Code Master 2 Emergency PLT Factory Sealed Luminaires .
Code Master 2 Emergency PLT Factory Sealed LuminairesExplosionproof, Dust-Ignitionproof52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.NEC:Class I, Division 1 and 2, Groups C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4XMarine Type Electric FixturesNEC:Outside Type (Salt Water)Suitable for use in Wet LocationsNFPA101, Life Safety CodeApplications Ideal for use in chemical and petrochemical plants, such asmanufacturers of plastics, paints and thinners; in refineries; andin other process areas where ignitable vapors, dust, moistureand corrosive elements may be present. Suitable for use in wet locations.FeaturesBattery Pack InformationIllustrated FeaturesFLUORESCENT/AREA: NEC/CEC EXPLOSIONPROOF Auxiliary (emergency) lighting should be used to provide alighted means of egress for personnel in walkways, catwalks,stairs, doorways, tunnels, ramps and aisles. Auxiliary (emergency) lighting should be used to provide “instanton” illumination during power failures. Arrangement of heat-producing components results in moreefficient heat dissipation for cooler fixture operation. Safe, easy servicing without disconnecting any wiring. Patented“wireless” design means the threading of the fixture unit ontomounting hood makes electrical connection. This allows for thefixture unit to easily thread off mounting hood for convenientservicing or for immediate replacement with a “stand-by” unit.Only wiring required is attaching two wires to connection blockin mounting hood. Connection block is easily wired: (a) loosen two screws; (b)make wire connections; and (c) reposition connection block. Acme double-lead threads speed installation and fixtureremoval from mounting hood – only half as many turns arerequired as for single-lead threads. The threads do not stick orgall, eliminating the troublesome problems often encounteredwith single-lead threads during fixture unit removal. All threaded joints are flame-tight. Factory sealed. External seals not required. Fluorescent light source reduces energy costs. Fluorescent lamp life of 10,000 hours reduces relamping costscompared to incandescent. Strategic location of lamp sockets in combination with theinterior prism design of the glass globe provides optimum lightdistribution and control. Superior corrosion resistance with epoxy powder coat finish. Choice of mountings: pendant, ceiling, bracket and stanchion. Fiberglass-reinforced polyester reflectors in standarddome, deep dome or 30 angle are ideal in installationswhere luminaire is subject to exceptionally severe corrosiveatmospheres. The high bay aluminum reflector is designed forinstallations where mounting height work planes range from6 to 9 m (20 to 30 ft). Optional guards protect globes from damage. Guards secure tofixture with three screws. Fixture (52, 64 or 84 W) is available for semi-continuousoperation (one AC ballast permits two-lamp illumination whenpower is on and one battery pack permits one-lamp illuminationwhen AC power is interrupted). Minimum operating temperature: 0 C (32 F). Maximum operating temperature: 40 C (104 F). Remote EEFDB factory sealed “Push-To-Test” station isavailable to verify emergency operation (order separately). Red indicator light is provided with each battery pack toindicate when the battery is charging.Standard Materials Ballast bodies, guards and pendant mounting hoods:copperfree (4/10 of 1% max.) aluminum Ceiling, bracket and stanchion mounting hoods: sand-castcopperfree (4/10 of 1% max.) aluminum Reflectors: aluminum or fiberglass reinforced polyesterStandard Finishes Ballast bodies, guards and mounting hoods: epoxy powdercoat finish, electrostatically applied for complete, uniformcorrosion protectionOptions Fuse kit CF2 for field installation.NEC Certifications and Compliances UL Standard: UL 924, UL 844, UL 1598 UL Listed: E165014 Long life, high temperature, nickel-cadmium (Ni-Cad) battery. Dual voltage (120/277 V, 60 Hz) solid state charger on opencircuit board. Five-year life expectancy. Wiring instructions for “Push-To-Test” button are suppliedwith fixture.Visit our website at www.emerson.com or contact us at (800) 621-1506. May 2019487
