Teamcenter Success Stories Putting The Power Of PDM And .
Teamcenter Success StoriesPutting the Power of PDM and PLM to WorkTeamcenter from Siemens Digital Industries SoftwareTeamcenter is the world’s most widely used Product Lifecycle Management (PLM)system – one that organizes, standardizes, streamlines, and modifies your plansand data across your entire organization. The unmatched breadth and depth ofthe Teamcenter portfolio means that you can solve more of the tough challengesrequired to develop highly successful products. From the intuitive Teamcenter userinterface, people across the organization can take part in the product developmentprocess more easily than ever before.Get started with Teamcenter by taking controlof product data and processes, including 3Ddesigns, electronics, embedded software,documentation, and your bill of materials(BOM). Reach greater returns on your PLMsystem by leveraging your product informationacross more functions and departments,including manufacturing, quality, costengineering, compliance, service, and yoursupply chain. Teamcenter has the flexibility toadapt to business changes and manage all ofthe challenges of product development.Teamcenter Rapid StartRapid Start is a competitively-priced solutionfor Teamcenter that applies preconfiguredbest practices to everyday engineeringtasks and processes for small-to-mid-sizedmanufacturing companies, departmentalworkgroups, suppliers to OEMs, and otherproduct manufacturers. It delivers all of therobust Product Data Management (PDM)capabilities of Teamcenter, plus the flexibilityto grow into additional PLM capabilities asneeded. With Rapid Start, Teamcenter can bedeployed and ready to use in nearly 70% lesstime that it takes for a custom installation ofthe separate software components.Rapid Start is the fastest way to get up andrunning with PDM, then grow to PLM: Deployment option for Teamcenter, themost widely used PLM solution in the world Documented and proven two- to three-weekdeployment versus competitive solutions More affordable option than traditionalservices consulting, especially for SMBs Simple upgrade path from version of version Customers can add on Active Workspace Can expand to standard Teamcenter whilekeeping Rapid Start’s unique featuresWe’re available by phone (844-GEO-SUPT) or email (techsupport@geoplm.com)geoplm.com
CAD-Neutral Visualization & CollaborationTeamcenter is a true CAD-neutral platform that manages the associativity betweennative CAD files and the CAD-neutral JT format. This allows the creation of multi-CADparts and assemblies, and extends design data across the organization and externallyto see product as it changes. Files can be imported into another CAD authoring tool,and notations, mockup and analysis can be done inside of the system. In addition, mostof the CAD information can be used for clearance analysis and assembly-checking.Teamcenter enables design teams to create, manage and reuse native design data from multipleCAD systems, including NX software and Solid Edge software from Siemens, as well asAutocad, Catia, Creo, Inventor and Solidworks, all in a single secure environment. Managing CADas just another file type is not the same as interrogating native CAD files. To find out if a PDMsystem is truly CAD-neutral like Teamcenter, ask these 10 questions: What is the list of CAD systems supported? Are NX and Solid Edge supported? Can the CAD designs interact in thePDM system? Can PDM users save files as both a CADneutral file format (i.e. .jt) AND a CADsystem file type (i.e. .prt, .asm)? Can designers open EITHER a CAD-neutralfile or a native file type to see files designedin other CAD systems? Can they create assemblies from CAD filescreated by different systems? Can they manage design BOMs across CADsystems, maintaining associativity from thedesign file to the CAD system of origin? Can they exchange CAD-neutral files withsuppliers and customers? Can non-CAD users make notations,mockup and analysis of designs? Is there integrated visualization ordigital mockup?Teamcenter features: Adaptable PLM Foundation Product Configuration Bill of Materials Management Product Cost Management Change Management & Workflow Product Requirements Engineering Document Management & Publishing Program Planning & Project Execution Electrical Design Management Search & Analytics Environmental Compliance &Product Sustainability Simulation Management Manufacturing Process &Data Management Materials Data & Lifecycle Management Mechanical Design Management Model Based Systems Engineering (MBSE) Software Design & Asset Management Sourcing & Supplier Integration Streamlined Service Operations Visualization, Digital Mockup &Virtual RealityWe’re available by phone (844-GEO-SUPT) or email (techsupport@geoplm.com)geoplm.com
