Engineering And Technology - Bahauddin Zakariya University

2y ago
30 Views
2 Downloads
223.57 KB
7 Pages
Last View : 1d ago
Last Download : 2m ago
Upload by : Lee Brooke
Transcription

University College of Engineering & TechnologyProspectus Year 2013University College ofEngineering and TechnologyEstablished19932004 three new disciplines namely Building & Architectural Engineering,Computer Engineering and Mechanical Engineering were launched.i.Seventy acres of land at the campus of the University has beenallocated for the construction of various academic and administrativeblocks of the College. The plans of the administrative and academicblocks, with adequate space for class rooms and laboratories havebeen prepared. Purchase of equipment for laboratories and books forlibrary had already been taken in hand. The construction work of theCivil Engineering Department was completed in January, 1998. Theconstruction work of Electrical Engineering Department wascompleted in January, 2000 and that of Mechanical EngineeringDepartment was completed in May 2007. Moreover, the extension ofCivil and Electrical Engineering departments are also completed. Theconstruction of a boys hostel to accommodate 600 students, sevenresidences for teaching staff and twelve residences of other staff havealso been completed.Academic Programsii.iii.iv.v.EnrollmentB.Sc. Civil Engineering(Morning)B.Sc. Electrical Engineering(Morning)B.Sc. Mechanical Engineering(Morning)B.E. Building & ArchitectureEngineering(Morning)B.Sc. Computer Engineering(Morning)(See the relevant chart at the end)BackgroundIn 1975, the Government of the Punjab decided to set up fourEngineering Colleges at Taxila, Multan, Faisalabad and Bahawalpur inthe same order of priority. In accordance with the decision of thePunjab Cabinet, the first Engineering College initially startedfunctioning at Sahiwal and was later, in 1978, shifted to Taxila as asecond campus of the University of Engineering and Technology,Lahore. Later its status was raised to an independent University ofEngineering and Technology. The proposal for the second College ofEngineering and Technology at Multan met the approval of theECNEC in September 1990.The College of Engineering and Technology was thus established as aConstituent College of the BahauddinZakariya University, Multan. Itsbroad objective is to produce engineers at undergraduate level withBachelor’s degree in conventional fields of Civil, Building &Architectural, Electrical, Computer and Mechanical Engineering tomeet the engineering and technological manpower requirements of theprovince/country.The College offers courses leading to the award of 4-Year engineeringdegree in Civil, Electrical, Building & Architectural, Computer andMechanical Engineering. The College envisages to provide teachingfacilities to more than 1000 students with intake of more than 250students per year (in all disciplines of Engineering) after thecompletion of the project. Due to certain spatial, financial andadministrative constraints, the College started Civil EngineeringProgram in 1994. In 1997, Electrical Engineering Program was started. InThe University College of Engineering & Technology excels ininnovative teaching and research, in developing practical applicationsand approaches to problems and areas of study, and in preparingprofessionals and leaders who will have worldwide influence ontechnologies and societies.FacultyProfessorDr. Shabbar AtiqPrincipalDepartment of Civil EngineeringProfessorDr. Akhtar Ali Malik(On Leave)Assistant ProfessorsEngr. Rana Farooq ShabirEngr. Mudasser Muneer KhanEngr. Abid LatifEngr. Muhammad Ilyas SheikhEngr. Syed Safdar Raza AbdiEngr. Azhar KhitabEngr. Muhammad Asif Ch.Head of the Department(on study leave)(on study leave)(on study leave)LecturerEngr. Tahir SultanEngr. Sobia Riaz83

