Rivertrace

SMART BILGE Clean Ballast Water Discharge Bio Fuel Approved Easy InstallationSmart ODME Pump - Measuring CellMEASUREMENTOil types:As Per MEPC 108(49) MEPC 240(65) requirementsClean water calibration:AutomaticOil measurement range:0 - 1000 ppm all typesResolution:1 ppmAccuracy oil solids:As Per MEPC 108(49) requirementsDATA STORAGE AND RETRIEVALData retrieval:via LCD display or download to PC using Hyperterminal orRivertrace IMOLog downloader programmeSYSTEM AND SUPPLYSupply voltage:115 / 230V ac, 50 - 60Hz (Switchable)Zener Barrier/Computer Module:115 / 230V ac, 50 - 60Hz (Switchable)Motor:380-440V ac, 50-60Hz, 3 phase, 250WSupply voltage Consumption: 50 VA Single PhaseApprovals:MEPC 108 (49) - DNV GL, GL USCG, ABS, CCS, NKK andBV, MEPC 240(65) - DNV GLSMART WIOSpecifications and system descriptions accurate at time of printing.These are subject to change.OCD CWSmart ODME Zener Barrier Module D 50MOCD XTRAThe Oil Discharge Monitoring Equipment (SmartODME) has been designed to provide means ofmonitoring, recording and controlling the ballastdischarge for crude oil, product and chemicaltankers including ICE class vessels. This system ismodular in construction and does not require theusual pump/motor bulkhead penetration as usedon older systems. The Smart ODME includes allcomponents required to meet MEPC 108(49)and the latest MEPC 240(65) for Bio Fuels,effective 1 January 2016.The Smart ODME incorporates a ‘simulationmode’ to aid system demonstration to PSCsurveyors, is designed for ease of retrofitting,operation, installation and maintenance.Discharge limits are set at 30 litres of Oil pernautical mile or 1 / 30,000 of the previous cargofor slop and wash water discharges.SMART ESM Tank Wash Water DischargeSMART 50M Slop Water DischargeSPECIFICATIONSMART TURBIDITYAPPLICATIONSSMART ODMESMARTSAFE ORBSMART PFM 107SMART ODME Oil Discharge Monitoring

SMART BILGE0.1 pH0.1NTU up to100 NTU, 1NTUthereafter.NUMBER OF SAMPLE POINTSone common sample lineMEASURING PRINCIPLEUV FluorescenceCABINET DIMENSIONS (EXTREME WIDTHS)(WXHXD)1090 x 971 x 369 mmCABINET WEIGHT93 KgSUPPLY VOLTAGE115 or 230 VAC 50/60 HzOUTPUTS1x 4-20mA for each parameter (PaH, Turbidity, Temperature andpH)1 x Volt free fault relay for each parameter (PaH, Turbidity,Temperature and pH)Individual common fault alarm relays and 1x general fault alarmrelayFEATURES PAH Measurement is compensated for turbidityWith the IMO’s 2020 global sulphur cap fastapproaching, a popular solution to ensurecompliance is to install an exhaust gas cleaningsystem (EGCS).For this, wet scrubber systems use wash waterto remove the pollutants from the exhaust gas.Therefore the wash water being discharged mustbe monitored at all times to ensure it is within thelimits set by the regulating body. There are IMOregulations for water quality parameters includingPolycyclic Aromatic Hydrocarbons (PAHs), pH andturbidity prior to discharge into the ocean.Rivertrace is an ISO 9001 Quality-AssuredCompany and market leader in Oil in WaterQuality Monitoring, with over 30 years’ experienceand your partner to ensure that the wash waterdischarged from your exhaust gas cleaningsystems is compliant with the global regulationson discharge.Our SMART ESM monitor developed byRivertrace, is suitable for both the inlet and outletof a wet exhaust gas cleaning system, measuringand recording PAH, Turbidity, Temperatureand pH, on open-loop, closed-loop and hybridscrubber systems.The SMART ESM is fully compliant with MEPC259(68) and provides reliable information to ensurecompliance with the worldwide SOx limits.www.rivertrace.compH ElectrodeSTORAGE Continuous real-time monitoring of wash water dischargeincluding PAH, turbidity, Temperature and pHInternal SD CardDownloadable to External USBIP RATINGIP66 On screen historical data graphs showing Instant/Hourly/Daily/Weekly figuresWETTED PARTS MATERIALAll PVC-U and Brass PumpSTANDARD SUPPLYSMART ESM MonitorFlow Meter and SwitchDebubblerStrainerAir RegulatorThree-way ‘T’ valveCabinetAPPROVALSDNV type approval (pending)SAMPLE INLET CONNECTIONFlange blanking ½” PN16/8 RFB 316/LSAMPLE OUTLET CONNECTIONSFlange blanking ½” PN16/8 RFB 316/LOptional ComponentsAIR CONNECTION10mm pipe Pressure RegulatorCLEAN WATER INLET CONNECTIONFlange blanking ½” PN16/8 RFB 316/LSAMPLE / CLEAN WATER TEMPERATURE RANGE0oC to *40oC*Higher available with a heat exchangerSAMPLE / CLEAN WATER PRESSURE RANGE1 to *4 Bar*Higher available with a pressure regulatorREQUIRED AIR SUPPLY PRESSURE RANGE4 - 6 BARCOMPRESSED AIR NORMAL / AVERAGECONSUMPTION450mL / HrSAMPLE / CLEAN WATER FLOW RATE RANGE0.4 to 4 LPMAMBIENT TEMPERATURE RANGE0 C to *50 C*Higher optional with a vortex cabinet cooler Automatic cleaning of optical path Plug and play maintenance design Easy calibration check kits or component replacement Heat Exchanger Motor / PumpSpecifications and system descriptions accurate at time of printing. These are subject to change.12www.rivertrace.com13SMART ESM Suitable for inlet and outlet monitoring5% of measurementreadingSMART 50M C ompatible with Open Loop, Closed Loop andHybrid systems0 - 500ACCURACYSMART TURBIDITY Systems suitable for both new ship and retrofit installationsTurbidity0 to 14SMART WIO Fully compliant with IMO MEPC 259(68)pH0μg/L to 4500μg/LOCD CW Ensures compliance of wash water discharge from shipEGCS is within regulatory limitsPaHRANGEOCD XTRAAPPLICATIONSOCD 50MSPECIFICATIONSMART ODMESMARTSAFE ORBSMART PFM 107SMART ESM Wash Water Monitor for Ship Exhaust Gas Cleaning Systems