Teamcenter Success StoriesDes-Case and TeamcenterDes-Case Corporation was founded in 1983 to provide the lubricant industry with innovativesolutions to extend oil and equipment life. The original breather was the brainchild of companyfounder Jim Waller, who responded to the request of an engineer at a major oil companylooking for a way to improve the performance and longevity of his products. As a filtrationengineer by trade, Jim’s entrepreneurial spirit took hold with this opportunity and the breatherwas created and put into production.For more than 30 years, the company has enjoyedan excellent reputation for its products and servicequality, dependability and business integrity. DesCase holds patents in the airflow design of breatherswith technology that has yet to be surpassed in themarketplace. Customers include manufacturers inmany different industries, including General Mills,GE Appliances, Eli Lilly and Company, Nissan MotorCompany, Xcel Energy, and U.S. Steel.According to Keith Mawdsley, Director of Engineeringfor Des-Case, Teamcenter’s ability to manage thecompany’s bill of materials (BOM) and integratewith the ERP system for ordering materials werekey to its success. The company maintains thousands of product configurations and needed arobust PDM system to replace the Excel-based solution used previously. First implemented in2013, Teamcenter integrates with the company’s SOLIDWORKS 3D CAD design software via theIntegration Module, as well as with Oracle’s JD Edwards ERP software to order materials.A precise and accurate engineering bill of materials (EBOM) is essential for new products, sincethis is the document that ensures that the correct materials and parts are available in thecorrect quantities when the product is being manufactured. “Teamcenter has the Super EBOMwhich quickly created accurate bills of materials,” according to Aaron Payne, Teamcenter BOMAdministrator for Des-Case. “It is also good for drawing PDFs for the supply chain,” he added.We’re available by phone (844-GEO-SUPT) or email (techsupport@geoplm.com)geoplm.com
Fisher Dynamics and TeamcenterFisher Dynamics is the automotive industry’s premier supplier of safety-critical seat structuresand mechanisms. The company is descended from the original Fisher Body Company foundedin 1908 by the Fisher brothers, who developed interchangeable wooden body parts that didnot have to hand-fitted. This success in mass production resulted in the capacity to produce370,000 bodies per year by 1916, with customers including Ford, Krit, Chalmers, Cadillac,Oldsmobile, and Studebaker.Today, the company manufactures a full lineof power and manual seating systems. Seatstructures include front seats, fold-flat rearseats, multi-function rear seats (includingsplit rear seats) and advanced lightweightseating. Seating mechanisms includerecliners, track systems, latches, and powerheight adjusters.The company has one of the more complexPDM and Change Management installations,with CAD integrations for NX CAD, Catia,Creo, and SOLIDWORKS. But it was the needsof the automakers that they work with –General Motors, Ford Motor Company, andFiat Chrysler Automobiles – that led them toswitch from PTC’s Windchill to Teamcenter in2014. Those OEMs all use Teamcenter, leadingFisher Dynamics to make the decision toinstall four separate instances of the softwarefor the three companies and for their owninternal use.“Overall, from the perspective of managingusers and managing everything on theadministrative side, it is a whole lot easierthan Windchill,” says Brian Smith, ApplicationsDeveloper for the company. But it is thesupport from Geometric Solutions thatmakes the software a success for FisherDynamics. “We have had a great relationship.If I can’t answer a question, I go to GeometricSolutions. If they can’t answer it, they have adirect line to Siemens.”The local presence and onsite availabilitywere reasons that Fisher Dynamics choseto work with Geometric Solutions as theirVAR, and have continued to work withthem since switching to the Teamcentersolution. In one instance where the softwarerequired upgrading, he says “I had a guy fromGeometric here for 30 hours straight to do thelive update over the weekend.”We’re available by phone (844-GEO-SUPT) or email (techsupport@geoplm.com)geoplm.com
Cupertino Electric and TeamcenterCupertino Electric, Inc.is an electrical engineering and construction company that uncoverschallenges and delivers cutting-edge solutions for commercial, renewable, utility, modularand data center customers experiencing intense change. The company is the largest utilitycontractor in California, with more than 3,000 employees and decades of experience buildinglarge-scale solar projects and cutting-edge data centers for Internet companies.For Nathan Larson, Engineering Manager forCupertino Electric, selecting Siemens softwareand Geometric Solutions was an easy choice,because he had worked with them previouslyat another company in the material handlingindustry. “I didn’t look at anyone else otherthan Geometric Solutions,” he says.While the company did not have a PDMsolution, they mostly were using Autodeskproducts previously for