Machine Tools - CeeInd
Machine ToolsMultitasking Machines /5-Axis Machining CentersCNC LathesMachining CentersGrindersIT / CNC
Okuma is a comprehensive machine toolmanufacturer that provides support forproduction sites worldwide“M-E-I-K Merging” technologies addinformation technology and knowledgecreation to machines and electronicsOkuma is a comprehensive machine tool manufacturer which produces not only multitaskingSoliciting the most out of the high potential of machine tools requires not only a CNC, but also themachines, lathes, machining centers and grinders, but also control systems and peripheral equipment.combination of motors, encoders and other units in their best state. At Okuma we have achieved highperformance and the best balance in control by developing all of these units in-house.Okuma has provided machine tools at the forefront of a wide variety of industrial fields over our longhistory. During this time, we have faced a variety of issues in the field, together with our customers,Okuma’s Single Source for M-E-I-K (Mechanics - Electronics - IT - Knowledge) DNA has beendeveloped a wider range of models and products, and grown into a comprehensive manufacturer ofcultivated over a history of more than a century since the company was founded, and passed on tomachine tools used at production sites throughout the world.each generation.As a trusted brand, we will work to further refine the quality of our products and services, backed byWe will continue to work for future-oriented value creation with Premium Solutions produced byour advanced technologies, in order to continue to earn the support of our customers.“M-E-I-K Merging” technologies.12
Intelligent TechnologyImproved ease of use with Intelligent TechnologiesCollision preventionCollision Avoidance SystemOkuma’s Intelligent Technologieswhich directly contribute to improvingcustomer productivityThe risk of collisions inside the machine increases in multi-surface machining with complex movements. We thereforedeveloped a collision avoidance function utilizing advanced control technologies. This function stops the machine operationimmediately before a collision in both automatic and manual operation as the world's first "Collision-Free Machines." Thisallows anyone to focus on machining without worry, and greatly reduces the time required for setup and first part cycletimes.On machine shop floors there are many issues that can hinder accuracy and production efficiency. Examplesinclude thermal deformation of the machine from temperature changes and misalignment of axes in multi-axismachining. Interference or collision of machine moving parts, chatter vibration when cutting—these phenomenahave been accepted unavoidable.However, we believe that overcoming these issues is the mission of the machine tool manufacturer. Okumahelps customers to improve productivity with intelligent technology originating from a Single Source for M-E-I-K(Mechanics - Electronics - IT - Knowledge).Machine movementsare checked in advanceand stopped before acollision occursCutting condition searchRealization of high precision through Intelligent TechnologiesMachining NaviManageble Deformation — Accurately ControlledRotation speed can’t be increased due to worries about occurrence of chatter. Machining Navi solvesthis worry. It finds the optimal machining conditions by utilizing superior detection and controlfunctions. This contributes not only to surface refinement, but also reduction of processing time,improvement of productivity, longer usable life for tools and consolidation of work processes.Thermo-Friendly Concept Actual data with the MB-46VAvertical machining centerMachining dimensionalchange over time:8 µmMachining dimensionalchange [µm]Changes in the ambient temperature around