SMART BILGE Boiler Feed ProtectionAccuracy: Heat Exchanger Leak DetectionLow rangeMedium range /- 0.15% /- 5 ppmAlarm 1 Operating Point: Produced Water Reuse - RO FeedWater, Steam Generator Feed WaterLow rangeMedium range1 - 10 ppm1 - 200 ppmAlarm 2 Operating Point: Industrial Wastewater/Groundwater dischargeLow rangeMedium range1 - 10 ppm1 - 200 ppmAlarm 1 Operating Delay:1 - 15 secondsAlarm 2 Operating Delay:1 - 600 secondsA versatile and sophisticated monitor to suit multipleapplications in marine and industrial environments.The Smart 50M uses a nephelometry based detectiontechnique and uses sophisticated algorithms to detectOil in the sample.The design of the measuring cell allows themonitoring of high temperature and high pressuresamples across multiple ranges of Oil Concentration.Auto-Clean and Auto-Zeroing functionality ensuresthe maintenance is minimal and that the measuringcell is kept free from fouling.The Smart 50M can provide the Oil Concentrationvalue to a DCS or PLC using a 4-20mA output.Alarm contact rating:8 AMP @230VACOutput signal:4-20 mAAmbient temperature:1-60 C / 34 – 122 FHumidity:Max 98% non condensingSample temperature:1 - 95 C / 34-203 FSample Flow:0.3 - 3 Ltrs per min / 0.079 - 0.79 Gal per minSample Pressure:1.0 Bar Minimum / 14.50 Psi3.0 Bar Nominal / 43.50 Psi10.0 Bar Maximum / 145 PsiClean Water requirements:0.3 - 3L per min / 0.079 - 0.79 Gal per min for ‘zeroing’As standard the following data is available: Oil Concentration Sample Pressure Sample Temperature Fault Status Alarm and Run statesWeight:15kg / 33.07 lbSize:500 x 360 x 150mm / 19.7” x 14.2” x 5.9”Supply voltage:115 - 230 VACPower consumption:15 VADegree of Protection:Approvals:IP56Tested to EN61010 EN61326 (CE), c UL us.SMART ESM0 - 10ppm0 - 200ppmSMART 50MLow rangeMedium rangeSMART TURBIDITYRanges: Lube Oil Cooler MonitoringSMART WIO Hydrocarbon Leak DetectionSPECIFICATIONOCD CWAPPLICATIONSSMART ODMESMARTSAFE ORBSMART PFM 107SMART 50M Oil in Water Monitorwww.rivertrace.com14www.rivertrace.com15OCD 50MOCD XTRASpecifications and system descriptions accurate at time of printing. These are subject to change.

