DOWSIL 730 FS Solvent Resistant Sealant

2y ago
16 Views
2 Downloads
343.70 KB
17 Pages
Last View : 1m ago
Last Download : 3m ago
Upload by : Asher Boatman
Transcription

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015SECTION 1. IDENTIFICATIONProduct name:DOWSIL 730 FS Solvent Resistant SealantProduct code:06023781Manufacturer or supplier's detailsCompany Identification: THE DOW CHEMICAL COMPANY2030 WILLARD H DOW CENTERMIDLAND MI 48674-0000UNITED STATESTelephone:24-Hour Emergency Contact800-258-2436:Chemtrec 1 800-424-9300Local Emergency Number:800-424-9300E-mail address:SDSQuestion@dow.comRecommended use of the chemical and restrictions on useRecommended use: Corrosion inhibitorsAdhesive, binding agentsCoatingsSECTION 2. HAZARDS IDENTIFICATIONGHS classification in accordance with 29 CFR 1910.1200Skin irritation: Category 2Eye irritation:Category 2AGHS label elementsHazard pictograms:Signal Word:WarningHazard Statements:H315 Causes skin irritation.H319 Causes serious eye irritation.Precautionary Statements:Prevention:P264 Wash skin thoroughly after handling.P280 Wear protective gloves/ eye protection/ face protection.Response:P302 P352 IF ON SKIN: Wash with plenty of soap and water.P305 P351 P338 IF IN EYES: Rinse cautiously with water1 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015for several minutes. Remove contact lenses, if present and easyto do. Continue rinsing.P332 P313 If skin irritation occurs: Get medical advice/ attention.P337 P313 If eye irritation persists: Get medical advice/ attention.P362 P364 Take off contaminated clothing and wash it beforereuse.P370 P261 In case of fire: Avoid breathing fume.Other hazardsNone known.SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTSSubstance / Mixture:MixtureChemical nature:Fluorosilicone elastomerHazardous ingredientsChemical nameHexamethyldisilazane reaction with SilicaTitanium dioxideVinyltriacetoxysilaneTrifluoropropylmethyl -92374-14-3Concentration (% w/w) 7 - 8 6 - 7 1.6 - 1.80.0305SECTION 4. FIRST AID MEASURESGeneral advice:In the case of accident or if you feel unwell, seek medicaladvice immediately.When symptoms persist or in all cases of doubt seek medicaladvice.If inhaled:If inhaled, remove to fresh air.Get medical attention if symptoms occur.In case of skin contact:In case of contact, immediately flush skin with plenty of waterfor at least 15 minutes while removing contaminated clothingand shoes.Get medical attention.Wash clothing before reuse.Thoroughly clean shoes before reuse.In case of eye contact:In case of contact, immediately flush eyes with plenty of waterfor at least 15 minutes.If easy to do, remove contact lens, if worn.Get medical attention.If swallowed:If swallowed, DO NOT induce vomiting.Get medical attention if symptoms occur.Rinse mouth thoroughly with water.2 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015Most important symptomsand effects, both acute anddelayed:Causes skin irritation.Causes serious eye irritation.Protection of first-aiders:First Aid responders should pay attention to self-protection,and use the recommended personal protective equipmentwhen the potential for exposure exists.Notes to physician:Treat symptomatically and supportively.SECTION 5. FIRE-FIGHTING MEASURESSuitable extinguishing media:Water sprayAlcohol-resistant foamCarbon dioxide (CO2)Dry chemicalUnsuitable extinguishingmedia:None known.Specific hazards during firefighting:Vapors may form explosive mixtures with air.Exposure to combustion products may be a hazard to health.Very toxic vapors are evolved.Hazardous combustion prod- :uctsCarbon oxidesSilicon oxidesFluorine compoundsFormaldehydeNitrogen oxides (NOx)Metal oxidesSpecific extinguishing methods:Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.Use water spray to cool unopened containers.Remove undamaged containers from fire area if it is safe to doso.Evacuate area.Special protective equipmentfor fire-fighters:In the event of fire, wear self-contained breathing apparatus.Use personal protective equipment.SECTION 6. ACCIDENTAL RELEASE MEASURESPersonal precautions, protec- :tive equipment and emergency proceduresUse personal protective equipment.Follow safe handling advice and personal protectiveequipment recommendations.Environmental precautionsDischarge into the environment must be avoided.Prevent further leakage or spillage if safe to do so.Retain and dispose of contaminated wash water.Local authorities should be advised if significant spillagescannot be contained.:3 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017Methods and materials forcontainment and cleaning upSDS Number:970187-00013:Date of last issue: 03/22/2017Date of first issue: 03/20/2015Soak up with inert absorbent material.For large spills, provide diking or other appropriatecontainment to keep material from spreading. If diked materialcan be pumped, store recovered material in appropriatecontainer.Clean up remaining materials from spill with suitableabsorbent.Local or national regulations may apply to releases anddisposal of this material, as well as those materials and itemsemployed in the cleanup of releases. You will need todetermine which regulations are applicable.Sections 13 and 15 of this SDS provide information regardingcertain local or national requirements.SECTION 7. HANDLING AND STORAGETechnical measures:See Engineering measures under EXPOSURECONTROLS/PERSONAL PROTECTION section.Local/Total ventilation:Use only with adequate ventilation.Advice on safe handling:Do not get on skin or clothing.Do not swallow.Do not get in eyes.Handle in accordance with good industrial hygiene and safetypractice, based on the results of the workplace exposureassessmentKeep away from water.Protect from moisture.Take care to prevent spills, waste and minimize release to theenvironment.Conditions for safe storage:Keep in properly labeled containers.Store in accordance with the particular national regulations.Materials to avoid:Do not store with the following product types:Strong oxidizing agentsSECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTIONIngredients with workplace control parametersIngredientsCAS-No.Hexamethyldisilazane reactionwith Silica68909-20-6Value type(Form ofexposure)TWA (Dust)TWA (Dust)Titanium dioxide13463-67-74 / 17TWA (totalControl parameters / Permissibleconcentration20 Millionparticles per cubicfoot(Silica)80 mg/m3/ %SiO2(Silica)15 mg/m³BasisOSHA Z-3OSHA Z-3OSHA Z-1

