Raven Viper 4 Firmware 693834 Viper 4 2.0.10.68 12/18/14
Raven Viper 4 – Firmware 693834HMC # 693794ProductRev #Viper 42.0.10.682.0.5.5Date ReleasedChange Description12/18/145/16/14 Feature unlock status page On screen lightbar Additional bug fixes and featuresNew Features: Bin Cleanout Functionality Boom capacity alarm and widget Support for GreenSeeker variable rate application, availablewith software unlock Shapefile field boundary import Field boundary area display Manual pump and fan control in product configuration widget Additional machine profiles Adds support for SideKick Pro injection alarm options Adds support for Slingshot GS and Satellite GS Enhancements to bin chaining Updated field background for improved visibility Updated translations Updated EULAMajor Defects Resolved: System-wide improvements to stability and responsiveness Improvements to serial device detection response time Improvements to system boot time Improvements to Accuboom coverage painting Improvements to file management Fixes issue that occurs when sections not entered in wired asorder Fixes issue with speed source setting reverting from radar towheel Fixes issue that would prevent ability to calibrate or primeSideKick Pro Fixes issue with section position and painting Fixes issue with units displayed for NH3 application on reports Fixes issue with non-consecutive product numbering Fixes to job area and volume calculations Fixes to wind direction indicator in weather station userinterface 2.0.3.141.0.45/9/1411.15.13Fixes and improvements to external lightbar Fixes for display crashing Fixes for Sidekick Pro initial setup Added initial support for the following languages: Spanish,Portuguese, French, German, and Russian.
1.0310.1.13Added profiles for Hagie Sprayers.New Product ReleaseRaven Viper Pro – Firmware 693885HMC # 693401ProductViper ProRev #Date ReleasedChange Description3.1012/18/14 3.908.08.13 HAS NOT BEEN TESTED BY HMC ENGINEERING3.73.25.13 Reconstruction of sidekick Pro diagnostics screen Multiple enhancements to the handling of granular applicationFirmware updates. No major modificationswith the ability for advanced bin-chaining, bin cleanout, andinter-bin delays.Raven Envizio Pro / Envizio XL– Firmware 693887HMC # 693321 / 693638ProductE-Pro / XLRev #Date ReleasedChange Description3.812/18/14 Firmware updates. No major modifications3.712.11.13 HAS NOT BEEN TESTED BY HMC ENGINEERING3.607.02.13 SmarTrax MD Support2.307.08.10Weather Station SupportPrescription map rate bumpLow speed mode enhancement with granular controlMany additional features, but must have an activation key – must contactRaven support if software version is below 2.3.SCS 5000 – HMC # 693667ProductSCS 5000Rev #2.0Date Released6.1.12Change Description This software does not have the “Hagie” Branded LogoSCS 4600 –HMC # 690986ProductSCS 4600Rev #Date ReleasedChange Description2.06.1.12 No details listed1.9012.15.10 New diagnostic screen for use with SideKick Pro
PSI or RPM will display next to the product it is associated with on the run screen (if a RPM or PSI sensor is installed)Speed data now saves in data log files SCS 460 – HMC # 690490ProductRev #Date ReleasedSCS 460Change DescriptionNothing on website? Product Control Node – Firmware 693831identifier “p279” – HMC # 693674ProductPCNRev #2.20.26Date ReleasedChange Description5/9/14 Fixes issue with speed calibration setting being lost on powercycle2.10.146.27.13 HAS NOT BEEN TESTED WITH HMC ENGINEERING2.20.074.10.13 CanBus integration with HMC sprayer MY 2014 Known issues – SCS 5000 does not function correctly whenholding the “increase or decrease” button.Single Product Node- identifier “p149” – HMC # 693404ProductSPNRev #1.54Date Released5.6.13Change Description Older SPN node (Gen I) – no release notes from Raven.Single Product Node- Firmware 693832identifier “p293” - HMC # 693404ProductSPNRev #2.15.07Date Released7.11.13Change Description Newest SPN node (Gen II) – no release notes from Raven.Boom Sense Node- Firmware 693828identifier “p143” – HMC # 693403ProductBSNRev #1.70.02Date Released5.20.13Change Description Single Boom Sense node - no release notes from Raven.
