Parts List 4 Model AAT-18 And AAT-27 Auto-Adjust II Turbo .

2y ago
25 Views
2 Downloads
978.53 KB
12 Pages
Last View : 2d ago
Last Download : 2m ago
Upload by : Hayden Brunner
Transcription

MP-1073E Rev. 4 fJ A BTR Metering Systems CompanyParts List4" Model AAT-18 and AAT-27Auto-Adjust II Turbo-MetersParts List4" Model AAT-18 and AAT-27Auto-Adjust II Turbo-MetersWorking Pressures: 175, 275, 720 & 1440 psi Copyright 1998, Equimeter Inc.

(Jqq, ,:fj A BTR Metering Systems Company4 11 MODEL AAT-18 AND AAT-27 AUTO-ADJUST II TURBO-METERSGENERALASSEMBLYBody Assembly 11213311121214141151617184121PART DESCRIPTIONPART NUMBERMain Body Assy., Aluminum, 175# W.P., w/ Badges Less Nose ConeMain Body Assv., Cast Steel, ANSI 150, 275# W.P., w/ Badaes Less Nose ConeMain Body Assy., Cast Steel, ANSI 300, 720# W.P., w/ Badges Less Nose ConeMain Bodv Assy., Cast Steel, ANSI 600, 1440# W.P., w/ Badges Less Nose ConeMain Body Assy ., Cast Steel, ANSI 600, 1440# W.P., w/ Badges Less Nose Cone, w/Ring Joint FlanaesNose Cone With Straightening Vanes, All PressuresNose Cone Retainer, #8-32 x 3/a"Long Truss Head Stainless Steel Machine ScrewMfg . Nameplate, 175# W.P.AAT-18Mfg. Nameplate, 275# W.P.AAT-18Mfg . Nameplate, 720# W.P.AAT-18Mfg. Nameplate, 1440# W.P.AAT-18Mfg . Nameplate, 175# W.P.AAT-27Mfg. Nameplate, 275# W.P.AAT-27Mfg . Nameplate, 720# W.P.AAT-27Mfg. Nameplate, 1440# W.P.AAT-27Manufacturer Nameplate Drive Screw, #4 x 3/1a"Long Round Head, BrassTop Plate to Bodv, "O" RinQ, 175# W.P., BunaTop Plate to Bodv, "O" Ring H .P. VitonTop Plate to Body, "O" Ring, H .P.Steel Pipe Plua, 1//'¼" Steel Nipple, #720 & 1440# W.P.1/ " Steel Couolina. #720 &1440# W.P.Inlet Badge (On Inlet Flange of Body)Inlet Badae Drive Screws, #2 x 1/s" Round Head, BrassInlet Badge (On Top Plate)Inlet Badoe Drive Screw, #0 x 1/s''Internal Mechanism BadaeInternal Mechanism Drive Screws, #0 x 1/a"C .S.A . BadgeAAT-18AAT-27C.S.A. BadgeC.S . A . Manufacturer Nameplate Drive Screw, #2 x 1 LonaBadae, Pulse Factor Ft3#8-32 x 11;' Long Round Head Stainless Steel Machine ScrewBadae, Pulse Factor 01006-32-073-02903001006-32-07 73-11 Recommended Spare Parts2 Main Body Assembly,lncludes Inlet and Body Badges Less Nose Cone/s

C:.IIHlm ,:t;J A BTR Metering Systems Company25INDEX PLATE ASSEMBLY3134 INDEX SHAFTAND GLAND ASSEMBLYIndex Plate Assembly Components 1111111113111PART DESCRIPTIONPART NUMBERIndex Shaft Gland Assembly (Includes Illustration Nos. 25 A-C)GlandBushina ffoo)Bushing (Bottom)Top Index Shaft DoaShear Pin, Top Index Shaft DoaIndex ShaftBottom Index Shaft DoaGasket, Index Plate to Too PlateIndex PlateCap Screw, Index Plate to Top Plate, 5/,s" -18 x ¾" Hex. Hd.Seal Cao Screw, Index Plate to Too Plate, 5/,s" -18 x 3/i' Hex. Hd.Wiring labelRetaining -02006-32-105-00950578"Recommended Spare Parts3