machines and heat generated during cutting have aserious effect on machining accuracy. Okuma therefore uses a machine design that adapts tothese temperature changes for better control of thermal deformation. By checking the machinedimensions at startup, the need for compensation thereafter can be greatly reduced.Machining dimensional change20Z-axis6 µmX-axis (no offset)8 µm10Machining NaviOFF0Machining NaviONY-axis 5 µm-10* Room temperature change of 8 CUsing Thermo Active Stabilizer–Construction(TAS-C)Machining NaviONMachining NaviOFFRoom temperature changeRoomtemperature02468Navigate to the best cuttingconditions with spindle speedoptimization and control8 C101214Time [H]Optimized Servo ControlSERVONAVIGauging and compensation of geometric error5-Axis Auto Tuning SystemGeometric error such as milling spindle misalignment often occurs on 5-axis machines cutting multiplesurfaces with inclined machining axes. In the past much time has been needed to make manual correctionsfor four types of geometric error manually; now, with the 5-Axis Auto Tuning System, measurement and autocompensation for up to 11 types of error is done in only 10 minutes.Machining accuracy and surface quality are improved with automatic optimization of servocontrol. This makes it possible to increase acceleration and reduce machining time, especiallyon machining centers. It can also immediately eliminate the reversal spikes, noise, vibration,crease marks, and "fish scales" that occur with long machine use over many years, maintaininglong-term accuracy and stable movements.Acceleration Actual data with the MU-6300V 5-axis vertical machining centerMaximum machining surface error in multi-sided machiningManual adjustment without5-Axis Auto Tuning SystemMax 12 µmHighNewSERVON AVIAfter using5-Axis Auto Tuning SystemMax 3 µmLowPrevious controlHeavy3AgedHigheracceleration,shorter cycletimeAfter SERVONAVIWorkpieceweightLight4
Okuma’s product lineup responds to diverse needsSuper MultitaskingMachinesSuper Multitasking MachinesP8MU-5000V LASER EXMU-6300V LASER EXMU-8000V LASER EXMULTUS U3000 LASER EXMULTUS U4000 LASER EX5-Axis Machining Centers / Multitasking MachinesP10P11MU-4000VMU-5000VMU-6300VMU-8000V 5-Axis HorizontalMachining CenterMU-S600VMU-400V Large 5-Axis 5-Axis High-SpeedMachining CentersBlade MachineBLADE T400MILLAC 800VHMILLAC 1000VHMU-10000HP14P15 Intelligent Multitasking MachinesMULTUS U3000MULTUS U4000MULTUS U5000MULTUS B200MULTUS B250MULTUS B300MULTUS B400 HorizontalMultitasking MachineMULTUS B550MULTUS B750P16 Vertical Multitasking Double-Column 5-Axis VerticalMultitasking MachinesMultitasking Machines 00YBVTM-80YBVTM-65VTM-100VTM-200CNC LathesP18P19 Twin Spindle 2-SaddleTurning Centers CNC LathesLB35LB45GENOS L250 -e HJ-250*GENOS L400 -eGENOS L2000-eGENOS L3000-eGENOS L300-M-e*HL-20*HL-35*LH55-N*LT2000 EXLT3000 EXP22 Parallel AluminumSpindle CNCWheelLathesApplications Vertical LathesLU3000 EXLU4000 EXLU7000 EXLU35LU45LU-S1600SPL-200 0SV250 *2SP-150H2SP-250H2SP-10HG *2SP-35HG /BMF-46VA/BMP-46VGENOS M460-VE-eGENOS M560-V-eP28MCR-BMILLAC 44V *MILLAC 468V *MILLAC 561V *MILLAC 611VMILLAC 761VMA-500HMA-600HMILLAC 852VMILLAC 000HMB-10000HMILLAC 44H *MILLAC 55H * Double-Column Machining CentersMCR-CGrindersMCR-A5CP26 Horizontal Machining CentersMA-550VBMA-650VB Double-Column Machining Centers (5-Sided Applications)Machining CentersMachining Centers Vertical Machining CentersMCR-AFMCV-AGrindersIT / CNCP30 CNC Internal GrindersP31 Next-GenerationIntelligent CNCP32 CAD/CAM System for Parts MachiningIT / CNC CNC Cylindrical GrindersADMAC-Parts[With 3D Virtual Monitor]GA14/15WGP14/15WCNC LathesLB2000 EXLB3000 EXLB4000 EXLB2500 EXP21P20 1-Saddle CNC Lathes5-Axis Machining CentersMultitasking Machines 5-Axis VerticalMachining 36/47FGP-36/47F5GI-2N-SP*GI-10NGI-20NOSP-P300AOSP suite* Not available with CE conformity certification.6