SmarTrax 3D – Firmware 693833identifier “p269” – HMC # 693552Product3DRev #6.0.17Date Released6.22.13Change Description SmarTrax steering node software. Modifications for front mountedbooms.5.8.0612.16.11 Initial software release for front mounted sprayers.Hagie SideKick PRO- Firmware 693830identifier ”p359” – HMC # 701459ProductRev #Date ReleasedSideKick1.21.049.4.13Change Description New Software for Pumps
Raven Precision Help -Page 1 of 2Viper Pro Software Update DetailsVersion: 3.10.1Release Date: 03/31/14[Print this Page]DOWNLOAD UPDATEIf used with a CAN SmarTrax steering system, software version 5.3 or higher is required. It is not recommended for use with aCAN SmarTrax system with any software versions prior to 5.3.This version no longer supports Rbin data files. Rbin files will not be created - also eliminating the need for the desktop Rbinviewer.Any previous job files are not compatible with the 3.6 software release. Please save and remove all previous jobs prior to updatingthe software.Activation code is required to work with AgX pre-populated jobs.NOTE: If the Viper Pro had previously been registered to a Slingshot account please proceed with the following steps. After thesoftware update is complete power-down the Viper Pro, and then re-power the Viper Pro system. From the main home screenpress "Menu", then "Exit", then "Exit to Menu". Then make a selection to re-enter the Viper Pro application software.NOTE: When updating field computer software, Raven recommends confirming that all CAN nodes on the systemhave the most current firmware available.Download and Installation InstructionsNote: This is a clean installation. This will wipe the Viper Pro clean and reinstall software. Please note that allsettings, job files and activation keys will be lost.1. Unzip/Extract to USB drive. If installed correctly you will have a folder named “startup”.2. Insert USB into Viper Pro at the Program Selection List and select on Install Viper puters/Viper-Pro/Software%20Updates/. 12/18/2014
Raven Precision Help -Page 2 of 23. Once the software launches the first of two Clean Install warnings will come up. Select Cancel to load software as normal orselect OK to launch Clean Install.4. Then a Second Warning for Clean Install will come up. Select OK to launch Clean Install or Cancel to load as a normalsoftware update.Release NotesNew Features: Viper Pro 1.6 GHz CAN priorityEnhancements: SeedMaster Gate Alarm Shutdown application errors Job VolumeDOWNLOAD omputers/Viper-Pro/Software%20Updates/. 12/18/2014
Raven support if software version is below 2.3. SCS 5000 – HMC # 693667 Product Rev # Date Released Change Description SCS 5000 2.0 6.1.12 This software does not have the “Hagie” Branded Logo SCS 4600 –HMC # 690986 Product Rev # Date Released Change Descripti
Black/Slate Gray Black/Blue* Viper Snakeskin Green Pearl Viper GTS Blue† Venom Red Metallic Viper Black Viper Blue Metallic Viper Very Orange Pearl Viper Red† Viper Violet Pearl *Black/Blue interior color combination featured on Interior Poster. † Stone White stripe on Roadster only. Black Light Arc Graphite 2008 VIPER SRT10 ROADSTER .
The OmniSite Viper is a low cost, effective Cellular Alarm Monitor that is easy to install and set up. This manual provides the information needed to install the Viper, connect the inputs, and general usage of the product. The main objectives of this guide are to provide: General understanding of File Size: 2MBPage Count: 43Explore furtherGeneral Dynamics Sectera Viper Phone User Manual - investheavyinvestheavy397.weebly.comSecure Voice - General Dynamics Mission Systemsgdmissionsystems.comGeneral Dynamics Sectera Viper User Manual - cleverzencleverzen214.weebly.comSectéra vIPer Phone - General Dynamics Mission Systemsgdmissionsystems.comGeneral Dynamics New Sectéra vIPer Secure Phone Now .gdmissionsystems.comRecommended to you b
Viper Seals/Scrapers for 6 & 8 Strand Ropes Only Viper Seals/Scraper for Amoured & Multi Strand Ropes Only Viper Smooth Bore Rope Cleaner Viper Rope Cleaner 6 Strand Ropes* Viper Rope Cleaner 8 Strand Ropes* Seal Part No. Seal Part No. Right Lay Left Lay Right Lay Left Lay 6mm to 7mm VMISEAL6 VMISEAL8 N/A N/A N/A N/A NA 15/64" to 9/32" 8mm .
Raven 860 Ultra 48 48 48 50 91 - U.S. High quality inks including heatset, sheetfed, and packaging Raven 850 63 63 - 75 101 - U.S. Coatings, inks, and plastisol Raven 820 73 71 120 - 100 - Canada Flexographic ink Raven 790 Ultra 64 64 - 105 95 - U.S. Sealants Raven 780 Ultra 89 77 58 60 109 - U.S. Toner and specialty inks
John Carlye Raven: The Man Aspects of his Personal Life John Carlyle Raven was born in North London in 1902 to John Raven, a warehouseman to the umbrella maker Grant Barnett (who are still in business), and Jane Elizabeth Raven (nee Martin). They had married in St. Matthew's Church, Westminster in 1894. J.C.Raven was the
Stages of a Firmware Upgrade through Firmware Packages in Service Profiles . Cisco UCS B-Series GUI Firmware Management Guide, Release 2.2 9 Upgrading Firmware through Firmware Packages in Service Profiles Updating a Management Firmware Package. Procedure Step 1 IntheNavigationpane,clickServers.
2 Viper/Viper 4 Installation & Operation Manual Follow all safety labels affixed to the system components. Be sure to keep safety labels in good condition and replace any missing or damaged labels. Contact a local Raven dealer to obtain replacements for missing or
B.Sc in Gaming & Mobile Application Development Semester Sl. No Paper Code Subjects Credits Theory Papers T P Total First 1 ENG101 English 3 0 3 2 EMA102 Engineering Math 4 0 4
