Microwave Drawer: SMD2489ES INSTALLATION MANUAL

Microwave Drawer: SMD2489ESINSTALLATION MANUALSPECIAL WARNINGINSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.IMPORTANT: SAVE this installation manual FOR LOCAL ELECTRICAL INSPECTOR’S USE.READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.CLEARANCES AND DIMENSIONSFor SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the statedclearances and dimensions on pages 2 - 5. See Figures 1 - 7.IMPORTANT NOTES TO THE CONSUMERUNPACKING YOUR MICROWAVE DRAWERKeep this manual with your Operation Manual for future reference. Remove a l l pa ck i ngSealingmaterials from inside the SurfaceMicrowave Drawer. DONOT R EMOVE THE WaveguideWAVEGUIDE COVER, Coverwhich is located on thetop of the MicrowaveDrawer. Remove the feature sticker, if there is one. Checkthe drawer for any damSealingSurfaceage, such as misalignedor bent drawer, damagedOvendrawer seals and sealCavitying surfaces, broken orloose Microwave Drawerguides and dents insidethe cavity or on the front side of the drawer. If there is any damage,do not operate the Microwave Drawer and contact your dealer ora SHARP AUTHORIZED SERVICER. As when using any microwave oven generating heat, there arecertain safety precautions you should follow. These are listedin the Operation Manual. Read all and follow carefully. Be sure your Microwave Drawer is installed and groundedproperly by a qualified installer or service technician. This unit comes equipped with a Wi-Fi connectivity option.In order to activate the Wi-Fi functionality, the area in whichthe unit is installed requires a Wi-Fi signal. Please see theoperation manual for the minimum Wi-Fi specifications.IMPORTANT SAFETY INSTRUCTIONSIf the information in this manual is not followedexactly, a fire or electrical shock may result that could cause propertydamage, personal injury or death.To reduce the risk of tipping, the Microwave Drawermust be secured by a properly installed Anti-Tip block. This Microwave Drawer must be electrically grounded inaccordance with local codes.IMPORTANT NOTES TO THE INSTALLER Make sure the wall coverings and the cabinets around theMicrowave Drawer can withstand the heat generated by theMicrowave Drawer. Read all of the Installation Manual before installing theMicrowave Drawer. Remove all packing material before connecting the electricalsupply.NEVER LEAVE CHILDREN ALONE OR UNATTENDED IN THE AREA WHERE A MICROWAVE DRAWERIS IN USE. NEVER LEAVE THE DRAWER OPEN WHEN THEMICROWAVE IS UNATTENDED. Observe all governing codes and ordinances. Be sure to leave these instructions with the consumer.STEPPING, LEANING OR SITTING ON THEDRAWER MAY RESULT IN SERIOUS INJURIES AND CANALSO CAUSE DAMAGE TO THE MICROWAVE DRAWER. Do not use the Microwave Drawer as a storage space. Thiscreates a potentially hazardous situation. Check that the time-of-day is in the display. If not, touch STOP/CLEAR for safety reasons and to prevent unintended use.1