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015dust)TWATrifluoropropylmethyl cyclotrisiloxane2374-14-3TWA10 mg/m³(Titanium dioxide)5 ppbACGIHDCC OELFurther information: SkinHazardous components without workplace control 130-08-9These substance(s) are inextricably bound in the product and therefore do not contributeto a dust inhalation hazard.Hexamethyldisilazane reaction with SilicaTitanium dioxideOccupational exposure limits of decomposition productsIngredientsCAS-No.Acetic acid64-19-7Value type(Form ofexposure)TWAControl parameters / Permissibleconcentration10 ppmBasisSTELST15 ppm15 ppm37 mg/m³10 ppm25 mg/m³10 ppm25 mg/m³ACGIHNIOSH RELTWATWAEngineering measures:ACGIHNIOSH RELOSHA Z-1Processing may form hazardous compounds (see section10).Ensure adequate ventilation, especially in confined areas.Minimize workplace exposure concentrations.Personal protective equipmentRespiratory protection: General and local exhaust ventilation is recommended tomaintain vapor exposures below recommended limits. Whereconcentrations are above recommended limits or areunknown, appropriate respiratory protection should be worn.Follow OSHA respirator regulations (29 CFR 1910.134) anduse NIOSH/MSHA approved respirators. Protection providedby air purifying respirators against exposure to anyhazardous chemical is limited. Use a positive pressure airsupplied respirator if there is any potential for uncontrolledrelease, exposure levels are unknown, or any othercircumstance where air purifying respirators may not provideadequate protection.Hand protectionMaterial:Chemical-resistant gloves5 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015Remarks:Choose gloves to protect hands against chemicals dependingon the concentration specific to place of work. Breakthroughtime is not determined for the product. Change gloves often!For special applications, we recommend clarifying theresistance to chemicals of the aforementioned protectivegloves with the glove manufacturer. Wash hands beforebreaks and at the end of workday.Eye protection:Wear the following personal protective equipment:Safety gogglesSkin and body protection:Select appropriate protective clothing based on chemicalresistance data and an assessment of the local exposurepotential.Skin contact must be avoided by using impervious protectiveclothing (gloves, aprons, boots, etc).Hygiene measures:Ensure that eye flushing systems and safety showers arelocated close to the working place.When using do not eat, drink or smoke.Wash contaminated clothing before re-use.These precautions are for room temperature handling. Use atelevated temperature or aerosol/spray applications mayrequire added precautions.SECTION 9. PHYSICAL AND CHEMICAL PROPERTIESAppearance:pasteColor:whiteOdor:Acetic acidOdor Threshold:No data availablepH:Not applicableMelting point/freezing point:No data availableInitial boiling point and boilingrange:Not applicableFlash point:95 CMethod: Seta closed cupEvaporation rate:Not applicableFlammability (solid, gas):Not classified as a flammability hazardSelf-ignition: The substance or mixture is not classified as pyrophoric. Thesubstance or mixture is not classified as self heating.6 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015Upper explosion limit / Upperflammability limit:No data availableLower explosion limit / Lowerflammability limit:No data availableVapor pressure:Not applicableRelative vapor density:No data availableRelative density:1.41Solubility(ies)Water solubility:No data availablePartition coefficient: noctanol/water:No data availableAutoignition temperature:No data availableDecomposition temperature:No data availableViscosityViscosity, dynamic:Not applicableExplosive properties:Not explosiveOxidizing properties:The substance or mixture is not classified as oxidizing.Molecular weight:No data availableParticle size:No data availableSECTION 10. STABILITY AND REACTIVITYReactivity:Not classified as a reactivity hazard.Chemical stability:Stable under normal conditions.Possibility of hazardous reactions:Vapors may form explosive mixture with air.Use at elevated temperatures may form highly hazardouscompounds.Can react with strong oxidizing agents.Adequate ventilation is required.See OSHA formaldehyde standard, 29 CFR 1910.1048When heated to temperatures above 180 C (356 F) in thepresence of air, trace quantities of formaldehyde may bereleased.Hazardous decomposition products will be formed uponcontact with water or humid air.Hazardous decomposition products will be formed at