SUNNY BEAM USB Driver - Installing The Sunny Beam USB
SUNNY BEAM USB DriverInstalling the Sunny Beam USB DriverVersion:1.41 Sunny Beam USB DriverThe Sunny Beam USB driver is needed to connect a Sunny Beam to a computer.System requirements:The Sunny Beam USB driver supports the following operating systems: Windows 2000 Windows XP (32-bit and 64-bit) Windows Vista (32-bit and 64-bit) Windows 7 (32-bit and 64-bit)User Manual1/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the Driver2 Installing the Driver2.1 Downloading the DriverRequired material: Computer with a zip program Internet access Supported operating system (see section 1 "Sunny Beam USB Driver" (page 1)). Sunny Beam.1. Switch on the computer.2. Create a new folder on your computer and name it "Sunny Beam", for example.3. Download the Sunny Beam USB driver from the download area at www.SMA.de/en:– Select the Sunny Beam USB driver for your operating system.– Click Open in the "File Download" window.– Save the zip file on your computer.– Using your zip program, unzip the files in the folder you created earlier.User Manual2/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the Driver2.2 Installing the Driver2.2.1 Installing the Driver on Systems Operating Windows XP/Windows 2000Installation of the driver is the same for Windows XP and Windows 2000.Drivers for 2 hardware components have to be installed.Procedure: Installing the driver for Sunny Beam USB UART Installing the driver for USB Serial PortWindows Logo testingDuring the installation process of an SMA Windows driver, Windows will warn you thatthe software you are installing has not passed the Windows Logo testing.This warning is displayed when third-party drivers are installed. It indicates that themanufacturer's driver has not been tested in the Microsoft "Windows Hardware QualityLabs (WHQL)".SMA Solar Technology AG has tested and approved the driver's functionality. You canignore the recommendation from Microsoft to abort the installation and proceed with theinstallation of the driver.Installing the driver for Sunny Beam USB UART1. Connect the Sunny Beam to your computer usingthe USB cable provided. The "Found New Hardware Wizard" windowopens.– The "Found New Hardware Wizard" windowdoes not open?– See section 3 "Starting the Add HardwareWizard Manually" (page 15).User Manual3/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the Driver2. If the window shows the question "Can Windowsconnect to Windows Update to search forsoftware?" select No, not this time and click[Next ].3. If the window shows the question "What do youwant the wizard to do?" select Install from a listor specific location (Advanced) and click[Next ].4. Click [Browse] and select the folder in which theunzipped driver files are saved.5. Click [Next ].6. Click [Continue Anyway]. The installation starts.User Manual4/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the Driver "Found New Hardware Wizard" opens.7. Click [Finish]. The "Found New Hardware Wizard" windowopens.– The "Found New Hardware Wizard" windowdoes not open?– See section 3 "Starting the Add HardwareWizard Manually" (page 15).Installing the driver for USB Serial Port1. Select Install from a list or specific location(Advanced) field and click [Next ].2. Click Browse and select the folder in which theunzipped driver files are saved.3. Click [Next ].4. Click [Continue Anyway]. The installation starts.User Manual5/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the Driver5. Click [Finish]. Both drivers are installed.User Manual6/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the Driver2.2.2 Installing the Driver on Systems Operating Windows Vista.Drivers for 2 hardware components have to be installed.Procedure: Installing the driver for Sunny Beam USB UART Installing the driver for USB Serial PortWindows SecurityDuring the installation process of an SMA Windows driver, Windows will warn you that itcannot verify the publisher of the driver software.This warning is displayed when third-party drivers are installed. It indicates that themanufacturer's driver has not been tested in the Microsoft "Windows Hardware QualityLabs (WHQL)".SMA Solar Technology AG has tested and approved the driver's functionality. You canignore the recommendation from Microsoft to abort the installation and proceed with theinstallation of the driver.Installing the driver for Sunny Beam USB UART1. Connect the Sunny Beam to your computer using the USB cable provided. The "Found New Hardware" window opens.