltage110110Max PPF550 µmol/s535 µmol/sLamp PPF Efficacy1.72 PPF/W1.68 PPF/WLumen3450032000CRI87%97%Base / operating positionPGZ18 / Horizontal (H) 45 PGZ18 / Horizontal (H) 45 Dimension ( L x Dia)193x38mm193x38mmManufacturing 4.2K/PROFixtureBROAD SEFOCAL tible LampsManufacturing CodeLamp HolderPGZ18Stucco Aluminium Miro 4Best choice for the professional gardenersFocal light concentrationHighest average affective lightIncreased light penetration deep intoplant canopy, ideal for high ceilingLow ceiling preferred optionHanging close to the plant canopyLow bay / Wide spreadVented reflector reduce heatover plantCMH 315WHPS SE 400W / 600WMH 400W / 600W / 1000WCMH 315WHPS SE 400W / 600WMH 400WLF-FLF-BRECOM SE BRACKETTypePlugAU/NZS 3112US BAASRUK & EU IEC 60320 C-14CableUSA: 6 in , 3 16AWGAU/NZ, UK, EU, Asia: 0.15m, 3 1mm2Manufacturing CodeAU : LRCF-CAUS : LRCF-CSUK : LRCF-CKEU : LRCF-CE3. SAFETY PRECAUTIONS & WARNINGSThis ballast should not be installed near maritimesafety communications equipment or other criticalnavigation or communication equipment operatingbetween 9 kHz – 1GHz. Relocate the ballast shouldany interference occur.The lamp and reflector can reach very hightemperatures. Do not touch during or immediatelyafter use. Allow sufficient time before touching thelamp or reflector after use.Do not hold and carry any of the products by thepower cords, or pull the power cord with excessiveforce.Avoid coiled cords. Coiled cords may lead toelectromagnetic interference.Never stack ballasts. Operating ambient temperatureof the ballast is -20 to 40 C (-4 to 104 F). By providingthe ballast with ambient air temperature of less than30 C (86 F), it can work more efficiently and avoid anydamage.Do not use the fixture outside the ratedtemperature range or outside the rated voltagerange.Do not attempt to disassemble, repair, or modifythe fixture.Before installation of the ballast, lamp & reflector,ensure the light kit is disconnected from any powerand controller.Never power on the ballast without the lampconnected.Do not position the fixture in the following locations: Locations subject to direct water exposure Locations subject to direct vibration or shock Locations subject to excessive dust Locations subject to direct sunlight Locations subject to condensation or icing Locations subject to corrosive or explosive gases Locations subject to strong static electricityor harmonicsDo not use any of the products if any damage ispresent.Do not turn the ballast on and off rapidly, as thiscan cause damage to the ballast and the lamp.This product complies with all necessary radiointerference regulations; however, there may stillbe a radio interference effect on sensitiveequipment.P.4
4. ReCom KIT INSTALLATIONLUCIUS ReCom products are the ideal option for Remote or Combo applications and compatible with allother reflectors and ballast. The Lucius ReCom Dual CMH 315W Kit can be installed in several options. Alloptions are interchangeable with a smart locking system and without tools.Note: The maximum distance between the ballast and reflector must not exceed 16m.ComboREMOTEPlacingballastinidealenvironment and close to powersupply, decreases heat in growroom. Ballast remote ormobile.HORIZONTAL ReComOne fixture can be installeddirectly to the ballast as ahorizontal combo in the lowceiling room and anotherfixture as a remote, away fromthe ballast.Ideal for low ceiling, widespread and hanging close toplant canopy.VERTICAL ReComOne fixture can be installeddirectly to the ballast as avertical combo to have easieraccess to the control knob andanother fixture as a remote,away from the ballast.To separate the fixture from the ballast:12Ensure the light kit is disconnected from any power and controller.Disconnect ballast output plug from reflector input cable.34Lift the unlocking latch inside the bracket box.Slide reflector bracket out from ballast “T” slot/s.1DISCONNECTIONUNLOCKING LATCH324To connect the fixture to the ballast:123Change ballast position to desired orientation.Align bracket locators with ballast “T” slot/s.Lift the unlocking latch and slide into position.Note: If locking pin does not recess securely in ballast locking slot, the reflector bracket is NOT fixed securely andshould be adjusted to fit correctly. Ensure locking pin drops into the locking slot of the ballast.2Note3P.5