SMART BILGE0 - 100 NTUAccuracy: /- 1 NTUResponse time: 5 secALARMSBy utilising the “Smart Cell” DetectorArray Technology, developed byRivertrace, the monitor accuratelyanalyses the quality of the samplestream and outputs the turbidity valuein nephelometer turbidity units (NTU)Turbidity is the cloudiness or hazinessof a fluid caused by large numbers ofindividual particles.A manual cell cleaning device isincluded as standard to easily enableroutine maintenance and preventOptical cell fouling which is recognisedas a leading cause of monitormalfunction or incorrect reading. Bysimple operation of the manual cleaningdevice, the measuring cell remains inoptimum operating condition.Replacement calibrated measuringcells can be purchased for easy changeover and calibration verification kitsenable the user to demonstrate themonitor is within factory calibration.The Smart Turbidity Monitor isalso available for Hazardous areaEnvironments classified as Zone 1 & 2.OPTIONS All options can be ordered from new or retrofittedto existing Rivertrace Smart Cell monitors.AUTOCLEAN The autoclean option hasbeen designed to ensure that the measuringcell glass tube is kept free from fouling. Cellfouling is recognised as a leading cause ofmonitor malfunction. Fitting the Autocleanremoves the need for the ship’s crew toremember to clean the cell manually.Alarm 1 set point:1 – 100 NTU user adjustableAlarm 2 set point:1 – 100 NTU user adjustableAlarm 1 delay:0 – 5 seconds user adjustableAlarm 2 delay:0 – 600 seconds user adjustableINPUT / OUTPUTAnalogue output:Active 4-20mA / 0 - 20mADATA STORAGE AND RETRIEVALCALIBRATION CHECK The monitor’scalibration can be checked using ourcalibration check kit. This is an approvedmethod of demonstrating thatthe unit is still working correctly.Calibration data storage:Stored in cell assemblySYSTEM AND SUPPLYSupply voltage:115 or 230V AC, 50 – 60Hz (24V AC & 12V DC available)Supply voltage Consumption: 50 VASupply voltage tolerance: /- 15%Projected life: 50,000 hrsProtection class:IP 65Weight:3.2 Kg / 7.05lbSpecifications and system descriptions accurate at time of printing. These are subject to change.www.rivertrace.com16SMART ESMTurbidity range:SMART 50M /- 2 NTU of factory set valuesSMART TURBIDITYClean water calibration:SMART WIO Groundwater EffluentMEASUREMENT17OCD CW Brewing Quality MonitorOCD XTRA Sewage Treatment Plant Effluent MonitorSPECIFICATIONOCD 50MAPPLICATIONSSMART ODMESMARTSAFE ORBSMART PFM 107SMART TURBIDITY Turbidity Monitor