– The "Found New Hardware" window does not open?– See section 3 "Starting the Add Hardware Wizard Manually" (page 15).2. Click Locate and install driver software(recommended).User Manual7/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the Driver3. Click I don't have the disc. Show me otheroptions.4. Click Browse my computer for driver software(advanced).5. Click [Browse.] and select the folder in which theunzipped driver files are saved.6. Click [OK].7. Click [Next].8. Click Install this driver software anyway. The installation starts.User Manual8/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the Driver The "Found New Hardware - Sunny Beam USBUART" window opens.9. Click [Close]. The "Found New Hardware - USB Serial Port"window opens.– The "Found New Hardware - USB Serial Port"window does not open?– See section 3 "Starting the Add HardwareWizard Manually" (page 15).Installing the driver for USB Serial Port1. Click I don't have the disc. Show me otheroptions.2. Click Browse my computer for driver software(advanced).3. Click [Browse.] and select the folder in which theunzipped driver files are saved.4. Click [OK].5. Click [Next].User Manual9/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the Driver6. Click Install this driver software anyway. The installation starts. The "Found New Hardware - USB Serial Port(COMx)" window opens.7. Click [Close]. Both drivers are installed.2.2.3 Installing the Driver on Systems Operating Windows 7.Drivers for 2 hardware components have to be installed.Procedure: Installing the driver for Sunny Beam USB UART Installing the driver for USB Serial PortWindows SecurityDuring the installation process of an SMA Windows driver, Windows will warn you that itcannot verify the publisher of the driver software.This warning is displayed when third-party drivers are installed. It indicates that themanufacturer's driver has not been tested in the Microsoft "Windows Hardware QualityLabs (WHQL)".SMA Solar Technology AG has tested and approved the driver's functionality. You canignore the recommendation from Microsoft to abort the installation and proceed with theinstallation of the driver.User Manual10/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the DriverInstalling the driver for Sunny Beam USB UART1. Connect the Sunny Beam to your computer using the USB cable provided.2. Click Start.3. Right click on My Computer and select Properties.4. Click Device Manager.5. Click Other devices.6. Right click on Sunny Beam and select UpdateDriver Software.7. Click Browse my computer for driversoftware.8. Click [Browse.], select the folder in which theunzipped driver files are saved and click [OK].9. Click [Next].User Manual11/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the Driver10. Click Install this driver software anyway. The installation starts. The "Update Driver Software - Sunny Beam USBUART" window opens.11. Click [Close].User Manual12/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the DriverInstalling the driver for USB Serial Port1. Click Start.2. Right click on My Computer and select Properties.3. Click Device Manager.4. Click Other devices.5. Right click on USB Serial Port and select UpdateDriver Software.6. Click Browse my computer for driversoftware.7. Click [Browse.] and select the folder in which theunzipped driver files are saved.8. Click [OK].9. Click [Next].User Manual13/21SBeamUSB-BEN103814
SMA Solar Technology AGInstalling the Driver10. Click Install this driver software anyway. The installation starts. The "Update Driver Software - USB Serial Port(COMx)" window opens.11. Click [Close]. Both drivers are installed.User Manual14/21SBeamUSB-BEN103814
SMA Solar Technology AGStarting the Add Hardware Wizard Manually3 Starting the Add Hardware Wizard ManuallyIf the Add Hardware Wizard does not start automatically when you connect new hardware to thecomputer, you can also start the Add Hardware Wizard manually.Starting the Add Hardware Wizard manually on systems operatingWindows XP/Windows 20001. Click Start Settings Control Panel System Hardware Device Manager. "Sunny Beam" is listed under "Other devices".– "Sunny Beam" is not listed under"Other devices"?– Check whether "Sunny Beam" is listed under"USB Controller".2. Right click on Sunny Beam and select UpdateDriver. Add Hardware Wizard opens.User Manual15/21SBeamUSB-BEN103814