elevatedtemperatures.Conditions to avoid:Exposure to moisture.7 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Incompatible materials:Date of last issue: 03/22/2017Date of first issue: 03/20/2015Oxidizing agentsWaterHazardous decomposition productsContact with water or humid: Acetic acidairThermal Hydrogen fluorideSECTION 11. TOXICOLOGICAL INFORMATIONInformation on likely routes of exposureSkin contactIngestionEye contactAcute toxicityNot classified based on available information.Ingredients:Hexamethyldisilazane reaction with Silica:Acute oral toxicity: LD50 (Rat): 5,000 mg/kgAssessment: The substance or mixture has no acute oral toxicityRemarks: Based on data from similar materialsTitanium dioxide:Acute oral toxicity:LD50 (Rat): 5,000 mg/kgAcute inhalation toxicity:LC50 (Rat): 6.82 mg/lExposure time: 4 hTest atmosphere: dust/mistAssessment: The substance or mixture has no acute inhalation toxicityVinyltriacetoxysilane:Acute inhalation toxicity:LC50 (Rat): 2300 ppmExposure time: 7 hTest atmosphere: vaporAssessment: The substance or mixture has no acute inhalation toxicityRemarks: On basis of test data.Trifluoropropylmethyl cyclotrisiloxane:Acute oral toxicity: LD50 (Rat): 4,650 mg/kgRemarks: On basis of test data.8 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017Acute inhalation toxicitySDS Number:970187-00013:Date of last issue: 03/22/2017Date of first issue: 03/20/2015LC50 (Rat): 13.44 mg/lExposure time: 4 hTest atmosphere: vaporAssessment: The substance or mixture has no acute inhalation toxicityRemarks: On basis of test data.Skin corrosion/irritationCauses skin irritation.Ingredients:Hexamethyldisilazane reaction with Silica:Assessment: Repeated exposure may cause skin dryness or cracking.Titanium dioxide:Species: RabbitResult: No skin irritationVinyltriacetoxysilane:Result: Corrosive after 3 minutes to 1 hour of exposureRemarks: Based on data from similar materialsTrifluoropropylmethyl cyclotrisiloxane:Species: RabbitResult: No skin irritationRemarks: On basis of test data.Serious eye damage/eye irritationCauses serious eye irritation.Ingredients:Hexamethyldisilazane reaction with Silica:Species: RabbitResult: No eye irritationRemarks: Based on data from similar materialsTitanium dioxide:Species: RabbitResult: No eye irritationVinyltriacetoxysilane:Result: Irreversible effects on the eyeRemarks: Based on data from similar materialsTrifluoropropylmethyl cyclotrisiloxane:Species: RabbitResult: No eye irritationRemarks: On basis of test data.9 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015Respiratory or skin sensitizationSkin sensitizationNot classified based on available information.Respiratory sensitizationNot classified based on available information.Ingredients:Titanium dioxide:Test Type: Local lymph node assay (LLNA)Routes of exposure: Skin contactSpecies: MouseResult: negativeTrifluoropropylmethyl cyclotrisiloxane:Assessment: Does not cause skin sensitization.Test Type: Buehler TestSpecies: Guinea pigResult: negativeRemarks: On basis of test data.Germ cell mutagenicityNot classified based on available information.Ingredients:Hexamethyldisilazane reaction with Silica:Genotoxicity in vitro: Test Type: Bacterial reverse mutation assay (AMES)Result: negativeRemarks: Based on data from similar materialsTitanium dioxide:Genotoxicity in vitro:Test Type: Bacterial reverse mutation assay (AMES)Result: negativeGenotoxicity in vivo:Test Type: In vivo micronucleus testSpecies: MouseResult: negativeVinyltriacetoxysilane:Genotoxicity in vitro:Test Type: Bacterial reverse mutation assay (AMES)Result: negativeRemarks: On basis of test data.Trifluoropropylmethyl cyclotrisiloxane:Genotoxicity in vitro: Test Type: Mutagenicity (in vitro mammalian cytogenetic test)Result: negativeRemarks: On basis of test data.10 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015Test Type: Bacterial reverse mutation assay (AMES)Result: negativeRemarks: On basis of test data.Genotoxicity in vivo:Test Type: Mammalian erythrocyte micronucleus test (in vivocytogenetic assay)Species: MouseResult: negativeRemarks: On basis of test data.Germ cell mutagenicity Assessment:Animal testing did not show any mutagenic effects.CarcinogenicityNot classified based on available information.Ingredients:Titanium dioxide:Species: RatApplication Route: inhalation (dust/mist/fume)Exposure time: 24 MonthsMethod: OECD Test Guideline 453Result: positiveRemarks: The mechanism or mode of action may not be relevant in humans.These substance(s) are inextricably bound