Gunsmithing Tools

2y ago
27 Views
2 Downloads
3.45 MB
9 Pages
Last View : 2d ago
Last Download : 2m ago
Upload by : Aarya Seiber
Transcription

Gunsmithing ToolsUniversal Sight Mounting FixtureGuarantees true spacing and alignment of scope mount,receiver sight and shotgun bead 2UF1000-UB0356Mauser BarreledAction Clampedin FixtureFeatures Precision machining from solid aluminum casting ensures allcomponents are perfectly aligned. Accommodates any single barrel long gun including bolt actions,lever actions, and pump actions, as long as the barrel can be laidinto the fixture’s “V” blocks. The two hardened steel “V” blocksare accurately ground on the “V” as well as the shaft and areindependently adjustable for height. The movable over-arm has built-in spacing increments of .500"and .860" between center, for locating pilot holes to standardspacing. The over-arm is keyed and slides within a T-slot in eitherdirection, to allow for drilling holes to custom spacing. It’s alwaysin true alignment with the exact center of the gun barrel. Stop block provides infinite spacing. Drill “runout” is minimized because the drill is guided in ahardened and ground drill bushing. When you’re ready to tap thehole, another bushing of the correct size is substituted for the drillbushing to help guide the tap straight and true. This prevents tapbreakage.Order No.DescriptionUF1000Universal Sight Mounting Fixture with 6-48 BushingSet (see Order No. UF1000-UB0648 for sizes)UF1000-UB03563-56 Bushing Set (2 Bushings),Marked #45 (drill), #36 (tap)UF1000-UB06486-48 Bushing Set (3 Bushings),Marked #7/64 (pre-drill), #31 (drill), #27 (tap)UF1000-UB08408-40 Bushing Set (3 Bushings),Marked #30 (pre-drill), #28 (drill), #18 (tap)UF1000-UB103210-32 Bushing Set (3 Bushings),Marked #25 (pre-drill), #21 (drill), #9 (tap)WebGo to our Video Library to view our Universal Sight MountingFixture video.Mauser ActionReady to Be DrilledGun Screw AssortmentA great way to be sure you have what you need,when you need it.GSA200Table 1. Standard Gun Screws Reference Chart(lengths given are under the screw head)Features Use for mounting receiver sights,scope mounts, etc. Heat treated and blued. Includes 12 each of 23 of the mostpopular sizes and types (see Table 1). Priced substantially lower than the cost ofbuying the same screwsindividually.Order No.DescriptionGSA200Gun Screw AssortmentThreadSizeFillister Head(Type A)Oval Head(Type B)Plug Screw(Headless)(Type C)Not heattreated.6-48 (.200" 1/8", 3/16", 1/4", 5/16", 1/8", 3/16", 1/4", 5/16",Head O.D.)3/8", 7/16", 1/2"3/8", 7/16", 1/2"1/8"8-40 (.240"Head O.D.)10-323/16", 1/4", 3/8"3/16", 1/4", 3/8"1/8"——1/8"FORSTER PRODUCTS – 310 SE Lanark Avenue, Lanark, Illinois 61046 P: 815-493-6360 F: 815-493-2371 forsterproducts.com1

