TRIO 330 - PERI Aus

TRIO 330 gb ma09.08.20068:29 UhrSeite a1TRIO 3303.30The framed panel formworkfor heights of up to 3.30 mproduct range 4.302 ties up to 3.30 m

TRIO 330 gb ma09.08.20068:30 UhrSeite a2TRIO 330The framed panel formwork forfloor heights up to 3.30 m3TRIO 330 is an independent formwork system with only 6 panelsizes.*These values were calculated according tothe guidelines for issuing seals of approvalfor framed panel formwork by the seal ofapproval protection association for concrete formwork e.V. GSV.The BFD alignment couplerTRIO 330Clearly visible:Only 2 ties are required for concreting heights of up to 3.30 m.212.703 TRIO 330 can also be extended.The symmetrical tie arrangement ensures correct tiealignment, eliminating faultyerection.23.302 TRIO 330 provides for the bestsurface finishes with the highest fresh concrete pressure.*With only 2 ties in a height ofup to 3.30 m TRIO 330 complieswith DIN 18202, Table 3, Line 7under a fresh concrete pressureof 82.5 kN/m2.3.30TRIO 330 only requires one part forall connections: the BFD alignmentcoupler.(German acronym for fastening,aligning and tightening)1 TRIO 330 and TRIO 270 can beused opposite each other.2.70TRIO 330 has a symmetrical andasymmetrical tie arrangement;enabling ties to be placed horizontallyor vertically.Incorrect erection is eliminated.

TRIO 330 gb ma09.08.20068:30 UhrSeite 113.20 m high wall with4 x 3.30 m TRIO panels.Detail solutions as for TRIO 270e.g. external corners30TRM 7260TE2425TRM 7260TEWDA 5 (6)Accessories such as the BFD alignment coupler, compensation waling,scaffold brackets etc., are the sameas for TRIO 270.TRIO 330 also has all the advantagesof TRIO 270, such as: powder coating,connection of struts all round, closedsections etc.External corner with 7 BFD couplers.Standard panels with 3 BFD couplersin a 3.30 m height.3

TRIO Steel Panels, h 3,30mPanel TR/4 330x240 7,92m2Fitted with 18mm Finply formlining.Weight kgItem no.398,000543042400300600300600300ø 0ø 24575150300120300300680100100150ø 27540540132077ø 20120Detail:The tapered tie hole allowsthe tie to be angled at 6 inany direction.150Levering cornerPanel TR/4 330x120 3,96m2Panel TR/4 330x 30 0,99m2Fitted with 18mm Finply 5120ø 2433003300ø 24ø 27Detail:The tapered tie hole allowsthe tie to be angled at 6 inany direction.75112,5 112,5Levering corner4Also with levering corner asfrom the year 2002

Panel TR/4 330x90 2,97m2Panel TR/4 330x60 1,98m2Fitted with 18mm Finply formlining.Weight kgItem lso with leveringcorner as from the year 2002Panel TR/4 330x72 2,38m2Multi Panel TRM/4 330x72 2,38m2For external corners, for obliqueangles, wall junctions, stopends etc.Fitted with 18mm Finply formlining.Complete with:Plug ø 20/24 (88x).108,00122,00054334054344ø 2425493030 30720720300Also with levering corner as Levering cornerfrom the year 20022330030060030030033003300600600373003005

121,00054414120054374300300 75 0030030030030005438455050/60/1004015062,2040040 1200543910544010544355701170900570430150Filler Plate LA/4 330x36 Closes any gap from 60 to 360mm.5753001,19m26020,1021,2012,40120TRIO Wall Thickness Compensation WDAFor wall thickness compensation incorner areas.WDA-2 330/5 0,17m2WDA-2 330/6 0,20m2WDA/4 330/10 0,33m2ø 1170Articulated Corner TGE/4 330 1,98m2For oblique angles from 75 , used internallyand externally.Fitted with steel formlining.86,10300Inside Corner TE/4 330 1,98m2For 90 inside corners.Fitted with 18mm Finply fomlining.Item no.120Weight kg16505701505701504306900117050165033003300ø 24

Weight kgItem no.53,80023050140,00105525Stopend Panel TR/4 330x24 0,65m2For 240mm thick walls.Can also be used as a wall panel.100455300Shaft Panel TSE 330 0,33m2For lifting complete internal formworkto shafts. Height extendable.Complete with:Pin 20x140, galv. andCotter Pin 4/1 (7x/5x).Shuttered575240551650300mm panel297569575251200120021251080StruckLoad-bearing pointPermissible load: 2000kg600/720/900/1200mm panelTPP 330TPP 330/27Filler Support TPA 330Coniferous timber.For infilling with 21mm plywood filler.9,879,171018291018467,10054430max. 360Detail TPP33006698 (92)3221(27)5160Detail TPA96213660Filler SupportWith nailing strip.For filling gaps with21mm (27mm) plywood.3300900330048015006001200100507

Rückseite englisch07.08.200610:51 UhrSeite 1The PERI RangePanel FormworkTRIO, TRIO-L, TRIO 330Versatile panel systemTRIO-HREPLIABLEDOMINOLight weight panel systemHANDSETThe "one man" panel systemColumn FormworkRAPIDAlu column formworkTRIOColumn formworkQUATTROThe fast column formworkPERI SRSCircular column formworkGirder Wall FormworkGirder Slab FormworkVARIO GT 24Wall, column formworkMULTIFLEXGirder slab formworkRUNDFLEX and GRVCircular formworkUNIPORTAL /Table ModulesTable formFTFFacade formworkPD 81 system for 3 applicationsShoring SystemsST 100Stacking towerHD 200Heavy duty propPERI MULTIPROPThe Alu propPERI PEP PropPEP PERI EURO-PROPPlatform SystemsClimbing FormworkAlu-Slab FormworkKG and CBClimbing systemsPERI SKYDECKAlu slab formwork systemFolding Platform FB 180Universal working andprotective scaffold toDIN 4420ASG 160The light platform system forbuilding tradesACSSelf climbing formworkFurther SystemsUP T 70 / T 100Frame scaffoldingSoftware for formworkand scaffolding planningUP RosettModular scaffoldingPlywoodSite equipmentBrace framesFormwork accessoriesCustom formsUP RosettShoringPERI GmbHP.O. Box 12 6489259 WeissenhornTel.: 0 73 09 / 9 50 -0Fax: 0 73 09 / 9 51 -0info@peri.dewww.peri.deDScaffoldingpr 4.30 e 08/2006 2ma Art. Nr.: 791579 Copyright by PERI GmbHSKS and SSCSingle sided climbing formwork

Girder Wall Formwork VARIO GT 24 Wall, column formwork RUNDFLEX and GRV Circular formwork FTF Facade formwork Shoring Systems ST 100 Stacking tower HD 200 Heavy duty prop PERI MULTIPROP The Alu prop PERI PEP Prop PEP PERI EURO-PROP Climbing Formwork KG and CB Climbing systems ACS Self climbing formwork SKS and SSC Single