in the product and therefore do not contribute to adust inhalation hazard.Carcinogenicity - Assessment:Limited evidence of carcinogenicity in inhalation studies withanimals.IARCGroup 2B: Possibly carcinogenic to humansTitanium dioxide13463-67-7OSHANo component of this product present at levels greater than orequal to 0.1% is on OSHA’s list of regulated carcinogens.NTPNo ingredient of this product present at levels greater than orequal to 0.1% is identified as a known or anticipated carcinogenby NTP.Reproductive toxicityNot classified based on available information.Ingredients:Trifluoropropylmethyl cyclotrisiloxane:Effects on fertility: Application Route: Skin contactSymptoms: Effects on fertility.Remarks: On basis of test data.Application Route: Ingestion11 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015Symptoms: Effects on fertility.Remarks: On basis of test data.Reproductive toxicity - Assessment:Some evidence of adverse effects on sexual function andfertility, based on animal experiments.STOT-single exposureNot classified based on available information.STOT-repeated exposureNot classified based on available information.Ingredients:Trifluoropropylmethyl cyclotrisiloxane:Routes of exposure: IngestionTarget Organs: Heart, Musculo-skeletal systemAssessment: Shown to produce significant health effects in animals at concentrations of 10mg/kg bw or less.Routes of exposure: Skin contactTarget Organs: LiverAssessment: Shown to produce significant health effects in animals at concentrations of 20 to200 mg/kg bw.Repeated dose toxicityIngredients:Titanium dioxide:Species: RatNOAEL: 24,000 mg/kgApplication Route: IngestionExposure time: 28 DaysSpecies: RatNOAEL: 10 mg/m³Application Route: inhalation (dust/mist/fume)Exposure time: 2 yRemarks: These substance(s) are inextricably bound in the product and therefore do notcontribute to a dust inhalation hazard.Trifluoropropylmethyl cyclotrisiloxane:Species: RatApplication Route: IngestionTarget Organs: Heart, Musculo-skeletal systemRemarks: On basis of test data.Species: RatApplication Route: Skin contactTarget Organs: LiverRemarks: On basis of test data.12 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015Aspiration toxicityNot classified based on available information.SECTION 12. ECOLOGICAL INFORMATIONEcotoxicityIngredients:Titanium dioxide:Toxicity to fish:LC50 (Oncorhynchus mykiss (rainbow trout)): 100 mg/lExposure time: 96 hMethod: OECD Test Guideline 203Toxicity to daphnia and otheraquatic invertebrates:EC50 (Daphnia magna (Water flea)): 100 mg/lExposure time: 48 hToxicity to algae:EC50 (Skeletonema costatum (marine diatom)): 10,000 mg/lExposure time: 72 hToxicity to microorganisms:EC50: 1,000 mg/lExposure time: 3 hMethod: OECD Test Guideline 209Vinyltriacetoxysilane:Toxicity to daphnia and otheraquatic invertebrates:EC50 (Daphnia magna (Water flea)): 100 mg/lExposure time: 48 hRemarks: On basis of test data.Toxicity to algae:EC50 (Selenastrum capricornutum (green algae)): 100 mg/lExposure time: 72 hMethod: EPA-679/4-73-001Remarks: On basis of test data.Ecotoxicology AssessmentAcute aquatic toxicity:This product has no known ecotoxicological effects.Persistence and degradabilityIngredients:Trifluoropropylmethyl cyclotrisiloxane:Biodegradability: Result: Not readily biodegradable.Biodegradation: 0 %Exposure time: 28 dMethod: CO2 Evolution TestBioaccumulative potentialNo data availableMobility in soilNo data available13 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015Other adverse effectsNo data availableSECTION 13. DISPOSAL CONSIDERATIONSDisposal methodsResource Conservation andRecovery Act (RCRA):This product has been evaluated for RCRA characteristicsand does not meet the criteria of hazardous waste if discardedin its purchased form.Waste from residues:Dispose of in accordance with local regulations.Contaminated packaging:Empty containers should be taken to an approved wastehandling site for recycling or disposal.If not otherwise specified: Dispose of as unused product.SECTION 14. TRANSPORT INFORMATIONInternational RegulationsUNRTDGNot regulated as a dangerous goodIATA-DGRNot regulated as a dangerous goodIMDG-CodeNot regulated as a dangerous goodTransport in bulk according to Annex II of MARPOL 73/78 and the IBC CodeNot applicable for product as supplied.Domestic regulation49 CFRNot regulated as a dangerous goodSECTION 15. REGULATORY INFORMATIONEPCRA - Emergency Planning and Community Right-to-KnowCERCLA Reportable QuantityIngredientsCAS-No.Component RQ(lbs)Acetic