SMA Solar Technology AGStarting the Add Hardware Wizard ManuallyStarting the Add Hardware Wizard manually on systems operating WindowsVista1. Click Start.2. Right click on My Computer and select Properties.3. Click Device Manager. "Sunny Beam" is listed under "Other devices".– "Sunny Beam" is not listed under "Other devices"?– Check whether "Sunny Beam" is listed under "USB Controller".4. Right click on Sunny Beam and Update DriverSoftware. Add Hardware Wizard opens.User Manual16/21SBeamUSB-BEN103814
SMA Solar Technology AG4Uninstalling the DriverUninstalling the Driver4.1 Uninstalling the Driver on Systems Operating Windows XP/Windows 2000You can uninstall the Sunny Beam USB driver if you no longer need it.Uninstalling the driver for USB UART1. Click Start Settings Control Panel System Hardware Device Manager. "Sunny Beam" is listed under "Other devices".– "Sunny Beam" is not listed under "Other devices"?– Check whether "Sunny Beam" is listed under "USB Controller".2. Right click on Sunny Beam and select Uninstall.3. Click [OK] in the "Confirm Device Removal" window.Uninstalling the driver for USB Serial Port1. Click Start Settings Control Panel System Hardware Device Manager. "USB Serial Port" is listed under "Ports (COM and LPT)".2. Right click on "Ports (COM and LPT)" and select Uninstall.3. Click [OK] in the "Confirm Device Removal" window. Both drivers are uninstalled.4.2 Uninstalling the Driver on Systems Operating Windows Vista/Windows 7You can uninstall the Sunny Beam USB driver if you no longer need it.Uninstalling the driver for USBPB1. Click Start.2. Right click on My Computer and select Properties.3. Click Device Manager. "Sunny Beam" is listed under "Other devices".– "Sunny Beam" is not listed under "Other devices"?– Check whether "Sunny Beam" is listed under "USB Controller".4. Right click on Sunny Beam and select Uninstall. Click [OK] in the "Confirm Device Uninstall" window.User Manual17/21SBeamUSB-BEN103814
SMA Solar Technology AGUninstalling the DriverUninstalling the driver for USB Serial Port1. Click Start.2. Right click on My Computer and select Properties.3. Click Device Manager. "USB Serial Port" is listed under "Ports (COM and LPT)".4. Right click on "Ports (COM and LPT)" and select Uninstall.5. Click [OK] in the "Confirm Device Removal" window.6. Both drivers are uninstalled.User Manual18/21SBeamUSB-BEN103814
SMA Solar Technology AGContact5 ContactIf you have technical problems concerning our products, contact the SMA Serviceline. We require thefollowing information in order to provide you with the necessary assistance: Type and serial number of the inverter Serial number of communication interface Type and serial number or version of the communication device (e.g. Sunny Beam,Sunny Explorer) Detailed description of the problemSMA Solar Technology AGSonnenallee 134266 Niestetal, Germanywww.SMA.deSMA ServicelineInverters: 49 561 9522 1499Communication: 49 561 9522 2499Fax: 49 561 9522 4699E-Mail: Serviceline@SMA.deUser Manual19/21SBeamUSB-BEN103814
SMA Solar Technology AGContactThe information contained in this document is the property of SMA Solar Technology AG. Publishing its content, either partially orin full, requires the written permission of SMA Solar Technology AG. Any internal company copying of the document for thepurposes of evaluating the product or its correct implementation is allowed and does not require permission.Exclusion of LiabilityThe general terms and conditions of delivery of SMA Solar Technology AG shall apply.The content of these documents is continually checked and amended, where necessary. However, discrepancies cannot beexcluded. No guarantee is made for the completeness of these documents. The latest version is available online at www.SMA.deor from the usual sales channels.Guarantee or liability claims for damages of any kind are excluded if they are caused by one or more of the following: Damages during transportation Improper or inappropriate use of the product Operating the product in an unintended environment Operating the product whilst ignoring relevant, statutory safety regulations in the deployment location Ignoring safety warnings and instructions contained in all documents relevant to the product Operating the product under incorrect safety or protection conditions Altering the product or supplied software