SMART BILGESMARTSAFE ORBSMART PFM 107SMART WiO Water in Oil SensorPower Supply18 32 VDC Condition monitoring Lubrication oil including: - 2 and 4 stroke engines - Compressors - Pumps - Gear boxes - TurbinesCurrent Consumption60mAPolarity ProtectionYesAlarm relaysPre-alarm at 50% humidityMain alarm at 90% humidityOutput Current 300mAOperating Temperature-25 to 85 0C Condition monitoring for Hydraulic oil including; - All machines using hydraulic oil up to 10barProtection DegreeIP67Analog Output: Water in Oil4 20 mA (equiv. 0 100% Humidity Linear)Analog Output: Temperature4 20 mA (equiv. 0 1000C Linear)Dimensions:125mm x 80mm x 57mmLocal IndicationLED Indicators The sensor measures the saturation of the oilindependent from the oil type and oil age No cleaning of the sensor is needed.Operating temperature-25 to 85 0CProtection degreeIP65Pressure resistance against medium10 barConnection typeG3/4” Male ThreadMaterialStainless Steel AISI 303; 1.4305Dimensions50mm x 187mmCable Length to Controller15mInsertion Length120mmLocal indicationLED IndicatorsOptionsIndicator Dial TemperatureIndicator Dial HumidityIndicator Dial typeAnalog needle typeIndicator Dial typeAnalog needle typeUnit of MeasurementDegrees CelsiusUnit of Measurement% HumidityRange0 – 1000CRange0% - 100% HumidityDimensions96mm x 96mm x 77mmDimensions96mm x 96mm x 77mmSpecifications and system descriptions accurate at time of printing. These are subject to change.18www.rivertrace.com19SMART 50MSMART TURBIDITYYesSMART WIO Takes the oil temperature into consideration inorder to measure the saturationWrong Polarity protectionOCD CW Early warning by using pre alarm and alarm - The PAV (Pre Alarm Value) is set to 50% humidity. - The MAV (Main Alarm Value) is set to 90%humidity.Sensor Probe SpecificationOCD XTRA Measures the absolute water content in oil.SMART ESMController SpecificationOCD 50Mwww.rivertrace.comAPPLICATIONSFEATURESThe working principle is a capacitive measurementoperating on absorption of water in oil. The physicalmeasured value is % Humidity. New oil has theability to hold a certain amount of dissolved water.The maximum water amount oil can hold is called“saturation point”. Above the “saturation point” freewater will fall out which can cause corrosion insideof the engine. The “saturation point” is influencedby temperature and other different factors like thecomposition of oil mineral or synthetic, formulationof additives and will change during the lifetime of theoil. The Water in Oil Sensor (WiO) is not measuringfree water or emulsion, which is detectable byregular Water in Oil test kits, it measures theabsolute water content in oil.The PAV (Pre Alarm Value) is set to 50% humidity.The MAV (Main Alarm Value) is set to 90% humidity.More than 100% humidity means free water ispresent. From this point regular Water in Oil test kitsbegin to measure.Normally in the field, the water in oil contentis measured by a Water in Oil test kit. The resultsare mostly 0.02% (or 100.02% humidity), thisvalue means free water content. If the WiO Sensorshows the main alarm, the value is higher than 90%humidity and damage could be caused to the engineif 100% humidity is reached.SMART ODMESPECIFICATION

SMART BILGE Industrial waste water Groundwater dischargeThe OCD CW is a low cost solution for simplecooling water monitoring applications, designed formonitoring engine cooling water and fresh watersystems. The system is widely used in refineriesand power stations when discharging their coolingwater to local rivers and the sea. Boiler condensatecan also be monitored with the addition of a cooler.With solids discrimination up to 50ppm theOCD CW provides repeatable accurate monitoringand can also be used in industrial waste waterapplications.Range:0-99ppmAccuracy: /- 2 ppmAlarm Operating Points:1 - 98ppm (adjustable)Alarm 1 Operating Delay:0 - 60 sec (adjustable)Alarm 2 Operating Delay:10 - 240 sec (adjustable)Alarm Contact Rating:8A @ 240V AC (inductive)Output signal:0-20mA, 4-20mA (820 Ω min load), 0-5V & 1-5V DC (50 KΩ min load)Ambient temperature:1 - 60 C / 34 - 1400FHumidity:90% RH Max @ 55 C / 1310FSample temperature:1 - 40 C / 34 - 1040FSample Flow:0.1 – 2 l/min / 0.026 – 0.53 gpmSample Pressure:0.1 to 10 Bar / 1.45 - 145 PSIWeight:2.25kg / 4.96 lbSize:215 x 242 x 73 mm / 8.5 x 9.5 x 2.9 InchesSupply voltage:2 models available 230V/115V AC and 24V ACSupply variation: 10% of Nom. VoltageConsumption:10 VA MaxDegree of Protection:IP 55Electrical installation (over voltage) classification:EN61010-IEC664 category 11SMART ESM Engine cooling waterSMART 50M Lube Oil Cooler MonitoringSMART TURBIDITYSPECIFICATIONSMART WIOAPPLICATIONSSMART ODMESMARTSAFE ORBSMART PFM 107OCD CW Oil in Water Monitorwww.rivertrace.com20www.rivertrace.com21OCD 50MOCD XTRAOCD CWSpecifications and system descriptions accurate at time of printing. These are subject to change.

