REVISION FQ FTSH-1XX-XX-XXX-DV-XXX-XXX C No OF

REVISION FQDO NOTSCALE FROMTHIS PRINTFTSH-1XX-XX-XXX-DV-XXX-XXXNOTES:1. C REPRESENTS A CRITICAL DIMENSION.2. PARTS MAY BE CUT TO POSITION.No OF POSITIONS3. MAXIMUM CUT FLASH: .015[0.38], LOOSE FLASH MUST BE REMOVED.-02 THRU -504. MINIMUM PUSHOUT FORCE: 1.0 LB.(PER ROW)5. MEASURED AT BEND RADIUS, NOT AT END OF PIN.6. TUBE ONLY -04 THROUGH -50 POSITIONS (SEE TABLE 2).LEAD STYLE7. SHEAR TAILS TO DIMENSION SHOWN.-01: .120 [3.05]8. MAXIMUM BURR ALLOWANCE: .003 [0.08]-02: .075 [1.91]9. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL.-03: .065 [1.65]10. FILL WITH ALIGNMENT PIN HOLES TO TAIL SIDE.-04: .150 [3.81]11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, LOCKING CLIPS-05 .170 [4.32]ARE NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS-14: .150 [3.81](NOT AVAILABLEMANUAL PLACEMENT FOR ALL ASSEMBLIES WITH LOCKING CLIPS.12. VOIDS MAY OR MAY NOT BE PRESENT ON POSITIONS 5 THRU 8 AND CANWITH -SM, FM, LM PLATINGBE MIXED WITHIN AN ORDER.OPTIONS)13. ON LEAD STYLES -02 THROUGH -03 THE T-1S15-18-XXX CANBE SUBSTITUTED FOR T-1S15-16-XXX.PLATING SPECIFICATION14. ON LEAD STYLES -01 AND -04, T-1S15-17 CAN BESUBSTITUTED FOR T-1S15-15-XXX.-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,15. NO TIN PLATING ALLOWED ON THE POST FORMATTE TIN ON TAILLEAD STYLES -01, -02, -03 & -04 IN COMBINATION WITH THE-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,T-1S15-XX-XXX TERMINAL.MATTE TIN ON TAIL16. MAXIMUM HEIGHT VARIATION .005[0.13] BETWEEN ROWS.-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,17. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL,MATTE TIN ON TAILBASED ON OPTIONS SELECTED.-H: 30µ" GOLD IN CONTACT AREA,18. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BEPACKAGED ACCORDING TO THE SAMTEC PACKAGING EFFICIENCY3µ" GOLD ON TAILSTANDARDS (SPES) FOUND ON WWW.SAMTEC.COM-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,C 0.13No OF POS x .0500 .005-.014 [ -0.36 ](No OF POS x .0500[1.27]) - .050[1.27]0250.135 3.43REF01FTSH-50-D.016 0.41 SQREF (TYP)2 MAX SWAY(EITHER DIRECTION)POLARIZING OPTIONXXX INDICATES POSITION TO BE OMITTED(NOT AVAILABLE WITH EXX OPTIONS)(ONLY AVAILABLE WITH -F, -FM, -L, -LM PLATING OPTIONS)TAIL OPTION-DV: DOUBLE VERTICAL* NOT ENGINEERING APPROVEDC.050 .008 1.27 0.202 MAX SWAY(EITHER DIRECTION)SEE TABLE 1C 90 3 "A" C(SEE NOTE 16).099 2.51REFSEE NOTE 3(2 PLCS)5713755 / 5961339MATTE TIN ON TAIL-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,MATTE TIN ON TAIL-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,MATTE TIN ON TAIL-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,TIN/LEAD (90/10 /-5%) TAIL-G: 10µ" GOLD IN CONTACT AREA,3µ" GOLD ON TAIL-STL: 30µ" SELECTIVE GOLD IN CONACT AREA,TIN/LEAD (90/10 /-5%) ON TAIL492 MAX SWAY(EITHER DIRECTION)"B"CONTACT AREA(SEE NOTE 9 & TABLE 1)PATENT NUMBERSOPTIONS-P: PICK & PLACE PAD (4 POS MIN)(SEE FIG 11, SHT 4 & TABLE 5)-TR: TAPE & REEL PACKAGING (SEE NOTE 18)(NOT AVAILABLE WITH -EJC, -EC & -EPC. SEE NOTE 11)-FR: FULL REEL QTY. TAPE AND REEL (SEE NOTE17)-ES: END SHROUDS (SEE FIG 6, SHT 3)(MOLDED IN 5 POS MIN; -02 & -03 LEAD STYLE ONLY)(SNAP SHROUDS 9 POS MIN; -02 & -03 LEAD STYLE ONLY)-EJ: EJECTOR SHROUDS: SEE FIG 4, SHT 2)(10 POS MIN; -01 LEAD STYLE ONLY)-EJM: EJECTOR SHROUDS WITH MOLDED ALIGNMENT PIN(SEE FIG 5, SHT 2; 10 POS MIN; -01 LEAD STYLE ONLY)(NOT VALID WITH -A OPTION)-EJC: EJECTOR SHROUDS WITH LOCKING CLIP(SEE FIG 5, SHT 2 & NOTE 11)(10 POS MIN; -01 LEAD STYLE ONLY; NOT VALID WITH -A OPTION)-EC: LOCKING CLIP (SEE FIG 7, SHT 3 & NOTE 11)(9 POS MIN; -02 & -03 LEAD STYLE ONLY)-EP: GUIDE POST (SEE FIG 8, SHT 3; 9 POS MIN; -02 & -03 LEAD STYLEONLY)(USE ONLY WHEN MATING WITH CLP)-EL: BOARD LOCK (SEE FIG 9, SHT 3)(9 POS MIN; -02 & -03 LEAD STYLE ONLY)(USE ONLY WHEN MATING WITH CLP)-EPC: GUIDE POST & LOCKING CLIP(SEE FIG 10, SHT 3 & NOTE 11; USE ONLY WHEN MATING WITH CLP)(9 POS MIN; -02 & -03 LEAD STYLE ONLY; NOT VALIDWITH -A OPTION)-A: ALIGNMENT PIN (MOLDED OR STAKED; SEE FIG 3, SHT 2)(MOLDED: 3 POS MIN; STAKED: 6 POS MIN)(SAMTEC DISCRETION ON WHICH -A PIN USED)-K: KEYING OPTION FOR MATING WITH FFSD(SEE TABLE 3, SHT 2; 05 THRU 25 AVAILABLE AS STANDARD)(POSITION 13, 17, 20 & 25 AVAILABLE WITH -EXX OPTION)(LEAD STYLE -01 ONLY, SEE FIG 2, SHT 2 & NOTE 12)(ALIGNMENT PIN AVAILABLE WITH -K OPTION BUT MUST BE MOLDED)USE FTSH-50-CN-XX-X OR FTSHC-50-CN-XX-X)* -M:(MUSTMETAL PICK & PLACE PAD (5 POS MIN; USE MPP-22-5)(SEE FIG 12, SHT 4; NOT AVAILABLE WITH -K OPTION) .005SEE TABLE 6FIG 1 0.13.115 - .003 2.92 - 0.08(SEE NOTE 5)FTSH-1XX-XX-XXX-DV SHOWNUNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN INCHES.TOLERANCES ARE:DECIMALSANGLES.XX: .01 [.3]1.XXX: .005 [.13].XXXX: .0010 [.025]MATERIAL:*PROPRIETARY NOTEHAND FILL USING T-1S40*THIS DOCUMENT CONTAINS CONFIDENTIAL ANDPROPRIETARY INFORMATION AND ALL DESIGN,MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTSAND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLEOR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NORREPRODUCED, TRANSFERRED OR INCORPORATED IN ANYOTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESSWRITTEN CONSENT OF SAMTEC, INC.DO NOT SCALE DRAWINGSHEET SCALE: 5:1INSULATOR: LCP UL 94 VOTERMINAL: PHOSPHOR BRONZE* SEE NOTE 13*** SEE NOTE 14.230 5.84 REF.23 5.8(SEE NOTE 7)SEE NOTE 8520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733FAX: 812-948-5047e-Mail info@SAMTEC.comcode 55322DESCRIPTION:.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIPDWG. -1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRWBY: PURVIS10/12/1995SHEET 1 OF 5

