Beissbarth MLD 815 - Saarloos Automotive Equipment

3y ago
25 Views
2 Downloads
1.44 MB
12 Pages
Last View : 1m ago
Last Download : 2m ago
Upload by : Azalea Piercy
Transcription

Headlight TestingBeissbarth MLD 815 –Digital headlight measurementand adjustment TÜV-certified (prototype technical release) Cross and alignment laser CMOS camera for real-time image processing Integrated printer

Wheel AlignmentDAS CalibrationLifts and Test BaysTire ChangersDigital headlight testing with MLD 815:Interactive color touch-screen display TÜV-certified (prototype technical release*) Cross and alignment laser for precise positioning For all light sources and glare-freehigh-beam systems (DLA**, Matrix) CMOS camera for real-time image processing Integrated printer Test results in real time Comparison between measured and limit valuesand unambiguous red/green evaluation Precise definition of the cut-off line withoutdisrupting blue fringe* TÜV certificate in line with StVZO § 50:MLD 815 is TÜV-certified by prototype technicalrelease examination in accordance with thedirectives for testing headlight adjustment/testequipment (German Road Traffic Type-ApprovalLaw StVZO §50 paragraph 5).** Dynamic Light Assist2

Wheel BalancersBreak Testers and Test LanesHeadlight TestersTire Tread MeasurementHeadlight Testingintelligent, fast and preciseImages displayed in real time D igital LCD colour display (5.7”)with 262,000 colours T ouch-screen function (operation withgloves is possible) I ntuitive and simple user guidance V isual and acoustic signals support themeasurement procedure Menu featuring 7 languagesCOMS camera with high resolutionand frame rate O perating panel can be rotated by 180 for different areas of application (e.g. forgeneral inspections or for the adjustmentat the workshop) Independent operation thanks to battery A ll types of light sources (xenon, bi-xenon,LED, bi-LED, halogen) Glare-free high beam (with MLD 815Integrated printerMatrix/DLA, order number 1 692 104 329) All types of vehicles (passenger cars, trucks,motorcycles) A ll types of headlights (main headlights,fog lamps, auxiliary lamps) Measuring height (optical center): 24 – 145 cm Measured values: Horizontal and vertical deviation(pitch angle), intensity, roll angle, yaw angle Digital precision: /-1 cm on a 10-metermeasuring distanceOperating panel can be rotated by 180 (operation with gloves is possible)3

Wheel AlignmentDAS CalibrationLifts and Test BaysTire ChangersLaser precision for accurate measurementTop precision thanks to laser technology T he alignment laser on the upper part of theMLD 815 column helps aligning the light boxwith the vehicle T he cross laser eases alignment with theheadlight particularly in case of LED and xenonlighting systems H igh-quality optics with large, scratch-proofglass lens (Ø 230 mm)Laser class 3RAlignment laserScratch-proof glass lens (Ø 230 mm)4Cross laserLight-box alignment with two-dimensional level

Wheel BalancersBreak Testers and Test LanesHeadlight TestersHeadlight TestingTire Tread MeasurementLeveling at the test area in accordancewith the current directiveEntsprichtneuestenMessplatz anforderungenGerman Road Traffic Type-Approval LawStVZO § 29 general-inspection headlight-test directive MLD 815 alignment (leveling) on the test areacomplies with the latest requirements placed ontest areas in workshops. Two-dimensional level for the horizontal levelingof the light box Levelable 3-wheel trolley Levelable rail system (3m) for above and in-groundinstallation as optional accessoryLevelable trolleyLevelable rail system (optional)5

Wheel AlignmentDAS CalibrationLifts and Test BaysTire ChangersState-of-the-art designfor precise working Lightweight design thanks to the finite element method (FEM) Super-simple height adjustment due to maintenance-freecounterweight system with quadruple-mounted rollers Easy guiding thanks to handles on the column (upperhandle) and at the light box (lower handle) Column can be turned 30 on the low-friction bush bearing Protected against dust and splash water Top mechanical stability for reliable transverse movement Height-measurement sensor (optional)(240 – 1 450 mm)The height-measurement sensor automatically measures the installation height of the headlight (240 to 1 450 mm) andshows the measured height on the display.6

Wheel BalancersBreak Testers and Test LanesHeadlight TestersTire Tread MeasurementHeadlight TestingTest results via Bluetooth with quickand neatly arranged results on the PCMeasured valueLimit valueAccurate display of the test results on the workshop computerOptional: visualization on the workshop computer Data transfer to PC via Bluetooth User interface eases intuitive operation Database function Printing and archiving Adjustment of the colour scheme by the user:light/dark depending on the lighting conditionsTest results on the tablet computerLight and dark background can be selected7