5. REFLECTOR INSTALLATIONReCom Reflectors have a magnetic area which connects to the ReCom Fixture Bracket making it the easiestinstallation ever.Magnetic AreaMagnetic AreaFocal Reflector SEBroad Reflector SETo install the Reflector:1 Ensure the Lucius Recom Kit is disconnected from thepower and controller, if the lamp is connected, removethe lamp.2 Place the reflector on the bracket and: Ensure the openings on the reflector align with lampholders on the bracket. Align the magnetic area of bracket and reflector.3 Remove the reflector by simply pulling it away from the bracket.6. ELECTRICAL CONNECTIONSBefore operation, ensure all electrical connections are secure.1 Switch off main power.2 Ensure the lamp is properly installed. Never usethe fixture without a lamp or reflector.5 Ensure the power cord and the controllercable does not touch the reflector.6 Connect the ballast input cable to the poweroutlet. Ensure power is off.3 Ensure the reflector cable plug in firmlyconnected to the ballast output plug.4 LuciusLightManagementconnections (if applicable):Controller Connect the Lucius Light Management Controllerto the Input AUX port of the ballast via thecontroller Jumper Cable (Signal Wire). Using the Jumper Cable, connect the output AUXport of the first ballast to the input AUX port ofthe second ballast and repeat this process toconnect up to 100 ballasts per controller port x 2zones (Total 200 ballasts).Ballast input viewNo splitter needed7 If external switch gear is used to supplypower to fixture, ensure it can cope with theinrush current of the fixture (see ballastspecifications). Never use household timers toswitch the fixture.8 Always use an electrical contractor to ensurewiring can support the voltage and currentrequirements of the fixture.(See Lucius Light Management Controller Instruction Manual for more details.)P.6
7. START UPThe Lucius ReCom Dual CMH 315W Kit can be operated by either external timer box or Lucius LightManagement Controller. After installing the light kit (ballast, bracket, reflector, and lamp) andensuring the electrical connections are secure, follow below steps.7.1 Using the external timer box7.1.1 Set the control knob to the rated power “315W”.OFF315WLMC7.1.2 Consider all safety factors located in section 3 of this manual and lampsafety factors located on the lamp sleeve.7.1.3 Switch on the main power.Note: All Lucius ReCom ballasts are equipped with ignition time delay to reduce thetotal inrush current. As a result, there is a small delay before the lamp ignites.7.2 Using the Lucius Light Management Controller (LMC)GROWROOMZONE AGROWROOMZONE BLUCIUS BALLASTS HAVE A BUILT IN 0-6 SEC TIMEDELAY TO REDUCE INRUSH CURRENT.UP TO 100 BALLASTPER ZONEUP TO 100 BALLASTPER ZONE7.2.1 Switch off the main power of the ballast. Turn the control knob to the“LMC” option.7.2.2 Connect the LMC power adaptor to the separate power supply and turnthe LMC on. Adjust all LMC settings (ballast selection, dimming, timing,temperature settings, etc.) Follow instructions on the LMC instructionmanual and set the power to the 315W or 100%.7.2.3 Follow section 6.4 on this manual to ensure about signal wireconnections.7.2.4 Switch on the main power. The controller LED on the ballast will turn onwhen the connection is successful and the ballast is fully controlled by theLMC.Note: You will need to connect the ballast input plug to the power supply or adistribution box.You can also turn the control knob to the “LMC” during the ballast operationand use the LMC.P.7OFF315WLMLamp 1COFF315WLMLamp 2C
8. GENERAL MAINTENANCE9. STORAGE AND DISPOSALDisconnect the product from all power before Store the fixture in a dry and cleanenvironment, with an ambient temperatureof -40 to 70 C / -40 to 158 F. The product must not be discarded asunsorted municipal waste, but must becollected separately for the purpose ofperforming any maintenance. Regularly check thefixture for dust or dirt build-up. Dust, dirt, andfingerprint on the lamp, reflector and ballast maycause overheating and decreased performance. Clean the lamp regularly with a soft, dry,andclean cloth.treatment, recovery, and environmentallysound disposal.Clean the ballast and outside of the fixture using a dry or damp cloth. The lamp should be replaced every 5000lighting hours or after 1 year’s operation.10. WARRANTYLucius recommends