Super Multitasking MachinesGoing beyond conventional machine tools, doing the all of metalworkingThe laser technology infused in these super multitasking machines (LASER EX Series) combine subtractive and additivemanufacturing, hardening, and coating of workpiece blanks to the final product—done on one machine—the ultimateprocess-intensive machine.Handles workpieces of various sizes and shapesExamplesPrecision hardeningHard coatingHigh-resolution 3D printingPartial repairLASER EX series produces manufacturing innovations5-Axis Machining Centers.Multitasking MachinesConventional(subtractive)Innovative(super multitaskingmachines at treatmentSurface finishGrindingMaterialTurningMillingHeat treatmentSurface itiveSuper Multitasking Machines78Super MultitaskingMachinesSuper MultitaskingMachinesSuper Multitasking Machines
5-Axis Machining Centers / Multitasking Machines5-Axis Vertical Machining Centers5-Axis Machining CentersMultitasking Machines5-Axis Machining CentersMultitasking MachinesMU-4000V / MU-5000V / MU-6300V / (ø19.69)ø630(ø24.80)ø800 630 width10,000, 6,00010,000, 6,00010,000, 6,000Table sizemm(in.)(ø15.75)Spindle speedmin-115,000Tool storage(ø31.50 24.80)tools32323232MotorkWVAC 22/18.5 (10 min/cont)VAC 11/7.5 (10 min/cont)VAC 11/7.5 (10 min/cont)VAC 11/7.5 (10 min/cont)Machine size(W D H)mm2,400 3,250 2,9503,995 2,750 3,4354,850 2,990 3,5255,280 2,990 3,625LLLSpec extension(hp)(in.)(30/25)(94.49 127.95 116.14)(15/10)(157.28 108.27 135.24)(15/10)(190.94 117.72 138.78)(15/10)(207.87 117.72 142.72)LL: Turning specification910
5-Axis Vertical Machining Centers5-Axis Horizontal Machining CenterMU-10000H5-Axis Machining CentersMultitasking MachinesSpecifications for 2 connected machines1,000 1,000mmø1,500 1,125(in.)Max workpiece dimensionsSpecifications for single machinemm(in.)(39.37 39.37)(ø59.06 44.29)Spindle speedmin-1Tool storagetools81MotorkWVAC 45/37 (20 min/cont)Machine size(W D H)mm6,880 10,830 3,580(hp)(in.)6,000(60/50)(270.87 426.38 140.94)Large 5-Axis Machining CentersMU-S600V400 400Table sizemm(in.)(15.75 15.75)Spindle speedmin-112,000Tool storagetools16MotorkW15/11 (25%ED/cont)Machine size(W D H)mm1,400 3,315 2,994MILLAC 800VH / MILLAC 1000VH(20/15)(hp)(in.)MILLAC 800VH(55.12 130.51 117.87)mmTable size(in.)Spindle speedminTool storage-1MILLAC 1000VH800 8001,000 1,00010,0006,000(31.50 31.50)(39.37 39.37)tools8040MotorkWVAC 22/18.5 (15 min/cont)(hp)(30/25)VAC 22/18.5 (30 min/cont)Machine size(W D H)mm4,800 6,400 3,6505,228 7,117 4,455OSP / FANUCOSP / FANUC(in.)CNC(188.98 251.97 143.70)(30/25)(205.83 280.20 175.39)5-Axis High-Speed Blade MachineBLADE T400MU-400V Ⅱø400Table sizemm(in.)(ø15.75)Spindle speedmin-18,000Tool storageMotorMachine size(W D H)tools20kWVAC 11/7.5 (10 min/cont)(hp)(15/10)2,160 2,810 2,946mm(85.04 110.63 115.98)(in.)11Max turning diaømm400 (Max swing)Max work lengthmm1,500Spindle speedmin-118,000Tool storagetools40MotorkWVAC 38/28 (30 min/cont)Machine size(W D H)mm6,750 3,236 .74 127.40 120.67)* Does not include coolant tank125-Axis Machining CentersMultitasking MachinesPallet size
Intelligent Multitasking MachinesIntelligent Multitasking MachinesMULTUS U3000 / MULTUS U4000 / MULTUS U50005-Axis Machining CentersMultitasking Machines5-Axis Machining CentersMultitasking MachinesMULTUS B200Ⅱ / MULTUS B250Ⅱ / MULTUS B300 Ⅱ / MULTUS B400ⅡMULTUS B200 ⅡMULTUS B250 ⅡMULTUS B300 Ⅱin.68810Max machinig .95)Max work lengthmm550, 750(29.53)900(35.43)1,500, 2,000(in.)(21.65, 29.53)750Spindle speedmin-16,0005,0005,000tools20202020kWPREX 11/7.5 (20 min/cont)VAC 22/15 (30 min/cont)VAC 15/11 (20 min/cont)VAC 22/15 (50% ED/cont)Standard chuck sizeTool storageMotorMachine size(W D H)(15/10)(hp)3,080 2,210 2,582mm(in.)