acid64-19-75000Acetic anhydride108-24-75000*: Calculated RQ exceeds reasonably attainable upper limit.Calculated product RQ(lbs)**SARA 304 Extremely Hazardous Substances Reportable QuantityThis material does not contain any components with a section 304 EHS RQ.SARA 302 Extremely Hazardous Substances Threshold Planning QuantityThis material does not contain any components with a section 302 EHS TPQ.SARA 311/312 Hazards:Skin corrosion or irritation14 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015Serious eye damage or eye irritationSARA 313:This material does not contain any chemical components withknown CAS numbers that exceed the threshold (De Minimis)reporting levels established by SARA Title III, Section 313.US State RegulationsPennsylvania Right To KnowTrifluoropropylmethyl siloxane, hydroxy-terminatedHexamethyldisilazane reaction with SilicaTitanium dioxideAcetic acidAcetic 24-7California Prop. 65This product does not contain any chemicals known to the State of California to cause cancer,birth, or any other reproductive defects.California Permissible Exposure Limits for Chemical ContaminantsTitanium dioxide13463-67-7The ingredients of this product are reported in the following inventories:TSCA: All chemical substances in this product are either listed on theTSCA Inventory or are in compliance with a TSCA Inventoryexemption.AICS:All ingredients listed or exempt.IECSC:All ingredients listed or exempt.ENCS/ISHL:All components are listed on ENCS/ISHL or exempted frominventory listing.DSL:All chemical substances in this product comply with the CEPA1999 and NSNR and are on or exempt from listing on theCanadian Domestic Substances List (DSL).REACH:For purchases from Dow Chemical EU legal entities, allingredients are currently pre/registered or exempt underREACH. Please refer to section 1 for recommended uses. Forpurchases from non-EU Dow Chemical legal entities with theintention to export into EEA please contact your DCrepresentative/local office.KECI:One or more ingredients are not listed or exempt.TCSI:All ingredients listed or exempt.15 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015SECTION 16. OTHER INFORMATIONFurther informationNFPA:HMIS ILITY1PHYSICAL HAZARD0HMIS ratings are based on a 0-4 ratingscale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. The "*" representsa chronic hazard, while the "/" representsthe absence of a chronic hazard.Special hazard.Full text of other abbreviationsACGIH:DCC OEL:NIOSH REL:OSHA Z-1:OSHA Z-3:ACGIH / TWAACGIH / STELDCC OEL / TWANIOSH REL / TWA::::NIOSH REL / ST:OSHA Z-1 / TWAOSHA Z-3 / TWA::USA. ACGIH Threshold Limit Values (TLV)Dow Chemical GuideUSA. NIOSH Recommended Exposure LimitsUSA. Occupational Exposure Limits (OSHA) - Table Z-1 Limits for Air ContaminantsUSA. Occupational Exposure Limits (OSHA) - Table Z-3 Mineral Dusts8-hour, time-weighted averageShort-term exposure limitTime weighted averageTime-weighted average concentration for up to a 10-hourworkday during a 40-hour workweekSTEL - 15-minute TWA exposure that should not be exceededat any time during a workday8-hour time weighted average8-hour time weighted averageAICS - Australian Inventory of Chemical Substances; ASTM - American Society for the Testing ofMaterials; bw - Body weight; CERCLA - Comprehensive Environmental Response, Compensation,and Liability Act; CMR - Carcinogen, Mutagen or Reproductive Toxicant; DIN - Standard of theGerman Institute for Standardisation; DOT - Department of Transportation; DSL - Domestic Substances List (Canada); ECx - Concentration associated with x% response; EHS - Extremely Hazardous Substance; ELx - Loading rate associated with x% response; EmS - Emergency Schedule; ENCS - Existing and New Chemical Substances (Japan); ErCx - Concentration associatedwith x% growth rate response; ERG - Emergency Response Guide; GHS - Globally HarmonizedSystem; GLP - Good Laboratory Practice; HMIS - Hazardous Materials Identification System;IARC - International Agency for Research on Cancer; IATA - International Air Transport Association; IBC - International Code for the Construction and Equipment of Ships carrying DangerousChemicals in Bulk; IC50 - Half maximal inhibitory concentration; ICAO - International Civil Aviation Organization; IECSC - Inventory of Existing Chemical Substances in China; IMDG - International Maritime Dangerous Goods; IMO - International Maritime Organization; ISHL - IndustrialSafety and Health Law (Japan); ISO - International Organisation for Standardization; KECI - Ko16 / 17