Code Master 2 Emergency PLT Factory Sealed LuminairesExplosionproof, Dust-Ignitionproof52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.NEC:Class I, Division 1 and 2, Groups C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4XMarine Type Electric FixturesNEC:Outside Type (Salt Water)Suitable for use in Wet LocationsNFPA101, Life Safety CodeClassified Area Suitability of Code Master 2 Emergency Series (Suitability includes use of reflector)LampTypeClass I, Division 1 and 2With Globe or with Globe and ReflectorUL/NEC Temp. Ident. No.NameplateMarkingGroupsClass II, Division 1 and 2With Globe or with Globe and ReflectorUL/NEC Temp. Ident. No.NameplateMarkingGroupsLampsWattsAmbientTemp C ( F)5240 (104)T6C, DT4E, F, G6440 (104)T6C, DT4E, F, G8440 (104)T6C, DT4E, F, GPLTFLUORESCENT/AREA: NEC/CEC EXPLOSIONPROOF“T” Numbers Represent the Maximum Surface Temperature for Class I, Division 1 Locations andMaximum Surface Temperature Under Dust Blanket for Class II, Division 1 T3BT3CT4T4AT5T6Temp.Range( ange( re and Accessory Weights in kg (lb)Fixture SizeFixture WeightReflector WeightGuard Weight52 W20.4 (44.97)1.4 (3.09)0.9 (1.98)64 W20.4 (44.97)1.4 (3.09)0.9 (1.98)84 W20.4 (44.97)1.4 (3.09)0.9 (1.98)PendantCeilingBracketStanchion0.9 (1.98)1.8 (3.97)2.7 (5.95)0.9 (1.98)Mounting Hood Weights kg (lb)Electrical Specification for AC OperationFixtureWattageLineVoltage (V)Frequency(Hz)Type ofBallastLineAmps (A)Maximum Wattage(W/W)CatalogNumber 5212060PLT Electronic0.4952CMBFS52125227760PLT Electronic0.2052CMBFS52276412060PLT Electronic0.5764CMBFS64126427760PLT Electronic0.2464CMBFS64278412060PLT Electronic0.7384CMBFS84128427760PLT Electronic0.3184CMBFS8427 For optional fusing, order kit -CF2.488Visit our website at www.emerson.com or contact us at (800) 621-1506. May 2019
Code Master 2 Emergency PLT Factory Sealed LuminairesExplosionproof, Dust-Ignitionproof52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.NEC:Class I, Division 1 and 2, Groups C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4XMarine Type Electric FixturesNEC:Outside Type (Salt Water)Suitable for use in Wet LocationsNFPA101, Life Safety CodeLamp WattsLamp Type52PLTHub Size (Inches)Catalog Number 5CFBS841064PLT84PLT52PLT64PLT84PLT52PLT1-1/4 or 1-1/2 CFSS5215064PLT1-1/4 or 1-1/2 CFSS6415084PLT1-1/4 or 1-1/2 CFSS84150BracketFLUORESCENT/AREA: NEC/CEC EXPLOSIONPROOF25 StanchionFixture UnitsBallast body with globe. Indicate voltage desired by adding voltage suffix to Fixture Unit catalog number listed below.Add Voltage Suffixes120 V277 VLamp WattsLamp TypeUnit Catalog 1227 1-1/2” tapped hub furnished with 1-1/2” to 1-1/4” reducer. To order fixture with guard, add suffix -G before adding voltage suffix. Add voltage suffix -12L for 120 V with lamp; or -27L for 277 V with lamp.Visit our website at www.emerson.com or contact us at (800) 621-1506. May 2019489