(121.26 87.01 101.65)3,620 2,210 2,582(30/20)(59.06, 78.74)3,800(20/15)3,620 2,210 2,5824,035 2,257 2,587WW(142.52 87.01 101.65)(158.86 88.86 101.85)(142.52 87.01 101.65)(30/20)5,750 2,693 3,000(226.38 106.02 118.11)7,050 2,693 3,137(277.56 106.02 123.50)WSpec extensionMULTUS B400 ⅡWW: Opposing spindleMULTUS B550 / MULTUS B750MULTUS U3000MULTUS U4000MULTUS U5000in.81015Max machinig diaømm650(25.59)650(øin.)(25.59)650(25.59)Max work lengthmm1,000, 1,500(39.37, 59.06)1,500, 2,0001,500, 2,000(in.)Spindle speedmin-15,0004,2003,000Tool storagetools404040kWVAC 22/15 (30 min/cont)PREX 22/15 (30 min/cont)PREX 37/30 (30 min/cont)4,925 2,995 2,9555,425 2,995 2,9555,425 2,995 2,9556,175 2,995 2,955(243.11 117.91 116.34)(247.24 117.91 116.34)W, 2S, 2SWW, 2S, 2SWW, 2S, 2SWStandard chuck sizeMotorMachine size(W D H)Spec extension(hp)mm(in.)(30/20)(193.89 117.91 116.34)(213.58 117.91 116.34)(59.06, 78.74)(30/20)(213.58 117.91 116.34)(59.06, 78.74)(50/40)5,530 2,995 2,955(217.72 117.91 116.34)6,280 2,995 2,955W: Opposing spinde, 2S: 2 saddleMULTUS B550MULTUS B750in.1515Max machinig diaømm830(øin.)(32.68)1,050Max work lengthmm2,000, 3,000(in.)(78.74, 118.11)(118.11, 157.48, 236.22)Spindle speedmin-13,0002,000Tool storagetools4040kWPREX 37/30 (30 min/cont)VAC 37/30 (30 min/cont)8,030 3,258 3,307(359.45 128.27 130.20)9,130 3,532 3,557(359.45 139.06 140.04)10,555 3,532 3,607(415.55 139.06 142.01)13,505 3,797 3,610WWStandard chuck sizeMotorMachine size(W D H)Spec extension(hp)mm(in.)(41.34)3,000, 4,000, 6,000(50/40)(316.14 128.27 130.20)9,130 3,258 3,307(50/40)(531.69 149.49 142.13)W: Opposing spindle1314
Multitasking Machine5-Axis Vertical Multitasking MachinesVTM-1200YB / VTM-2000YB / VTM-80YB5-Axis Machining CentersMultitasking Machines5-Axis Machining CentersMultitasking MachinesMACTURN 550MACTURN 550Standard chuck sizeMax machining diain.12ømm720(øin.)(28.35)mm2,100, 3,100Spindle speedmin-13,500Tool storagetools32kWVAC30/25 (20 min/cont)Max work lengthMotorMachine size(W D H)(in.)Applicable chuck sizes(82.68, 122.05)(hp)Maximum table sizeMax machining diaMax work length (height)(40/33)6,150 3,073 3,105(242.13 120.98 122.24)mm(in.)7,150 3,073 3,105(281.50 120.98 122.24)Double-Column Multitasking MachinesVTM-80YB—28, 0(øin.)(in.)(47.24)(42.52)(55.12)tools363636kWVAC 30/22 (30 min/cont)VAC 30/22 (30 min/cont)VAC 30/22 (30 min/cont)5,512 5,471 4,2735,970 6,973 4,9675,256 4,860 4,350OSP / FANUCOSP / FANUCOSP / FANUCMachine size(W D H)(hp)mm(in.)(40/30)(40/30)(217.01 215.39 168.23)(235.04 274.53 195.55)Applicable chuck sizesMaximum table size1,250(49.21)(125.98)Max machining diaømm3,500 (Max swing)Max work length (height)mm1,2501,600400160Spindle speedminTool dle speedmin-11,2501,250200Tool storagetools363636kWVAC 30/22 (30 min/cont)VAC 30/22 (30 min/cont)VAC 30/22 (30 min/cont)4,001 2,990 4,0004,286 3,175 4,3005,561 5,258 4,603OSP / FANUCOSP / FANUCOSP / FANUCtools2323kWVAC 45/37 (30 min/cont)VAC 55/45 (30 min/cont)Machine size(W D H)mm6,550 3,693 5,0008,615 5,374 6,100(hp)(in.)(60/50)(257.87 145.39 196.85)(25.59)mm(in.)(75/60)(339.17 211.57 0)(49.21)9152,0003,200(62.99)610(36.02)CNC1,600 (Max swing)—ømm1,000VTR-350A(øin.)VTM-200650Machine size(W D H)ømmVTM-10024, 28, 32, 36(24.02)MotorVTR-160AVTM-6518, 21, 24(øin.)Max work length (height)-1(206.93 191.34 171.26)in.ømmMax machining dia(in.)(40/30)Vertical Multitasking MachinesVTM-65 / VTM-100 / VTM-200(øin.)(44.69)Tool storageCNCVTR-160A / VTR-350AMaximum table size800min-1MotorW: Opposing spindle, 2S: 2 saddleVTM-2000YB36, 40Spindle speedW, 2SSpec extensionVTM-1200YBin.16(40/30)(157.52 117.72 157.48)(39.37)(40/30)(168.74 125.00 169.29)(78.74)(40/30)(218.94 207.01 181.22)