C#IIHlm ,:fJ A BTR Metering Systems Company4" MODEL AAT-18 AND AAT-27 AUTO-ADJUST II TURBO-METERS@FOLLOWER MAGNET ANDBEARING ASSEMBLY@ Top Plate Assembly-Mechanical A46B46C46D1111311211*471*481 491507511525354555621222 Recommended Spare Parts4DRIVER MAGNET HOLDERAND BEARING ASSEMBLYPART DESCRIPTIONTop Plate Assembly, Alumiunum, 175# W.P.Top Plate Assembly, Steel ANSI 150, 275# W.P.Top Plate Assembly, Steel ANSI 300, 720# W.P.Top Plate Assembly, Steel ANSI 600, 1440# W.P.Intermediate Gear Assembly, 100 CP/Rev. PlasticIntermediate Gear Assembly, 10 M3/Rev.Intermediate Gear Assembly, 1M3/Rev.Large Change Gear [Note: "XX" Refers to Gear Blank (Diameter) Size, yy Refers toNumber of Gear Teeth. Digits Must be Substituted for "XX' and "YY" When Ordering]Small Change Gear (See Note for No. 40 Above)Small Change Gear Nut, #4-40 Hexagonal Stainless SteelIntermediate Gear Output Dog (Top)Intermediate Gear Input Doa (Bottom)Intermediate Gear Retaining Screws. #8-32 x 3/au LonQ Fillister Head Stainless SteelFollower Magnet Assembly (Including Illustration Nos. 46A-D)Retaining RingBearingSoacerFollower MaQnet Holder Assembly With MaQnetDriver Maanet Well and Post Assemblv, 175# & 275# W.P. (Includes Illustration No. 48)Driver MaQnet Well and Post Assembly, 720# & 1440# W.P. (Includes Illustration No. 48)Driver Maanet Well "O" RinaDriver Magnet Well o RinQ, VitonDriver MaQnet Well TetrasealDriver Maanet Well Tetraseal, VitonCap Screw, Top Plate to Body, 175# W.P., ½"-13 x 1 1/4"LonQ Hex. Hd.Cao Screw, Top Plate to Body, 275# W.P., 1/{'-13 x 11/4"Lona Hex. Hd.Cao Screw, Too Plate to Bodv, 720# & 1440#W.P., 3/.''-10 x 2"Lona Hex. Hd.Seal Cap Screw, Top Plate to Bodv, 175#W.P., 1/2"-13 x 11/4"lonQ Hex. Hd.Seal Cap Screw, Top Plate to Bodv, 275#W.P., 1/{'-13 x 11/,{'Lona Hex. Hd.Seal Cap Screw, Top Plate to Body, 720# & 1440# W.P., 3/J'-10 x 2" Long Hex. Hd.Vent Cao AssemblvExtractor Bracket AssemblvBlock Retainina Screws #8-32 x 3/."Lona Fillister Head Stainless Steel Machine ScrewAdaoter Plate Screw #8-32 x 3/J' Fillister HeadBushingPART 2-303-81006-32-212-40006-32-212-02006-32-212-42 3371906847066-32-113-01

C.IIHI ,:fj A BTR Metering Systems CompanyCOUPLINGSHAFTTOP VIEW 1112.5'1311PART NUMBERPART DESCRIPTION#4-40 x 11.' Pan Head Stainless Steel Machine ScrewSerial No. BadgeInternal Housina Assembly, Calibrated With Chanae Gears, 175# W.P., Cubic FootInternal Housina Assembly, Calibrated With Chanae Gears, 175# W.P. MetricInternal Housina Assembly, Calibrated With Chanae Gears, H .P., Cubic FootInternal Housina Assembly, Calibrated With Cha nae Gears, H.P., MetricInternal Housina Assemblv, Calibrated With Chanae Gears, 175# W.P., Cubic FootInternal Housing Assembly, Calibrated With Change Gears, 175# W.P., MetricInternal Housina Assembly, Calibrated With Chanae Gears, H.P., Cubic FootInternal Housina Assemblv, Calibrated With Chanae Gears, H.P., MetricDriver Magnet Holder & Bearing Assembly (Includes Illustration Nos. 63 A-D)Bearina Retainina RinaBearingSpacerDriver Magnet & Pin AssemblyAdapter PlateCouolina Shaft Assembly, 175# & 275# W.P.Couplina Shaft Assembly, 720# & 1440# W.PRetainina RinaShoulder ScrewMain (Metering) Rotor AssemblyMain (Metering) Rotor AssemblyCenter PlateCenter PlateSensor Rotor AssemblySensor Rotor Assembly#4-40 x 5/s" Lona Fillister Head Stainless Steel Machine ScrewTubina For Lubrication SystemTee, 1/a"PolypropyleneTetraseal, Viton"O" Ring, Buna"0" Rina, VitonDisc SerinaCompression RingPressure TubinaClio For WiresComoression Rina LubricantOil Tube Replacement Assembly (Not Shown)Retrofit Adapter Kit (Not commended Spare PartstS.O.-302 Only. Illustration Nos. 68, 69 and 70 affect calibration. These components must be ordered in combination as a 302 Assembly and cannot be supplied as separate items.tThese items affect calibration and must be ordered in combination with Sensor Rotor Assembly, Center Plate and Internal Housing, as a 302 Assembly.5