Wheel AlignmentDAS CalibrationLifts and Test BaysTire ChangersReliable checking and adjustmentof permanent high beamsAdjustment of a headlight with DLA high-beam assistant (test image via ECU diagnosis right on the vehicle)Adjustment of headlights with glare-free high beamCommunication with the vehicle:(e.g. Dynamic Light Assist DLA and Matrix Beam) Vehicle preparation and activation of the basic settingCurrently, the version MLD 815 Matrix/DLA (order number1 692 104 329) assists the operator at both of the commonvia OBD Triggering individual test images (see illustrationabove) using an application for ECU diagnosesprocedures: Mechanical adjustment of the vertical cut-off line (e.g. DLA) Information on the position of the cut-off line is sent Position of the vertical cut-off line read out by means of theback to the vehicle via application for ECU diagnosesMLD 815 software – with an accuracy level based on angularminutes (e.g. Matrix Beam)8(in case of Matrix Beam)

Wheel BalancersBreak Testers and Test LanesHeadlight TestersTire Tread MeasurementHeadlight TestingAdjustment of a headlight with Matrix LED technology (test image via ECU diagnosis right on the vehicle)Accurate display on theMLD 815 screen9

Wheel AlignmentDAS CalibrationLifts and Test BaysTire ChangersLeveled test bay LTB 100Test equipment in accordance with§ 29 StVZO – German general-inspectionheadlight-testing directiveLTB 100: Safe base for accurate measurementsLTB 100 complies with the well-defined tolerances andWorkshop floors often feature a significant slopedimensions given by the new headlight test directive:and unevenness. The LTB 100 levelable test bay The areas must not exceed the maximum allowedmeets all requirements the German general-inspectionheadlight-testing directive on rider 4, § 29 StVZOplaces on the test bay.inclination of 1.5 % and must be aligned. The headlight-tester set-up area must not exceed themax. unevenness of 1 mm on a 1-meter distance. The allowed unevenness of the tracks depends on thelength of the test bayInstallation as test lane or drive-through solution (optional)10LTB 100: Patented design for the 0 to 40 mm height adjustment for axleloads of up to 2.5 t

Wheel BalancersBreak Testers and Test LanesHeadlight TestersTire Tread MeasurementHeadlight TestingLeveled vehicle test bay LTB 100with rail-mounted Bosch MLD 815headlight testerLTB 100 at a glance:Scope of delivery Order number Suitable for subsequent installation onto theLTB 100 (4 m)* 1 692 100 030Extension 2 m 1 692 100 031workshop floor (min. installation height: 54 mm) Suitable for installation onto workshop pits (incombination with the optional pit drive-in protection)Special accessories Extendable for drive-through solution (optional)Set of drive-on ramps 1 692 100 032 Compensation and fine adjustment by means ofPit drive-in protection (4 m) 1 692 100 033Pit drive-in protection extension (2 m) 1 692 100 0374 wheel set-up elements (4-meter version) Maximum allowed axle load: 2.5 t Test-system length above ground: 4 269 mmService/assembly accessoriesService kit (assembly pattern; supporting pliers)** 1 692 100 034(4 m version incl. drive-on ramps) Adjustable height compensation: 0 to 40 mm* Screw anchors for the assembly are not included. Modular construction (4 m, optionally extendable to 6      ** Accessories can be reused for additional LTB units.Wheel base: 4 325 mm4m2mGeneral prerequisites concerning the propertiesof the foundation and the ground:Max. difference in height on 4 m/6 m: 0 – 40 mmThe ground must comply with Eurocode 2, DIN EN 1992 Concrete quality: at least C20/25 Please note the manufacturer specificationsLTB 100: Extension to 6 m (optional)11