CLEARANCES AND DIMENSIONS Your oven can be built into a cabinet or wall as a stand-aloneunit. It can also be installed under gas or electric wall ovens, theSuperSteam oven model SSC2489DS or under the cooktop modelsSDH3042DB and SDH3652DB. Be sure that the clearance of the floor between the wall oven andthe microwave drawer is a minimum of 2-inches. The microwave interior will easily accommodate a 9" x 13" oblongdish or a bag of microwave popcorn. The oven can also be mounted flush. Please see instructions forflush mounting. Dimensions that are shown in Figure 1 must be used. Givendimensions provide minimum clearance. Locate electricaloutlet in the shaded area in the upper left-hand corner of thecutout. See Figure 9. Contact surface must be solid and level. Pay special attention tothe floor on which the Microwave Drawer will sit. The floor ofthe opening should be constructed of plywood strong enoughto support the weight of the oven (about 100 pounds). Check location where the Microwave Drawer will be installedfor proper electrical supply.24" MICROWAVE DRAWER STANDARD MOUNT AND MEASUREMENTSABBCDMBEGGHKIEICPIDNLJFFJAACDGHFigure 2A. 215/8" (549.28 mm)B. 411/16" (119.06 mm)C. 13/4" (44.45 mm)D. 217/8" (555.63 mm)E. 23 5/8" (600.07 mm)OFigure 1A. 6" (152.40 mm)B. Suggested electricaloutlet location*C. Anti-Tip blockD. 5" (127 mm)E. 31/2" (88.90 mm)F. 4" (101.60 mm)G. 221/8" (561.98 mm)openingH. 1413/16" (376.24 mm) tobottom of Anti-Tip blockI. Allow 7/8" (22.22 mm)overlapJ. 231/2" (596.90 mm)minimum depthK. Allow 7/16" (11.11 mm)overlapL. 36" (914.40 mm)countertop heightM. Allow 7/16" (11.11 mm)minimum spaceN. Floor must support100 lb (45.4 kg)O. 24" (609.60 mm)cabinet minimumP. 15 9/16" (395.29 mm)openingEF. 16" (406.4 mm)G. 1419/32" (370.68 mm)F door thicknessH. 117/32" (38.89 mm)I. 15" (381 mm) auto drawer openingJ. 4" (101.60 mm)Figures 1 and 2 contain many Microwave Drawer measurementsfor reference when planning the drawer’s location.Your oven can be built into a cabinet or wall as a stand-aloneunit. It can also be installed under gas or electric wall ovens,the SuperSteam oven model SSC2489DS or under the cooktopmodels SDH3042DB and SDH3652DB.* Can also be installed using an electrical outlet in an adjacent cabinetwithin the area where the provided electrical cord can reach. Powercord access hole in cabinet should be a minimum 11/2" diameter holeand deburred of all sharp edges.IMPORTANT Always allow sufficient power cord length to theelectrical outlet to prevent tension.2

Figure 3 represents a typical standard cabinet. If installed incustom cabinets with extended countertops, take into accountvisibility and access to controls. See Figure 4.Move oven location downward forextended countertopsExtended countertopsACBEFigure 4ECDFigure 3A. 25" (635 mm)B. 1/2" (12.7 mm) minimumC. 16" (406.4 mm)D. 36" (914.40 mm)GFE. Control panel shown inopen positionF. 24" (609.60 mm)G. 34 1/2" (876.30 mm)3

24" MICROWAVE DRAWER FLUSH MOUNT AND MEASUREMENTSPrepare cabinet opening as shown in Figures 5, 6, 7ABCEDFGIHKLMJNA. 6" (152.40 mm)B. Suggested electrical outlet locationC. Anti-Tip blockD. 5" (127 mm)E. 31/2" (88.90 mm)F. 4" (101.60 mm)G. 23 7/8" (606.43 mm)H. 1413/16" (376.24 mm) to bottom of Anti-Tip blockI. 117/32" (38.89 mm)J. 23 1/2" (596.90 mm) minimum depthK. 221/8" (561.98 mm)L. 117/32" (38.89 mm) to front of shelfM. 161/4" (412.75 mm) openingN. Floor must support 100 lb (45.4 kg)Figure 5Anti-Tip blockMounting cleatA. 22 1/8" (596.98 mm) mounting cleat opening widthB. 0" flushC. 117/32" (38.89 mm) front of cleat to cabinet faceDrawer faceAFigure 6CLTop viewBCabinetfaceCNote: the mounting surface of the finished cleat mustsit 1 17/32" (38.89 mm) back from the face of the cabinet.No oven shownSuggested electricaloutlet locationAAnti-Tip blockBA. 22 1/8" (561.98 mm) mounting cleat opening widthB. 23 7/8" (606.43 mm) flush opening widthC. 1/8" (3.17 mm) from opening to top of shelfCFigure 7Front view4