C.Q.lllfff t:flJ A BTR Metering Systems Company4" MODEL AAT-18 AND AAT-27 AUTO-ADJUST II TURBO-METERSSECTION A-ATOP VIEWBEARING BRACKETINLET VIEWSIDE VIEW6

JqHlffl r:fJ A BTR Metering Systems CompanyMain (Metering) Rotor Assembly 2111,33431532112PART NUMBERPART DESCRIPTIONMain Rotor Assembly (Includes Illustration Nos. 90-136)Main Rotor Assembly (Includes Illustration Nos. 90-136)LockinQ PinBearing Bracket & Pin AssemblyShaft (Main Rotor) w/ WormShaft (Main Rotor) w/ WormWormwheelWormwheelShaft (Wormwheel)Cover (Oil Reservoir)Hub (Wormwheel)Drive GearDrive GearSpherical Washer (Main Shaft)Sensor HolderGear RetainerGear PostRetaining NutBearing RetainerChopper AssemblyUpshaft GearUpshaft GearRotor & Hub AssemblyRotor & Hub Assembly#4-40 x 1 /."Long Round Head Stainless Steel Machine ScrewOil Wick, .09 x .09#4-40 x 1 /,!' Lona Pan Head Stainless Steel Machine ScrewBall Bearing, Top Wormwheel ShaftBall Bearing, Bottom Wormwheel ShaftBall Bearing, Downstream Rotor ShaftBall Bearina, Uostream Rotor ShaftSwitch Assembly#2-56 x 1 /a" Hexaaonal Stainless Steel Set Screw, Nvlon Lockina#0-80 x 5 Flat Head Stainless Steel Machine Screw#5-40 x 1/."Round Head Stainless Steel Machine Screw#2-56 x 1/."Round Head Stainless Steel Machine ScrewLocknutCarrier Assembly (Includes Illustration Nos. 120-129)Carrier Assembly (Includes Illustration Nos. 120-129)Bearina Bracket Carrier, Without Heli Coil InsertsFilter ScreenRetaininq RingOil TubeShield TubePressure Tap TubeVane Inserts#6-32 x 1 /."Long Machine ScrewModule Seal Positioner#5-40 x 7/,,!'Fillister Head Stainless Steel Machine Screw"O" Ring#5 Internal Lockwasher, Stainless Steel#2 Internal Lockwasher, Stainless Steel#4 External Lockwasher, Stainless SteelSeal-Oil Passage#4-40 x 1 /a" Long Stainless Steel Set Screw, Nylon 78006-36-160-09950305 Recommended Spare PartstThese items affect calibration and must be ordered in combination with Sensor Rotor Assembly, Decoupling (Center) Plate and Internal Housing, as a 302 Assembly.7

Jq11fm ,:t;J- A BTR Metering Systems Company4" MODEL AAT-18 AND AAT-27 AUTO-ADJUST II TURBO-METERS --- -;Ll -- -.:.TOP VIEW OUTLET VIEW(W/ CARRIER ASSEMBLY REMOVED)SIDE VIEW8