CAD. “Othercompanies in our industry have some ofthe same geometry challenges and samedocument control challenges, and they swearby the Siemens products. It seemed like alow-risk solution.” As a result, the companydecided to migrate to NX CAD and Teamcenterat the same time.For Cupertino, the primary PDM challengesare engineering document control andprocess control, and the company had noother formal systems that can handle thosefunctions. “We needed an easily deployablePDM system. Rapid Start helped us get up andrunning quickly. Probably about a month to befully implemented.”Other services from Geometric Solutionshave helped them continue to get the mostout of their Siemens software investment.They have relied on Geometric for Siemenstraining, as well as using their support servicesfor configuration and setup. “I have beenusing them daily for the past month to getTeamcenter upgraded from one version toanother,” he says, because of a new productabout to be launched that was built usingthe system. “Geometric Solutions is easy towork with. I have been working with the sameperson there since I started working withthem seven years ago.”We’re available by phone (844-GEO-SUPT) or email (techsupport@geoplm.com)geoplm.com
Why Choose Geometric Solutions?An Experienced PartnerGeometric Solutions has a unique advantage over other VARs that sell Siemens Digital IndustriesSoftware. We don’t just sell it – we use it every day. Geometric Solutions is part of the Waltonenfamily of companies, which includes Waltonen Engineering, a Tier 1 supplier to General Motorssince 1957, and Independence Tooling Solutions. This real-world experience allows us to give ourclients an unparalleled perspective on which modules to buy, and how to configure the softwarefor maximum efficiency and effectiveness.Geometric Solutions has been in existence since 2002, becoming the first Tecnomatix VARpartner of Siemens. In fact, the Waltonen family of companies is the largest non-OEM userof Tecnomatix in the country, with more than 25 seats that we own and use on a daily basis.We also have 164 seats on NX, 12 seats on Process Simulate, 9 seats on Line Designer, 3implementations of Teamcenter, and deep experience using other Siemens software solutionsincluding VSA, DPV, Plant Simulation, and Mechatronics Concept Designer (MCD).The Entire Siemens Software SuiteWhile we sell and support the entire suite of Siemens Digital Industries Software, we haveparticularly deep expertise in the following solutions:Tecnomatix – Tecnomatix digital manufacturing solutionshelp to ensure that you can build your products as well asyou design them. Whether you are designing a new plantfrom the ground up or introducing a new product into anexisting facility, Tecnomatix solutions can help streamlineimplementation, reduce startup costs, and get you from art topart as quickly as possible.Teamcenter – Teamcenter is the world’s most widely used Product Lifecycle Management(PLM) system, helping companies to manage product data and streamline operationsacross the enterprise. With Rapid Start, we can quickly deliver all of the robust Product DataManagement (PDM) capabilities of Teamcenter, plus provide you with the flexibility to growinto additional PLM capabilities as needed.NX – NX is the integrated product design, engineering and manufacturing solution that helpsyou speed product development, improve quality, and reduce costs. It is a powerful suite ofintegrated tools including NX CAD, NX CAM, NX CMM, and NX Line Designer.Solid Edge – Solid Edge is a portfolio of affordable, easy-to-use software tools that address allaspects of the product development process. Solid Edge combines the speed and simplicityof direct modeling with the flexibility and control of parametric design – made possible bysynchronous technology.We’re available by phone (844-GEO-SUPT) or email (techsupport@geoplm.com)geoplm.com
Flexible ServicesGeometric Solutions provides a full range ofconsulting and implementation services toour clients to get the most out of the SiemensDigital Industries Software investment.In addition, we offer a unique Serviceto Ownership partnership program tosuccessfully transition clients from a servicemodel to full ownership of the software.Our consulting work consists of discovercalls, software demonstrations, and onsitevisits to perform gap analyses. The gapanalysis involves working with customers tounderstand their current environment versuswhere they want to be, to meet their goalsand stay competitive. In addition, we haveresources available to install and implementany of the Siemens software tools.The Service to Ownership program isperfect for smaller companies that questionif they have enough work to justify a softwareinvestment, or if they have the internal abilityto use the tools. We complete a small projectfor the client with the software, while theylook “over our shoulder” and build the ROIcase for acquiring the software. With thesecond project, we work