University College of Engineering & TechnologyEngr.Engr.Engr.Engr.Tanveer Ahmad KhanSaima BatoolNosheen ZaibHufsa KanwalProspectus Year 2013(on study leave)LecturerDepartment of Electrical EngineeringAssistant ProfessorDr. Abdul Sattar MalikEngr. Imran MalikEngr. Muhammad AbrarHead of the Department(on study leave)(on study leave)LecturerAssistant ProfessorHead of the Department(on study leave)(on study leave)Department of Basic SciencesAssistant ProfessorHead of the DepartmentDr. Abu Zar Abid Head of the Department(on study leave)LecturerAhmad HassanMuhammad FazilHuma BashirLecturer(on study leave)Admission Committee (Undergraduate EngineeringPrograms)The following Admission Committee has been approved by the ViceChancellor. The committee will carry out admissions in theUndergraduate Engineering Programs according to the merit criteriaannounced by the College/ University administration.Department of Building & ArchitecturalEngineeringAssistant Professor84Department of Computer EngineeringEngr. Usman Humayun QureshiEngr. Muhammad KashifEngr. Muhammad Zulfiqar AliEngr. Ch. Yasir AnwarEngr. Muhammad WasiqEngr. Shahid IqbalAssistant ProfessorEngr. Syed Shahid BukhariEngr. Kamran Ali QureshiSumra YousufBeenish JamilSunera ImtiazUmbrin hahidLecturerDepartment of Mechanical EngineeringEngr. Abdul Bari FarooqEngr. Farukh Arsalan SiddiquiEngr. Farooq ZamanEngr. Muhammad JamshedEngr. Farhan HanifEngr. Engr. Akbar Ali QureshiEngr.Engr.Engr.Engr.Engr. Asif RasoolDr. Abid MunirEngr. Tauheed Ur RahmanEngr. Ahmed Hesham PashaEngr. Amna RiazEngr. Suhail AfzalEngr. Kiran KhalilEngr. Sumayya BibiEngr. Muhammad Adil BashirEngr. Saad KhanEngr. Abdul Waheed KhawajaEngr. Asad Raza GardaziEngr. Shazia NoorEngr. Tahir Hassan QureshiEngr. Abdul BariEngr. Akhlaq AhmedArch. Rashid AdilEngr. Saleem FakharHead of the Department(on study leave)i.ii.iii.iv.v.vi.vii.Prof. Dr. Shabbar AtiqDr. Abdul Sattar MalikEngr. Asad Raza GardeziEngr. Ahamad Hesham PashaEngr. Usman Humayun QureshiEngr. Suhail AfzalEngr. Syed Safdar Raza r

University College of Engineering & TechnologyProspectus Year 2013ADMISSIONPROCEDURES/INSTRUCTIONS(B.Sc. Engineering Programs)A1GENERAL INSTRUCTIONSi) Try to submit your applicationalong with the required documentsas early as possible. Do not waitfor the last date.ii) As soon as the process ofselection is completed, the meritlist will be notified showing thepercentage admission marks of theapplicants admitted in differentdisciplines against differentcategories.iii) All documents to be attached withthe application form (Form-1/Form-II) should be attested by aClass-I Gazetted Officer of thegovernment or Class-A Officer ofthis University.A2ELIGIBILITY FOR ADMISSIONA2.1 Eligibility Requirements:An applicant for admission to any ofthe B.Sc. Degree Program in Civil,Electrical, Mechanical, Building &Architectural and ComputerEngineering must fulfill the followingeligibility requirements:He should have passed theIntermediate (Pre-Engineering)Examination with Chemistry,Mathematics and Physics from aBoard of Intermediate and SecondaryEducation of Punjab, Federal or anequivalent examination recognized bythe University.However, Intermediate with Physics,Mathematics and ComputerScience shall be acceptable only foradmission in Computer EngineeringA2.2 General EligibilityRequirements:An applicant for admission to any ofthe B.Sc. Engineering Degree Programoffered by the University must fulfillthe following requirements:a) He should have obtained at least60% marks in examination on thebasis of which he seeks admission.Marks for Hafiz-e-Quran andentry test where applicable shallbe added only for determination ofmerit.b) He should be a bonafide residentof the area from where he seeksadmission.c) He should meet standards ofphysique and eye-sight laid downin the medical certificate.d) He must have appeared in theEntry Test for Session 2013arranged by the University ofEngineering & Technology Lahore,PakistanA2.3 Seats for Diploma Holdersa) For admission against seatsreserved for the holders ofDiploma of Associate Engineer,the candidate should have passeddiploma examination of a Board ofTechnical Education in therelevant technology withminimum 60% aggregate marks.b) Applicants seeking admissionagainst seats reserved for theholders of 3 years Diploma ofAssociate Engineer shall only beeligible if their diplomas are inrelevant technology as specifiedagainst each degree program givenbelow.Electrical Engineeringi) Diploma in Electrical Technologyii) Diploma in ElectronicsTechnologyMechanical Engineeringi) Diploma in MechanicalTechnologyCivil Engineeringi) Diploma in Civil TechnologyBuilding & ArchitecturalEngineeringi)Diploma in ArchitectureComputer Engineeringi)Diploma in ComputerTechnologyExplanation:a) A candidate having diploma in anyother technology shall not beeligible for admission. Theadmission of all eligible diplomaholders in a specific discipline willbe purely based on merit.b) Candidates possessing Diploma ofAssociate Engineer cannot applyfor admission on any othercategory except that has beenreserved for the holders of 3 yearsDiploma of Associate Engineer.A2.4 Provisions about admission onthe Basis of a B.Sc. Degree:a) For admission to the B.Sc. coursesin Electrical, Mechanical, Building& Architectural, Civil andComputer Engineering, anapplicant must have passed theB.Sc. examination withMathematics and Physics.b) A person possessing a B.Sc.degree is NOT eligible foradmission to any Bachelor’s Engg.Degree Program at the Collegeunless he has also passed F.Sc.(Pre-Engineering or Pre Medical)examination as per clause A2.1.85