replacement of reflectorafter 5000 lighting hours to maintainmaximumreflectivity.Dependingonenvironment and lamp type the reflectorwill degrade. The Miro aluminium cannotbe cleaned without damage, therefore it isRefer to warranty on packaging. Lucius is not liableand the warranty will be void under the followingcircumstances:recommended that reflectors are changedonce every year. Do not clean the fixture with detergents,abrasives, or other aggressive substances. Donot touch the inside of the reflector duringIncorrect use of the product.Not adhering to the warnings established in this instruction manual.Improper storage and handling.Unauthorised modification of the product.Use of unauthorised accessories or parts withthe product. Allow sufficient time before connecting thePurchases from unauthorised retailers ordealers.light kit to the power supply aftermaintenance work has been conducted.Contact the retailer where the product was originallythe surface. installation and do not use water to clean it.This will damage the reflective coating on The lamps are chemical hazardous waste(mercury) and must be delivered to thedesignated authorities.purchasedRegularly check the wiring of the product toensure it is undamaged.forwarrantyclaimsinformation.Note: Before initial use, the lamp may have a blackmark on the arc tube. Do not be concerned! Thisshows the light kit has been tested prior topackaging. This will disappear when the lampruns at full power.INDEX1. CONTENTS. P.26. ELECTRICAL CONNECTIONS. P.62. SPECIFICATION. P.37. START UP. P.73. SAFETY PRECAUTIONS & WARNINGS. P.48. GENERAL MAINTENANCE. P.84. ReCom KIT INSTALLATION. P.59. STORAGE AND DISPOSAL. P.85. REFLECTOR INSTALLATION. P.610. WARRANTY. P.8westernelectrical.com.au lucius.com.auP.8andfurther
4. ReCom KIT INSTALLATION P.5 To separate the fixture from the ballast: To connect the fixture to the ballast: 1 Ensure the light kit is disconnected from any power and controller. 2 Disconnect ballast output plug from reflector input cable. 3 Lift the unlocking latch inside the bracket box. 4 Slide reflector bracket out from ballast “T” slot/s. 1 Change ballast position to desired .
217 SYSTEM Application Air volume Model 100 CMH 150 CMH 250 CMH 350 CMH 500 CMH 650 CMH 800 CMH 1000 CMH 1500 CMH 2000 CMH 2500 CMH Commerical Use Optional Unit .
United Kingdom T 44(0) 190 5774 695 sales@apexmedicalcorp.co.uk GERMANY . Apex Medical Corp. No. 9, Min Sheng St., Tu-Cheng, New TaipeiCity, 23679, Taiwan T 886222685568 . 9 cmH 2 O 10 cmH 2 O Patient Flow Inspiration Expiration CPAP Pressure 8 cmH 2 O 7 cmH 2 O 1 cmH 2 C1 O C2 2 cmH2O 3 cmH 2 C3 O 1 2 3
mortality was 53% (n 56). The medians of PaO 2/ FiO 2 ratio, PIP, PEEP, and dynamic pulmonary compliance (PC dyn) at the beginning of MV were 84 mmHg, 32 cmH 2O, 10 cmH 2O, and 21 mL/cmH 2O, respectively. However, before the beginning of VV-ECMO, the medians of PaO 2/ FiO 2 ratio, PIP, PEEP, and PC dyn became 69 mmHg, 36 cmH 2O, 14 cmH 2O, and .
The CMH-35 is a field-installable low ambient fan cycling control to be used with a Bard wall-mounted heat pump. The CMH-35 kit is for use with Bard models W42HC, W48HC and W60HC wall-mount heat pumps. The CMH-35 kit consists of: 7960-861B Supplemental Instructions 8406-105 Low Ambi
1. La Educaci n F sica y el Deporte en Manuel S rgio 2. Aportes de la CMH a la Educaci n F sica 3. Aportes de la CMH a la Recreaci n 4. Aportes de la CMH al Deporte Evaluaciones del comit cient fico -editorial Nota sobre los autores ix 13 17 45 75 113 141 143
O, respectively. PaO 2 was 229.0 mmHg and the measured respiratory system mechanics were: resistance 24.5 mHc 2 O/L/s, compliance 38.4 mL/cmH 2 O. Intrinsic PEEP of 0.7 cmH 2O was observed. PEEP was adjusted to 10 cmH 2 O at a later time point. Chest X-ray showed inltrates progressed in both lungs, and pleural eusion
Book XI:12-15 The ass transformed Book XI:16-19 Lucius regained Book XI:20-23 Preparations for initiation Book XI:24-27 The initiate of Isis Book XI:28-30 And of Osiris. 6 Book I:1 Apuleius’ address to the reader Now! I’d like to
Analog-rich MCUs for mixed-signal applications Large portfolio available from NOW! 32.512KB Flash memory 32.128-pin packages Performance 170MHz Cortex-M4 coupled with 3x accelerators Rich and Advanced Integrated Analog ADC, DAC, Op-Amp, Comp. Safety and security focus