Gunsmithing ToolsHeadspace GagesThe proper use of Headspace Gages is the most reliableway to test rifle chamber length.Features Large caliber selection of both rimmed/belted and rimless gages. Three lengths of Headspace Gages for most rifle calibersoffered (GO, NO-GO, FIELD). Manufactured from top-quality, hardened steel and precisionground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting .00015". Each Headspace Gage thoroughly inspected with NIST-certifiedmeasurement tools.Ordering InformationHeadspace Gages are available to fit a wide variety of riflechambers. Ordering information is on pages 4-5.Rimmed/BeltedRimlessSafety and performance are on the line. Improper headspace maybe dangerous to the shooter as well as an impairment to accuracy.Excessive headspace may lead to gas leakage around the caseor head separation and the sudden release of high pressure gas.Insufficient or excessively tight headspace may cause malfunctionssuch as failure to lock. It often makes extraction difficult and maycause dangerous stresses on the mechanism, which may, in turn,shorten component life expectancy or lead to failure.Belted Mag.Rimmed5.56 NATO and 7.62 NATO Headspace GagesSpecifically designed and manufactured to check slightlylonger NATO chambers.22 Rimfire30 Carbine270 WinFeatures Minimum rifle chamber gage checks to ensure that the rifle willaccept the longest (headspace dimension) NATOammunition cases that are currently manufactured. Maximum rifle chamber gage checks to ensure that the rifle doesnot have excessive headspace.The 5.56 NATO maximum chambering requires a slightly longerheadspace than the commercial 223 cal. Rem. The 7.62 NATOchambering requires a longer headspace than the commercial 308Win.Order NumberTwo Headspace Gages (minimum and maximum chambers) areavailable for each NATO chambering. There is not a mid-rangeNO-GO gage available.7.62 NATO Headspace GageDescriptionLength5.56 NATO Headspace GageHG0223GMinimum chamber1.4636"HG556NATOMaxMaximum chamber1.4736"HG762NATOMinMinimum chamber1.6355"HG762NATOMaxMaximum chamber1.6455"WebOur website provides extensive information about howto choose the correct Headspace Gage. Go toforsterproducts.com and click Gunsmithing » HeadspaceGages.2FORSTER PRODUCTS – 310 SE Lanark Avenue, Lanark, Illinois 61046 P: 815-493-6360 F: 815-493-2371 forsterproducts.com

Gunsmithing ToolsWhat Is Headspace?Choosing the Correct Headspace GageAccording to the Sporting Arms and Ammunition Manufacturers'Institute (SAAMI), which sets product standards for firearmsand ammunition, headspace is "the distance from the face ofthe closed breech of a firearm to the surface in the chamber onwhich the cartridge case seats." Some shooters are under themisconception that headspace is fixed over the life of the firearm.Headspace can increase after repeated use of ammunition thatcauses too much pressure. One should routinely check riflechamber headspace every thousand rounds.Forster Products offers three lengths of headspace gages per riflecaliber. In order from the shortest to longest, they are GO,NO-GO, and FIELD:Headspace is measured differently depending on whether thefirearm’s caliber uses rimmed, belted, or rimless cartridges.2. NO-GO: Corresponds to the maximum headspace werecommend for gunsmiths’ chambering new bolt-action rifles.This is not a SAAMI-maximum measurement. If a rifle closeson a NO-GO gage, it may still be within SAAMI specifications,or it may have excessive headspace. To determine if there isexcessive headspace, the chamber should then be checked witha FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’reaming new chambers, in order to ensure tight and accurateheadspace.Rimmed and Belted CartridgesHeadspace distance between the bolt face and the top of the rim(chamber face) when the bolt is closed.1. GO: Corresponds to the minimum chamber dimensions. If arifle closes on a GO gage, the chamber will accept ammunitionthat is made to SAAMI maximum specifications. The GO gageis essential for checking a newly-reamed chamber in order toensure a tight, accurate, and safe chamber that will acceptSAAMI maximum ammo.3. FIELD: Corresponds to the longest safe headspace. If a riflecloses on a FIELD gage, its chamber is dangerously closeto, or longer than, SAAMI-specified maximum chamber size.If chamber headspace is excessive, the gun should be takenout of service until it has been inspected and repaired by acompetent gunsmith. FIELD gages are slightly shorter than theSAAMI maximum in order to give a small safety margin.Rimless CartridgeHeadspace distance between the bolt face and a datum line(determined by SAAMI) where the front of the cartridge rests on itsshoulder when the bolt is closed.FORSTER PRODUCTS – 310 SE Lanark Avenue, Lanark, Illinois 61046 P: 815-493-6360 F: 815-493-2371 forsterproducts.com3