University College of Engineering & TechnologyA2.5 Equivalent Examinations:a)b)c)d)The University recognizes thefollowing examinations as equivalentto the Intermediate (Pre Engineering)Examination with Chemistry,Mathematics and Physics of thePakistani Boards of Intermediate andSecondary Education:Cambridge Overseas Higher SchoolCertificate with Physics, Chemistryand Mathematics;British General Certificate ofEducation (Advanced Level) withPhysics, Chemistry andMathematics;F.Sc. (Pre-Medical) withMathematics as an additional subject.American High School GraduationDiploma (12th Grade) or equivalent.A2.6 GenderBoth Male and Female applicants areeligible to apply for admission toB.Sc. Engineering Degree Programs.A3DETERMINATION OF MERITA3.1 Examination considered forMerit Purposea)b)c)d)For admission to all the Bachelor’sDegree Programs and determination ofmerit the following examinations areconsidered:Marks of Entry Test for Session2013.Higher Secondary School CertificateExamination (H.S.S.C) PreEngineering or equivalent.Bachelor of Science (B.Sc.)Diploma of Associate Engineer.A3.2 Merit DeterminationThe comparative merit of applicantswill be determined on the basis ofadjusted admission marks obtainedby them in the above examinations.86Prospectus Year 2013A) For applicant with H.S.S.C.(Pre Engineering) as thehighest qualification:i) H.S.S.C. (Pre Engineering) orequivalent including Hifz-e-Quranmarks.70%ii) Entry Test marks30%B) For applicants with B.Sc.as the highest qualificationi) B.Sc. Marks35%ii) H.S.S.C. or equivalent examincluding Hifz-e-Quranmarks.35%iii) Entry Test Marks30%C) For Applicants havingDiploma of AssociateEngineer as the HighestQualificationi) Diploma of Associate Engineerincluding Hifz-e-Quranmarks70%ii) Entry Test Marks30%A3.3 EQUIVALENCE OFCERTIFICATES UPTO H.S.S.C.LEVELThe equivalence and issuance ofcertificates, marks up to HSSC levelother than issued by Pakistan’s Boardis to be determined by the IBCC(Inter Board Committee of Chairmenas per decision of the Supreme Courtof Pakistan). Such applicants arerequired to attach an EquivalenceCertificate showing marks with theapplication for admission issued bythe IBCC. The following is theaddress of the IBCC: Inter BoardCommittee of Chairmen,Islamabad, at FBISE Building H-8/4,Islamabad-PakistanFor more information, please visit,http://www.ibcc.edu.pkA3.4 Credit for Hifz-e-QuranTwenty marks are added to theacademic marks in HSSC or equivalentexamination of an applicant who is aHafiz-e-Quran. He gets the benefitonly if he has:i) Filled in the necessary columnprovided in the application form,andii) Appeared before the AssessmentCommittee appointed by theUniversity to conduct an oral testand the Committee accepts hisclaim of being a Hafiz e-Quran.A3.5 Determination of Merit in caseof Equal Percentage ofAdmission MarksIf two or more applicants have equalpercentage of admission marks (up tothree places of decimal), they shall betreated at par for the purpose ofadmission.EXPLANATIONIn case there is a tie for the last seat ina particular discipline/category, thenall the candidates who have securedequal percentage of admission marks(up to three places of decimal) shallbe admitted. No transfer or new entryinto that discipline/category shall,however, be considered unless theactual number of candidates alreadyadmitted falls below the number ofallocated seats for that discipline/category.A3.6 Merit DeterminationCategory-wiseThe seats for admission to theBachelor’s Degree courses at theCollege are distributed over variouscategories. These categories arediscussed in Section A-4 below. Thedetails of the distribution of seats areavailable in the Seats Allocation