Code Master 2 Emergency PLT Factory Sealed LuminairesExplosionproof, Dust-Ignitionproof52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.NEC:Class I, Division 1 and 2, Groups C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4XMarine Type Electric FixturesNEC:Outside Type (Salt Water)Suitable for use in Wet LocationsNFPA101, Life Safety CodeMounting HoodsHub Size InchesCatalog CALB-751CALB-100One HubCeilingFour hubs,Three Close-Up PlugsBracketFour hubs,Three Close-Up PlugsFLUORESCENT/AREA: NEC/CEC EXPLOSIONPROOF25 StanchionOne Hub1-1/4 or 1-1/2 CAS-150Mounting Adapter with Connection BlockPermits use of existing A-51 mounting hoods (AAC Ceiling or AALBBracket) with the new Code Master 2 Fixture Unit. After removing existingFixture Unit and adapter, screw in the new CMAD-1 Adapter. Then threadthenew Fixture Unit into the CMAD-1.CMAD-1 1-1/2” tapped hub furnished with 1-1/2” to 1-1/4” reducer.490Visit our website at www.emerson.com or contact us at (800) 621-1506. May 2019
Code Master 2 Emergency PLT Factory Sealed LuminairesExplosionproof, Dust-Ignitionproof52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.NEC:Class I, Division 1 and 2, Groups C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4XMarine Type Electric FixturesNEC:Outside Type (Salt Water)Suitable for use in Wet LocationsNFPA101, Life Safety CodeDescriptionCatalog NumberStandard DomeCMR-4STDeep Dome CMR-4DD30 AngleCMR-4ANPolyester ReflectorsAluminum High Bay ReflectorsCMR-4HBPrismatic Glass GlobesCGL-40052, 64, 84 W PLTCGU4FLUORESCENT/AREA: NEC/CEC EXPLOSIONPROOF52, 64, 84 W PLTAluminum GuardsConnection Block — For Code Master 2 PLT Fixtures52 W - 84 WPLT32RS52 W - 84 WVPT-7 Fixtures when used with Deep Dome Refletors are NOT UL Listed.Visit our website at www.emerson.com or contact us at (800) 621-1506. May 2019491
Code Master 2 Emergency PLT Factory Sealed LuminairesExplosionproof, Dust-Ignitionproof52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.NEC:Class I, Division 1 and 2, Groups C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4XMarine Type Electric FixturesNEC:Outside Type (Salt Water)Suitable for use in Wet LocationsNFPA101, Life Safety CodeDimensions in Millimeters ia.10.4(0.41)Dia.62.5(2.46)25 ) Sq.101.6(4.00)99.3 (3.91)108.0(4.25)3.46"/87.9 .5(4.5)Dia.60.5(2.38) Dia.FLUORESCENT/AREA: NEC/CEC .7(5.50)PendantA52-84 WBCeilingCDABBracketCDAB25 StanchionCDAB622.3 596.9 304.8 517.1 618.7 593.3 304.8 517.1 625.1 599.7 444.5 517.1 563.9 538.5(24.50) (23.50) (12.00) (20.36) (24.36) (23.36) (12.00) (20.36) (24.61) (23.61) (17.50) (20.36) 22.20) (21.20)C444.5(17.50)Reflector Dimensions in Millimeters (Inches)Type ReflectorStandard DomeDeep Dome ABC284.5(11.20)149.9(5.90)475.0(18.70)268.2 177.8/ 515.6(10.56) (7.00) (20.30)Standard and Deep Dome 177.8(7.00)268.2(10.56)30 AngleHigh 515.6(20.30)410.5(16.16)528.3(20.80) Fixtures when used with Deep Dome Refletors are NOT UL Listed.492Visit our website at www.emerson.com or contact us at (800) 621-1506. May 2019
Code Master 2 Emergency PLT Factory Sealed LuminairesExplosionproof, Dust-Ignitionproof* Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each),multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T Lamps. (3,200 lumens each) multiply by 1.34.NEC:Class I, Division 1 and 2, Groups C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4XMarine Type Electric FixturesNEC:Outside Type (Salt Water)Suitable for use in Wet LocationsNFPA101, Life Safety CodePhotometric DataTotal Luminaire Efficiency 79.8%REPORT NUMBER: CMBF64G64 W (two 32 W lamps) Fluorescent Fixture with Globe only *CIE Type - Diagonal2.82Coefficients of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance 0.20% Ceiling Rcc% 300-400-600-90Maximum Candela 493Located at Horizontal Angle 0, Vertical Angle 70#1 – Vertical Plane through Horizontal Angles (0-180)(Through Max. Cd.)