Gunsmithing ToolsTable 2. Headspace Gage Order GuideCartridge’s Rifle ChamberHeadspace GageGO Order No.NO GO Order No.FIELD Order No.BG3030GBG3030NBG3030F219 Donaldson Wasp30-30 WCF219 Zipper30-30 WCFBG3030GBG3030NBG3030F22 Short22LR (Rimfire)HG22RimGHG22RimNHG22RimF22 Long22LR (Rimfire)HG22RimGHG22RimNHG22RimF22LR Match22LR (Rimfire)HG22RimGHG22RimNHG22RimF204 Ruger204 RugerHG0204GHG0204NHG0204F22 PPCPPCHG0PPCGHG0PPCNHG0PPCF22 Savage Hi Pwr.30-30 5NHG2225F22–284284 Win.HG0284GHG0284NHG0284F220 Swift220 SwiftHG0220GHG0220NHG0220F222 Rem.222 Rem.HG0222GHG0222NHG0222F222 Rem. Mag.222 Rem. Mag.HG222MGHG222MNHG222MF223 Rem.223 Rem.HG0223GHG0223NHG0223F243 Win.243 Win.HG0243GHG0243NHG0243F6mm–284284 Win.HG0284GHG0284NHG0284F6mm PPCPPCHG0PPCGHG0PPCNHG0PPCF6mm Rem. 244244 Rem.HG0244GHG0244NHG0244F6x45223 Rem.HG0223GHG0223NHG0223F6x47222 Rem. Mag.HG222MGHG222MNHG222MF244 Rem.244 Rem.HG0244GHG0244NHG0244F25-0630-06 Spring.HG3006GHG3006NHG3006F25-35 WCF30-30 WCFBG3030GBG3030NBG3030F25-284284 Win.HG0284GHG0284NHG0284F257 Roberts257 RobertsHG0257GHG0257NHG0257F257 STWStd. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF257 Wby.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF260 Rem.243 Win.HG0243GHG0243NHG0243F264 Win.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF6.5-0630-06 Spring.HG3006GHG3006NHG3006F6.5-284284 Win.HG0284GHG0284NHG0284F6.5 Rem. Mag.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF6.5 SKAN6.5 SKANHGSKANGHGSKANN—6.5 STWStd. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF6.5x55 Swede6.5x55 SwedeHG6555GHG6555NHG6555F6.5 Creedmoor6.5 CreedmoorHG65CRGHG65CRNHG65CRF6.5x257 Roberts257 RobertsHG0257GHG0257NHG0257F270 Wby.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF270 Win.30-06 Spring.HG3006GHG3006NHG3006F270-284284 Win.HG0284GHG0284NHG0284F275 H&HStd. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF280 Rem.280 Rem.HG0280GHG0280NHG0280F284 Win.284 Win.HG0284GHG0284NHG0284F7mm-08243 Win.HG0243GHG0243NHG0243F7mm-Int. R30-30 WCFBG3030GBG3030NBG3030F7mm Mauser (7x57)257 RobertsHG0257GHG0257NHG0257F7mm Rem. Mag.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF7mm Wby. Mag.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF7-30 Waters30-30 WCFBG3030GBG3030NBG3030F30 Carbine30 CarbineHG0030GHG0030NHG0030F4FORSTER PRODUCTS – 310 SE Lanark Avenue, Lanark, Illinois 61046 P: 815-493-6360 F: 815-493-2371 forsterproducts.com