USE SUB-FTSH-EJEHA(2 REQ'D PER ASSEMBLY, EACHUSES 1 EHA-02 & 1 FTSH-EJ)REVISION FQ(No OF POS x02 .005.0500[1.270]) - .014[ 0.13]-0.36.222 5.65REF.440 11.18REF.135 3.43REF01CL(No OF POS x .050[1.27]) .621[15.77] .010[0.25] C.085 2.16 REF.200 5.08 REF(No OF POS x .050[1.27]) .772[19.61] REF.126 3.20 REFFTSH-50-D.392 9.96REFSEE NOTE 12FIG 2FTSH-50-CN-XX-XOR FTSHC-50-CN-XX-X-EJ OPTION (SHROUDS OPEN)-K OPTION(LEAD STYLE -01 ONLY)(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)(POSITION 13, 17, 20 & 25 AVAILABLE WITH-EXX OPTION)CLFIG 4-EJ OPTION(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)(-01 LEAD STYLE ONLY)FTSH-50-D(SEE NOTE 10)CL.034 0.86(No OF POS - 2)x .050[1.27]CSM-A9H.035 0.89REF(STAKED ALIGNMENT PINS)2 MAX SWAY(EITHER DIRECTION)LC-05-TM-EJC .005.050 1.27 REFFULL R(MOLDED ALIGNMENT PINS)-A OPTION(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)(6 POSITION MINIMUM FOR STAKED ALIGNMENT PINS)(3 POSITION MINIMUM FOR MOLDED ALIGNMENT PINS) 0.130.00.085 - .000 2.16.034 T.SLDDRWCLNO CLEARANCEALLOWED HEREFTSH-50-D-XXFIG 3USE SUB-FTSH-EJEHA-A(2 REQ'D PER ASSEMBLY, EACHUSES 1 EHA-02 & 1 FTSH-EJ-A)USE SUB-FTSH-EJEHA(2 REQ'D PER ASSEMBLY, EACHUSES 1 EHA-02 & 1 FTSH-EJ)CCL(No OF POS - 2)x .050[1.27].076 1.93 REF.010 0.25 REF-EJC.05 1.3REF-EJMFIG 5-EJC & -EJM OPTIONS(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 4)(-01 LEAD STYLE ONLY)*.035 0.89REF.035 0.89REF-EJMPROPRIETARY NOTE*THIS DOCUMENT CONTAINS CONFIDENTIAL ANDPROPRIETARY INFORMATION AND ALL DESIGN,MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTSAND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLEOR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NORREPRODUCED, TRANSFERRED OR INCORPORATED IN ANYOTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESSWRITTEN CONSENT OF SAMTEC, INC.DO NOT SCALE DRAWINGSHEET SCALE: 3:1520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733FAX: 812-948-5047e-Mail info@SAMTEC.comcode 55322DESCRIPTION:.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIPDWG. EET 2 OF 5

REVISION FQ(No OF POS x .050[1.27]) .231[5.87] .008[0.20].265 6.73 REF02.075 1.91 REF.188 4.78REF.139 3.53REF01C(No OF POS x .050[1.27]) .101[2.57] .008[0.20].288 7.32REFC(No OF POS x .050[1.27]) .156[3.96] REF.032[0.81] REFCHAMFERFTSH-EP.120 3.05 REF.314 7.96FIG 8ES-FTSH.168 4.27REF-EP OPTION(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)(USE ONLY WHEN MATING WITH CLP).194 4.91(No OF POS x .050[1.27]) .257[6.53] REF(SNAP SHROUDS).293 7.44REF(No OF POS (PER FINISHED ASSEMBLY) 2) X .050 [1.27] REF02.1750 4.445REF.319 8.09(No OF POS x .050[1.27]) .223[5.66] .008[0.20].0960 2.438REFFIG 9-EL OPTION(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)(USE ONLY WHEN MATING WITH CLP)01FTSH-49-ES-XX-X(No OF POS x .050[1.27]) .231[5.87] .008[0.20]C(No OF POS x .050[1.27]) .156[3.96] REF.178 4.51REF.0990 2.515 REF(MOLDED SHROUDS)-ES OPTION(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)(USE -02 OR -03 LEAD STYLE ONLY)(9 POS MIN FOR SNAP SHROUDS)(5 POS MIN FOR MOLDED SHROUDS)(No OF POS x .050[1.27]) .131[3.32] .008[0.20]C.280 