SAFETY DATA SHEETDOWSIL 730 FS Solvent Resistant SealantVersion8.0Revision Date:10/20/2017SDS Number:970187-00013Date of last issue: 03/22/2017Date of first issue: 03/20/2015rea Existing Chemicals Inventory; LC50 - Lethal Concentration to 50 % of a test population; LD50- Lethal Dose to 50% of a test population (Median Lethal Dose); MARPOL - International Convention for the Prevention of Pollution from Ships; MSHA - Mine Safety and Health Administration;n.o.s. - Not Otherwise Specified; NFPA - National Fire Protection Association; NO(A)EC - No Observed (Adverse) Effect Concentration; NO(A)EL - No Observed (Adverse) Effect Level; NOELR No Observable Effect Loading Rate; NTP - National Toxicology Program; NZIoC - New ZealandInventory of Chemicals; OECD - Organization for Economic Co-operation and Development;OPPTS - Office of Chemical Safety and Pollution Prevention; PBT - Persistent, Bioaccumulativeand Toxic substance; PICCS - Philippines Inventory of Chemicals and Chemical Substances;(Q)SAR - (Quantitative) Structure Activity Relationship; RCRA - Resource Conservation and Recovery Act; REACH - Regulation (EC) No 1907/2006 of the European Parliament and of theCouncil concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals; RQ Reportable Quantity; SADT - Self-Accelerating Decomposition Temperature; SARA - SuperfundAmendments and Reauthorization Act; SDS - Safety Data Sheet; TCSI - Taiwan Chemical Substance Inventory; TSCA - Toxic Substances Control Act (United States); UN - United Nations;UNRTDG - United Nations Recommendations on the Transport of Dangerous Goods; vPvB Very Persistent and Very BioaccumulativeSources of key data used tocompile the Material SafetyData Sheet:Internal technical data, data from raw material SDSs, OECDeChem Portal search results and European Chemicals Agency, http://echa.europa.eu/Revision Date:10/20/2017Items where changes have been made to the previous version are highlighted in the body of thisdocument by two vertical lines.The information provided in this Safety Data Sheet is correct to the best of our knowledge,information and belief at the date of its publication. The information is designed only as aguidance for safe handling, use, processing, storage, transportation, disposal and release andshall not be considered a warranty or quality specification of any type. The information providedrelates only to the specific material identified at the top of this SDS and may not be valid when theSDS material is used in combination with any other materials or in any process, unless specifiedin the text. Material users should review the information and recommendations in the specificcontext of their intended manner of handling, use, processing and storage, including anassessment of the appropriateness of the SDS material in the user’s end product, if applicable.US / Z817 / 17