Gunsmithing ToolsTable 2. Headspace Gage Order Guide (continued)Cartridge’s Rifle ChamberHeadspace GageGO Order No.NO GO Order No.FIELD Order No.30 Herrett30-30 WCFBG3030GBG3030NBG3030F308 Norma Mag.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF307 Win.30-30 WCFBG3030GBG3030NBG3030F308 Win.243 Win.HG0243GHG0243NHG0243F7.62x54 Russian7.62 x 54 Russian—BG762RNBG762RF300 Blackout300 BlackoutHG0300GHG0300NHG0300F30-0630-06 Spring.HG3006GHG3006NHG3006F30-284284 Win.HG0284GHG0284NHG0284F30-3030-30 WCFBG3030GBG3030NBG3030F30-338 Win. Mag.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF30-378 Wby.Large Wby. Mag. .603" O.D.BGWBYG—BGWBYF30-40 KRAG30-40BG3040GBG3040NBG3040F300 H&HStd. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF300 Win. Mag.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF300 Wby.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF303 British303 BritishBG303GBG303NBG303F303 Savage30-30 WCFBG3030GBG3030NBG3030F32 Win. Sp.30-30 WCFBG3030GBG3030NBG3030F32-4030-30 WCFBG3030GBG3030NBG3030F(8x57)(1)8x57 MauserHG8X57GHG8X57NHG8X57F8mm Mauser (8x57)(2)8x57 MauserHG8MMOLDGHG8MMOLDNHG8MMOLDF8mm Rem. Mag.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF338 Federal243 Win.HG0243GHG0243NHG0243F338 Win. Mag.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF338-0630-06 Spring.HG3006GHG3006NHG3006F340 Wby.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF35 Whelen30-06 Spring.HG3006GHG3006NHG3006F35-284284 Win.HG0284GHG0284NHG0284F350 Rem. Mag.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF356 Win.30-30 WCFBG3030GBG3030NBG3030F358 STAStd. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF358 Win.243 Win.HG0243GHG0243NHG0243F375 H&HStd. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF375 Win.30-30 WCFBG3030GBG3030NBG3030F378 Wby.Large Wby. Mag. .603" O.D.BGWBYG—BGWBYF38-55 WCF30-30 WCFBG3030GBG3030NBG3030F416 Rem.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF416 Wby.Large Wby. Mag. .603" O.D.BGWBYG—BGWBYF458 Win. Mag.Std. Belted Mag. .535" O.D.BG300MGBG300MNBG300MF460 Wby.Large Wby. Mag. .603" O.D.BGWBYG—BGWBYF8mm MauserNotes:(1) Used for checking the current SAAMI-specified 19 shoulder angle.(2) Used for checking the 20 48' shoulder angle. This chamber is nolonger manufactured.Tip1. GO: Corresponds to the minimum chamber dimensions.2. N O-GO: Corresponds to the maximum headspacerecommended for gunsmiths' chambering new boltaction rifles.3. F IELD: Corresponds to the longest safe headspace.Go to forsterproducts.com and click Gunsmithing for moreinformation about these three Headspace Gage lengths.FORSTER PRODUCTS – 310 SE Lanark Avenue, Lanark, Illinois 61046 P: 815-493-6360 F: 815-493-2371 forsterproducts.com5

Gunsmithing ToolsTable 3. Caliber Interchangeability forRimmed/Belted Headspace GagesUse ThisHeadspace GageTo Check TheseCartridges’ Rifle Chambers22 Rimfire22 Short22 Long,22 LR Match30-30 WCF219 Donaldson Wasp219 Zipper22 Savage Hi Pwr.25-35 WCF7-30 Waters7mm Int. R30 Herrett303 Savage32 Win. Sp.307 Win.32-40, 356 Win.375 Win.38-55 WCFStd. Belted Mag. .535" O.D.Large Wby. Mag. .603" O.D.257 Wby.257 STW264 Win.6.5 STW6.5 Rem. Mag.270 Wby.275 H&H7mm Rem. Mag.7mm Wby. Mag.300 H&H300 Wby.300 Win. Mag.30-338 Win. Mag.308 Norma Mag.338 Win Mag.8mm Rem. Mag.340 Wby.350 Rem. Mag.358 STA375 H&H,416 Rem.458 Win. Mag.Table 4. Caliber Interchangeability forRimless Headspace GagesUse This Headspace GageTo Check TheseCartridges’ Rifle ChambersPPC22 PPC6mm PPC223 Rem.223 Rem.6x45243 Win.243 Win.260 Rem.7mm-08308 Win.338 Fed358 Win.244 Rem.244 Rem.6mm Rem-244257 Roberts257 Roberts6.5x257 Roberts7mm Mauser (7x57)284 Win.284 0-06 Spring.25-066.5-06270 Win.30-068mm-06338-0635 Whelen30-378 Wby.378 Wby.416 Wby.460 Wby.WebGo to our Video Library to view our Headspace Gage video.6FORSTER PRODUCTS – 310 SE Lanark Avenue, Lanark, Illinois 61046 P: 815-493-6360 F: 815-493-2371 forsterproducts.com