SMART BILGEFactory calibrated on up to 6 different oil typesClean water cal: /- 10 ppm of factory set valuesOil range:0 - 200 ppm Re-injection or Water Flood Water Quality ControlResolution:1 ppm, 1ntu Process ControlAccuracy oil range: /- 5ppm up to 50ppm thereafter 10% of readingSolids discrimination:100 ppm minimum (any calibrated solid type)Oil alarm setpoints:2 x 1 - 200 ppm - user adjustableAlarm Contacts:2 single pole Alarm Relays 8A @ 250V acFault Contact:1 single pole Alarm Relay 8A @ 250V acAnalogue output:isolated 0 - 20mA, 4-20mA, 0-5V dcRemote input:remote Start / Stop function available with latching switch Produced Water Reuse - RO Feed Water Industrial Wastewater DischargeThe “OCD Xtra” combines multiple lightwavelengths with multiple sensor technology, tomeasure oil accurately in the range 0-200 ppm,even in the blackest of produced water.Multiple oil types are automatically compensatedfor by sophisticated algorithms. The multiparameter display shows the sample’s oil content,pressure and a graphical average of the last 4 hoursoil readings. The last 7 days readings are stored inROM and can be accessed from the help menu.The OCD Xtra has the ability to adjust thecalibration settings against laboratory analysis onsite. Full on screen help is available to guide theoperator during set-up and maintenance routines.Environmental and SampleAmbient Humidity:90% RH Max @ 50 C / 122 FAmbient temperature:0 - 45 C / 32 - 113 FSample temperature:0 - 60 C / 32 - 140 FSample flow rate:0.5 - 4 L per min / 0.13 - 1.06 gal per minSample pressure:3 - 10 bar / 44 - 145 psiSystem and SupplyProtection class:IP 65Approvals:tested to EN61010 EN61326 (CE), c UL us.Weight:25 kg / 55 lbSupply voltage:24V ac, 115 or 230V ac, 50 - 60Hz ( /- 10%)Consumption:60 VA maxAuto clean air Supply (pneumatic only):4 bar / 58 psiVariationsSMART ESM Oil/Water Separator dischargeOil types:SMART 50M Drilling and Production Rig Slop Tanks/Deck DrainsSMART TURBIDITY FPSO/FSO/FSU Produced Water DischargeSMART WIOSPECIFICATIONOCD CWAPPLICATIONSSMART ODMESMARTSAFE ORBSMART PFM 107OCD XTRA Oil in Water Analyserwww.rivertrace.com22Specifications and system descriptions accurate at time of printing. These are subject to change.www.rivertrace.com23OCD 50MOCD Xtra purged systemOCD XTRAEach OCD Xtra is built to order according to specific stringent requirements.Atex and Intertek approvals. EExd electrical protection.Hazardous area Zone 1 or Zone 2 purged protection.

SMART BILGELow rangeHigh range0-10ppm Condensate0-200ppm Cooling Water Boiler Feed ProtectionAccuracy:Low rangeHigh range /- 1ppm /- 5ppm to 50 ppm, /- 10% thereafterAlarm Operating Points:Adjustable in 1ppm incrementsAlarm 1 Operating Delay:0 - 60 sec adjustableAlarm 2 Operating Delay:0 - 60 sec adjustableAlarm Contact Rating:5A/250V ACFault Relay:5A/250V ACOutput Signal:0-5v DC (1k ohm min.)4-20mA loop outputFEATURESProjected Life (Electronics): 50,000 HoursAmbient Temperature:-20 - 55 C / -4 - 131 F 0-10ppm or 0-200ppmSample Temperature:1 - 90 C / 34 - 194 FSample Flow:1 - 3 Litre per min / 0.26 - 0.79 Gal per minSample Pressure:0.1 - 10 Bar / 1.45 - 145 PsiWeight:17kg / 37.5 lbSize:484H x 420W x 156D mm / 19.1H x 16.5W x 6.1D InchesSupply Voltage: Display resolution of 1 ppm.110/230 V AC (Switchable)24V ac (optional)110V AC outlet supply:220 V AC High temperature optic cell glass and cell seals.220V AC outlet supply:440 V AC Stainless steel wetted parts.24V AC-outlet supply:48V ACEnvironmental Protection:IP55Autoclean Unit: Dry Compressed Air:4 - 6 Bar GApprovals:DNV-GL Heat Exchanger Leak Detection Produced Water Reuse - RO Feed Water, SteamGenerator Feed Water Industrial Wastewater/Groundwater dischargeA monitor designed to cater for the special conditionsassociated with high sample temperatures. Thisunit will detect oil in much smaller quantities withgreat reliability and repeatability. Increased boilerprotection from early detection of oil contamination.The OCD 50M is Type Approved by DNV-GL formarine use. It is a requirement of DNV-GL flaggedvessels that Boiler Condensate must be monitoredfor Oil Ingress. This is a simple and

Approvals: MEPC 107(49) – DNV-GL, USCG, CCS, Class NK, Russian Register, Transport Canada. Weight: 3.2 Kg / 7.05lb Specifications and system descriptions accurate at time of printing. These are subject to change. Exd Version SMART BILGE SMARTSAFE ORB SMART PFM 107 SMART ODME SMART ESM SMART 50M SMART TURBIDITY SMART WIO OCD