University College of Engineering & TechnologyProspectus Year 2013Chart. The applicants for eachcategory are grouped separately. Thenon the basis of the percentageadmission marks, comparative meritof the applicants comprising thegroup is prepared. The applicantsbelonging to a category thus competefor admission amongst themselves forthe seats allocated to it.A3.7 Transfer on the basis of givenpreferencesIn case a seat in any discipline/category of higher preference given bya candidate falls vacant and he iseligible for transfer to that discipline/category on the basis of his merit, heshall be automatically transferred tothe discipline/ category. He will haveno right to retain his admission in theprevious discipline/category unless hesubmit a written with drawl of higherpreference well in time beforedisplaying the next merit list. Thecandidate whose name appears in anymerit list against any category/discipline (even of lower preference)will have to deposit fee so that hisname may be considered for transferto the higher preference (if available)as mentioned above. If a candidatefails to deposit fee at any stage whenhe is offered admission, he will betaken out of the admission processand have no right to claim foradmission against any category/discipline.A3.8 Unutilized SeatsIf some seats allocated to anycategory remain unutilized afterexpiry of the merit list advertised inthe newspaper then those seats willbe filled according to the policydefined by the BZU AdmissionCommittee on the recommendation ofAdmission Committee, UCE&T,BZU Multan.A4CATEGORIES & SYMBOLSCategory KThe seats for the Bachelor’s DegreePrograms are distributed overdifferent categories. For brevity, thesecategories are assigned symbols. Thelist of symbols is given as under:Seats for Baluchistan (by nominationfrom the concerned authority)Category MSeats for FATA (by nomination fromthe concerned authority)Category TSymbols CategoriesACDEFAGHIKMTSeat for Cholistan (by nominationfrom the concerned authority)Open Merit seats (All Punjab)Children of University Teachers.Diploma Holders (Open Merit)Children of UniversityEmployees.Females on open merit.Foreign students.Disable students.Seats for Tribal areas of D. G.Khan DivisionSeats for BaluchistanSeats for FATASeat for CholistanA4.1 Category AOpen merit seats (All Punjab, Forcandidates having domicile of PunjabProvince).Category CSeats for real son/daughter of theworking / retired /deceased teachers ofB.Z. University, Multan.Selection in Category ‘H’ will dependupon merit and the severity ofdisability as well as the suitabilitytowards a particular discipline. Thecandidates applying under category“H” must produce a certificate ofdisability from District AssessmentBoard duly signed by DirectorGeneral Social Welfare, ProvincialCouncil for Rehabilitation of disabledpersons, Lahore.A5DOCUMENTSREQUIREMENTSA5.1 Documents to be submittedby applicants (attestedphotocopies)a)Category DSeats for students holding 3 yearsDiploma of Associate Engineer.b)Category ESeats for real son/daughter of theworking / retired /deceased employeesother than teachers of B.Z.University, Multan.Category FAc)d)Seats for female applicants, all PunjabCategory Ge)Seats for Foreign Students only (bynomination from the concernedauthority)f)g)Category HSeats for Disabled Candidates onlyUse Form-I to apply foradmission in EngineeringPrograms at University Collegeof Engineering & Technology.Degree, Diploma or Certificate ofall the examinations on the basisof which admission is sought (i.e.S.S.C. or equivalent, F. Sc. orequivalent, B.Sc., Diploma ofAssociate Engineer).Detailed Marks CertificatesDomicile Certificate (PunjabOnly)Application Form duly filled in(in original)Entry Test Marks CertificatePassport size Photograph. (02No) to be pasted on theapplication form87