CNC Lathes1-Saddle CNC LathesLB2000 EX Ⅱ / LB3000 EX ⅡLB4000 EX Ⅱ / LB2500 EX ⅡLB2000 EX ⅡLB3000 EX ⅡLB4000 EX Ⅱin.68108Max turning diaømm(øin.)430(16.93)410(16.14)480(18.90)410Max work lengthmm300, 500500, 1,000, 1,300750, 1,500, 2,150(29.53, 59.06, 84.65)(5.91)6,0005,0004,2005,000V12V12V12V12PREX 11/7.5 (20 min/cont)VAC 22/15 (30 min/cont)PREX 30/22 (30 min/cont)VAC 22/15 (30 min/cont)2,340 1,749 1,8393,050 1,900 1,9553,420 2,041 1,9754,175 2,390 2,1574,344 2,162 1,9755,515 2,505 2,005M, W, MY, MW, MYWM, MYSpindle speed(in.)min-1TurretMotorMachine size(W D H)kW(hp)(11.81, 19.69)(19.69, 39.37, 51.18)(15/10)(30/20)1,980 1,734 1,839mm(in.)(92.13 68.86 72.40)(77.95 68.27 72.40)(134.65 80.35 77.76)2,290 1,734 1,839(90.16 68.27 72.40)(171.02 85.12 77.76)Spec extensionM, W, MY, MWLB2500 EX Ⅱ(16.14)150(40/30)(30/20)(120.08 74.80 76.97)1,880 1,734 1,770(164.37 94.09 84.92)(74.02 68.27 69.69)(217.13 98.62 78.94)MM: Milling, W: Sub-spindle, Y: Y-axisLB35ⅢLB45Ⅲin.1215Max turning diaømm(øin.)460(18.11)660(25.98)Max work lengthmm850, 1,500, 2,0001,000, 2,000, 3,000, 4,000Spindle speedmin-13,2002,800V12V12kWVAC 30/22 (30 min/cont)VAC 37/30 (30 min/cont)Standard chuck size(in.)TurretMotor(hp)(33.46, 59.06, 78.74)(39.37, 78.74, 118.11, 157.48)(40/30)(50/40)4,260 3,145 2,5874,015 2,663 2,210Machine size(W D H)(167.72 123.82 101.85)(158.07 104.84 87.01)mm(in.)5,760 3,145 2,617(226.77 123.82 103.03)4,885 2,663 2,325(192.32 104.84 91.54)7,010 2,920 2,505(275.98 114.96 98.62)5,910 2,663 2,3258,570 3,181 2,545(232.68 104.84 91.54)(337.40 125.24 100.20)Spec extensionMM, MYM: Milling, Y: Y-axis1718CNC LathesCNC LathesStandard chuck size
1-Saddle CNC Lathes2-Saddle CNC LathesHL-20 / HL-35LU3000 EX / LU4000 EX / LU7000 EXLU3000 EXLU4000 EXin.81021, 24Max turning diaømm410480U: 900, L: 670Max work lengthmmStandard chuck sizeSpindle speed(16.14)(øin.)minTurretkW(25.59, 49.21)650, 1,2502,0005,0004,2001,500Machine size(W D H)mm(78.74)U: V12, L: V8U: V12, L: V10U: V12, L: V10VAC 22/15 (30 min/cont)PREX 22/15 (30 min/cont)VAC 45/37 (30 min/cont)2,950 2,176 2,0803,570 2,310 2,2003,980 2,478 2,2294,780 2,620 2,440(281.38 128.19 129.92)M, 2M, MY, WM, MYM(30/20)(hp)(35.43, 26.38)(23.62, 39.37)-1Motor(18.90)600, 1,000(in.)LU7000 EX(30/20)(116.14 85.67 81.89)(in.)(140.55 90.94 86.61)(156.69 97.56 87.76)Spec extension(60/50)7,147 3,256 3,300(188.19 103.15 96.06)M: Upper multitasking turret, 2M: Upper and lower multitasking turret, Y: Y-axis, W: Sub-spindleGENOS L250 -e*1GENOS L2000-e*1GENOS L3000-e*1GENOS L300-M-e*1in.81081010Max turning 5.35)300(11.81)Max work 69)450, 1,060(17.72, 41.73)Spindle 11/7.5/7.5 (10 min/30 min/cont)VAC 11/7.5 (30 min/cont)VAC 15/11 (20 min/cont)VAC 22/15 (20 min/cont)VAC 15/11 (30 min/cont)TurretMotorMachine size(W D H)(15/10/10)(hp)(15/10)(20/15)(30/20)1,482*2 1,843 1,620mm(58.35 72.56 63.78)(in.)2,280 1,860 1,7912,015 1,843 1,620(89.76 73.23 70.51)2,545 1,870 1,791(79.33 72.56 63.78)(100.20 73.62 70.51)HJ-250HL-20HL-35LH55-N881018Max turning 39.37)Max work lengthmm330460610, 1,0202,000, 3,000, 4,000, 6,000(in.)(12.99)(18.11)(24.02, 40.16)(78.74, 118.11, 157.48, 236.22)Spindle speedmin-13,0003,2003,5001,200V8V8V12V8, H6, H4kWAC 7.5/5.5 (15 min/cont)AC 15/11 (30 min/cont)AC 18.5/15 (30 min/cont)VAC 45/37 (30 min/cont)(10/7.5)(20/15)Turret(W D H)(hp)mm(in.)CNC1,595 1,589 1,5901,810 1,600 1,795(62.80 62.56 62.60)(71.26 62.99 70.67)FANUC(25/20)(60/50)2,430 1,630 1,8957,093 5,685 2,418(95.67 64.17 74.61)8,093 5,685 2,4183,370 1,630 0(25.59)Max work lengthmm920, 1,570, 2,0701,000, 2,000, 3,000(39.37, 78.74, 118.11)(18.90, 21.65, 39.37)(3.94)Spindle speedmin-13,2002,8004,0004,000U: V12, L: V10U: V12, L: V10U/L: V6L/R: V8kWVAC 30/22 (30 min/cont)VAC 37/30 (30 min/cont)VAC 11/7.5 (30 min/cont)AC 15/11 (30 min/cont)4,535 2,872 2,5904,750 3,340 3,0425,185 3,040 2,5906,060 3,355 3,0405,935 3,095 2,5908,020 3,005 2,822MM(in.)(hp)Machine size(W D H)(36.22, 61.81, 81.50)(40/30)(178.54 113.07 101.97)mm(in.)