WIFLY EXR BATTERY - Adjmedia.s3-website-eu-west-1 .

2y ago
43 Views
2 Downloads
643.51 KB
6 Pages
Last View : 28d ago
Last Download : 6m ago
Upload by : Azalea Piercy
Transcription

a will receive or trasmit the DMX signal.WiFly EXR BatterySetting Up the WiFly:OperationWith this feature you are able to control the fixtures with DMX without the need for XLR cables. The WiFly range is up to 2500 feet/760meters (open line of sight).NOTE: If connecting to a ADJ WiFly fixture, please also see theset up functions associated with your WiFly fixture.1. Power on the WiFly EXR Battery, either by battery or power cable.When using battery power to power the WiFly EXR Battery, putthe battery power switch in the “On” position. When using DCpower, the battery power switch must be in the “Off” position.The antenna must be in either a up or down position and must matchposition of the other antennas. All antennas up or all antennas down.2. When using the WiFly as a transmitter connect the WiFly to aDMX512 controller via XLR cable. When the unit is transmitting, thefirst indicator block in the WiFly strength indicator will flash slowly.When there is no DMX signal to transmit the first indicator block inthe WiFly strength indicator will flash quickly.3. After the LED indicator lights up, use the dipswitches to set theWiFly channel. The channel can be set between 0-15. Note: WiFlyaddress 15 operates in a receive only state.4. The WiFly TranCeivers that are connected to your fixtures or theWiFly fixtures themselves must be set to the same WiFly channel. Ifthe WiFly TransCeiver (receiver) connected to your desired fixture isset up correctly, the WiFly strength indicator will show how strong thereceived signal is. If need be, adjust the TransCeiver to get a strongersignal.ADJ Products, LLC - www.adj.com - WiFly EXR Battery Instruction Manual Page 7WiFly EXR BatteryBattery Precautions1. Handling of Batteries1.1 Do Not Short Circuit the BatteryTry to never short circuit the battery. It generates a very high current which could cause the battery to overheat which may result inelectrolyte gel leakage, harmful fumes, or explosion. The LIR tabsmay easily short-circuit by placing them on conductive surface. Ashort circuit may lead to heat build up and damage of the battery.An appropriate circuitry with PCM is employed to protect accidentalshort circuit of the battery pack.1.2 Mechanical shockDroping the unit, impact hit, bending, etc. may cause failure or shortend life of the LIR battery.3. Other3.1 Battery connection1). Direct soldering of wire leads or devices to the battery is strictlyprohibited.2). Lead tabs with pre-soldered wiring shall be spot welded to thebatteries. Direct soldering may cause damage of components, suchas separator and insulator, by heat build up.3.2 Prevention of short circuit within a battery packThere is enough insulation layers between wiring and the batteries toprovide extra safety protection. The battery pack is constructed in away that no short circuit will occur which may cause smoke or fire.3.3 Do No Disassemble the Batteries1). Never disassemble the batteries.Doing this may cause a internal short circuit in the battery, which maylead to harmful fumes, fire, explosion, or other problems.2). Electrolyte Gel is harmfulElectrolyte Gel should not leak from the LIR battery. Should theelectrolyte gel come into contact with the skin or eyes, flush the areaof contact immediately with fresh water and seek medical attentionimmediately.3.4 Do Not Expose the Battery to Heat or FireNever incinerate or dispose of the batteries in fire. This may cause anexplosion, which would be very dangerous.ADJ Products, LLC - www.adj.com - WiFly EXR Battery Instruction Manual Page 4

WiFly EXR BatteryBattery PrecautionsWiFly EXR BatteryIndicators, Connections, & Functions3.5 Do Not Expose the Battery to water or liquidsNever soak/drop the batteries in liquids such as water, seawater,drinks such as soft drinks, juices, coffee or other.3.6 Battery ReplacementFor battery replacement please contact American DJ customer support (800) 322-6337.3.7 Do Not use a damaged BatteryThe battery could be damaged during shipping, caused by shock.Should the battery be found damaged, including damages to theplastic casing of the battery, deformation of the battery package,smelling of an electrolyte, or leakage of the electrolyte gel, or other,DO NOT use the battery. A battery with a odor of electrolyte or a gelleakage should be placed away from fire to avoid fire or explosion.4. Battery StorageWhen storing the battery, it should be stored at room temperature,with a charge of at least 50%. We recommend that during long periods of storage that the battery be charged every 6 months. Doingthis will prolong the life of the battery and will also make sure that thebattery charge does not fall below the 30% mark.5. Other Chemical ReactionBecause batteries utilize a chemical reaction, battery performancewill deteriorate over time even if stored for a long period of timewithout being used. In addition, if the various usage conditions suchas charge, discharge, ambient temperature, etc. are not maintainedwithin the specified ranges, the life expectancy of the battery maybeshortened or the device in which the battery is used may be damaged by electrolyte gel leakage. If the batteries cannot maintain acharge for long periods of time, even when they are charged correctly, this may indicate it is time to change the battery.6. Battery DisposalPlease dispose of battery according to local regulations.111. Power Save Switch - This button is used to save display energy.Press and hold this button for at least 3 seconds, the indicators willflash 2-3 times. If you have activated the power save mode, battery power indicator will decrease in brightness after 5 seconds andturn off after 10 seconds. To check your battery life press this buttonagain. To deactivate the power save function, press this button againfor at least 3 seconds.2. Battery Life Indicator - This indicator will let you know theremaining life of the battery before you need to charge it.3. WiFly Signal Indicator - These LEDs indicate the receivingstrength of the WiFly signal. When transmitting a signal, the first indicator block will flash slowly. When receiving a signal, the indicator willstay not flash, but stay solid. The first indicator block will flash quicklywhen there is no DMX signal.4. Dipswitches - Use these dipswitches to set the channel.5. 5 Pin DMX Out - Output the DMX signal.6. 3 Pin DMX Out - Output the DMX signal.7. 5 Pin DMX In - Input the DMX signal.8. 3 Pin DMX In - Input the DMX signal.ADJ Products, LLC - www.adj.com - WiFly EXR Battery Instruction Manual Page 59. Power Supply Connection - Connect the provided power supplyto this jack.ADJ Products, LLC - www.adj.com - WiFly EXR Battery Instruction Manual Page 6