without authority The product malfunctions due to operating attached or neighboring devices beyond statutory limit values In case of unforeseen calamity or force majeureThe use of supplied software produced by SMA Solar Technology AG is subject to the following conditions: SMA Solar Technology AG rejects any liability for direct or indirect damages arising from the use of software developed bySMA Solar Technology AG. This also applies to the provision or non-provision of support activities. Supplied software not developed by SMA Solar Technology AG is subject to the respective licensing and liability agreementsof the manufacturer.SMA Factory WarrantyThe current guarantee conditions come enclosed with your device. These are also available online at www.SMA.de and can bedownloaded or are available on paper from the usual sales channels if required.TrademarksAll trademarks are recognized even if these are not marked separately. Missing designations do not mean that a product or brandis not a registered trademark.The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of these marks by SMASolar Technology AG is under license.SMA Solar Technology AGSonnenallee 1D-34266 NiestetalGermanyTel. 49 561 9522-0Fax 49 561 9522-100www.SMA.deE-mail: info@SMA.de 2004 to 2010 SMA Solar Technology AG. All rights reserved.User Manual20/21SBeamUSB-BEN103814
4." 4PMBS 5FDIOPMPHZXXX 4." 4PMBS DPN4." 4PMBS 5FDIOPMPHZ "(XXX 4." EF4." "NFSJDB -- XXX 4." "NFSJDB DPN4." 5FDIOPMPHZ "VTUSBMJB 1UZ -UE XXX 4." "VTUSBMJB DPN BV4." #FOFMVY 413XXX 4." #FOFMVY DPN4." #FJKJOH PNNFSDJBM P -UE XXX 4." IJOB DPN4." [FDI 3FQVCMJD T S P XXX 4." [FDI DPN4." 'SBODF 4 " 4 XXX 4." 'SBODF DPN4." )FMMBT "&XXX 4." )FMMBT DPN4." *C SJDB 5FDOPMPH B 4PMBS 4 - XXX 4." *CFSJDB DPN4." *UBMJB 4 S M XXX 4." *UBMJB DPN4." 5FDIOPMPHZ ,PSFB P -UE XXX 4." ,PSFB DPN
SMA Solar Technology AG Installing the Driver User Manual 2/21 SBeamUSB-BEN103814 2 Installing the Driver 2.1 Downloading the Driver Required material: Computer with a zip program Internet access Supported operating system (see section 1 "Sunny Beam USB Driver" (page 1)). Sunny
Sunny WebBox / Sunny WebBox with Bluetooth Wireless Technology: Register the Sunny WebBox in Sunny Portal as described in the Sunny WebBox / Sunny WebBox with Bluetooth manuals. SMA Cluster Controller: Register the Cluster Controller in Sunny Portal according to the i
SWR 850, SWR 1500, Sunny Boy Control sowie Preisänderung Juli 96 Änderungen Art. Nr. Sunny Boy Control und Zubehör Sunny Boy sowie Preisänderung Sunny Boy 850E, Reparaturkostenpauschale, geändertes Zubehör sowie Preisänderung Erweiterung Sunny Boy 1100/2000/2500 und SBCOP/ SBCOL
6 D G A Keep on the Sunny Side Carter Family [D]Well there’s a dark and a [G]troubled side of [D]life. There’s a bright and a sunny side [A] too. But if you meet with the darkness and [D]strife, [A] The sunny side we also may [D]view. [D]Keep on the sunny side, [G]always on the sunny side, [D]Keep on the sunny side of [A]life. [D]It wi
The following diagram shows the 3 LEDs, as exemplified by the Sunny Boy 3800. A detailed description of the possible LED signals and blink codes is given in the following section. LED Meaning Inverter Green In operation All Sunny Boys / Sunny Mini Centrals Red Ground fault or varistor defective For the Sunny Boy models SB 1100, SB 1200,
In-box 1m cable or Jabra 1.8m cable How to connect using Anker PowerLine/Newnex cable USB-A USB-C 3m USB-A to USB-C cable How to connect using Startech USB 3.0/USB 2.0 Startech USB Extender Power Adapter USB-A USB-A USB-C In-box
APC Back-UPS USB USB APC Back-UPS RS USB USB APC Back-UPS LS USB USB APC Back-UPS ES/CyberFort 350 USB APC Back-UPS BF500 USB APC BACK-UPS XS LCD USB APC Smart-UPS USB USB APC Back-UPS 940-0095A/C cables APC Back-UPS 940-0020B/C cables APC Back-UPS 940-0023A cable APC Back-UPS Office 940-0119A cable APC Ba
an das Sunny Portal senden kann (siehe Kapitel 2.3 „Systemvorau ssetzungen", Seite 9). Je nachdem, welches SMA Produkt die Daten an das Sunny Portal sendet, stehen unterschiedliche Funktionen im Sunny Portal zur Verfügung. 2.2 SMA Webconnect-Funktion Die SMA Webconnect-Funktion ermöglicht die Datenübertragung zwischen dem Sunny Portal und
3039/D 3039M untuk pengujian tarik dan ASTM D 4255/D 4255M-83 untuk pengujian geser. Serat rami yang digunakan adalah serat kontinyu dengan kode produksi 100% Ne 14’S, menggunakan matriks berupa .