(204.13 119.69 101.97)(233.66 121.85 101.97)Spec extension(6.30)(15/10)(50/40)2,913 1,980 2,054(187.01 131.50 119.76)(114.69 77.95 80.87)3,748 2,282 2,247(238.58 132.09 119.69)in.68ømm(øin.)210(8.27)350(13.78)Max work lengthmm(in.)130(5.12)200(7.87)Spindle speedmin-16,0005,000TurretkWMotor(hp)Machine sizemm(in.)(W D H)Spec extensionU/L: M-V16U/L: M-V16L/R: VAC 11.5/7.5 (5 min/cont)L/R: VAC 22/15 (30 min/cont)(15/10)3,745 2,464 2,285(147.44 97.01 89.96)MY, 3T(30/20)4,504 2,750 2,650(177.32 108.27 104.33)MY, 3T(20/15)1,550 1,935 2,015(61.02 76.18 79.33)(315.75 118.31 111.10)OSP / FANUCFANUCM: Upper multitasking turretLOC500 / LOC650LOC500LOC650in.15, 18, 2433, 40Max turning diaømm(øin.)660(25.98)650, 500(25.98, 19.69)Max work lengthmm1,990, 1,980, 1,9301,7502,000, 1,500, 1,000500, 350U: V12, L: V10U: V12, L: V837/30, 45/37, 55/4545/37Applicable chuck sizesSpindle speed(in.)min-1TurretMotorMachine size(W D H)M: Milling, Y: Y-axis, 3T: 3-turret19100(147.56 89.84 88.46)LT3000 EXMax turning diaStandard chuck size(7.87)480, 550, 1,000CNCLT2000 EXSPL-200in.Motor(357.99 223.82 95.20)LU-S1600ømm(318.62 223.82 95.20)9,093 5,685 2,418LU45ⅡMax turning diaTurretTwin Spindle Turning CentersLT2000 EX / LT3000 EXLU35ⅡStandard chuck size(279.25 223.82 95.20)(132.68 64.17 74.61)FANUCMY, MW, MYWM: Milling, W: Sub-spindle, Y: Y-axisin.Machine size(100.39 70.51 68.54)3,537 2,333 1,934(139.25 91.85 76.14)M*1 Specifications may vary in different markets. *2 Cylinder cover not included.Motor(20/15)2,550 1,791 1,741Spec extensionStandard chuck sizeCNC LathesCNC LathesStandard chuck sizeGENOS L400 -e*120kW(hp)mm(in.)(78.35, 77.95, 75.98)(50/40, 60/50, 75/60)6,060 3,205 3,042(238.58 126.18 119.76)6,160 3,205 3,042(242.52 126.18 119.76)(68.90)(60/50)7,055 3,129 2,843(277.76 123.19 111.93)
Vertical CNC LathesParallel Spindle CNC LathesV760EX / V920EXV40R / V100R2SP-150H / 2SP-250H2SP-10HG / 2SP-35HG2SP-150H2SP-V760EX2SP-V40in.68610150 [220]*[5.91 (8.66)]250 [350]*[9.84 (13.78)]100(3.94)380Max work lengthmm80 [150]*60 [200]*100Spindle speedmin-1CNC Lathes(øin.)(in.)[3.15 (5.91)]kW(hp)mm3,2005,0002,000L/R: V12L/R: V8L/R: V12VAC 11/7.5 (30 min/cont) 2VAC 18.5/15 (30 min/cont) 2VAC 7.5/5.5 (30 min/cont) 2VAC 18.5/15 (30 min/cont) 21,850 2,150(machine only)2,300 2,625(machine only) 2,648 (max loader ht) 3,093 (max loader ht)1,650 1,857 2,8612,400 3,200 2,835MMMMOSP / FANUCOSPFANUCOSP / FANUC(15/10)(in.)V920EXV40R[2SP-V40]V100Rin.15, 18, 21, 2424, 28, 32, 3612, 15, 1836, 40Max turning ax work length 4)Spindle speedmin-12,0001,2502,5001,250V12V12V12V12kWVAC 30/22 (30 min/cont)VAC 30/22 (30 min/cont)VAC 22/18.5 (30 min/cont)VAC 30/22 (30 min/cont)Machine size(W D H)Spec extensionCNCmm(in.)(40/30)(72.52 107.56 137.36)[3,680 2,732 3,489](30/25)1,705 2,788 3,0402,252 2,845 3,693(88.66 112.01 145.39)(144.88 107.56 137.36)(67.13 109.76 119.69)[2,970 2,738 3,040](72.83 84.65)(25/20)( 104.25)(10/7.5)(90.55 103.35)(25/20)(64.96 73.11 112.64)(94.49 125.98 111.61)( 121.77)* Machine capacity without loader 1,842 2,732 3,489230(3.94)L/R: V12Spec extension(hp)[2.36 (7.84)](14.96)Aluminum Wheel Applications(39.37)890LAW-2S / LAW-V24 / LAW-FⅡ(40/30)2,735 3,445 3,510(107.68 135.63 138.19)(116.93 107.80 119.69)MM, ATCMMOSP / FANUCOSP / FANUCOSP / FANUCOSP / FANUC*M: Milling specsSV250Applicable chuck sizesMax turning diain.ømm250(øin.)(9.84)Max work length (height) mm(in.)(13.78)Spindle speedmin-1Turret3506,000Max turning diaømmV12Max work lengthmmMotorkWVAC 15/11 (short time/cont)Machine size(W D H)mm950 2,600 2,445Spec extensionCNC218, 10(hp)(in.)(20/15)(37.40 102.36 96.26)MOSP / FANUC*M: Milling specsSpindle speed(øin.)LAW-2SLAW-V24U: 630, L: 480660(24.80, 4.41)280(25.98)(11.02)3,0003,000U: V6, L: V4L/R: V6V12MotorkWVAC 55/45 (20 min/cont)VAC 55/45 (20 min/cont)VAC 37/30 (30 min/cont)Machine size(W D H)mm4,973 2,580 2,8503,650 3,720 3,8813,522.2 2,800 2,250(hp)(in.)(75/60)(75/60)(195.79 101.57 112.20)(143.70 146.46 152.80)22(50/40)(138.66 110.24 88.58)M: MillingCNC LathesMachine size(W D H)Motor2SP-35HGømmMotorTurret2SP-10HGMax turning diaStandard chuck sizeTurretApplicable chuck sizes2SP-250H