7.11REF.075 1.91 REF.288 7.32REFFIG 6FTSH-ECLC-05-TM(No OF POS x .050[1.27]) .079[3.30] .008[0.20]FIG 7-EC OPTION(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG SLDDRW.032[0.81] REFCHAMFERFTSH-EP.120 3.05 REF.314 7.96LC-05-TM.055 1.40(No OF POS x .050[1.27]) .079[2.01] .008[.20]FIG 10-EPC OPTION(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)(USE ONLY WHEN MATING WITH CLP)*.055 1.40.125 3.18REF(No OF POS x .050[1.27]) .153[3.89] REFFTSH-ELFTSH-50-D(SEE NOTE 10)PROPRIETARY NOTE*THIS DOCUMENT CONTAINS CONFIDENTIAL ANDPROPRIETARY INFORMATION AND ALL DESIGN,MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTSAND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLEOR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NORREPRODUCED, TRANSFERRED OR INCORPORATED IN ANYOTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESSWRITTEN CONSENT OF SAMTEC, INC.DO NOT SCALE DRAWINGSHEET SCALE: 2:1520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733FAX: 812-948-5047e-Mail info@SAMTEC.comcode 55322DESCRIPTION:.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIPDWG. NO.FTSH-1XX-XX-XXX-DV-XXX-XXXBY: PURVIS10/12/1995SHEET 3 OF 5

REVISION FQ"M" REF.20 5.1REF"P".060 1.52 REF.065 1.65 REF.16 4.1REF"M" REF OVERALL LENGTH"P" {("M" -.200 [5.08]) / 2} .020 [.51].230 5.84REF.13 3.3 REFPPP-25.13 3.3REF.20 5.1REFPPP-25-KT-PFIG 11.23 5.8 REF-P OPTION(DIFFERENT AS SHOWN,OTHERWISE SAME AS FIG 1)CLFTSH-50-DFTSH-50-CN-XX-K-P-TR/FR(DIFFERENT AS SHOWN,OTHERWISE SAME AS FIG 2)PPP-25-NT*MOLDED SHROUD ONLY** USE PPP-25-NT WITH -TR-P-TRPACKAGING ONLY(DIFFERENT AS SHOWN,OTHERWISE SAME AS FIG 1)NOTE: TAPE & REEL ORIENTATION:POLARIZATION NOTCH TO THE RIGHT"M" REF"P".32 8.1REF.32 8.1REFPPP-41.16 4.1REF-EJ-P & -EJX -P"M" REF OVERALL LENGTH"P" {("M" -.32 [8.1]) / 2} .020 [.51](DIFFERENT AS SHOWN,OTHERWISE SAME AS FIGS 4 & 5)"M" REFTAPE & REEL VIEW"P".250 6.35REFUSER DIRECTION OF UN-REELINGPOCKET NOT DETAILED.100 2.55 REFMPP-22-5"B"FTSH-50-D*"M" REF OVERALL LENGTH"P" {("M" - .250[6.35]) / 2} .020[0.51]FIG 12*-M: METAL PICK & PLACE PAD(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)(NOT AVAILABLE WITH -K OPTION)(5 POS MIN)* NOT ENGINEERING X-MKT.SLDDRWPROPRIETARY NOTE*THIS DOCUMENT CONTAINS CONFIDENTIAL ANDPROPRIETARY INFORMATION AND ALL DESIGN,MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTSAND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLEOR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NORREPRODUCED, TRANSFERRED OR INCORPORATED IN ANYOTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESSWRITTEN CONSENT OF SAMTEC, INC.DO NOT SCALE DRAWINGSHEET SCALE: 3:1520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733FAX: 812-948-5047e-Mail info@SAMTEC.comcode 55322DESCRIPTION:.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIPDWG. NO.FTSH-1XX-XX-XXX-DV-XXX-XXXBY: PURVIS10/12/1995SHEET 4 OF 5