#2 – Horizontal Cone through Vertical Angle (70)(Through Max. Cd.)CIE Type - .312722.64% Lamp4.49.325.156.7% 0-180Lumens1022.321095.851108.261108.633831.28% Lamp21.322.823.123.179.8% Fixture26.728.628.628.9100.0Coefficients of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance 0.20% Ceiling -170170-1803050REPORT NUMBER: CMBF64ST64 W (two 32 W lamps) Fluorescent Fixture with Globe andStandard Dome Reflector *% -9090-100100-1105070Zonal Lumen SummaryTotal Luminaire Efficiency 55453730262219171513Zonal Lumen SummaryMaximum Candela 808Located at Horizontal Angle 0, Vertical Angle 35#1 – Vertical Plane through Horizontal Angles (0-180)(Through Max. Cd.)#2 – Horizontal Cone through Vertical Angle (35)(Through Max. Cd.)Visit our website at www.emerson.com or contact us at (800) 621-1506. May 3191.04% Lamp13.824.350.266.5% .6490-1501.6490-1801.640-180 3192.68% Lamp0.00.00.00.066.5% Fixture0.10.10.10.1100.0493FLUORESCENT/AREA: NEC/CEC EXPLOSIONPROOF110-120120-13080
Code Master 2 Emergency PLT Factory Sealed LuminairesExplosionproof, Dust-Ignitionproof* Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each),multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T Lamps. (3,200 lumens each) multiply by 1.34.NEC:Class I, Division 1 and 2, Groups C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4XMarine Type Electric FixturesNEC:Outside Type (Salt Water)Suitable for use in Wet LocationsNFPA101, Life Safety CodePhotometric DataTotal Luminaire Efficiency 57.4%CIE Type - nal1.62REPORT NUMBER: CMBF64AN64 W (two 32 W lamps) Fluorescent Fixture with Globe and30 Angle Dome Reflector *Coefficients of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance 0.20% Ceiling Rcc% WallsFLUORESCENT/AREA: NEC/CEC 0.000.000.000.000.00Maximum Candela 731Located at Horizontal Angle 90, Vertical Angle 37.5#1 – Vertical Plane through Horizontal Angles (90-270)(Through Max. Cd.)#2 – Horizontal Cone through Vertical Angle (37.5)(Through Max. Cd.)CIE Type - 141211Lumens567.55995.691921.142739.90% Lamp11.820.740.057.1% 00-180Lumens13.4513.4513.4513.452753.35% Lamp0.30.30.30.357.4% Fixture0.50.50.50.5100.0Coefficients of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance 0.20% Ceiling -170170-1805070REPORT NUMBER: CMBF64DD64 W (two 32 W lamps) Fluorescent Fixture with Globe andDeep Dome Reflector *% -9090-100100-11070RwZonal Lumen SummaryTotal Luminaire Efficiency 473933282421191615Zonal Lumen SummaryMaximum Candela 933Located at Horizontal Angle 0, Vertical Angle 7.5#1 – Vertical Plane through Horizontal Angles (0-180)(Through Max. Cd.)#2 – Horizontal Cone through Vertical Angle (7.5)(Through Max. 3223.63% Lamp15.927.153.667.2% 00-180Lumens1.921.921.921.923225.55% Lamp0.00.00.00.057.4% Fixture0.10.10.10.1100.0Visit our website at www.emerson.com or contact us at (800) 621-1506. May 2019
Code Master 2 Emergency PLT Factory Sealed LuminairesExplosionproof, Dust-Ignitionproof* Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each),multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T Lamps. (3,200 lumens each) multiply by 1.34.NEC:Class I, Division 1 and 2, Groups C, DClass II, Division 1 and 2, Groups E, F, GClass IIINEMA 4XMarine Type Electric FixturesNEC:Outside Type (Salt Water)Suitable for use in Wet LocationsNFPA101, Life Safety CodePhotometric DataTotal Luminaire Efficiency 58.9%REPORT NUMBER: CMBF64HB64 W (two 32 W lamps) Fluorescent Fixture with Globe and High Bay Reflector *CIE Type - DirectPlane0-180SpacingCriteriaCoefficients of Utilization - Zonal Cavity Method0.8290-2700.82Diagonal0.92Effective Floor Cavity Reflectance 0.20% Ceiling Rcc% 100Lumens0 70 70 70 70 68 68 68 68 65 65 65 63 63 63 60 60 60 590-10239.151 66 64 63 61 65 63 62 60 61 59 58 58 57 57 56 56 55 5410-20599.672 62 59 56 54 61 58 55 53 56 54 52 54 52 51 52 51 50 49Zone20-30645.203 58 54 51 48 57 53 50 47 51 49 47 50 48 46 49 47 45 4430-40625.544 55 50 46 43 54 49 45 43 48 44 42 46 44 42 45 43 41 4040-50452.955 51 46 