Machining CentersVertical Machining CentersVertical Machining Centers with 2P-APCMB-46VA / MB-46VBMB-56VA / MB-56VBMB-66VA / MB-66VBMF-46VA / MF-46VBMB-46VA/BMB-56VA/BMB-66VA/BMF-46VA/B760 4601,300 560(51.18 22.05)1,530 660(60.24 25.98)760 460 (Pallet size)8,000 / 6,0008,000 / 6,0008,000 / 6,000Table sizemm(in.)(29.92 18.11)Spindle speedmin-18,000 / 6,000Tool storagetools20202020kWVAC 11/7.5 (10 min/cont)VAC 11/7.5 (10 min/cont)VAC 11/7.5 (10 min/cont)VAC 11/7.5 (10 min/cont)MotorMachine size(W D H)(hp)mm(in.)(15/10)1,976 2,810 2,746(77.80 110.63 108.11)2,026 2,810 2,746(15/10)2,546 3,123 2,746(29.92 18.11)(15/10)(15/10)2,406 3,270 2,946(94.72 128.74 115.98)3,035 3,325 3,295(100.24 122.95 108.11)(119.49 130.91 129.72)2,456 3,270 2,946(79.76 110.63 108.11)(96.69 128.74 115.98)Machining CentersMachining CentersVertical Machining Center [For High-Precision Parts and Die/Mold Applications]MP-46V760 460Table sizemm(in.)(29.92 18.11)Spindle speedmin-120,000Tool storagetools20MotorkWVAC 15/11 (10 min/cont)Machine size(W D H)mm2,224 2,734 2,630*(hp)(20/15)(in.)(87.56 107.64 103.54)* Ball screw cooler not includedGENOS M460-VE-e / GENOS M560-V-eGENOS M460-VE-e*mmTable size(in.)-11,000 460GENOS M560-V-e*1,300 560(39.37 18.11)(51.18 22.05)15,00015,000Spindle speedminTool storagetools3232MotorkW22/18.522/18.5Machine size(W D H)mm2,210 2,810 2,7462,564 3,194 2,746(hp)(in.)(30/25)(87.01 110.63 108.11)(30/25)(100.94 125.75 108.11)* Specifications may vary in different markets.2324
Vertical Machining CentersHorizontal Machining CentersMA-500HⅡ / MA-600HⅡMA-400HA / MA-800HB / MA-12500HMA-550VB / MA-650VBMA-550VBmmTable sizeSpindle speedminTool storageMA-650VB1,300 560(in.)1,530 660(51.18 22.05)(60.24 25.98)6,0006,000-1tools3232MotorkWVAC 22/15/11 (10 min/30 min/cont)VAC 22/15/11 (10 min/30 min/cont)Machine size(W D H)mm3,200 2,862 2,8983,750 3,128 3,030(hp)(30/20/15)(in.)(30/20/15)(125.98 112.68 114.09)(147.64 123.15 119.29)MILLAC 44V Ⅱ /MILLAC 468V Ⅱ / MILLAC 561V Ⅱ / MILLAC 611V Ⅱ /MILLAC 761V Ⅱ / MILLAC 852V Ⅱ / MILLAC 1052V ⅡMILLAC 44V Ⅱmm(15.75 15.75)tools16kWVAC 15/11 (25%ED/cont)(20/15)(hp)1,600 3,440 2,400mm1,600 3,550 2,600(62.99 135.43 94.49)(in.)MILLAC 561V Ⅱ1,350 560MILLAC 611V Ⅱ(53.15 22.05)(62.99 24.02)4,000min6,0006,000Tool storagetools202020MotorkWVAC 18.5/11 (15%ED/cont)VAC 15/11 (30 min/cont)VAC 15/11 (30 min/cont)Machine size(W D H)mm2,265 2,805 2,7902,650 3,285 2,7553,410 3,695 2,910OSP / FANUCOSP / FANUCOSP / FANUC(in.)CNC(25/15)(20/15)(89.17 110.43 109.84)(104.33 129.33 108.46)MILLAC 761V ⅡMA-800HBMA-12500H400 400(15.75 15.75)800 800(31.50 31.50)1,250 1,250ø600 710ø1,400 1,450ø2,000 1,6008,0006,0006,000(19.69 19.69)(24.80 24.80)Max work sizemmø800 1,000ø1,000 1,000(ø39.37 39.37)(ø23.62 27.95)Spindle speedmin-16,0006,000Tool storage(in.)(ø31.50 39.37)(49.21 49.21)(ø55.12 57.09)(ø78.74 62.99)tools4040304081MotorkWVAC 30/22 (10 min/cont)VAC 30/22 (10 min/cont)VAC 15/11 (10 min/cont)VAC 30/22 (10 min/cont)VAC 45/37 (20 min/cont)Machine size(W D H)mm3,110 5,971 3,1733,410 6,495 3,1732,414 4,532 2,7594,745 6,465 3,4606,880 12,412 3,781Pallet sizemmMax work sizemm(in.)(ø23.62 35.43)Spindle speedTool storage(hp)(in.)(40/30)(122.44 235.08 124.92)(40/30)(134.25 255.71 124.92)(20/15)(40/30)(95.04 178.43 108.62)(60/50)(186.81 254.53 136.22)(270.87 488.66 148.86)(in.)MB-4000HMB-5000HMB-8000HMB-10000H400 400500 500800 8001,000 1,000(15.75 15.75)(19.69 19.69)(31.50 31.50)ø600 900ø800 1,000ø1,450 1,450ø1,400 kWVAC 26/18.5 (10 min/cont)VAC 26/18.5 (10 min/cont)VAC 30/22 (10 min/cont)VAC 30/22 (10 min/cont)Machine size(W D H)mm2,420 4,700 2,6472,700 4,710 2,8643,960 7,505 3,4494,545 6,465 3,410(hp)(in.)