C.IIHlffl r:fJ-A BTR Metering Systems CompanySensing Rotor Assembly 54155* 3174175176177178131211312211111152333146147 QTY.REQ'DARARARPART NUMBERPART DESCRIPTIONSensina Rotor Assemblv (Includes Illustration Nos. 145-175)Sensina Rotor Assemblv (Includes Illustration Nos. 145-175)Bearina BracketSensina Rotor ShaftOil Wick CoverSpherical WasherSlot Sensor HolderBearinQ RetainerChoooer Assemblv (Includes Illustration No. 157}Rotor & Hub AssemblyRotor & Hub Assemblvlockino Pin#2-56 x 1/e' Round Head Stainless Steel Machine ScrewSwitch AssemblvBall BearinQ for Rotor Shaft#4-40 x 1/e''Cuo Point Stainless Steel Set Screw, Nvlon Lockino#0-80 x 5/,s" Flat Head Stainless Steel Machine ScrewRetainino RinQLocknut#4-40 x 1//' Round Head Stainless Steel Machine Screw#4-40 x 3/s" Flat Head Stainless Steel Machine ScrewOil Wick, .09 x .09Carrier Assemblv [Includes Illustration Nos. 165, 168, (1) 159, and (1) 1751OilinQ Tube (Not Shown)Tetraseal, Viton"O" Rina"O" Rina, Buna#4 C Sink, External Lockwasher#4 External lockwasher, Stainless Steel#2 Internal lockwasher, Stainless Steel#4-40 x 1'4'' Lona Flat Head Stainless Steel Machine ScrewFilter Screen Stainless SteelOil 4 oz. Bottle (Not Shown)Oil, 1 Qal. Can (Not Shown)Lubrication Hand Gun (Not Shown}I AAT-18I AAT-27I AAT-18I 3-01006-22-405-01006-22-405-02006-24-400-00 Recommended Spare PartstThese items affect calibration and must be ordered in combination with Main Rotor Assembly, Decoupling (Center) Plate and Internal Housing, as a 302 Assembly. 9

C#IIRlm ,:fJ A BTR Metering Systems Company4" MODEL AAT-18 AND AAT-27 AUTO-ADJUST II TURBO-METERSExternal Lubrication System FittingsILL.NO.QTY.REQ'D180181PART DESCRIPTIONPART NUMBER1Lubrication Gun Fitting9078871Hex Bushing18211831Valve,1/4 "Carbon Steel H.P.950759950710Valve, 1/4"Brass, #175 W .P.Pipe Nipple, 1/4"x 3"Steel H.P.950428950760Nipple,904765"x '//'Brass #175 W.P.1/4TOP PLATEElectrical System FittingsILL.NO.QTY.REQ'D185PART DESCRIPTIONPART NUMBER1Terminal Block9503641863#8-32 x 3/s" Long Fillister HeadStainless Steel Machine Screw9033711874External Lock Washer950371188218911901"O" Ring946881"O" Ring Viton902418#8 Stainless Steel WasherFeed-through Assembly950448950588Feed-through Assembly, Viton006-32 -317-00750155800633191ARSolder, Bar Form, 50/50,1/;' dia ., 2 pc.192ARShrink TubeTOP PLATE SECTIONExternal Wiring FittingsILL.NO.QTY.REQ'D195196197198199CONDUIT TYPE10PLUG-IN TYPE2004PART DESCRIPTIONPART NUMBERGasket#8-32 x ¼" Long Round HeadStainless Steel Machine ScrewCap & Chain Assembly forPlug-in ConnectorPlug-in Connector, Female End(Not Shown)Plug-in Connector, Male EndWith Wirin To Terminal BlockConduit Adapter Assembly, 1 /,"-14NPT With Wiring To Terminal Block905321903055006-32-131-00

C.11 , r:,;J A BTR Metering Systems Company@-----GREEN----BLACKTERMINALBLOCK CJSENSING ROTOR950563FEEDTHRUASSEM.(§ MAIN ROTOR[l1J950237AAT-18 and AAT-27 TURBO-METERWIRING SYSTEM COMPONENTSOUTPUT WIRINGTO AUTO-ADJUSTELECTRONICSCONNECTOR:PIN:DC INPUT WIRINGFROM METER(§) (§)BROWNSENSING, NEG.SENSING ROTORWHITESENSING,POS.BLACKMAIN,NEG.A PLUG-IN CONNECTORMALE ENDEMAIN ROTORREDMAIN,POS.GREENGROUNDTERMINAL BLOCK WIRING DETAIL(FOR PLUG-IN OR CONDUIT TYPE CONNECTORS}11