Technical data MLD 815Orientation (in %, cm, )Low beamHigh beamTop and bottom, right and leftMeasuring height (optical centre above ground level)LCD colour screenCMOS cameraLaser classPlug voltage (input voltage ofthe battery charger)Candela0 - 150 000 Lux/1 m0 - 240 Lux/25 m0% - 10% (0 - 1 000 mm)0% - 10% (0 - 1 000 mm)0% - 6% (0 - 600 mm)240 - 1 450 mm5.7”, 262 000 colours640 x 480 VGA, Frame rate: 60 fps3R100 - 240 V / 50 - 60 HzSupply voltage (integrated battery)Operating temperature ( C)WeightSize of the device (W x D x H)12 V 5 bis 45 C35 kg660 x 695 x 1 780 mmOrder numbersMLD 815 Standard (with printer)MLD 815 DLA / Matrix (with printer)1 692 104 3231 692 104 329Optional accessoriesSoftware upgrade for glare-free high-beam systems(for MLD 815 Standard)Rail (3 m)Rail extension (1.5 m)Height-measurement sensorPC-Software with Bluetooth -KitCover1 692 105 1151 692 105 0801 692 105 1121 692 105 0661 692 105 1451 692 105 079Subject to technical modification and changes to scope of delivery. Pictures may sometimes show special accessories orsimilar versions. Please contact your Beissbarth dealer for a binding up-to-date quotation.Local distributor:Beissbarth GmbHA Bosch Group CompanyHanauer Strasse 10180993 Muenchen (Munich, Bavaria)GermanyTel. 49-89-149 01-0Fax 49-89-149 NLASER3RIEC/EN 60825-1:2014Po 5 mW ; λ 635 nmLabeling laser apertureOrder Nr. 1 693 601 018 Printnorm BB 227 / 26.04.2017 ENLight intensityllumination

Beissbarth GmbH A Bosch Group Company Hanauer Strasse 101 80993 Muenchen (Munich, Bavaria) Germany Tel. 49-89-149 01-0 Fax 49-89-149 01-240 www.beissbarth.com sales@beissbarth.com Order Nr. 1 693 601 018 Printnorm BB 227 / 26.04.2017 EN Light intensity Candela llumination 0 - 150 000 Lux/1 m 0 - 240 Lux/25 m Orientation (in %, cm, ) Low .

Related Documents:

Beissbarth Workshop Equipment for OEM garages. 2 WheelAlignment BrakeTesters VehicleTesting Tyre Changers WheelBalancers ACServiceUnits Lifts HeadlightTesting DAS-Tools Networking BEISSBARTH – TRADITION, INNOVATION A workforce of over 200 produces modern testing and service equipment for automotive workshops in compliance with the increasingly strict demands of the automotive industry. For .

Beissbarth workshop equipment . 2 Beissbarth takes possible technological adaptation of existing devices and / or utilisation of existing device components into the equation when designing new equipment in order that your service centre achieves maximum profitability. The quality of Beissbarth products is subject to stringent factory checks and specifications set out by official German .

Beissbarth Workshop Equipment Recommended by Volvo Cars. WheelAlignment BrakeTesters VehicleTesting TyreChangers WheelBalancers ACServiceUnits Lifts Networking 2 BEISSBARTH – TRADITION, INNOVATION. A workforce of over 200 produces modern testing and service equipment for automotive workshops in compliance with the increasingly strict demands of the automotive industry. For decades, we have .

Beissbarth Workshop Equipment. for OEM garages. 2. WheelAlignment BrakeTesters VehicleTesting Tyre Changers WheelBalancers ACServiceUnits Lifts HeadlightTesting DAS-Tools Networking . BEISSBARTH – TRADITION, INNOVATION. A workforce of over 200 produces modern testing and service . equipment for automotive workshops in compliance with the increasingly strict demands of the automotive industry .

Rexroth IndraDrive Integrated Safety Technology as of MPx-1x (Safe Motion) Application Manual DOK-INDRV*-SI3*SMO-VRS-APxx-EN-P 338920 Rexroth IndraDrive Rexroth IndraMotion MLD (2G) Libraries as of MPx-18 Reference Book DOK-INDRV*-MLD-SYSLIB3-RExx-EN-P 338916 Rexroth IndraDrive 2)Rexroth IndraMotion MLD (2G) as of MPx-18

Manual Lymphatic Drainage (MLD) MLD is a light and gentle manual modality performed by trained and certified therapist. MLD stimulates the activity of lymph vessels and enables the flow of lymph fluid. It follows alternate lymph drainage pathway following appropriate protocol. MLD sho

New Lenox Community Park District Administration Building (815) 485-3584 Lions Community Center (815) 485-1737 Fax (815) 485-3589 Spencer ACES Phone (779) 435-2446 Nelson ACES Phone (815) 666-5078 Tyler-Bentley ACES Phone (815) 666-5739 Haines-Oakview ACES Phone (815)

An expert meeting was held to review the impact of animal nutrition on animal welfare. During the meeting, three major tasks were undertaken for both ruminant and monogastric species: 1) Identify feeding options for different livestock production systems (extensive, mixed crop-livestock, and intensive) that improve animal welfare while increas - ing profitability of the livestock producers and .