shoulder-to-shoulderwith the client by providing online supportwhile they learn to use the tool in their ownprocesses. By the third project, the client hastaken ownership of the software, and ourrole is to “look over their shoulder” to assistas needed and guarantee that they have asuccessful conclusion. By this point you areup and running and your team is full engaged,ready to assume full control with totalconfidence.Unparalleled SupportGeometric Solutions is your first line ofsupport for Siemens software, with a directline to Siemens for any issues requiringadditional support. Tech support is providedby experienced Application Engineers Mondaythrough Friday, 8am – 5pm EST, and isavailable through our toll-free support line844-GEO-SUPT (844.436.7878) or via email attechsupport@geoplm.com.In addition, we provide complimentary “Lunch& Learn” sessions to keep your skills up-todate on Siemens Digital Industries Software.Custom TrainingWe offer a variety of standard and customized training options, including instructor-ledclassroom training, web-based training, and onsite training. Classes are held at our officelocations in Chicago, Indianapolis, and Warren (Detroit), or at the customer’s location.Our web-based training options include instructor-led GoToMeeting sessions or can be selfpaced using the Siemens Learning Advantage portal. The benefits of web-based training is thatit can be broken up into increments and spread out over time, allowing users to maintain theirtypical daily workload. Classes are scheduled at customer request and are usually reserved forindividuals that are part of the same company.Our most flexible training option involves bringing the classroom onsite to your facility. Withthis option, we can build a customized curriculum tailored to your needs, as well as offeringindustry-specific tutorials. Depending upon proximity and duration, this option can containadditional expenses for travel and lodging.We’re available by phone (844-GEO-SUPT) or email (techsupport@geoplm.com)geoplm.com
CAD-Neutral Visualization & Collaboration Teamcenter is a true CAD-neutral platform that manages the associativity between native CAD files and the CAD-neutral JT format. This allows the creation of multi-CAD parts and assemblies, and extends design data across the organization and externally to see product as it changes.
May 02, 2018 · D. Program Evaluation ͟The organization has provided a description of the framework for how each program will be evaluated. The framework should include all the elements below: ͟The evaluation methods are cost-effective for the organization ͟Quantitative and qualitative data is being collected (at Basics tier, data collection must have begun)
Silat is a combative art of self-defense and survival rooted from Matay archipelago. It was traced at thé early of Langkasuka Kingdom (2nd century CE) till thé reign of Melaka (Malaysia) Sultanate era (13th century). Silat has now evolved to become part of social culture and tradition with thé appearance of a fine physical and spiritual .
On an exceptional basis, Member States may request UNESCO to provide thé candidates with access to thé platform so they can complète thé form by themselves. Thèse requests must be addressed to esd rize unesco. or by 15 A ril 2021 UNESCO will provide thé nomineewith accessto thé platform via their émail address.
̶The leading indicator of employee engagement is based on the quality of the relationship between employee and supervisor Empower your managers! ̶Help them understand the impact on the organization ̶Share important changes, plan options, tasks, and deadlines ̶Provide key messages and talking points ̶Prepare them to answer employee questions
Dr. Sunita Bharatwal** Dr. Pawan Garga*** Abstract Customer satisfaction is derived from thè functionalities and values, a product or Service can provide. The current study aims to segregate thè dimensions of ordine Service quality and gather insights on its impact on web shopping. The trends of purchases have
Teamcenter Plant data can be managed and further processed through Teamcenter Check-out & check-in in PDMS, Teamcenter Revision management in Teamcenter Change Management in Teamcenter Geometry (JTs) of Equipment, piping, cable trays and HVAC etc. Lightweight visualization synchronization for digital mockup Mapping
3D visualization, community collaboration, supplier management and collaborative product data management (cPDM) to drive business productivity. Teamcenter’s SOA services provide a new coarse grained interface to Teamcenter’s Business Logic Server. Teamcenter SOA framework enables customers to integrate Teamcenter capabilities
Follow up Training: Teamcenter Integration for NX Users, Managing Systems Design using Teamcenter, Teamcenter Installation, Teamcenter Data Model Administration, Teamcenter Data Model Administration Overview The Change Management for Users training focuses on executing the process of proposal, validation and approval of