: Vapors may form explosive mixture with air. Use at elevated temperatures may form highly hazardous compounds. Can react with strong oxidizing agents. Adequate ventilation is required. See OSHA formaldehyde standard, 29 CFR 1910.1048 When heated to temperatures above 180 C (356 F) in the presence of air, trace quantities of formaldehyde may be

Related Documents:

DOWSIL TC-4025 Dispensable Thermal Pad DOWSIL TC-3015 Reworkable Thermal Gel DOWSIL 3-6651 Thermally Conductive Elastomer DOWSIL TC-4605 HLV Thermally Conductive Encapsulant DOWSIL TC-6011 Thermally Conductive Encapsulant SYLGARD 3-6605 Thermal Conductive Elastomer DOWSIL TC-4535 CV Thermally Conductive Gap Filler

DOWSIL 123 Silicone Seal is a preformed, ultra-low modulus silicone extrusion that is bonded to substrates using DOWSIL 791 Silicone Weatherproofing Sealant or DOWSIL 795 Silicone Building Sealant.1 Easy-to-install DOWSIL 123 Silicone Seal can be used in both new and remedial construction applications.

Description DOWSIL 123 Silicone Seal is a preformed, ultra-low modulus silicone extrusion that is bonded to substrates using DOWSIL 791 Silicone Weatherproofing Sealant or DOWSIL 795 Silicone Building Sealant. 1 Easy-to-install DOWSIL 123 Silicone Seal can be used in

DOWSIL 123 Silicone Seal is a preformed, ultra-low modulus silicone extrusion that is bonded to substrates using DOWSIL 791 Silicone Weatherproofing Sealant or DOWSIL 795 Silicone Building Sealant.1 Easy-to-install DOWSIL 123 Silicone Seal can be used in both new and remedial construction applications.

DOWSIL 123 Silicone Seal must be bonded to clean, dry, frost-free, dust-free substrates using DOWSIL 791 Silicone Weatherproofing Sealant or DOWSIL 795 Silicone Building . Dow's sole warranty is that our productswill meet the sales specifications in effect at the time of shipment.

VL R 20 MDI Polyisocyanate Solvent-free 31.5 132 VL R 21 MDI Polyisocyanate Solvent-free 31.5 132 VH 20 MDI Modified MDI Solvent-free 24.5 173 E 21 MDI Prepolymer Solvent-free 16 263 E 22 MDI Prepolymer Solvent-free 8.6 489 E 23 MDI Prepolymer Solvent-free 15.4 273 E 29 MDI Prepolymer Solvent-free 24 175 E 20100 MDI Prepolymer Solvent-free 15.9 268

Player Rankings Date:Mar 8, 2021 Rank Money ATP Prize Money Leaders (US ) YTD Singles Doubles Career 133 Halys, Quentin 72,862 72,862 0 1,141,879 134T Stebe, Cedrik-Marcel 72,730 72,730 0 1,364,969 134T Sugita, Yuichi 72,730 72,730 0 2,780,908 134T Torpegaard, Mikael 72,730 72,730 0 246,789 137 Cerundolo, Francisco 72,700 70,045 2,655 174,463 138T Murray, Jamie 72,330 0 .

Conformal Coating: Silicone, Acrylic, Urethane Thin layer provides little impact on light quality . 4000K Test Part, No Material (Optical Simulation) Lens design courtesy of: 4000K Test Part with DOWSIL EI-1184 Optical Encapsulant 4000K Test Part with DOWSIL 1-2577 Low VOC Conformal Coating 4000K Test Part with DOWSIL MS-1002