ANTI-TIP BLOCKGROUNDING INSTRUCTIONSThis appliance must be grounded. The Microwave Drawer isequipped with a cord having a grounding wire with a groundingplug. It must be plugged into a wall receptacle that is properlyinstalled and grounded in accordance with the National ElectricalCode and local codes and ordinances. In the event of an electricalshort circuit, grounding reduces risk of electric shock by providingan escape wire for the electric current.NORMAL INSTALLATION STEPSANTI-TIP BLOCK INSTALLATION INSTRUCTIONSTo reduce the risk of tipping of the drawer, the Anti-Tip block mustbe properly installed located 14 13/16 -inches above the floor onwhich the Microwave Drawer will sit. The 6-inch Anti-Tip blockmust be provided by the installer. See Figure 1. The Anti-Tip blockprevents serious injury that might result from spilled hot liquids.– Improper use of the grounding plug can resultin a risk of electric shock. Do not use an extension cord. If thepower supply cord is too short, have a qualified electrician orserviceman install an outlet near the appliance.If the Microwave Drawer is ever moved to a different location, theAnti-Tip block must also be moved and installed. When installedto the wall, make sure that the screws completely penetrate thedrywall and are secured in wood or metal so that the block istotally stable. When fastening, be sure that the screws do notpenetrate electrical wiring or plumbing.3-Prong plugGrounded receptacle boxGrounding adapterGrounding pinScrewTab for grounding screw3-Prong receptacleGrounded receptacle boxDRAWER INSTALLATION1. Place the drawer adjacent to the wall or cabinet opening. Plugthe power supply cord into the electrical outlet.Figure 82. Carefully guide the drawer into the prepared opening. Avoidpinching the cord between the oven and the wall.ELECTRICAL OUTLET3. Slide the drawer all the way until the mounting flange is flushwith the face of the cabinet. See Figure 10.The electrical requirements are a 120 volt 60 Hz, AC only, 15amp. or more protected electrical supply. It is recommended thata separate circuit serving only this appliance be provided.4. Open the drawer. Using the 4 holes on the drawer as a template,pre-drill the cabinet using a 1/16" bit. See Figure 10.The drawer is equipped with a 3-prong grounding plug. It mustbe plugged into a wall receptacle that is properly installed andgrounded. Should you only have a 2-prong outlet, have a qualifiedelectrician install a correct wall receptacle.5. Secure the drawer with the 4 screws supplied. See Figure 11.Note: If you have any questions about the grounding or electricalinstructions, consult a qualified electrician or serviceperson.* Can also be installed using an electrical outlet in an adjacent cabinetwithin the area where the provided electrical cord can reach.Always check electrical codes for requirements.SideRailFigure 10Parts supplied - 4 ScrewsFigure 9Figure 115

MODEL AND SERIAL NUMBER LOCATIONBEFORE YOU CALL FOR SERVICEThe nameplate includes model and serial number. Open theMicrowave Drawer fully. The label is beyond the back wall ofthe microwave cavity facing up from the flat surface.Read the BEFORE YOU CALL and operating instruction sectionsin your Operation Manual. It may save you time and expense.The list includes common occurrences that are not the result ofdefective workmanship or materials in this microwave.CARE, CLEANING AND MAINTENANCERefer to the warranty in your Operation Manual for Sharp’stoll-free service number and address. Please call or write if youhave inquiries about your microwave product and/or need toorder parts.Refer to the Operation Manual for cleaning instructions.6

100 Paragon Drive, Montvale, NJ 07645, USA 1-800-BE-SHARP (237-4277)T IN S EB 57 2MRR0

SuperSteam oven model SSC2489DS or under the cooktop models SDH3042DB and SDH3652DB. Be sure that the clearance of the floor between the wall oven and the microwave drawer is a minimum of 2-inches. The microwave interior will easily accommodate a 9" x 13" oblong dish or a bag of microwave popcorn. The oven can also be mounted flush .