805 Liberty BoulevardDuBois, PA 15801814-375-8875Fax 814-375-8460Authorized DistributorLimited WarrantySeller warrants the Goods to be free from defects in materials manufactured by Seller and in Seller’s workmanship for a period of one (1) year after tender of delivery (the “Warranty Period"). THISLIMITED WARRANTY (a) IS IN LIEU OF, AND SELLER DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, STATUTORY, EXPRESS OR IMPLIED, INCLUDING, WITH LIMITATION, ANYWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR OF CONFORMITY TO MODELS OR SAMPLES; (b) does not apply to any Goods which have been (I)repaired, altered or improperly installed; (ii) subjected to improper use or storage, (iii) used or incorporated with other materials or equipment, after buyer or anyone using the Goods has, or reasonablyshould have, knowledge of any defect or nonconformance of the Goods; or (iv) manufactured, fabricated or assembled by anyone other than Seller, (c) shall not be effective unless buyer notifies Seller inwriting of any purported defect or nonconformance with (thirty days) after Buyer discovers or should have reasonably discovered such purported defect or nonconformance; and (d) shall only extend toBuyer and not to any subsequent buyers or users of the Goods. Buyer shall provide Seller access to the Goods as to which Buyer claims a purported defect or nonconformance, upon request by Seller,buyer shall, at its own risk and expense, promptly return the Goods in question to Seller’s Plant. Sensus 2009Made the USA12-17-09

Auto-Adjust II Turbo-Meters Parts List MP-1073E Rev. 4 4" Model AAT-18 and AAT-27 Auto-Adjust II Turbo-Meters Working Pressures: 175, 275, 720 & 1440 psi (Jqq, ,: fj A BTR Metering Systems Company 411 MODEL AAT-18 AND AAT-27 AUTO-ADJUST II TURBO-METERS GENERAL ASSEMBLY Body Assembly Components ILL. QTY. PART DESCRIPTION

Related Documents:

SUNSIGHT AAT RF Panel Antenna Alignment System – AAT MODELS AAT30 & AAT15 Description of the AAT System The AAT is a battery operated tool that measures azimuth, tilt, roll and height. Typical use of the AAT is for aligning RF cellular panel antennas. The AAT kit comes with all the basic items needed to perform most antenna alignment tasks.

AAT Access – entry level 20 Introductory level 24 Intermediate level 28 Advanced level 32 AAT Bookkeeping and Computerised Accounting 38 AAT Bookkeeping 42 AAT Computerised Accounting 48. Why AAT? AAT Accounting Qualificatio

Task 1 (12 marks) Practice assessment model answers – MDCL . AAT is a registered charity. No. 1050724 Task 2 (15 marks) AAT is a registered charity. No. 1050724 Task 3 (15 marks) AAT is a registered charity. No. 1050724 Task 4 (12 marks) AAT is a registered charity. No. 1050724 Task 5 (18 marks) Q Model Answer (a) Materials variances The general price of materials may have risen since the .

- ASSOCIATION OF ACCOUNTING TECHNICIANS AQ2016 - AAT Professional Diploma in Accounting COURSE HANDBOOK AAT Level 4. AQ2016 - About AAT AAT works across the globe with around 130,000 members in more than 90 countries. Our members are represented at every level of the finance and accounting world, including students, people already working in accountancy and self-employed business owners. AAT .

This practice assessment is one of a set of five AAT mock practice assessments which have been published for this subject. They are produced by expert AAT tutors to ensure real AAT exam style and real AAT exam standard tasks and ensure the best chance of success. All practice assessments are relevant for the current syllabus.

targeted towards the style of AAT assessment questions.” NIGEL HUGHES, AAT LECTURER “I started using Osborne texts in 2012, and since then I have always used them. They are extremely user-friendly and coincide well with the AAT syllabus. The students are really pleased with them.” HUSSAIN PATEL, AAT LECTURER . Follow us Like us 8 Call us: 01905 748071 Email us: books@osbornebooks.co.uk 9 .

Our AAT Advanced Diploma in Accounting course is the intermediate level of AAT’s accounting qualifications. You’ll master more complex accountancy skills, including advanced bookkeeping, preparing final accounts, and management costing techniques. You’ll also cover VAT issues in business, and the importance of professional ethics - all without giving up your job, family time or social .

A programming manual is also available for each Arm Cortex version and can be used for MPU (memory protection unit) description: STM32 Cortex -M33 MCUs programming manual (PM0264) STM32F7 Series and STM32H7 Series Cortex -M7 processor programming manual (PM0253) STM32 Cortex -M4 MCUs and MPUs programming manual (PM0214)