42 39 50 45 41 39 44 41 38 43 40 38 42 39 37 3650-60185.716 48 42 38 35 47 42 38 35 41 37 35 40 37 35 39 36 34 3358.407 46 39 35 32 45 39 35 32 38 35 32 37 34 32 37 34 32 3115.268 43 37 33 30 42 36 32 30 36 32 30 35 32 29 34 31 29 2880-904.259 41 34 30 28 40 34 30 28 33 30 27 33 30 27 32 29 27 2690-1000.6910 38 32 28 26 38 32 28 26 31 28 26 31 28 25 30 27 25 25100-1100.00110-1200.00Zonal Lumen Summary120-1300.00ZoneLumens% 00160-1700.00170-1800.00Maximum Candela 2540Located at Horizontal Angle 0, Vertical Angle 5#1 – Vertical Plane through Horizontal Angles (0-180)(Through Max. Cd.)#2 – Horizontal Cone through Vertical Angle (5)(Through Max. Cd.)Visit our website at www.emerson.com or contact us at (800) 621-1506. May 2019% Fixture52.5ZoneLumens90-1200.69% Lamp0.0% T/AREA: NEC/CEC EXPLOSIONPROOF60-7070-80
52 PLT CMBFS52 12 27 64 PLT CMBFS64 12 27 84 PLT CMBFS84 12 27 1-1/2” tapped hub furnished with 1-1/2” to 1-1/4” reducer. To order fixture with guard, add suffix -G before adding voltage suffix. Add voltage suffix -12L for 120 V with lamp; or -27L for 277 V with lamp. Code Master 2 Emergency PLT Factory Sealed Luminaires
PLT Savi 8200 PLT Savi W 700 Jabra Engage 75 Jabra Engage 65 PLT Savi 400 Jabra Pro 930 PLT Savi 8200 PLT Savi W 700 Jabra Engage 75 Jabra Engage 65 PLT Savi 400 Jabra Pro 930 PLT Savi 8200 PLT Savi W 700 Jabra Engage 75 Jabra Engage 65 PLT Savi 400 Jabra Pro 930 * Neckband available as a
PLT Savi 8200 PLT Savi W 700 Jabra Engage 75 Jabra Engage 65 PLT Savi 400 Jabra Pro 930 PLT Savi 8200 PLT Savi W 700 Jabra Engage 75 Jabra Engage 65 PLT Savi 400 Jabra Pro 930 PLT Savi 8200 PLT Savi W 700 Jabra Engage 75 Jabra Engage 65 PLT Savi 400 Jabra Pro 930 * Neckband available as a
PLT Savi 8200 PLT Savi W 700 Jabra Engage 75 Jabra Engage 65 PLT Savi 400 Jabra Pro 930 PLT Savi 400 Jabra Pro 930 SDW 5000 Series Comparison Overview WIRELESS DECT SOLUTIONS Art. No. Superior sound quality with super wideband audio, two-mic noise-cancelling system and stereo sound Enhan
But more than this, Quincy Compressor has been building confidence since 1920. We've sold millions of compressors and each one has been designed and assembled in the United States. QUINCY PLT TWO-STAGE, PRESSURE LUBRICATED QUINCY PLT - TWO-CYLINDER, TWO-STAGE CUTAWAY QUINCY PLT BASIC COMPRESSOR High pressure. Low cost. Bottom-line .
Custom-made professional lock tools (or „PLT“) have several advantages over stock items. 1. A PLT has much greater resistance to bending and breaking than a stock tool. 2. PLT may be sized to work best on a specific make/model of lock, succeeding where the „fits-all“ tool might fail.
Ref. Part No. Part Description Comments Revision Dwg 37886 Drawing Image Number 1. 312-647D BLADE BOLT ACCESS COVER 2. 326-823H DECK 60" 3. 803-231C NUT WING 3/8-16 PLT 4. 804-012C WASHER FLAT 3/8 SAE PLT 5. 804-013C WASHER LOCK SPRING 3/8 PLT 11/20/20 AP-SC2560 & AP-SC2572 Skid Cutters 326-836PK 11 Section 2: Cutter Assembly Table of Contents Part Number
The KEMET PLT pulse transformers are common mode choke coils suitable for Power Line Communication (PLC). Designed with our proprietary ferrite core, they show excellent insertion loss characteristics. Applications LT-01: 264 VAC maximum power supply line for Power P Line Communication (PLC) PLT-02: 110 VAC maximum power supply line for .
Second Grade – English/Language Arts Kentucky Core Academic Standards with Targets Student Friendly Targets Pacing Guide . Page 2 of 40 Revised 2/28/2012 College and Career Readiness Anchor Standards for Reading The K-5 standards on the following pages define what students should understand and be able to do by the end of each grade. They correspond to ten broad College and Career Readiness .