Gunsmithing ToolsGunsmith Screwdriver SetMost commonly used sizes in a convenient storage pouch.Features I ncludes eight commonly used screwdriver sizes. Handy, durable storage pouch may be hung near work areafor easy access.Order No.Description001201Gunsmith Screwdriver Set(Includes Nos. 1, 2, 3, 4, 5, 14, 15, 16)001201Gunsmith ScrewdriversThe right tool and the right quality for the job.Features Hollow ground blades with square faces accurately fit screw slotfor optimal torque, will not damage screw or chamfer work(see Fig. 1 in Table 5). Made of high-quality steel and carefully heat treated. Each screwdriver is an individual unit, no sloppy inserts to slip inand out.Table 5. Gunsmith Screwdriver Order GuideFig. 1Order No.No.Forster ProductsScrewdriver BladeD (Flat)Other ScrewdriverBladeCUseAAB (Shank)DimensionsBCD0010511Rem., Win., etc., plug screws, S&W side plate screws1/8"4"0.023"0.048"0010612Lyman, Leupold, Redfield scope screws, backstrap six gun3/16"4"0.032"0.046"0010713B&L, Weaver, Buehler scope mount screws3/16"4"0.037"0.046"0010814Williams 10-32 screws1/4"4"0.041"0.062"0010915Rem., Win., Sako, Savage, etc., guard screws5/16"4"0.040"0.062"0011016Special for butt stock screws3/8"12"0.065"0.062"00113110Win., O/U butt, Browning trigger guard3/8"4"0.021"0.062"00116113Browning automatic receiver screws1/4"4"0.024"0.062"00117114Guard screws, general purpose5/16"4"0.034"0.062"00118115Guard screws, general purpose5/16"4"0.037"0.062"00119116Redfield streamlined scope mount rings11/64"4"0.031"0.046"01800117Small screws, general purpose1/8"4"0.035"0.048"WebGo to our Video Library to view the Gunsmith Screws andScrewdrivers video.FORSTER PRODUCTS – 310 SE Lanark Avenue, Lanark, Illinois 61046 P: 815-493-6360 F: 815-493-2371 forsterproducts.com7

Gunsmithing ToolsTrigger Guard ScrewsAn inexpensive way to replace damaged guard screws toupgrade the appearance of your firearm.Features Superior, hot salts blued finish. Machine-turned heads for tighter tolerances and better fit. Provided in sets of two, three, and four, depending ongun model.Set of 2Set of 3Set of 4No. of Screwsin SetOrder No.ModelGD2ENFEnfield reg.2GD2ENSEnfield straightened2GD2J656.5 Jap2GD2J777.7 Jap2GD2MNLMauser, non-locking2GD2SAKSako (except Model 75)2GD2SPKSpring Krag2GD2SVGSavage 992GD2SXLSpring. XLong Rear Tang (03A3)2GD3REMRem.3GD3WINWin. 703GD3WIN54Win. 543GD4MLKMauser, locking type4Stockmakers Hand ScrewsOrder No.ModelOrder No.ModelTough enough for repeated trial fittings.SMENFIEnfieldSMWINCWin. 70FeaturesSMJAP66.5 Jap Used in the final, accurate fitting of stock to action. Precision manufacture and hardening allow repeated trial fittings. Provided in sets of two.SMJAP77.7 JapSMREMIRem. 700/721/722Sav. 110,Wby. MK VDakotaStock Inletting Guide ScrewsSMMAUSMauser 98SMSAKOSako (except Model75)SMSPRISpring./KragSMRUGRRuger 77Order No.ModelOrder No.ModelSIENFI1914 Enfield,1917 Enfield,SMLESISAKOSakoHowaVanguardWbySIJAP66.5 JapSISPKRSpring./KragSIJAP77.7 Jap & CZ550SIWINCWin. 70SIMAUSMauserSIREMIRem.700/721/722Sav. 110Wby. MK VDakotaKeeps action square during the stock inletting process.Features Extra long, headless, and free of threads in the fitting area. Allow repeated removal of barreled action in and out of stockwithout removing screws. Provided in sets of two.8FORSTER PRODUCTS – 310 SE Lanark Avenue, Lanark, Illinois 61046 P: 815-493-6360 F: 815-493-2371 forsterproducts.com