Battery Status: To check the battery charge status, turn on the battery power by switching “On” the Battery Power Switch. Please do not let the battery fully die, this severly shortens the life of the battery. Battery Recharge: It will take about 4 hours to reach full charge. To recharge the battery, plug the supplied power supply into the

Related Documents:

On-Battery - The Back-UPS is supplying battery power. Low Battery - The Back-UPS is supplying battery power and the battery is near a total discharge state. Replace Battery Detected - The battery needs to be charged, or is at end of life. Low Battery Shutdown - During On Battery operation Back-UPS BX Series 750VA, 950VA, 1200VA, 1600VA, 2200VA

When the battery weakens, the red indicator light will blink at a constant rate when the user’s hands are within the sensor range. the battery must be replaced within two weeks. To replace the battery on battery option: 1. carefully open the battery’s box. Remove the old battery. 2. Replace the used battery with a new 9V battery (Lithium .

Learning About the Reader’s Batteries 2-34 Lithium Backup Battery 2-34 NiCad Battery Pack 2-35 Installing the Battery Pack 2-35 Removing the Battery Pack 2-36 Checking the Power Remaining in the NiCad Battery Pack 2-38 Charging the Battery Pack 2-39 Disposing of the NiCad Battery Pack 2-39 Recognizing a Low or Discharged Battery 2-40

1 ABOUT YUASA BATTERY THE PIONEER AND LEADER OF POWERSPORTS BATTERIES SINCE 1979 1st Conventional battery: 12N14-3A 1st Yumicron battery: YB14L-A2 1979 1981 1983 1985 1987 1st OEM motorcycle battery YB14L-A2 to 1988 Honda 1st OEM ATV battery YB14A-A2 to Polaris 1st OEM snowmobile battery YB16L-B to Arctic Cat World’s 1 st maintenance-free AGM

RM 6000 Series RMD 6000 Series Battery Battery Removal Both Sides 45 Type Lead Acid 46 Min Weight/Max Amp-hrs C Battery Compartment- Up to 321" lb/Ah 2000 / 930 D Battery Compartment- Up to 341" lb/Ah 2280 / 1085 E Battery Compartment - 400" lb/Ah 2600 / 1240 Max Battery Size L x W x H C Battery Compartment in 38.38 x 16.25 x 31

31517-002 Battery A109-A, All, C. 27515-002 Battery A109-A, All. 20-40SP100 31519-001 Battery A109-LUH, N. Saft FR 459934 US 017494-000 Battery-Nicad FR 166130 Battery-Nicad A109 FR 166456 Battery-Nicad FR 414579 Battery-Nicad ENGINE ACCESSORIES APC Generators & Piece Parts 150SG111Q APC Generator A109, A Replaces Lucas 23032-022

Battery - iBook 2nd Gen with 12.1” Screen 49 Battery - iBook 2nd Gen with 14” Screen 49 Battery - iBook Original with 14.1” Screen 49 Battery - PowerBook G3 (Apple Code M7318) 49 Battery - PowerBook G4 (12”) Silver Case 50 Battery - PowerBook G4 (15”) 50 Battery - PowerBook

As with all Adonis Index programs the specific exercise selection will optimize your shoulder to waist measurements to get you closer to your ideal Adonis Index ratio numbers as fast as possible. IXP 12 Week Program. Cycle 1 – Weeks 1-3: Intermittent Super Sets. Week 1: 3 Workouts. Week 2: 4 Workouts . Week 3: 5 Workouts. Intermittent super sets are a workout style that incorporates both .