(35/25)(95.28 185.04 104.21)(ø31.50 39.37)(39.37 39.37)(ø57.09 57.09)(35/25)(ø55.12 57.09)(40/30)(106.30 185.43 112.76)(40/30)(155.91 295.47 135.79)(178.94 254.53 134.25)1,600 610(41.34 18.11)Spindle speed(hp)MA-400HA630 630(in.)(62.99 139.76 102.36)OSP / FANUC1,050 460MA-600HⅡ500 500mm12,000minTool storageMILLAC 468V Ⅱ-1(Pallet) 400 400-1CNC(in.)630 400Spindle speedMachine size(W D H)mm2APC(24.80 15.75)(in.)MotorTable sizeStandardMA-500HⅡPallet sizeMILLAC 44HⅡ / MILLAC 55HⅡ(20/15)(134.25 145.47 114.57)MILLAC 852V ⅡMILLAC 1052V ⅡMILLAC 44HⅡTable sizemmRotary table2APCRotary table2APCø320(Pallet) 320 320ø500(Pallet) 400 400(ø12.60)(in.)MILLAC 55HⅡ(12.60 12.60)(ø19.69)(15.75 15.75)ø400 500ø500 600Table sizemm(in.)(70.87 28.35)(8
Okuma is a comprehensive machine tool manufacturer which produces not only multitasking machines, lathes, machining centers and grinders, but also control systems and peripheral equipment. . GENOS L400 -e GENOS L2000-e GENOS L3000-e GENOS L300-M-e LB35 LB45 LT2000 EX LT3000 EX LU3000 EX LU4000 EX LU7000 EX LU-S1600 SPL-200* V760EX V920EX V40R .
decoration machine mortar machine paster machine plater machine wall machinery putzmeister plastering machine mortar spraying machine india ez renda automatic rendering machine price wall painting machine price machine manufacturers in china mail concrete mixer machines cement mixture machine wall finishing machine .
Machine tools are power-driven equipment designed to drill, bore, grind, or cut metal or other material. LISTING OF MACHINE TOOLS A complete list of machine tools including specialized machine tools currently authorized for issue is in Component List C 3405/70-lL. SPECIALIZED MACHINE TOOLS In view of the
Introduction to machine and machine tools Research · April 2015 DOI: 10.13140/RG.2.1.1419.7285 CITATIONS 0 READS 43,236 1 author: . machine and power hacksaws lathe machine, Planer lathe machine, Sloter lathe machine etc. Basics of Mechanical Engineering (B.M.E) Brown Hill College of Engg. & Tech.
Pro Tools 9.0 provides a single, unified installer for Pro Tools and Pro Tools HD. Pro Tools 9.0 is supported on the following types of systems: Pro Tools HD These systems include Pro Tools HD software with Pro Tools HD or Pro Tools HD Native hard-ware. Pro Tools These systems include Pro Tools software with 003 or Digi 002 family audio .
a) Plain milling machine b) Universal milling machine c) Omniversal milling machine d) Vertical milling machine 2. Table type milling machine 3. Planer type milling machine 4. Special type milling machine 5.2.1 Column and knee type milling machine The column of a column and knee
1.Shaper Machine, 2. Lathe Machine, 3. Drilling Machine, 4. Grinding Machine Table 1 shows the summary of all man machine chart and Table 2 shows the man machine chart for shaping machine and same way we have prepared the man machine chart for other machines. Table 3 Man Machine Charts Summary
Liebherr-Gear Technology Inc. Machine tools Liebherr Automation Systems Co. Automation systems 1465 Woodland Drive Saline, MI 48176-1259, USA 1 7344 297225 Fax 1 7344 292294 info.lgt@liebherr.com Liebherr-Machine Tools India Pvt. Ltd Machine tools 353/354, 4th Main, 9th Cross, 4t
Albert Woodfox and Herman Wallace were convicted of the murder in 1972 of prison guard Brent Miller. They were placed in isolation together with a third man, Robert King, who was accused of a different crime. Robert King was released in 2001 after serving 29 years in solitary. Herman Wallace and Albert Woodfox remain in solitary confinement in .