University College of Engineering & TechnologyProspectus Year 2013A5.2 Additional DocumentsTo whom applicableIf an applicant has passed F. Sc.(pre-medical), he has to submitan attested photocopy of thepass certificate for additionalmathematics.ii. If an applicant is applying forthe C & E category seats, he hasto submit in original a certificatefrom the Registrar of theUniversity on prescribed Form.If an applicant is claiming 20 marksfor being a Hafiz-e-Quran, hemust read the instructions givenin section A3.4 under heading“Credit for Hifz-e-Quran” in theProspectus carefully.Committee,University College of Engineeringand Technology, BahauddinZakariya University Multan.i.A6DOMICILE REQUIREMENTSA6.1 Domicile Certificate to besubmitted by all applicantsAll the applicants are required tosubmit with their applications anattested photocopy of their domicilecertificate failing which theirapplications shall not be consideredfor admission.A7APPLICATION PREFERENCEFEEA7.1 An application preference feewill be charged at the time ofsubmission of application as pergiven below:Rs. 100/- charged for each preferenceRs. 500/- for 5 or more preferences.A8DEADLINE FOR RECEIPT OFAPPLICATIONThe Application Form complete in allrespect, along with the requisitedocuments & the preference fee(charged at the time of submission ofapplication) should reach in theoffice ofThe Secretary, Admission88on or before the last date notified forreceipt of applications in nationalnewspapers. The application may bedelivered personally or sent underregistered post. Application receivedafter the closing date shall not beentertained, irrespective of the fact thatit was posted before the closing date.A8.1 Incomplete ApplicationsApplications which are incompletein any respect shall not beentertained. Application form, feeand the documents submitted withit shall not be returned on anyground.A9PROCEDURE FOR THESELECTED CANDIDATESA9.1 Notification of SelectionA list of selectees will be put up onthe Notice Board of ElectricalEngineering Department,University College of Engineering &Technology, Bahauddin ZakariyaUniversity, Multan and also onuniversity website www.bzu.edu.pkNo candidate will be informedindividually about his selection foradmission/withdrawal or cancellationof admission in a department.A9.2 Depositing of Dues andDocumentsThe schedule for payment of dues andsubmission of documents will bedisplayed on the notice board ofElectrical Engineering Departmentwith merit lists. A selectee is requiredto pay the University dues andsubmit the following documents tothe Secretary Admission CommitteeUCE&T BZU Multan.a) Medical Certificate duly signedand stamped by UniversityMedical Officer.b) Five attested copies of the mostrecent passport sizephotographs.c) Original degree and certificates ofMatric, F. Sc., B.Sc., Diploma ofAssociate Engineer, or theequivalent qualifications alongwith two sets of attested photocopies of all the relevantdocuments.d) Original Domicile certificate.e) Affidavit (Undertaking) dulycompleted given in theprospectus.f) Original entry test marks sheet.A9.3 Forfeiture of right of admissionA selectee who fails to fulfill therequirements laid down in ClauseA9.2 within the prescribed time-limitshall forfeit his right of admission.However such affectee may appeal toadmission committee of UCE&T afterfulfilling the requirement laid down inclause A9.2 if any vacant seat in thatparticular category of the specificprogram is available.A9.4 Provisional AdmissionOn fulfillment of the obligationsmentioned in section A9.2 a selecteewill be admitted to the University.This admission shall, however, beprovisional until all the original degreesor certificates submitted by him havebeen checked for their veracity. In caseany document proves to be false, fake,or fabricated at a later stage, aprovisionally admitted student shall beliable to expulsion from the Universityand to any other disciplinary or legalaction the University may deem fit.Moreover, all the fees and chargesdeposited by him shall stand forfeitedin favor of the University.