Gunsmithing ToolsSwiv-O-Ling ViseFeatures Fully rotatable jaws tilt to your best working angle and securelylock in place – no need to unclamp, turn, and reclamp work. Case hardened jaws open to 1". Removable jaw tightening handle keeps handle from interferingwith work. Overall height is 5 1/4". Gold anodized cast aluminum base drilled for mounting.The most versatile, hasslefree vise for any workbench.SV1000Universal Drift PunchA versatile tool for all semi-autoand pump long guns.Order No.DescriptionSV1000Swiv-O-Ling ViseFeatures Use to remove the cross pin that retains the trigger group to thereceiver in virtually all semi-automatic and pump long guns. 3/16" solid brass shaft protects your firearm.UDP100Order No.DescriptionUDP100Universal Drift Punch"Gold" Inlay Filling KitKwik-Fill Sandbag FillerAdds a touch of elegance to any engraved firearm.Helps get the sand in thebag instead of around it.KF1000Features Durable, compact funnel with a long drop tube. Easily fits into a range bag.001001001041-021Features Fills engraving and lettering on firearms. Enhances value of new or used guns. Includes enough material (vials of fine bronze powder, cleaner,sealant and application patches) for five to ten guns. “Silver” (vial of fine aluminum powder) available separately foruse with the contents of the "Gold" Inlay Filling Kit. Ideal for other hobbies such as model railroad engines.Order No.Description001001"Gold" Inlay Filling Kit018271"Gold" Inlay Filling Kit (pack of 1 dozen)001041-021"Silver" Vial of Fine Aluminum PowderOrder No.DescriptionKF1000Kwik-Fill Sandbag FillerWebGo to our Video Library to see videos of the "Gold" InlayFilling Kit, Universal Punch, Swiv-O-ling Vise, and thePolishing Roll.WARRANTY310 SE Lanark AvenueLanark, Illinois 61046P: 815-493-6360 F: 815-493-2371forsterproducts.comAll Forster Products are warranted against defects in materials and workmanship for the life of the product. Partsexcluded from the warranty are those that, by nature of their function, are subject to normal wear (such as springs,pins, etc.) or that have been altered, abused, or neglected. If the product is deemed defective by workmanship ormaterials, it will be repaired, reconditioned or replaced (at Forster’s option). This warranty supersedes all otherwarranties for Forster Products, whether written or oral.ISO 9001: 2015 accreditedHG0001 Issue 5, March 2019

2 FORS S Lanark Avenue Lanark Illinois 66 P 5--66 F 5--27 forsterproducts.com Gunsmithing Tools Headspace Gages The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Features Large c

Related Documents:

Professional Gunsmithing Test: INTRODUCTION TO GUNSMITHING 16. The best example of a long recoil operated firearm is the Browning .50 caliber machine gun. a. True b. False 17. A gas operating system utilizes the gas generated from the fired cartridge and an internal or external piston, or expansion chamber to cycle the gun. a. True b. False 18.

GUS 127 Firearms Machine Shop II 4 redits ontinues the theory and practice of shop safety, metalworking lathe, and milling machine operations. Students will demonstrate proper use of machine tools while making specialized gunsmithing tools and fitting, chambering, and contouring a barrel for a bolt action rifle. PREREQUISITE: GUS 112

4D Reamer Rentals LTD has over 1200 chamber reamers in stock and ready to ship, along with headspace gauges and many other gunsmithing tools. Our . 8 X 57 9mm (358) x 9.3x74 R 425 Westley Richards 8mm/300 WSM 9.3 x 57 425 Express 325 WSM 9.3

The Model G0750GV 12" x 36" Gunsmithing Lathe features an electronic variable-speed (EVS) spindle control and a built-in two-axis DRO. The totally enclosed gearbox gives you quieter opera-tion, smoother performance, reduced oil-change frequency, and longer gear and bearing life. Also includes an outboard spindle "spider" support

Ragnar benson guerrilla gunsmithing pdf online book download. PhotoWhoa (opens in new tab) is a brilliant blog that curates the latest books, DVDs, Photoshop actions and other products to help you improve your photography. Now they've put together their own ebook, Beauty Collective Vol 1, providing advice and insights from leading beauty .

ProSHOTS Gunsmithing "All you need for happiness is a good gun, a good horse, and a good wife." -Daniel Boone None of which should go very long without a little TLC! That's why we have an on-site gunsmith equipped . so feel free to ask. Please keep in mind that safety and reliability are the 2 most important .

Pro Tools 9.0 provides a single, unified installer for Pro Tools and Pro Tools HD. Pro Tools 9.0 is supported on the following types of systems: Pro Tools HD These systems include Pro Tools HD software with Pro Tools HD or Pro Tools HD Native hard-ware. Pro Tools These systems include Pro Tools software with 003 or Digi 002 family audio .

Abrasive water jet (AWJ) machining has been known for over 40 years. It was introduced, described and presented by Hashish [1]. It is often used to cut either semi-finished products or even final products, namely from plan-parallel plates of material. Nevertheless, applications of abrasive water jets for milling [2], turning [3], grinding [4] or polishing [5] are tested more and more often .