University College of Engineering & TechnologyProspectus Year 2013A9.5 WarningIf at any stage, a student is foundindulging in politics, his admissionwill be cancelled as referred to inaffidavit form.Entry 2013 for B.Sc. EngineeringPrograms is under SemesterSystem in UCE&T.Rules & Regulation for Semestersystem &Scheme of Studies areavailable with the relevantdepartments.RULES ANDREGULATIONS1.Liability for Injury, Damage & LossThe College teaching programs includetraining in its workshops andlaboratories, places of engineering andarchitectural interest, industrialconcern, and construction jobs. TheUniversity or other concerns shall notbe responsible in the event of an injury,damage or loss to a student resultingfrom any cause whatsoever during thecourse of such training2.Modification of Rules &RegulationsThe rules and regulations governingvarious aspects of student’s life at theUniversity (such as discipline,admission, examination, migration, feesand charges etc.) are given in thisprospectus as they stood at the time ofits publication. There is no guaranteethat these rules and regulations willremain unchanged throughout astudent’s stay at the College, nor doesit in any way restrict or curtail theinherent powers for the Universityauthorities to modify them wheneverin their judgment any modifications arecalled for, and to implement themodified rules and regulations from adate which they deem appropriate.89

Engr. Muhammad Adil Bashir Engr. Saad Khan Engr. Abdul Waheed Khawaja Department of Mechanical Engineering Assistant Professor Engr. Asad Raza Gardazi Head of the Department Engr. Shazia Noor Engr. Tahir Hassan Qureshi (on study leave) Engr. Abdul Bari Engr. Akhlaq Ahmed Lecturer Engr. Abdu

Related Documents:

7 6.Dr. Rashida Atiq Associate Professor, Department of Plant Pathology, Bahauddin Zakariya University, Multan. rashida133@hotmail.com Member 7.Dr. Shahbaz Talib Sahi, Professor and Chairman, Department of Plant Pathology, University of Agriculture, Faisalabad. shahb

2003 Banking Diploma (DAIBP-I), Institute of Bankers Karachi Pakistan 2000 MA (Economics), Department of Economics, Bahauddin Zakariya University Multan Pakistan. Journal Publications HEC RECOGNIZED JOURNALS PUBLICATIONS (NATIONAL AND INTERNATIONL) Sr. No. Complete Paper Citation HEC Category

May 27, 2016 · AKMAL Muhammad Agriculture Expert Bahauddin Zakariya University, Multan Pakistan . ALLEN Caryn-Ann Issues and Crisis Management Nestlé Waters France ALLEN Katie Regional Director Dow Jones France ALLIRA attwill Consultant - health economics Cartwill Consulting United Kingdom

Materials Science and Engineering, Mechanical Engineering, Production Engineering, Chemical Engineering, Textile Engineering, Nuclear Engineering, Electrical Engineering, Civil Engineering, other related Engineering discipline Energy Resources Engineering (ERE) The students’ academic background should be: Mechanical Power Engineering, Energy .

Replacing: ND: Engineering: Electrical Diploma in Engineering Technology in Electrical Engineering (Extended), Replacing: ND: Engineering: Electrical (Extended) Diploma in Engineering Technology in Computer Engineering, Replacing: ND: Engineering: Computer Systems Bachelor of Engineering Technology in Electrical Engineering *New Qualification*

as Welding and Fabrication Engineering Technology, Electrical Engineering Technology, Electronics Engineering Technology, Mechanical Engineering Technology, Automotive Engineering Technology and Food Engineering Technology comprise the eleven major courses of Bachelor of

Careers in Engineering Guide the brighter choice. Contents ABOUT LSBU 4–5 BUILDING SERVICES ENGINEERING 6–7 CHEMICAL AND PETROLEUM ENGINEERING 8–9 CIVIL ENGINEERING 10–11 ELECTRICAL AND ELECTRONIC ENGINEERING 12–13 MECHANICAL ENGINEERING 14–15 MECHATRONICS ENGINEERING 16–17 PRODUCT DESIGN ENGINEERING 18–19 An engineering degree is a big challenge to take on. There is no denying .

Agile Development in a Medical Device Company Pieter Adriaan Rottier, Victor Rodrigues Cochlear Limited rrottier@cochlear.com.au Abstract This article discuss the experience of the software development group working in Cochlear with introducing Scrum as an Agile methodology. We introduce the unique challenges we faced due to the nature of our product and the medical device industry. These .